Add Role Service installation failure - error code 0x80070643

We have a number of Windows Server 2008 R2 SP1 servers that we're attempting to add the IIS Role Service "IP and Domain Restrictions" onto.
They all fail with identical errors
Web Server (IIS): Installation Failed <error> Attempt to install IP and Domain Restrictions failed with error code 0x80070643. Fatal Error during installation.
2204: 2013-05-03 17:16:57.968 [CbsUIHandler]              Error: -2147023293 : 
2204: 2013-05-03 17:16:57.968 [CbsUIHandler]              Terminate: 
2204: 2013-05-03 17:16:58.109 [InstallationProgressPage]  Verifying installation...
2204: 2013-05-03 17:16:58.171 [CBS]                       ...done installing 'IIS-IPSecurity '. Status: -2147023293 (80070643)
2204: 2013-05-03 17:16:58.234 [Provider]                  Skipped configuration of 'IP and Domain Restrictions' because install operation failed.
2204: 2013-05-03 17:16:58.234 [Provider]                  
[STAT] ---- CBS Session Consolidation -----
[STAT] For 
          'IP and Domain Restrictions'[STAT] installation(s) took '18.1465176' second(s) total.
[STAT] Configuration(s) took '0.0020438' second(s) total.
[STAT] Total time: '18.1485614' second(s).
2204: 2013-05-03 17:16:58.390 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: False, Id: 170
2204: 2013-05-03 17:16:58.546 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147023293, Message: Attempt to install IP and Domain Restrictions failed with error code 0x80070643., AdditionalMessage: Fatal error
during installation
2204: 2013-05-03 17:16:58.687 [InstallationProgressPage]  Sync operation completed
2204: 2013-05-03 17:16:59.015 [InstallationProgressPage]  Performing post install/uninstall discovery...
One common fact here these servers have all been deployed from a Hyper-V template, servers build with all roles and features then Sysprep'd and stored in the SCVMM library as a template to deploy from.
Any ideas as right now it looks like we have to rebuild all of our nodes.
Regards

OK I think the CheckSUR log issue was a one off, I've now run this again against one of my other Hyper-V template IIS servers that has the same issue with Add / Remove role features and the log reports "No Errors Detected"
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-05-14 12:39
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 598
 No errors detected
So then just to double check I tries adding a role service and it failed, Here's the ServerManager.Log
name     : HTTP Redirection
state    : Changed
rank     : 4
sync tech: CBS
ant.     : empty
pred.    : Common HTTP Features
provider : WebServerRoleProvider
2956: 2013-05-14 12:56:35.166 [Sync]                      Calling sync provider of HTTP Redirection ...
2956: 2013-05-14 12:56:35.166 [Provider]                  Sync:: guest: 'HTTP Redirection', guest deleted?: False
2956: 2013-05-14 12:56:35.166 [Provider]                  Begin installation of 'HTTP Redirection'...
2956: 2013-05-14 12:56:35.166 [Provider]                  Install: Guest: 'HTTP Redirection', updateElement: 'IIS-HttpRedirect'
2956: 2013-05-14 12:56:35.182 [Provider]                  Installation queued for 'HTTP Redirection'.
2956: 2013-05-14 12:56:35.198 [CBS]                       installing 'IIS-HttpRedirect ' ...
2956: 2013-05-14 12:56:44.805 [CBS]                       ...parents that will be auto-installed: 'IIS-CommonHttpFeatures IIS-WebServer IIS-WebServerRole
2956: 2013-05-14 12:56:44.805 [CBS]                       ...default children to turn-off: 'IIS-HttpErrors IIS-StaticContent IIS-DefaultDocument IIS-DirectoryBrowsing
IIS-ApplicationDevelopment IIS-Security IIS-HealthAndDiagnostics IIS-Performance IIS-WebServerManagementTools IIS-ASPNET IIS-NetFxExtensibility IIS-ISAPIExtensions IIS-ISAPIFilter IIS-ASP IIS-RequestFiltering IIS-HttpLogging IIS-LoggingLibraries IIS-RequestMonitor
IIS-HttpTracing IIS-HttpCompressionStatic IIS-IIS6ManagementCompatibility IIS-ManagementConsole IIS-ManagementService WCF-HTTP-Activation '
2956: 2013-05-14 12:56:44.930 [CBS]                       ...current state of 'IIS-HttpRedirect': p: Staged, a: Staged, s: UninstallRequested
2956: 2013-05-14 12:56:44.930 [CBS]                       ...setting state of 'IIS-HttpRedirect' to 'InstallRequested'
2956: 2013-05-14 12:56:44.961 [CBS]                       ...current state of 'IIS-CommonHttpFeatures': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:44.961 [CBS]                       ...skipping 'IIS-CommonHttpFeatures' because it is already in the desired state.
2956: 2013-05-14 12:56:44.977 [CBS]                       ...current state of 'IIS-WebServer': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:44.992 [CBS]                       ...skipping 'IIS-WebServer' because it is already in the desired state.
2956: 2013-05-14 12:56:45.008 [CBS]                       ...current state of 'IIS-WebServerRole': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.008 [CBS]                       ...skipping 'IIS-WebServerRole' because it is already in the desired state.
2956: 2013-05-14 12:56:45.039 [CBS]                       ...current state of default child 'IIS-HttpErrors': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.039 [CBS]                       ...skipped child 'IIS-HttpErrors' because it is already installed
2956: 2013-05-14 12:56:45.070 [CBS]                       ...current state of default child 'IIS-StaticContent': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.086 [CBS]                       ...skipped child 'IIS-StaticContent' because it is already installed
2956: 2013-05-14 12:56:45.117 [CBS]                       ...current state of default child 'IIS-DefaultDocument': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.117 [CBS]                       ...skipped child 'IIS-DefaultDocument' because it is already installed
2956: 2013-05-14 12:56:45.148 [CBS]                       ...current state of default child 'IIS-DirectoryBrowsing': p: Installed, a: Installed, s:
InstallRequested
2956: 2013-05-14 12:56:45.148 [CBS]                       ...skipped child 'IIS-DirectoryBrowsing' because it is already installed
2956: 2013-05-14 12:56:45.164 [CBS]                       ...current state of default child 'IIS-ApplicationDevelopment': p: Installed, a: Installed,
s: InstallRequested
2956: 2013-05-14 12:56:45.180 [CBS]                       ...skipped child 'IIS-ApplicationDevelopment' because it is already installed
2956: 2013-05-14 12:56:45.195 [CBS]                       ...current state of default child 'IIS-Security': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.195 [CBS]                       ...skipped child 'IIS-Security' because it is already installed
2956: 2013-05-14 12:56:45.227 [CBS]                       ...current state of default child 'IIS-HealthAndDiagnostics': p: Installed, a: Installed,
s: InstallRequested
2956: 2013-05-14 12:56:45.227 [CBS]                       ...skipped child 'IIS-HealthAndDiagnostics' because it is already installed
2956: 2013-05-14 12:56:45.258 [CBS]                       ...current state of default child 'IIS-Performance': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.258 [CBS]                       ...skipped child 'IIS-Performance' because it is already installed
2956: 2013-05-14 12:56:45.336 [CBS]                       ...current state of default child 'IIS-WebServerManagementTools': p: Installed, a: Installed,
s: InstallRequested
2956: 2013-05-14 12:56:45.336 [CBS]                       ...skipped child 'IIS-WebServerManagementTools' because it is already installed
2956: 2013-05-14 12:56:45.367 [CBS]                       ...current state of default child 'IIS-ASPNET': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.367 [CBS]                       ...skipped child 'IIS-ASPNET' because it is already installed
2956: 2013-05-14 12:56:45.398 [CBS]                       ...current state of default child 'IIS-NetFxExtensibility': p: Installed, a: Installed, s:
InstallRequested
2956: 2013-05-14 12:56:45.398 [CBS]                       ...skipped child 'IIS-NetFxExtensibility' because it is already installed
2956: 2013-05-14 12:56:45.445 [CBS]                       ...current state of default child 'IIS-ISAPIExtensions': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.445 [CBS]                       ...skipped child 'IIS-ISAPIExtensions' because it is already installed
2956: 2013-05-14 12:56:45.461 [CBS]                       ...current state of default child 'IIS-ISAPIFilter': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.461 [CBS]                       ...skipped child 'IIS-ISAPIFilter' because it is already installed
2956: 2013-05-14 12:56:45.492 [CBS]                       ...current state of default child 'IIS-ASP': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.492 [CBS]                       ...skipped child 'IIS-ASP' because it is already installed
2956: 2013-05-14 12:56:45.523 [CBS]                       ...current state of default child 'IIS-RequestFiltering': p: Installed, a: Installed, s:
InstallRequested
2956: 2013-05-14 12:56:45.523 [CBS]                       ...skipped child 'IIS-RequestFiltering' because it is already installed
2956: 2013-05-14 12:56:45.555 [CBS]                       ...current state of default child 'IIS-HttpLogging': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.555 [CBS]                       ...skipped child 'IIS-HttpLogging' because it is already installed
2956: 2013-05-14 12:56:45.586 [CBS]                       ...current state of default child 'IIS-LoggingLibraries': p: Installed, a: Installed, s:
InstallRequested
2956: 2013-05-14 12:56:45.601 [CBS]                       ...skipped child 'IIS-LoggingLibraries' because it is already installed
2956: 2013-05-14 12:56:45.633 [CBS]                       ...current state of default child 'IIS-RequestMonitor': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.633 [CBS]                       ...skipped child 'IIS-RequestMonitor' because it is already installed
2956: 2013-05-14 12:56:45.664 [CBS]                       ...current state of default child 'IIS-HttpTracing': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.680 [CBS]                       ...skipped child 'IIS-HttpTracing' because it is already installed
2956: 2013-05-14 12:56:45.711 [CBS]                       ...current state of default child 'IIS-HttpCompressionStatic': p: Installed, a: Installed,
s: InstallRequested
2956: 2013-05-14 12:56:45.711 [CBS]                       ...skipped child 'IIS-HttpCompressionStatic' because it is already installed
2956: 2013-05-14 12:56:45.726 [CBS]                       ...current state of default child 'IIS-IIS6ManagementCompatibility': p: Installed, a: Installed,
s: InstallRequested
2956: 2013-05-14 12:56:45.726 [CBS]                       ...skipped child 'IIS-IIS6ManagementCompatibility' because it is already installed
2956: 2013-05-14 12:56:45.758 [CBS]                       ...current state of default child 'IIS-ManagementConsole': p: Installed, a: Installed, s:
InstallRequested
2956: 2013-05-14 12:56:45.758 [CBS]                       ...skipped child 'IIS-ManagementConsole' because it is already installed
2956: 2013-05-14 12:56:45.804 [CBS]                       ...current state of default child 'IIS-ManagementService': p: Installed, a: Installed, s:
InstallRequested
2956: 2013-05-14 12:56:45.804 [CBS]                       ...skipped child 'IIS-ManagementService' because it is already installed
2956: 2013-05-14 12:56:45.804 [CBS]                       ...current state of default child 'WCF-HTTP-Activation': p: Installed, a: Installed, s: InstallRequested
2956: 2013-05-14 12:56:45.836 [CBS]                       ...skipped child 'WCF-HTTP-Activation' because it is already installed
2956: 2013-05-14 12:56:45.851 [CBS]                       ...'IIS-HttpRedirect' : applicability: Applicable
2956: 2013-05-14 12:56:45.867 [CBS]                       ...'IIS-CommonHttpFeatures' : applicability: Applicable
2956: 2013-05-14 12:56:45.883 [CBS]                       ...'IIS-WebServer' : applicability: Applicable
2956: 2013-05-14 12:56:45.914 [CBS]                       ...'IIS-WebServerRole' : applicability: Applicable
2956: 2013-05-14 12:56:49.319 [CbsUIHandler]              Initiate:
2956: 2013-05-14 12:56:49.319 [InstallationProgressPage]  Installing...
2956: 2013-05-14 12:57:09.752 [CbsUIHandler]              Error: -2147023293 :
2956: 2013-05-14 12:57:09.752 [CbsUIHandler]              Terminate:
2956: 2013-05-14 12:57:09.939 [InstallationProgressPage]  Verifying installation...
2956: 2013-05-14 12:57:10.033 [CBS]                       ...done installing 'IIS-HttpRedirect '. Status: -2147023293 (80070643)
2956: 2013-05-14 12:57:10.158 [Provider]                  Skipped configuration of 'HTTP Redirection' because install operation failed.
2956: 2013-05-14 12:57:10.158 [Provider]                 
[STAT] ---- CBS Session Consolidation -----
[STAT] For
          'HTTP Redirection'[STAT] installation(s) took '34.8712425' second(s) total.
[STAT] Configuration(s) took '0.0035917' second(s) total.
[STAT] Total time: '34.8748342' second(s).
2956: 2013-05-14 12:57:12.517 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: False, Id: 146
2956: 2013-05-14 12:57:13.235 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147023293, Message: Attempt to install HTTP Redirection failed with error code 0x80070643., AdditionalMessage: Fatal error during
installation
2956: 2013-05-14 12:57:13.501 [InstallationProgressPage]  Sync operation completed
2956: 2013-05-14 12:57:13.735 [InstallationProgressPage]  Performing post install/uninstall discovery...
2956: 2013-05-14 12:57:14.079 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2956: 2013-05-14 12:57:14.407 [CBS]                       IsCacheStillGood: False.

Similar Messages

  • DHCP Installation Failure Error Code 1060

    I have performed a clean install of Windows Server 2012 Essentials, creating a new domain.
    I installed DHCP which was (apparently) successful, but when attempting to complete configuration I am presented with this error message:
    Installation of the DHCP Users or the DHCP Administrators security group failed with Error Code: 1060. The specified service does not exist as an installed service.
    A Google search was basically useless. I only found one page dealing with this error code:
    http://technet.microsoft.com/en-us/library/ee941205%28v=ws.10%29.aspx
    The "solution" given in the link above is as follows:
    To add the DHCP default local security groups
    Click Start, click All Programs, click
    Accessories, right-click Command Prompt, and then click
    Run as administrator.
    Click Yes if prompted by User Account Control, type
    netsh dhcp add securitygroups and then press
    ENTER.
    Attempting to do this resulted in the following message:
    The following command was not found: dhcp add securitygroups
    So I am at a standstill. I really need some help here, folks.

    Never mind. A reinstall of the server OS seems to have solved all of the problems.

  • Itunes installation failure, error code 80070246

    I was attempting to upgrade to the latest I tunes version, unfortunately the installation stops during the publishing product information stage. I am using Windows Vista, home edition 32 bit.
    While searching the help topics I have tried uninstalling itunes, quicktime, apple software update, apple mobile device support, bonjour and would have uninstalled apple application support if it showed up.
    After rebooting and attempting to reinstall (with another failure) I tried running Microsoft fix-it basic and advanced because I came across this fix in another article for this error code. Now not only can I not install Itunes, no updates show up in the history for Windows Update and when I run Windows Update it also fails with another error code 80080005.
    After spending 2 days working on this I am worse off than I was when I started, does anyone have any suggestions for what I should do next?

    A quick search of the error code shows a VBScript error. Perhaps this could help:
    http://www.appdeploy.com/msierrors/detail.asp?id=273

  • Get error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)

    I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
    Operating System is Windows 2008 R2 64 bit

    Hi JamesRead,
    According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
    you must have administrative rights on the computer.
    There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
    prompt and check if it can install successfully.
    You can prepare an installation of database engine instance to include product update:
    setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
    For more information, you can review the following article about installing Updates from the Command Prompt.
    http://technet.microsoft.com/en-us/library/dd638066.aspx
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Error code 0x80070643 dns role failed to install.

    I got error code 0x80070643 when trying to install dns...any help?

    Hi,
    Check out this post: http://social.msdn.microsoft.com/Forums/windowsserver/en-US/bdc4696b-b6a1-4d4a-832c-77ab03550848/attempt-to-install-dns-server-failed-with-error-code-0x80070643-fatal-error-during-installation?forum=winserver2008appcompatabilityandcertification
    Hope it helps you out.

  • FEP Error. Last Enforcement Error Code 0x80070643

    I have a Windows 2012 server running SCCM 2012 SP1 CU4.  I use it primarily for Endpoint Protection and Windows Updates.
    I have several Automatic Update Rules to deploy Endpoint definitions
    every night.
    I was going through some of the Deployments (to check for errors and such) when I saw that almost all of them had errors.  Under
    Monitoring --> Deployments I click on the Error
    tab and what I see is this:  Last Enforcement Error Code: 0X80070643 and it was dated 5/7/2014.
    My own PC was listed as having this error so I opened the System Center Endpoint Protection application.  I clicked on the
    Update tab and it shows Up to date with "Definitions last updated:  5/11/2014."
    Is this something I should worry about since the "successful" date is
    after the "error" date?  On my client PC, I looked at the
    EndpointProtectionAgent.log file, but did not see any errors.  Are there other log files I should look at to find more details about the error?
    I want to add that I also see this entry in the Event Viewer (under Event Viewer --> Windows Logs --> System):
    Installation Failure: Windows failed to install the following update with error 0x80070643: Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.173.1491.0).
    There are other successful messages in the Event Viewer after that message.  Maybe just something wrong with that particular update on that particular date??
    Thanks in advance!

    Thanks for the reply.  I saw that thread, but it does not apply to my particular issue. 
    I have already gotten Forefront Endpoint Protection installed successfully across my enterprise.  My problem is with a definition update.

  • PSE9 for Mac - Installation Failure Exit Code: 7

    I get the following message when I try to install (either from disk or from downloaded trial version):
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 16 error(s), 12 warning(s)
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    ERROR: 6952 Unable to preserve original file at "/Library/Fonts/MyriadWebPro-Italic.ttf" Error 0
    ERROR: 6952 Command ARKDeleteFileCommand failed.
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR:  - Elements Camera Raw: Install failed
    ERROR:  - Elements 9 Organizer: Failed due to Language Pack installation failure
    ERROR:  - Adobe ExtendScript Toolkit CS5: Install failed
    ERROR:  - Adobe XMP Panels CS5: Install failed
    ERROR:  - AdobeTypeSupport CS5: Install failed
    ERROR:  - AdobeHelp: Install failed
    ERROR:  - Elements 9 Organizer_AdobeElements9Organizer_en_US: Install failed
    ERROR:  - Adobe Linguistics CS5: Install failed
    ERROR:  - Elements Inspiration Browser: Install failed
    ERROR:  - AdobeCMaps CS5: Install failed
    ERROR:  - Adobe Photoshop Elements 9_LangPacken_US: Install failed
    ERROR:  - Adobe Photoshop Elements 9: Failed due to Language Pack installation failure
    I have tried all the suggestions that I found in other topics, but am still unable to install PSE 9.
    This seems to be a problem for other users.
    Is there a solution?
    Thanks.
    Jim

    Look for this file or folder on your machine:
    "<Macintosh HD>/Library/Fonts/MyriadWebPro-Italic.ttf"
    Is there a folder named MyriadWebPro-Italic inside the Fonts folder? Is the file MyriadWebPro-Italic.ttf already existing within this folder?
    In both the cases, delete this file/folder and try to install PSE again.
    Hope this helps. Let me know.
    Regards,
    Ankush

  • Windows 7 SP1 x32 bit fail to install Windows SP 1 with error code: 0x80070643/0x800F0829

    Hi All,
    I'm unable to install MS Service Pack 1 in Windows 7 Professional 32 bit, failing with error code: 0x80070643/0x800F0829.
    1. Remove Symantec Endpoint Protection.
    2. Run System Update Readiness Tool
    3. Install MS SP 1 and fails.
    Here is the log file.
    https://onedrive.live.com/redir?resid=7627981B9D84362B%211869
    Thanks,

    Hi,
    I suggest you download the full package, and try to install it in Clean boot Mode:
    Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
    http://www.microsoft.com/en-in/download/details.aspx?id=5842
    If the issue still persists, please try following command to repair Windows:
    SFC /scannow
    You can also try the In-place upgrade to clean your Windows and install the update again:
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    Kate Li
    TechNet Community Support

  • Error in push sccm client CcmSetup failed with error code 0x80070643 ccmsetup sccm 2012

    i want to push sccm client for all computer i enable automatic side-wide client installation 
     some computer get error code 0x80070643
    ccmsetup sccm 2012 this 
    when i tray manual installation get same error and ccmsetup.exe stopped 

    Duplicate of
    https://social.technet.microsoft.com/Forums/en-US/3bac4677-46b0-4d96-b63d-a819efcc7f35/error-in-push-sccm-client-ccmsetup-failed-with-error-code-0x80070643-ccmsetup-sccm-2012?forum=configmgrgeneral
    Please don't double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • CcmSetup failed with error code 0x80070643

    I`m running Windows 2012 r2 with SCCM 2012 R2.
    Installed SCCM without any problems, but now I try to install the client and that`s not working.
    Tried to install client from SCCM and tried to install cliënt manualy on the client device. Both fail.
    Operating systems: Windows 7 and 8
    Installing client on Windows 2008 server==>OK
    Errors in the ccmsetup.log on client:
    <![LOG[MSI: Action 15:59:04: Rollback. Rolling back action:]LOG]!><time="15:59:04.973-120" date="07-30-2014" component="ccmsetup" context="" type="0" thread="7280" file="msiutil.cpp:314">
    <![LOG[File C:\Windows\ccmsetup\MicrosoftPolicyPlatformSetup.msi installation failed. Error text: ExitCode: 1603
    Action:
    ErrorMessages:
    ]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="3" thread="7280" file="msiutil.cpp:876">
    <![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="3" thread="7280" file="ccmsetup.cpp:7202">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='311' will not be sent.]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="1" thread="7280"
    file="ccmsetup.cpp:9763">
    <![LOG['Configuration Manager Client Retry Task' is scheduled to run at 07/30/2014 08:59:13 PM (local) 07/30/2014 06:59:13 PM (UTC) time with arguments ' "/mp:cap-sccm01" "SMSSITECODE=CAP" /RetryWinTask:1'.]LOG]!><time="15:59:13.291-120"
    date="07-30-2014" component="ccmsetup" context="" type="1" thread="7144" file="wintask.cpp:315">
    <![LOG[Creating Windows Task Scheduler folder 'Microsoft\Configuration Manager'...]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="0" thread="7144" file="wintask.cpp:160">
    <![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:59:13.291-120" date="07-30-2014" component="ccmsetup" context="" type="1" thread="7144" file="ccmsetup.cpp:10879">
    Errors in ccm.log on server
    ---> Unable to connect to WMI (root\ccm) on remote machine "CAP-LT24", error = 0x8004100e. SMS_CLIENT_CONFIG_MANAGER 30-7-2014 15:47:56 6248 (0x1868)
    Execute query exec [sp_CP_SetLastErrorCode] 2097152008, 0 SMS_CLIENT_CONFIG_MANAGER 30-7-2014 15:47:57 6248 (0x1868)
    Additonal Info: On the client devices we had Windows ITunes. Uninstalled Windows ITunes, but no effect.
    Please advise

    Hi,
    How about MicrosoftPolicyPlatformSetup.msi.log ?
    There is a similar problem in the blog below. You could have a look.
    http://blogs.msdn.com/b/george_bethanis/archive/2013/02/04/cm12-upgrade-of-a-client-to-sp1-fails-with-error-microsoftpolicyplatformsetup-msi-installation-failed-exit-code-1603.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cloud Update Failure: Error Code A12E1

    I tried to update the Cloud app. I get this error.
    "We've encountered the following issues:
    Sorry, there seems to be a problem with the installation process (Error Code: A12E1). For troubleshooting tips, please visit our support page."
    So here I am. I have no idea what to do.
    Hardware Specs:
    Mac 10.8.4
    2.66GHz Intel Core i7
    8GB 1067MHz DDR3
    No external drives

    I ran into this issue recently myself when I was applying the lastest updates to CC:
    Error Code: A12E1)
    I thought the fix recommended - running the cleaner and/or reinstalling the entire Suite, etc - was a little bit extreme. I was able to apply the update in a round about manner. I didn't have time to do a complete reinstall just to fix a couple of photos.
    Issue: When applying the update to Creative Cloud you get the error about 3/4 of the way through the upgrade:
    "We've encountered the following issues:
    Sorry, there seems to be a problem with the installation process (Error Code: A12E1). For troubleshooting tips, please visit our support page."
    Tried again after a reboot. Same error.
    HERE IS MY FIX:
    I am Running Lion, and this is what worked for me:
    Resolution:
    1. Restarted the Mac, telling it NOT to open the programs on reboot
    2. Opened Photoshop
    3. Went to Help and selected updates...
    4. Launched the update through Photoshop. It ran through and updated the applications.
    After I was done, I noted the CC update indicator next to the clock went away. I also noted that when I launched Photoshop from Lightroom I didn't get the error saying my Adobe Raw was out of date which is what prompted the update in the beginning.
    I should note that when I did this I got an error saying some library was open so I canceled the upgrader and closed out of the program I forgot to close, so make sure this is a clean restart.

  • Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

    I get this error when installing VS 2015 Community RC.  I'm installing on Windows 10 build 10074.  I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
    I also get the other errors as well...
    Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
    Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

    Same issue here, on a Surface Pro 3.
    I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
    Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
    Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
    the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
    back at square one.
    Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
    Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
    Oh, and obviously - No, I did not cancel the install myself.
    Here are some relevant lines from the install log,
    [060C:0CF0][2015-04-30T14:20:08]i000: MUX:  Source confirmed
    [060C:1994][2015-04-30T14:20:14]i000: MUX:  Finished connecting secondary installer pipe
    [060C:14D4][2015-04-30T14:20:19]i000: MUX:  Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
    [060C:14D4][2015-04-30T14:20:25]i000: MUX:  Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
    [060C:044C][2015-04-30T14:28:13]i000: MUX:  ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
    [0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
    [0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
    [060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0  MaxSysDrive: 2063301632  AppDrive: 0  SysDrive: 2060471296
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  ExecutePackageComplete for secondary installer
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Disconnecting secondary installer pipe
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
    Action=Install, Package Id=VSSecondaryInstaller_box
    [060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
    [060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
    Think I'll go buy a Mac...

  • Known Issue: Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

    Some users are receiving the following errors after Visual Studio setup completes
    Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
    Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
    installation. Error code: -2147023294

    We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
    New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
    you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
    To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
    If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
    Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
    Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
    Update.
    Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
    Update.
    An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
    https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
    the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
    Thanks!
    -Paul

  • SQL Server Setup failure (Error code 0x858C001B)

    Hola..
    Vengo con un problema que me esta causando desesperacion, ya he buscado en los hilos y no puedo solucionar este problema.
    Resulta que descargue la version de SQL Server Express 2012 64 bits y al quere instalarlo me muestra el error:
    SQL Server Setup has encountered the following error:
    The SQL Server license agreement cannot be located for the selected edition, EXPRESS. This could be a result of corrupted media or the edition being unsupported by the media.
    Error code 0x858C001B
    Ya he buscado y no encuentro respuesta. 
    SQL Server Setup failure (Error code 0x858C001B)

    Hi,
    Can u have look at this Discussion
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. (Error code: 22)

    Trying to download creative cloud app and this message pops up. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. (Error code: 22)

    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

Maybe you are looking for

  • How to give no of lines per page in alv report

    hi could anybody tell me how to give no of lines per page in alv report i need bottom of page too if possible plz send the code too it ll be very helpful to me thanx kals.

  • DD/MM/YYYY format

    Hi i'm getting the following error for my procedure. Here both EFFECTIVE_DATE_DT and PERIOD_TO are in the format of DD/MM/YYYY. Please help me. ORA-00904: "JUL": invalid identifier ORA-06512: at "RTMAST.SPR_CONT_TEST", line 33 ORA-06512: at line 11 C

  • Insufficient Memory

    Hey! Our Editor is getting this error: "Insufficient Memory. Specify a smaller recording range, quit any unused application and install more system RAM." .. when trying to use the Voice Over Tool. She has a 2.5ghz G5 PowerMac, 4GB DDR SDRAM. We're ru

  • ORA-02068; ORA-03113 ::DB Link Problems

    Hi, I have created a DB Link from to our client database MARS & i have named it as "MARS_DATA". But my problem is whenever i query the data using 2 tables in it with a proper join condition using DB Link i am getting the following error. ORA-02068: f

  • Production State in SWCV SLD WAS 7.0

    Hello, We've just installed PI 7.0 with the new look and feel of the SLD and the Software catalog: SAP_CR, Version 2.9, 06/21/2006. New are the software units -> minor info is given in the documentation. And when creating SWCV in a drop down box the