Add the configuration data to service contract Item

Hi Experts,
I have to assign the configuration character stics to the service contract (va43)
if we click the service contract Item ->extras->Configuration
there I need to add the characterstics.
Could any one suggest me if any function module is available for that.
Thnx,
Jaya.

What config data do you need... u need to be more specific and explanatory.. to get an answer

Similar Messages

Service contract ITEM extractor

Hello,
I found the following extractors:
0CRM_SRV_CONTRACT_H: CRM Service - Contract Header Data
0CRM_SALES_CONTR_I: Sales Contract Item
The first one gives the SERVICE contract header data, whereas the second one gives the SALES contract item data.
Now, I'm a little bit confused: Should there not be a Service contract item data extractor and a Sales contract header extractor as well?
Are the service and sales contract in fact the same techincally?
Regards,
Rikard

HI Rikard,
the datasource 0CRM_SALES_CONTR_I also provices Service Contract items , you can check the standard DSO
0CRM_CNT1 - Service Contracts (Item Data) which gets data from 0CRM_SALES_CONTR_I ,
Note that 0CRM_CNT2 - Sales Contracts (Quantity and Value) also gets the data from the same datasource
You check the ABAP logic in the start rotuine for both DSO s to understand how the data is differentiated using the
Object type
But there is no seperate datasource for Sales Contract header
Regards,
Sathya

Can Verizon add the pay date to the e-mail that is sent for billing reminder.

Can Verizon add the pay date to the e-mail that is sent for billing reminder.
Then you would have to sign on to look that up.
Your current bill
for your account ending in 4609-00001 is now available online in My Verizon
Total Balance Due:
$261.11
Keep in mind that
payments and/or adjustments made to your account after your bill was
generated will not be reflected in the amount shown above.

The email is quite direct. Log on to my verizon at www.verizonwireless.com and on the front page it tells you your due date.
as a rule unless you requested paperless billing, you will get a paper invoice in the mail as well.
it is due before or on your account closing date. My service runs from the 5th. of the month until the 4th. of the next month so the bill must be paid on the 4th. at the latest. (if paying on line)
if you pay by check you have to mail it at least five days in order for it to reach the payment processing center, or you can pay at any verizon wireless corporate store via check, credit card or bank debit card.

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

Regarding changing of configuration data of Sales Order/item

Hi,
I have taken configuration data of sales order/item from VC_I_GET_CONFIGURATION function module, i should change some of the data and save them back,
Can any one provide the function module name to save the configuration data in SAP sytem,
Thanks in advance,
With regards,
P.Prasanth.

Try with Function module
CE_C_PROCESSING.also you can use
CE_I_SET_CONFIGURATION
CUCB_CHANGE_CONFIGURATION
CUD0_CONFIGURATION_TO_DB

Warranty as Service Contract Item.

Hi,
in help.sap.com I've read the following sentence related to "Service Contract Items":
"element of the service contract in which you define the services or products you are providing the customer with under the terms of the service contract. A service contract item can be any of the following:
    * Service (for example, a particular task)
    * Material (for example, a spare part)
    * Time (for example, an hourly rate for a technicianu2019s time on the job)
    * Response time (how soon you are obligated to respond to a problem call)
    * Warranty (the agreed duration and coverage)
So I would be interested in using Warranty as a service contract item, but i don't know how to proceed.
Thanks in advance,
Luis.

Does anybody know the answer or should I close this message?

How to get the Delivery date in PO line Item in SAPScript

Hi Gurus,
I am working on PO Script (MEDRUCK). I copied the Standard to a Z form. ZMM_MEDRUCK, Now I need to print the the Header text at the end of MAIN window. I put Iem number along with the other line Item informmation like stanadrd PO Script MEDRUCK. I also want to show the delivey date with line Item, so Itried to use EKET-EINDT but it is returning the delivery date of last line item, means while printing the first line and other information it is showing the delivery date of the last line item, I tried with the PEKPO-EINDT it is also not working.
Can any body suggest me how i can get the delivery date for the respective line Item ?
Regards
Sony

actually your are picking up the correct data from Table EKET (EKET-EINDT) but your are printing that in item data loop for EKET might have already executed in your script and the header of that internal table consist the last entry of the table so for that. Fetch the delivery date explicite from the Table EKET when your in item level processing and print that.
For Example u can use this code.
To print you have write the this code in Script item level printing window "MAIN" window
Following perform is called to get the line item delivery date in PO
{/: PERFORM GET_DEL_DATE IN PROGRAM ZPerform_prog
/: USING &EKPO-EBELN&
/: USING &EKPO-EBELP&
/: CHANGING &DEL_DATE&
/: ENDPERFORM}
{* Dellivery date &DEL_DATE& }
write the below code in the Z program "ZPerform_prog"
{ FORM get_del_date TABLES in_par STRUCTURE itcsy
                         out_par STRUCTURE itcsy.
READ TABLE in_par WITH KEY 'EKPO-EBELN'.
CHECK sy-subrc = 0.
$_po_no = in_par-value.
READ TABLE in_par WITH KEY 'EKPO-EBELP'.
CHECK sy-subrc = 0.
$_po_line = in_par-value.
SELECT *
FROM eket UP TO 1 ROWS WHERE ebeln EQ $_po_no AND ebelp EQ $_po_line.
    $_del_date = eket-eindt.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal            = eket-eindt
      IMPORTING
        date_external            = $_del_date
      EXCEPTIONS
        date_internal_is_invalid = 1
        OTHERS                   = 2.
    READ TABLE out_par WITH KEY 'DEL_DATE'.
    CHECK sy-subrc EQ 0.
    out_par-value = $_del_date.
    MODIFY out_par
                INDEX sy-tabix.
    CLEAR : $_po_no , $_po_line ,$_del_date.
ENDSELECT.
ENDFORM.                    "GET_DEL_DATE }

Changing the Modified Date of a List Item using the SharePoint Client Object Model (C#) with Contribute Permission

I have a small snippet of code that I use to update the Modified Date of a list item and it works great for users with Full Control permissions. However, for users with just Contribute access to the site the code doesn't work. Instead, SharePoint
just updates the Modified Date to now.
I did some testing, and narrowed down the specific permission level that allows updating of Modified dates and oddly enough, it's the "Manage Permissions" level.
Has anyone run into this issue? If so, how do I work around this and update the Modified date as a user with only Contribute access to a site/library?
Here's the code:
DateTime Test = new DateTime(2012, 5, 4);
ListItem li = list.GetItemById(itemID);
li["Modified"] = Test;
li.Update();
ct.ExecuteQuery();
Thanks,
Max

Hello,
As a workaround you can pass admin credential in your code because as per my knowledge contributor can't update default columns like: created by, modified by, modified, created.
ClientContext clientContext = newClientContext(siteUrl);
ClientContext.Credentials = newNetworkCredential(UserName, Password, Domain);
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Java 1.4.2_03 Windows: The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

Java 1.4.2_03 WindowsXP The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

How do I add the capture date and time to the bottom corner of a photo?

How do I add the capture date and time to the bottom corner of a photo?

Not to the bottom, that I'm aware of, but to the top right or left in Grid view or to the top left in Loupe view. It is in the View Options.

How do I get numbers to automatically add the next date down a column in numbers?

How do I get numbers to automatically add the next date down a column in numbers?

Hi Dd,
If you want the next date automaitcally filled in when you add a row to the bottom of the table, you can use a formula.
Here's an example, done in Numbers 2.3 (Numbers '09). The method is basically the same in Numbers 3.
Formulas in row 3:
B3: =B2+1
C3: =C2+7
D3: =D2+14
These have been filled down to the last row of the table.
The same table is shown below after three rows have been added by dragging the Row control handle (below the tab for row 7) down. No changes other than adding thse three rows were made by the user.
Note that rows 1 and 2 are header rows, and that row 2 contains the starting date for the seraies of date in each column. In the formula, the number at the end tells Numbers how many days to add to the previous date to get the next date.
Autofill of the formula requires that every non-header cell located above the cell into which the formula is to be filled contains the same formula.
Regards,
Barry

Inbound IDOC for sales orders not posting the configuration data

Hi all,
I am facing a problem in posting the inbound IDOC (message type ORDERS). The configuration data maintained in the parent segment E1CUCFG and in the segment E1CUVAL is not getting posted though i am passing the data in these segments which is 100% correct.
Can any one solve this problem

Hi Ravi,
Please check the two segments are active. You can do that in BD53.
In BD53 enter message type, and make the segments active.
If segments are active, it appears in white colour.
After this post the IDoc and check with segments.
If its useful, award points pls..
Regards,
Bharadwaj

I need to Add the configuration file '.airinstall.cfg' to the air bundled runtime installer directory. where do i get the airinstall.cfg from

i need to Add the configuration file '.airinstall.cfg' to the air bundled runtime installer directory. where do i get the airinstall.cfg from what are the contents of the .airinstall.cfg file please help.

http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Add the configuration data to service contract Item

Similar Messages

Maybe you are looking for