Add second Exposure Adjustment

Hey there,
I was wondering if you could somehow add a second 'Exposure' Adjustment as you can add multiple times for example curves or so.
Thanks.

Hi Nikolas.
Nope . Exposure Brick adjustments, per Image, are global and singular. Once you set them (I recommend setting them so that they give you not the _the exact_ final results you want, but rather the latitude to make other adjustments that give you the final result you want), you use other adjustments to further refine the "exposure".
See this page in the User Manual. (Added: Actually, that page isn't as helpful as I had expected. Use "Exposure" to give you the broadest range of usable data. Then use either Curves or Levels to re-map that data where you want it for the whole Image. Then use Quick Brushes and/or additional brushed-on Curves or Levels adjustments to re-map local subsets of your global data. At least, that what I do .)
HTH,
--Kirby.
Message was edited by: Kirby Krieger

Similar Messages

Lack of Sharpness in 1 Second Exposures

I bought a T4i about a year ago after ten years or so of using point and shoot cameras. Prior to that I used Canon SLR's for 30 years and was an avid nature photographer. I planned to use this camera to take scenic photos while fly fishing and was particularly interested in having the ability to take long exposures of rivers and waterfalls. I have been disappointed in the sharpness of many of my photos, but with some calls to tech support at Canon, have seen some improved results.
However, I have recently played around with long exposures while fishing and observed that even with my rock solid Gitzo tripod, one second exposures are not at all sharp. I sent images to Canon tech support and they agree that the sharpness should be there, so I have sent the camera and 18-135mm lens off to the repair center. I am curious to learn if anyone else has faced this problem. I used to take long exposures with my AE-1 and the sharpness was superb. I have attached two shots that I sent to Canon. Both were taken at 40mm at a distance of about 30 ft. The first is a 1 sec exposure at f/29 and the second 1/60 sec at F/5.6. Based on the recommendations of tech support, I enabled long exposure noise reduction, turned off auto stabilization, locked the mirror up, and used a 2 sec delay to avoid camera shake. I did crop the pictures for the post to zoom in on the writing. Please let me know if you have any thoughts. Thanks.

I think you may find this helpful in explaining the issue.
http://www.luminous-landscape.com/tutorials/understanding-series/u-diffraction.shtml
Edited to add
I also think having long exposure noise reduction ON may be another contributing factor. 1 second isn't really "long".
"A skill is developed through constant practice with a passion to improve, not bought."

How do I Add second monitor to ALL in One ENVY23 that has a HDMI port

How do I Add second monitor to my ALL in One ENVY23 that has a HDMI port the computer has Win 8 Model #: 23se-d494
Product #: F3D93AA#ABA
Serial #: [edited Serial Number by Moderator]
Software Build #: 14AM1HRA601#SABA#DABA
Service ID #: 20140521
PCBRAND #: HP

Here are the specs for your HP ENVY TouchSmart 23se-d494 All-in-One Desktop Computer. Based the specs, the HDMI port on the side of your computer is an INPUT only. This model doesn't have a video output of any kind.
1 - Controls 2 - HDMI In port (model dependent)
You will need to purchase and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Payment program F110 - how to add second print program in customizing

Hello all,
i would like to add second (another print program after standard sapscript print program customized in table T042Z) print program in transaction F110. This second smartform print program should be customizable and triggered automatically within payment run.
Thanks, zd.

Hi,
You can assign two forms in FBZP.
Payment methods per company code
Double click on payment method
In Form Data
You can assign Next Form
Both the forms should get printed when you run F110.
Thanks,
Ravi

Apple please rework the auto exposure adjustment

90% of the time, the result is worse than before. It seems, Aperture's auto exposure adjustment is based on an average of the whole picture. So in its effort to get a well distributed histogram over the whole range, it happily blows the brighter parts of the picture.
I usually try to recover most of the highlights except small reflections etc. and then lighten up shadows and mid-tones with the appropriate tools to get a well exposed picture.
So I would prefer, that the auto exposure adjustment would be more sensitive towards blown highlights especially larger contiguous areas of highlights.
If you can't find an algorithm that works reliable, probably give me two separate auto exposure adjustment buttons. One adjusts to overall good exposure, like it is currently, the other tries to prevent blown highlights.
An even more advanced auto exposure adjustment would be, to combine the current exposure adjustment with some shadow and mid-tones adjustment, in case the exposure adjustment with preserving highlights led to an underexposed image.
I don't expect this to give perfect results, but it would be a real timesaver to use it as a starting point for manual fine tuning.
Not to bash Aperture but to encourage you to improve it: ACR's auto exposure mechanism is doing a much better job than Aperture's current one.
Peter
Quad G5 Mac OS X (10.4.8) GT 7800

Well, obviously all your photos are already exposed perfectly!
(Seriously: when you say "nothing happens", do you mean absolutely nothing? Does the "Exposure" panel's check-box become checked after you hit the Auto button? If so, then it made SOME adjustment (though perhaps not enough for you to notice, see initial comment!) If not, then yeah, something is not working right for you.

Add second NIC

Hi Everybody, i have a query, how to add second NIC to my Virtual Machine in Windows Azure? I´m looking for this option, but only there are disk and image options in VM.
Many Thanks
Edgar

Please vote if you have not already:
http://feedback.azure.com/forums/217313-networking-dns-traffic-manager-vpn-vnet/suggestions/3144627-multiple-network-interface-cards-on-vm

Add second account to lifelog, Google Fit integration.

It is possible to add second account to Livelog?Or maybe synchronize data between Sony mobile account and Google account. Reason: I am very interested in new google Fit application and I think that it can work with data from google account but not with data from Sony account. I already switched from Sony account to google but I lost older data stored in sony account.

I am also very interested in integration with Google Fit. Reason: Both Fit and Lifelog try to quantify my total calories spent. Fit misses out on lots of walking/running, because I don't always carry the phone on me. Lifelog misses out on other activities, e.g. strength training, which I add manually in Fit. Also, Lifelog does not have accurate weight registration nor weight history. I would love to use only Lifelog, but for now, it does not offer everything that Fit does. Waiting for updates!

Add second item into PayPal express checkout list

I want to add second item into PayPal express checkout list public void initPayPal() throws SSLConfigurationException, InvalidCredentialException, IOException, HttpErrorException, InvalidResponseDataException, ClientActionRequiredException, MissingCredentialException, InterruptedException, OAuthException, ParserConfigurationException, com.paypal.exception.SSLConfigurationException, com.paypal.exception.InvalidCredentialException, com.paypal.exception.HttpErrorException, com.paypal.exception.InvalidResponseDataException, com.paypal.exception.ClientActionRequiredException, com.paypal.exception.MissingCredentialException, com.paypal.sdk.exceptions.OAuthException, org.xml.sax.SAXException
PaymentDetailsType paymentDetails = new PaymentDetailsType();
paymentDetails.setPaymentAction(PaymentActionCodeType.SALE);
PaymentDetailsItemType item = new PaymentDetailsItemType();
BasicAmountType amt = new BasicAmountType();
amt.setCurrencyID(CurrencyCodeType.fromValue("USD"));
double itemAmount = 1.00;
amt.setValue(String.valueOf(itemAmount));
int itemQuantity = 1;
item.setQuantity(itemQuantity);
item.setName("item");
item.setAmount(amt);
List<PaymentDetailsItemType> lineItems = new ArrayList<PaymentDetailsItemType>();
lineItems.add(item);
paymentDetails.setPaymentDetailsItem(lineItems);
BasicAmountType orderTotal = new BasicAmountType();
orderTotal.setCurrencyID(CurrencyCodeType.fromValue("USD"));
orderTotal.setValue(String.valueOf(itemAmount * itemQuantity));
paymentDetails.setOrderTotal(orderTotal);
List<PaymentDetailsType> paymentDetailsList = new ArrayList<PaymentDetailsType>();
paymentDetailsList.add(paymentDetails);
SetExpressCheckoutRequestDetailsType setExpressCheckoutRequestDetails = new SetExpressCheckoutRequestDetailsType();
setExpressCheckoutRequestDetails.
setExpressCheckoutRequestDetails.setReturnURL("http://devtools-paypal.com/guide/expresscheckout/java?success=true");
setExpressCheckoutRequestDetails.setCancelURL("http://devtools-paypal.com/guide/expresscheckout/java?cancel=true");
setExpressCheckoutRequestDetails.setPaymentDetails(paymentDetailsList);
SetExpressCheckoutRequestType setExpressCheckoutRequest = new SetExpressCheckoutRequestType(setExpressCheckoutRequestDetails);
setExpressCheckoutRequest.setVersion("104.0");
SetExpressCheckoutReq setExpressCheckoutReq = new SetExpressCheckoutReq();
setExpressCheckoutReq.setSetExpressCheckoutRequest(setExpressCheckoutRequest);
Map<String, String> sdkConfig = new HashMap<String, String>();
sdkConfig.put("mode", "sandbox");
sdkConfig.put("acct1.UserName", "peter.penzov_api1.gmail.com");
sdkConfig.put("acct1.Password", "5LQB5QHQJVKP9QKN");
sdkConfig.put("acct1.Signature", "AFcWxV21C7fd0v3bYYYRCpSSRl31A6JqBNQNOE3.Jwxfs7nIV1jR7qcl");
PayPalAPIInterfaceServiceService service = new PayPalAPIInterfaceServiceService(sdkConfig);
SetExpressCheckoutResponseType setExpressCheckoutResponse = service.setExpressCheckout(setExpressCheckoutReq);
String token = setExpressCheckoutResponse.getToken();
String link = "https://www.sandbox.paypal.com/cgi-bin/webscr?cmd=_express-checkout&token=" + token;
ExternalContext externalContext = FacesContext.getCurrentInstance().getExternalContext();
externalContext.redirect(link);
}

Help please?

Cannot add Second Exchange Account to Outlook 2013

Cannot add second exchange account to same profile on Outlook 2013. I went through control panel, mail and tried to add the second exchange account there but I keep getting rundll32 has stopped working error. Using Windows 8.1. Any suggestions on what
I should do?

Hi,
I have some suggestions to troubleshoot this problem.
Run Windows on Clean Boot mode. Here is the link.
http://support.microsoft.com/kb/929135
Reinstall Office
Following are the steps for configuring multiple-account in Outlook.
Click File in Outlook then click Account Settings.
Choose E-mail Accounts.
Click New and input your Second Exchange Account information, then click
Next.
If the issue persists, please post your issue in Outlook forum. Here is the link.
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
Thanks.

Exposure adjustment layer for 32 bit HDR images

I know I can adjust exposure in Camera Raw. I can use the adjustment brush to make local exposure adjustments in ACR too. Is it possible to make exposure adjustments to 32 bit images in Photoshop? My attempts at using the exposure adjustment layer weren't successful. Although I'm told "exposure" was designed for 32bit, the adjustment layer doesn't seem to be to access and manipulate any of the exposure data thats I know is in the file, but is not visible. It would be should be so useful, but from what I gather the exposure adjustment is totally useless for 32 bit images. Are I doing something wrong?

Thanks for the reply. I'm struggling to explain so i'll try and illustrate instead. Basically the Exposure adjustment layer does not work on the 32 bit file in the same way that ACR does. ACR changes exposure in the predictable way it should (like a raw file). The Exposure adjustment layer in photoshop doesn't work the same way. Or at all?

TS4268 i cant add second email on face time

hello,
i can't add second email adress on face time on my iphone 5s and on my apple mc book,and ipad

Hi bogdan1974,
Thanks for using Apple Support Communities. This article explains how to view the list of addresses useable by FaceTime:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
Settings > FaceTime > You can be reached by FaceTime at:
On OS X, find out which addresses are enabled:
In Messages, choose Messages > Preferences > Accounts. Select iMessage in the left column. Your contact preferences should appear under "You can be reached for messages at:."
In FaceTime, choose FaceTime > Preferences. Your contact preferences should appear under "You can be reached for calls at:."
If you're unable to add an email address for use from there, please reply and let me know any error messages you are receiving or at what step exactly you are unable to continue.
Cheers,
- Ari

Is there provision to add second internal Hard disk to 17-e117dx

Hi,
Please can you let me know, if there is provision to add second internal hard disk to HP Pavilion 17-e117dx.
If yes, a) are there any requirments or the specifications of Hard disk (any make or model); b) what other hardware will be required and where I can get it from and c) lastly will doing so make my HP laptop warranty void
HP Pavilion
Product: F9J38UA#ABA
Model: 17-e117dx
Thanks
This question was solved.
View Solution.

Not in the way you probably envision. Here is the Service Manual:
Manual
See Page 50. Unlike the Envy 17 and Pavilion dv7, the Pavilion 17 has only one hard drive bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD bay hard drive adapter. The Manual shows how to remove the DVD drive and you can buy the adapter at amazon.com or from jacobsparts.com. Note it is a 9.5 mm thick drive, not a 12.7 mm. Both types are available. I do not recommend the DVD drive adapter solution because you lose the use of the optical drive and also because the optical drive interface is usually not as fast as the main hard drive interface. Still fast enough for simple storage and you can run a video from it but you would not want to edit video from that drive, for example.
https://www.jacobsparts.com/items/HDDBAY-02/
If you do decide to go the DVD adapter route I would buy a large capacity 5400 rpm SATA 2.5 inch wide and 9.5 mm thick hard drive. No sense in buying a more expensive high performance drive.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822178006
If this is "the Answer" please click "Accept as Solution" to help others find it.

How to manually add second detail on master detail page

Hi,
Apex 4.1
can anyone tell me which steps to take excactly to manually create a second detail region on a master-detail form ?
So far I've copied the first detail region and customized it to the second detail table. Copied the processes and adjusted them.
What happends now is whenever I push one of the 2 "add row" buttons the rows are always added to the last region shown on the page. (also if I try to change anything on the data on the form and submit it all kind of errors show up )
It seems like the javascript:addrows() does not work for the region it's defined in, but how to adjust this ??
If I'm forgetting any other steps please also let me know.
Found multiple threads on this but so far no explanation on how to manually do this.
Cheers
Bas

Bas,
Multiple tabular forms or detail regions on a master-detail form are not yet supported. So you best option would be to make one or both of the detail regions read-only report regions with edit links on each row, which would take you to a detail edit page. Alternatively you could try to manually build two tabular form regions on your page, however you will not be able to use any of the built-in tabular form features then, incl the add-row functionality, the multi-row update processes and declarative validations. So all of this would need to be hand-coded in PL/SQL and JavaScript. We have plans to support multiple tabular form regions out of the box, but we don't yet when this might make it into APEX.
Regards,
Marc

Problem with exposure adjustment in Camera Raw

I'm a long time Photoshop user, currently on CS6. Recently I've been having problems with adjusting exposure in Camera Raw. For some reason, it now only works in full stops. Nothing in between works. Same problem with the adjustment brush.
I updated today to the latest version but the problem remains. All other adjustments are working as they should.
Can anyone explain what happened and how I can get back full funcionality?

I have found an acceptable solution to the issue (already posted in this thread: http://forums.adobe.com/message/5920583#5920583 ) after invaluable tips from forum members.
The problems are indeed caused by the Nik plug-ins, and specifically by the Selective Tool plug-in. But you don't need to uninstall anything.
Solution: In your applications folder, choose Photoshop/Plug-ins/Google and you will find the various Nik plug-in folders. Add a tilde sign to the Selective Tool folder (like this: ~Selective Tool). Close Photoshop and open it again. Camera Raw should now be working without issues. The Nik plug-ins will lose some funcionality, but nothing really serious. You will have to manually duplicate a layer before using a Nik filter and the filters won't work with multi-layers. If you desperately need full funcionality, close PS, remove the tilde sign and open PS again.

Add equal exposure boost across whole shoot in Lightroom

This is a Lightroom 4 question.
It seems that even with a calibrated screen and across multiple print labs and colour profiles, my prints will always come out about a third stop darker than what looked good on the screen. I attribute this to the screen emitting light vs. the page only reflecting it. My question: is there an efficient way to give an equal exposure boost across an entire shoot? I don't want to sync a specific exposure setting. I want to make virtual copies for print and then add maybe 0.3 exposure to all files, on top of their current setting.
The only way I can think do to it now is to export 16-bit tiffs which will reset the exposure to 0.00 for those files, and then sync them all at +0.3 exposure. This is really inefficient for time and hard drive space.
Am I missing something obvious? Even a preset will only set a specific overall exposure setting. I want a preset that adds exposure to the existing number.
Thanks,
James

James O\'Neill wrote:
Am I missing something obvious? Even a preset will only set a specific overall exposure setting. I want a preset that adds exposure to the existing number.
Quick Develop in Library can adjust images using a "relative" adjustment vs an absolute adjustment of a preset.

Add second Exposure Adjustment

Similar Messages

Maybe you are looking for