Add: User Status field as a selection in IW28/29 "Display Notification"

Hello,
Is there a way to add the "User Status" field into the IW28/29 "Display Notification" selection of notification menu.
THanks.

Hello,
Please try this way:
you can use  fields Status included / Status excluded in the sub screen General Data/Administrative Data. Here you can include user status in the search help and then use this field to enter user status as selection criteria.
On the search help you use in your system it is also possible to change from the system
status entries to the user status entries with the help of a button "restrict values shift+F5" on your search help entries-screen.
Furthermore it is possible to change the lay-out of your search help-screen for this transaction. So that two tabs appear when you ask for search help. One tab is about the system status and one tab is for the user status.
To achive this, proceed as followed:
Go to the field on which you want to select the search help. Activate the search help on this field (press F4). The search help entries will appear in your system. Press CTRL+F4 in the search help entry list.
A pop-up screen will appear, go to the tab "settings current F4 help" mark the option under 'Dialog box'.
Now when you select the search help again, you will see that there are two tabs (system and user status) from which you can choose your status.
I hope the information is helpful.
Regards,
Jane

Similar Messages

  • How to Add a new fields in the selection screen of LDB.

    Hi All,
    I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
    So could you please tell me for that where i need to add the code for selecting the data.
    Thanks
    Roli

    Hi
    welcome to SDN forum
    If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
    if you wants to modify the std LDB of SAp means take the access key and to modify that code
    if you add the extra field you have to modify the where conditions in the code also
    see the doc
    A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
    LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
    Less coding s required to retrieve data compared to normal internel tables.
    Tables used LDB are in hierarchial structure.
    Mainly we used LDBs in HR Abap Programming.
    Where all tables are highly inter related so LDBs can optimize the performance there.
    Check this Document. All abt LDB's
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
    GO THROUGH LINKS -
    http://www.sap-basis-abap.com/saptab.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Re: **LDB**
    www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
    www.sap-img.com/abap/abap-interview-question.htm
    www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
    Gothru the blog which provides info on LDB's:
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Sample code
    TABLES: SPFLI,
    SFLIGHT,
    SBOOK,
    SCARR.
    START-OF-SELECTION.
    GET SPFLI.
    WRITE:/ ’SPFLI: ’, SPFLI-CARRID, SPFLI-CONNID,
    SPFLI-AIRPFROM, SPFLI-AIRPTO.
    GET SFLIGHT.
    WRITE:/ ’ SFLIGHT: ’, SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
    GET SBOOK.
    WRITE:/ ’ SBOOK: ’, SBOOK-CARRID, SBOOK-CONNID,
    SBOOK-FLDATE, SBOOK-BOOKID.
    GET SFLIGHT LATE.
    WRITE:/ ’ GET SFLIGHT LATE: ’, SFLIGHT-FLDATE.
    Regards
    anji

  • Table for user status field in CJ20n transaction project defination

    HI ALL,
    what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
    Thanks.

    Hi,
    Check following tables for Usre status:
    TJ30 - User status
    TJ30T - Texts for user status
    TJ20 - Status profile
    JEST - Object status
    JSTO- WBS status profile.
    Check this code:
    REPORT zps_get_userstatus .
    PARAMETERS: p_posid LIKE prps-posid.
    *-- Constants
    CONSTANTS: gc_yes(1)     TYPE c                 VALUE 'X',
               gc_no(1)      TYPE c                 VALUE ' '.
    *-- Variables
    DATA: l_objnr LIKE prps-objnr.
    *-- Internal tables
    DATA: BEGIN OF lit_jest OCCURS 0,
           objnr LIKE jest-objnr,
           stat  LIKE jest-stat,
         END OF lit_jest.
    DATA: BEGIN OF lit_jsto OCCURS 0,
           objnr LIKE jsto-objnr,
           stsma LIKE jsto-stsma,
          END OF lit_jsto.
    DATA: BEGIN OF lit_status OCCURS 0,       "Combination of JEST & JSTO
              objnr LIKE jest-objnr,
              stsma LIKE jsto-stsma,
              stat  LIKE jest-stat,
            END OF lit_status.
    DATA: BEGIN OF lit_usrsta OCCURS 0,       "Uer status for all wbs
             objnr LIKE jest-objnr,
             stsma LIKE jsto-stsma,
             stat  LIKE tj30t-estat,
             txt04 LIKE tj30t-txt04,
           END OF lit_usrsta.
    DATA: BEGIN OF lit_usrtxt OCCURS 0,       "User Status text - TJ30T
            stsma LIKE tj30t-stsma,
            stat  LIKE tj30t-estat,
            txt04 LIKE tj30t-txt04,
          END OF lit_usrtxt.
    * get WBS object number
    SELECT SINGLE
         objnr FROM prps
               INTO l_objnr
               WHERE posid = p_posid.
    * get WBS active status from table JEST
    SELECT
          objnr
          stat
               FROM jest INTO TABLE lit_jest
               WHERE objnr =  l_objnr AND
                     inact <> gc_yes.
    * get WBS status profile from table JSTO
    SELECT
          objnr
          stsma FROM jsto
                INTO TABLE lit_jsto
                WHERE objnr =  l_objnr.
    * combine JEST and JSTO table for user status
    LOOP AT lit_jest.
      IF lit_jest-stat CP 'E++++'.
        READ TABLE lit_jsto WITH KEY
                            objnr = l_objnr.
        IF sy-subrc = 0.
          lit_status-objnr = lit_jest-objnr.
          lit_status-stsma = lit_jsto-stsma.
          lit_status-stat  = lit_jest-stat.
          APPEND lit_status.
        ENDIF.
      ENDIF.
      CLEAR: lit_jsto, lit_status.
    ENDLOOP.
    *  get text for user status
    SELECT DISTINCT
             stsma
             estat
             txt04 FROM tj30t
                   INTO TABLE lit_usrtxt
                   FOR ALL ENTRIES IN lit_status
                   WHERE stsma = lit_status-stsma AND
                         estat = lit_status-stat  AND
                         spras = sy-langu.
    Let me know if you have any question.
    Regards,
    RS

  • How can we add user defined fields in My Account Profile?

    Hi,
    When adding new field for user,user groups,my resource,organizations and request all exist in the drop down menu list but the MyAccount(In the page where we add user defined fields).
    Please help me to add user defined field in MyAccount also.
    Thanks in advance.

    Hi,
    As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
    Regards
    Nitesh

  • User Status field on SAP Project System

    Hi,
    When view a project definition via tranx CJ20n, I see a field called User Status on tab 'basic data'.  When I do F1 to get the technical name, it referenced a field from the structure CNJ_STAT-STTXT_EXT.  How can I find out the table where the value for User Status are stored.
    Please advise.
    Thanks.

    check the below tables.
    TJ30   User Status
    TJ30T   Texts for User Status
    Field TXT30 Object status

  • System Status & User Status Fields/Tables for PM Order

    Hi All,
    May I know the PM Order System Status & User Status Field Names & Tables??
    Sundar

    Dear,
    Table- JEST  to get the status of the order &
    Table- TJ02T to get the text for the internal status & TJ30 to get the text of external status.
    regards
    sunil

  • How to change the text of a user defined field in dynamic selections?

    Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
    Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
    Found an OSS note - 86980 - that tells that this is not possible.
    But when we read the documentation on the user field (CJI3 - dynamic selections  - double click on user field - F1), it shows the following text:
    User-defined field in which you can enter general information with a length of up to 20 characters.
    Dependencies
    The names (key words) for  user-defined fields depend on the field key.
    Now the question is where to change the field key..
    Thanks,
    Ven

    Madhu - you did not get the question I think.
    Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
    Thanks,

  • User Defined Fields, Is Dropdown Selection possible?

    Dear Experts,
    In User Defined Field -1 can we define our own values, so that for this field we can make drop down selection, instead of manual entry.
    Facility seems to be available, as it shows balloon there. But no values of cource.
    Is it possible?
    If yes, How?
    SSanjay

    Possible but enhancement.
    Refer node:
    Project System>Structures>Operative Structures>Work Breakdown Structure (WBS)>Enhancements for Project Definition and WBS Elements>Create a Check of User-Defined Fields in a WBS
    Enhancement:CNEX0001    Checking user fields
    Component:EXIT_SAPLCJWB_001: for work breakdown structures
    Regards
    Sreenivas

  • Webclient - action in user status field

    Hello Folks,
    Can somebody give me a clue to create an action for the field user status?
    I´m using service tickets, and I need to advance a few days, depending of the user status.
    Any help is welcome.
    thanks
    Luiz David

    Hello Gary,
    Yes, I have to change it, in the screen, at sla view.
    And I have to change calculation rules for the due date for this ticket. I mean, dependind on the updates being processed in field user status, the sla date (due date) field, must be calculated again, and the new date must be shown in the screen.
    I know, when the user status is changed, a "submit" is made, in the ticket. My guess, it´s maybe there a possibility to create an action based on this field. Worst case a badi should be used. I don´t know exactly how does it works, or options to use here.
    Any info about, is welcome !
    thanks
    Luiz David

  • CRMD_ORDER - How to add user status for searching

    Hi Gurus
    Our requirement is that we want to search sales transactions in CRMD_ORDER by user defined statuses. Currently I can only search by system status (along with other standard criteria such as created by/direct processing etc). How do I add more search criterias so as to enable searching solely by user status?
    Please advise.
    Thanks

    Hi Jai,
    As per your requirement, i suggest u to check the Tx CRM_SRV_REPORT (standard Tcode)
    In this report you can change the layout of the screen after executing the report, and choose the user status from the layout.
    I hope this will help you
    Best Regards,
    Madhup

  • Add User Defined Field (Landed Costs Window)

    Hello All!
    Somebody can help us on this, we wonder if someone can tell us how can we add a user defined field in the Landed Costs Windows -> Fixed Costs TAB place.
    We were unable to add this field, and now we're thinking that's impossible through the USER DEFINE FIELD function, there's not reference about Fixed Costs TAB in this tool, but if someone knows the 'how to', please help us.
    thanks in advance
    jssanche

    Hi Sanchez,
    I am afraid you could not do that. User defined field is not be added into landed cost. Landed cost seems like process external bank statement. I have ever asked to SAP support about this (how to add UDF in process external bank statement) and they said it could be done using add-on. You have developed add-on to do that (DI/UI or UI API only).
    Rgds,

  • Need to add Message variant field in BD87 selection option

    Hi Friends,
    We have a requirement to add "Message variant" field in BD87 selction screen. Our technical team is doing analysis from there end. Mean time we came to know that the field can be added through report variant in customiziting. If anyone know how to add the additonal field thorugh customization Please guide us also please pro.

    Hi Jaheer ,
                     If you talking Abuot heading in out put screen then use TOP-OF-PAGE
    or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
    What I understand from your Question....
    Souman

  • How to add new additional field in my selection screen?

    Hi,
    In the BEx ,I have key and name in my report.While seeing the report, heading for  customer number is coming and heading not coming for customer description.I need to have it in my report.
    I.e
    Customer     !     (This heading is missing)
       7     GABRIEL CHEMIE GMBH - AUSTRIA
       9     BERGER PAINTS BANGLADESH LTD.
    Any tips?  Points will be given.
    Regards,Jaheer

    Hi Jaheer ,
                     If you talking Abuot heading in out put screen then use TOP-OF-PAGE
    or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
    What I understand from your Question....
    Souman

  • How to add user defined F4 help for s LDB field?

    Hi,
         I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
    Mahesh

    Hi Mahesh,
    I don't think so that you can attach a User defined F4 help in a standard LDB.
    What I would suggest is that you copy the standard LDB into Z LDB from SE80.
    Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
    Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
    And add the same field in the selection screen of the report and define the F4 help.
    Do not forget to attach the Z LDB to your report by going to the Attributes.
    Please refer to the code below for attaching a generic F4 help to a select options:
    report zrich_0001 .
    data: begin of ihelp occurs 0,
    field type char10,
    ftext type char50,
    end of ihelp.
    data: a_field(20) type c.
    select-options s_field for a_field.
    initialization.
    ihelp-field = 'A'.
    ihelp-ftext = 'Description A'.
    append ihelp.
    ihelp-field = 'B'.
    ihelp-ftext = 'Description B'.
    append ihelp.
    ihelp-field = 'C'.
    ihelp-ftext = 'Description C'.
    append ihelp.
    at selection-screen on value-request for s_field-low.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield = 'FIELD'
    dynprofield = 'S_FIELD'
    dynpprog = sy-cprog
    dynpnr = sy-dynnr
    value_org = 'S'
    tables
    value_tab = ihelp.
    start-of-selection.
    In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.

  • User status- when selected it logs date/time & User in Work Not. long text

    Hello,
    Is there a way when a user clicks on a user status on Work Notification the long text will be updated to date/time and username.
    For example:
    If we have 3 approval process: Supervisor Approved, Deputy Manager Approved,, and Manager Approved.
    When the Supervior press the Supervior Approved (User Status and saves) the long text on the Work Notification will update with log of  time/date & user. Then the same for the next 2 approvals.
    This will help us a lot.
    Thanks,

    Jay,
    I really dont know why you guys need to update the long text when user status has been changed. You could simply trigger the email to the approver who needs to be notified. but anyway if this is your rqmt, I think you can do it thru field exit. Talk to ABAPer and get a help from him
    Mahee

Maybe you are looking for