Add role to user when added to room

Hi,
We currently have all the users from our LDAP server available in the portal. When our content manager creates a new room and adds members we also have to give the members a default role in order to logon. These seperate steps are necessary, because we don't want give access to all the LDAP users.
Does anyone know if there is a feature, by which we can give users a default role automatically, when adding them as room members?
Looking forward to your reply.
Kind regards,
Joost Christenhusz

Hi Joost,
This feature is not available out of the box. To achieve this functionality you can write your own room extension and make sure that this extension is used in the room template. In the extension you can assign the required portal role to the room members. The extension gets executed when the room is created and your room members will be assigned the appropriate portal role. Use this guide as a starting point for room extensions
https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/coll/Room%20Extension%20Developer%20Guide.html
Hope this helps.
Akhilesh

Similar Messages

How can I see more than 100 users when adding users to a node?

When adding new users through the User Management interface, only the
first 100 entries are listed. How do I increase the number of entries
so I can see the next hundred (or more) users? Is this done via the server
configuration parameter maxsearchresult?

The GUI Add User to Node option was meant for infrequent adds in smaller
environments. In large deployments (more than 100 user adds at a time), you
should be using the command line script "unidsattach". See the Administrators
Guide for more details on the command.

The parameter, maxsearchresult, is meant to limit the number of users that can
be returned on a search request by the calendar client. For example, if you have
1000's of calendar users and someone tries to search for all of them, this
parameter will make sure that the user is not left waiting a long time for
results.

In Settings > Notification Center, try turning "on" all the six buttons under "Today View". Also turn "on" the top two buttons under "Access on Lock Screen". Doing that should show you "Tomorrow" at the bottom of Noticiation Center.

Add role to user Rejected

the problem as follows ,
connector DBUM-11.1.1.6.0 used to provision user to oracle DB , i can create user on oracle db with no errors , but i notice that password is inccorrect when i use same password used when creating user under OIM , adding role to user for example ( Resource , connect ) rejected , i have checked logs and i found the follwoing error
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Aug 14, 2012 12:06:54 PM AST SERVER = oim_server1 MESSAGE = [ServletContext@411956704[app:oim module:xlWebApp path:/xlWebApp spec-version:2.5 version:11.1.1.3.0]] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/layouts/tjspClassicLayout.jsp' : Write failed: Broken pipe
at org.apache.struts.tiles.taglib.InsertTag$InsertHandler.doEndTag(InsertTag.java:902)
any one can help me figure out wht is the problem ?

i have checked logs again and found the following errors
from OIM resource page show the following error
Response: Operational attribute '__CURRENT_ATTRIBUTES__' can not be added or removed.
Response Description: Unknown response received
Error Details
Setting task status... "Operational attribute '__CURRENT_ATTRIBUTES__' can not be added or removed." does not correspond to a known Response Code. Using "UNKNOWN".
<BEA-000000> <Error: SIZE_LIMIT_EXCEEDED[LDAP: error code 4 - Sizelimit Exceeded]>
=================
<Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcLookupOperationsBean/getLookupValuesForColumnFilteredData encounter some problems: Lookup.DBUM.Oracle.Tablespacesis not a valid form field>
=================
<Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcLookupOperationsBean/getLookupValuesForColumnFilteredData encounter some problems: Lookup.DBUM.Oracle.Profilesis not a valid form field>
==================
<Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcLookupOperationsBean/getLookupValuesForColumnFilteredData encounter some problems: Lookup.DBUM.Oracle.Temp.Tablespaceis not a valid form field>
==================
<Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcLookupOperationsBean/getLookupValuesForColumnFilteredData encounter some problems: Lookup.DBUM.Oracle.Rolesis not a valid form field>
=================
<Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcLookupOperationsBean/getLookupValuesForColumnFilteredData encounter some problems: Lookup.DBUM.Oracle.WithAdminOptionis not a valid form field>
=================
<Error> <XELLERATE.APIS> <BEA-000000> <Class/Method: tcLookupOperationsBean/getLookupValuesForColumnFilteredData encounter some problems: Lookup.DBUM.Oracle.Privilegesis not a valid form field>
====================
<Aug 15, 2012 2:03:01 PM AST> <Error> <org.apache.struts.tiles.taglib.InsertTag> <BEA-000000> <Can't insert page '/layouts/tjspClassicLayout.jsp' : Write failed: Broken pipe
java.net.SocketException: Write failed: Broken pipe
at jrockit.net.SocketNativeIO.writeBytesPinned(Native Method)
at jrockit.net.SocketNativeIO.socketWrite(SocketNativeIO.java:46)
at java.net.SocketOutputStream.socketWrite0(SocketOutputStream.java)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:568)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:539)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:298)
at weblogic.servlet.internal.ChunkOutputWrapper.flush(ChunkOutputWrapper.java:188)
at weblogic.servlet.jsp.JspWriterImpl.flush(JspWriterImpl.java:99)
at org.apache.struts.tiles.taglib.InsertTag$InsertHandler.doEndTag(InsertTag.java:893)
at org.apache.struts.tiles.taglib.InsertTag.doEndTag(InsertTag.java:465)
at jsp_servlet._pages.__taskdetailspage._jsp__tag0(__taskdetailspage.java:111)
at jsp_servlet._pages.__taskdetailspage._jspService(__taskdetailspage.java:76)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
<Aug 15, 2012 2:03:01 PM AST> <Error> <HTTP> <BEA-101017> <[ServletContext@410340580[app:oim module:xlWebApp path:/xlWebApp spec-version:2.5 version:11.1.1.3.0]] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/layouts/tjspClassicLayout.jsp' : Write failed: Broken pipe
at org.apache.struts.tiles.taglib.InsertTag$InsertHandler.doEndTag(InsertTag.java:902)
at org.apache.struts.tiles.taglib.InsertTag.doEndTag(InsertTag.java:465)
at jsp_servlet._pages.__taskdetailspage._jsp__tag0(__taskdetailspage.java:111)
at jsp_servlet._pages.__taskdetailspage._jspService(__taskdetailspage.java:76)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
Truncated. see log file for complete stacktrace
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Aug 15, 2012 2:03:01 PM AST SERVER = oim_server1 MESSAGE = [ServletContext@410340580[app:oim module:xlWebApp path:/xlWebApp spec-version:2.5 version:11.1.1.3.0]] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/layouts/tjspClassicLayout.jsp' : Write failed: Broken pipe
at org.apache.struts.tiles.taglib.InsertTag$InsertHandler.doEndTag(InsertTag.java:902)
at org.apache.struts.tiles.taglib.InsertTag.doEndTag(InsertTag.java:465)
at jsp_servlet._pages.__taskdetailspage._jsp__tag0(__taskdetailspage.java:111)
at jsp_servlet._pages.__taskdetailspage._jspService(__taskdetailspage.java:76)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:417)

How can I ge user when I developing room extension

HI guys,
I am developing room extension, and want to add an ACL to my collection.
I get an "AccessDeniedException" error, when I try to create a new collection:
here is my code:
IResourceFactory resFactory = ResourceFactory.getInstance();
IResourceContext resContext = resFactory.getServiceContext();
userID = resContext.getUser();
String userName = userID.getDisplayName();
resource = (ICollection) resFactory.getResource(RID.getRID(structureRid),true,resContext);
try{userDirResource = resource.createCollection(userID.getId(),null);
catch(NotSupportedException e){}
catch(AccessDeniedException e){}
catch(ResourceException e){}
aclMan =((IAclSecurityManager) userDirResource.getRepositoryManager().getSecurityManager(userDirResource)).getAclManager();
userDirResourceAcl = aclMan.getAcl(userDirResource);
IResourceAclEntryList aclList = userDirResourceAcl.getEntries();
IResourceAclEntryListIterator i = aclList.iterator();
Can u give me some hint?
Thanks in advance!
Regards,
liying

Hi,
check user rights for user userID in folder RID.getRID(structureRid) - he should have at least WRITE permissions...
Alternative is to create the folder under service user which has all the needed permissions like cmadmin_service:
IResourceContext context = m_Factory.getServiceContext("cmadmin_service");
Romano

Error when adding SAP Room Calendar to Collaboration Room

Hello folks,
I tried to enhance my collaboration room by adding the Calendar room part to my collaboration room. However, I got the following error when I tried to display it after adding it to the room. Does anyone know where the problem lies or how I can access the log file to view the exception ID as it is mentioned in the error message?
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/b0682d32-e98d-2910-9bab-f7071dc4fab4/workset/b0682d32-e98d-2910-9bab-f7071dc4fab4_RoomPartInstance~101/com.sap.netweaver.coll.RoomCalendarPage/com.sap.netweaver.coll.RoomCalendar
Component Name : null
See the details for the exception ID in the log file
Page could not create the iView.
Thank you,
Katharina

Hi Katharina,
I would take a look under the node Server -> Log viewer... And then Cluster -> Server -> g:\usr\sap -> <instance name> -> j2ee\cluster\server0 -> log defaultTrace.trc
(or something similar to that....)
Kind regrads,
dominik

How to assign ROle to user

Hello All,
I need to programmatically assign roles to user and want to give some authorization at runtime..
please suggest me which function module to use ..
please help me asap
thanks,
jigs
helpful answers wil lbe rewarded

Hi all,
Thanks for the reply.
But i want to add one role to user not profile.
i got one bapi BAPI_USER_ACTGROUPS_ASSIGN, this bapi does work...
but actually deletes previous roles and then assign new one.
is there any fm which will add role to user without deleting existing role.
thanks,
jigs

Creation of HR master record For a user when a time entry role is added

Hi,
Description summary:Automating creation of HR master record For a user when a time entry role is added to a user account
Description detail:When time entry role is provisioned to a user account,the HR master record is linked,It is compleated after a user is created because a user id must exist .
It is part of the record.In addition the user must be hired into SAP in order for the HR Master Record to Appear in SAP.
What we need to do is when a 'Time and Personal Data Maintainer Role "is Added by the VIRSA_ADMIN user,automate the creation of the HR Master Record.
Transaction code :SU01 to add the role to the Account.
How to Create the User Exists For this RequestIts very urgent pls help me on this.
Thanks.
Vipin

Why do you need a User Exit? You can create a BDC on PA40 & kick it off upon adding the role..
~Suresh

Notification when user gets added or removed from room

Hello all,
I need to periodically synchronize the name of the room members with members of a group of a 3rd party application, i.e. each time a user gets added to a room i need to add the same user id to a special group in a 3rd party application (in my case a user group in the bug tracker application JIRA)
Does anyone know if and how i can get a notification e.g. within a KM service if someone is added to or removed from a group? I can imagine there exists an API how to get the members but this would require me to poll KM to get the room members and i'm pretty sure this won't work well with 10000 rooms
Best regards
Dieter

Hi,
For notification you need to configure "mail Transport"
Go to
System administation -> system configuration -> collaboration -> transport - > mail transport.
Here you maintain the SMTP server IP address.
then members will get notification about room.
Regards,
Ganesh

What is the difference between using the command "dsmgmt" and the "Managed By" tab when adding users to the local administrators Account on a Read-Only Domain Controller?

When I use the
"dsmgmt" command to add a user to the local administrators account of a RODC I can actually see the user when I use the "Show Role Administrators" parameter. However, I can't see the members of the
group added to the "Managed By" tab of the RODC object in AD. Even though, the users added using
"dsmgmt" and by the "Managed By" tab can all log in locally and have admin rights to the RODC. Are there any differences between these two ways of adding users to the local administrators account?

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Add Active Directory user to Admin Role

Hi All,
I am trying to figure out how to add a AD user to the Admin Role..
I am connected to AD and can see the user (myself), however, when I try to add myself to the admin role, it says user not found.
I go to Security Realms > myreals > Roles and Policies > Global Roles > Roles > Admin > View Role Condition.
I see that the Administrators Group is already added. Now I click "add Conditions" and select "User" from the Predicate List and type in the user " Doe' John".
On the next screen I get "user: John or Dow" does not exist.
Another option could be to add the user to the Administrator group, but I couldnt figure out how to do that as well. When I navigate to the user under Users or Groups, I dont see an option to add that user to the Administrator group.
Is it that you can only add users created in Weblogic to the Admin group?
Any help on this will be very appreciated.
Thanks in advance.

I think I got it. I had to add the AD group the user is part of to the Admin role.

Mail compose window jumps to back when adding address. As soon as I add a single character to the address window of a new mail message, it pops under all other existing windows. If I have others open...and who doesn't? I have to then close them all.

So.....deeply....disappointed by Lion...
It honestly gets in the way of getting things done.
When was the last time you had an upgrade, in any program or OS that caused an immediate productivity drop?
Mail windows, when adding a new address, pop under to become the lowest window in the stack...before you are done composing...
no extra clicks..just adding ONE character to the actual address bar does it.
Trying to add files to an online content management system is hard...it's hard because when you attempt to add the file, it disappears from
the list, so a search must be conducted...oh not a search of your hard drive...no...it has to include ALL FILES and that takes a while, showing
files totally unrelated to what you need or in whatever that view is, showing everything from movies to documents, to a whole range of other stuff
that is irrelevant to what is being sought.
I can get used to the disappearing icon tool bar...but the message threading in Mail is so strangely bad it's hard to describe. So you send out an email,
and it had 5 points...but that was 3 emails before...A reply comes in addressing those 5 points but saying something like ..."I disagree with point number 4"
Unless you have total recall the thread shows you only incoming mail and the LAST most recent folded up message you sent. You are forced to go digging
into sent mail to see what that point you made 8 days eariler actually was...
I am pleased that I don't have to have Launchpad (honestly the silliest 'feature' I've ever seen on a computer) in the dock and see no point in the juvenile Mission Control (the naming scheme is odd and reminiscent of Junior Spaceman...how ironic that we end America's manned launch capability at the same time as Launch Pad and Mission Control, both throwbacks to the 60's are added to an OS). In any case both are virtually useless tools. One, replacing the mildly useful Spaces and the other just genuinely useless.
I'm going to give Apple until the second bug fix...but I can tell right now that Snow Leopard was a far more robust OS. The thousands of posts about this may rise to the level of AntennaGate...I hope so...It seems the only way to get Steve (for whom I have now honestly lost respect for the FIRST TIME) to address the issues is to embarrass the company publicly. Lion is a broken system, poorly conceived...and proof that the Apple methodology of no widespread user testing can and does fail. This needs to get fixed. Soon.

It seems to have something to do with profile manager.
I get stack traces in the "system messages" logs for the "Server" application, grrrr.
I'll get that info and attempt to submit a but report tonight.

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

In-app purchase: Error message when adding a test storekit user

Hi, I'm running into the "The email address you entered already belongs to an existing Apple account. Please try again." when I try to add a test user for in-app purchases. I used an email associated with an existing Apple-id.
I'm running into "Could not convert Apple ID account to iTunes store account." when trying to add a test user with an email-id that doesn't have an Apple-id with it.
I have enabled "in app" purchases and added an in-app-purchasable product id using itunesconnect.
Using the programmer-portal, I've also configured the app-id of the app to enable store kit in-app purchases
I'm assuming that I need to signin with the test-user account for the code to receive the storekit productsRequest:disReceiveResponse callback. However, I haven't been able to create the test user
Does anyone know why both scenarios (described on top) are resulting in an error message ?

If I try to login from Settings->Store, it asks for my credit info which I'm sure is not necessary.
Apple had this to say about that on 8.28.09:
"Setting up Test Accounts for Testing In App Purchase
Before testing In App Purchase in your application, you need to create an In App Test User in iTunes Connect—you should not use other accounts as doing so will result in prompts to enter your credit card number and other information.
Here is how to properly set up your test user for testing In App Purchase..."
Please read all the latest info at the link and good luck w/your app.

Xserver OS X 10.4 server freezes when adding user

I have a 104 server that when I add a user it causes the server to hang and the only way to get control of the server back is to power the server off and back on. It seems to be caused by adding the administrative functionality to the user, when using work group manager.
when you click on the check box to give the user admin functionality you immediately get the following error:
Error of ty eDSAuthFailed on line 3379 of /SourceCache/ServerMangerUserGeneral/ServerMangerUserGeneral 193.4.1/UserAdvancedPluginView
Has anyone seen this before or know of fix for this issue?

Hi drdee, and a warm welcome to the forums!
It's quite acceptable to start a new topic of your own, feel free to start a new topic to attract more helpers to your particular situation, as not many helpers look at Solved/Answered Topics for people needing help, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=758
Try holding the Mouse button down while powering up, that should oped the CD/DVD tray or eject anything in it.
Try starting a new topic, maybe we can get it going!

Error when trying to give permissions to users and adding them to the site

Hi,
i'm facing an issue with a public website (SharePoint server 2010) where i can't add any users (windows users) or grant permission for them.
I checked the Authentication Provider for the web application and Windows Authentication NTLM is enabled, the IIS also enable windows authentication for that site.
the issue happens when i go to Site Action --> Site Permission --> Grant Permissions --> I select users after searching for them and once i click OK Exception is appearing.
I check the logs and all i found is:
10/12/2014 12:16:15.84 w3wp.exe (0x07C8) 0x0AA0 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace level override to 0; resetting correlation to a17a120f-ebf7-4de7-aeb4-91c0ae7be28e d07aff74-632e-4bfe-93d0-415b93f53f6a a17a120f-ebf7-4de7-aeb4-91c0ae7be28e
Note that this happen all of sudden, i was able to add users / groups, users to groups, grant permissions directly but no i can't do none
My website is grating permissions also for Anonymous users and it's working fine
This is production server site so i can't try lots of options unless i'm sure of them
Event viewer is not capturing any error
Please help

This could be browser issue, please try adding site in trusted site in browser or try to some other browser like Chrome/Mozilla.
I have faced this issue when I try to access site from server in IE, it get failed on "OK" when adding user.
I hope this I will help you
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Add role to user when added to room

Similar Messages

Maybe you are looking for