Add Userdefined field

Hi togeather,
i need a Userdefined field in the table "special prices for Business Partners"
is this possible??
Thank you all and best regards!
Serkan

Hi,
If you could not add using manage user fields, then you could use SDK code to add the UDF in the table special price.
I have ever asked this similar issue to SAP support in the last year. My problem is to add UDF in the process external bank statement (table OBNK) and they said it is impossible using SAP B1 gui but it is only able to use SDK code or addon.
Rgds,

Similar Messages

Enhancement to add userdefined fields for standard definition in cj20n

Hi all
sub:enhancement to add userdefined fields in a user defined screen tab for standard definition in t-code cj20n
can anyone provide an idea how to write the logic for retriving the data from the standard table into the user defined screen added into the project definition using the t-code cj20n( project system module)
thanks
sirisha

I think you may need to implement enhancement 'CNEX0007'
CMOD==> Enhancement==> Componet==> Get the Screen area.
Go to SE41 ==> Give the Screen program and number==> add your WBS tab there. The values will be available to screen
Hope this is helpful for your answer.
Cheers,
TM.

Change costcenters - userdefined fields

Hi ABAPers,
We use enhancement COOMKS01 to add our own fields to the cost center master data. This works fine.
Is there an FM/BAPI/.. to change the masterdata of costcenters. In particular to change the values of the userdefined fields?
Hope you can help me.
Bert

Hi Bert,
Actually, depending on what version/hotpack of SAP you are on, you can update the user defined fields on the cost center via the BAPI extension in structure EXTENSIONIN. Please read the standard SAP documentation on BAPIs regarding and how to use the EXTENSIONIN structure with your user defined fields.
Also you can look at BADI (Business Add On) definition "K_CCA_CUSTOMER_FIELD" via SE18 to see the BADI for the user define fields on the Cost Center Master for the BAPI. Depending on what version of SAP you are on, you might have to implement this BADI. (4.7 we had to implement the BADI where as pre 4.7, I don't think you need to implement the BADI, just use the extensionin structure)
I hope this helps.
Mike V.

How can I add form field value to the file name in save as dialog box

I do not want the form to be saved automatically, just want the form to auto populate the "file name" only.
A little background on the forms I want to use: My company has 70 retail outlets, I'll use one of our pdf forms called an "Incident Report" as an example. I would like for a store manager to be able to complete the form, then email the form to the main office (I already have javascript to add field values and form name to the email subject line), once the main office receives it, I want for them to be able to file the pdf electronically on our server. We have mutliple forms that we use so I do not want any of the forms to automatically save anywhere, (at this time anyway) I just want the office personnel to be able to click "save as" (or whatever they will need to click) and the form automatically add certain field values from the pdf they have received, of which will be different each time the form is sent to the office (Date, store #, employee name etc.) in addition to the name of the form in the "File name" of the "Save As" dialog box. The main office employees will decide into which server file the pdf should be saved.
I'm using Acrobat 8 professional, the stores and office personnel use Adobe reader.
One little note: We currently print and file a lot of paper on a daily bases, as soon as I can get this to work, we are going green.
Me and a lot of trees in this will really apprecitate any help you can give with this! :-)

You might want to take a look at the document "Developing Acrobat Applications Using JavaScript" (js_developer_guide.pdf) which is part of the Adobe Acrobat SDK, which can be downloaded here. Read the "Privileged versus non-privileged context" (p. 45ff.). You will find an example for "Executing privileged methods in a non-privileged context". Should be almost exactly what you are looking for.
Small Outline: For security reasons ("the user always has to know what's going on") you are not allowed to use the "Doc.saveAs"-method without the user permission (--> in a non-privileged context). In order to reach the goal of a privileged context you can use a trusted function. You do this by creating a JavaScript file (*.js) in either the Application-JavaScript-Folder (default location on Windows systems: "%ProgramFiles%\Adobe\Acrobat 10.0\Acrobat\Javascripts") or the User-JavaScript-Folder (default location on Windows systems: "%AppData%\Adobe\Acrobat\10.0\JavaScripts"). Add the following content to the new file:
myTrustedBrowseForDoc = app.trustedFunction( function ( oArgs ) {
     app.beginPriv();
          var myTrustedRetn = app.browseForDoc( oArgs );
     app.endPriv();
     return myTrustedRetn;
myTrustedSaveAs = app.trustedFunction( function ( doc, oArgs ) {
     app.beginPriv();
          var myTrustedRetn = doc.saveAs( oArgs );
     app.endPriv();
     return myTrustedRetn;
The developer guide actually wants you to add this content to the existing "config.js" file. I recommend creating a new file, since its easier to deploy in a network. Either way, every client/user who needs to be able to save documents this way, needs this JavaScript Code in his Application/User-JavaScript-Folder.
Within the Acrobat Document, which you want to obtain a certain file name, you can now use the trusted functions "myTrustedBrowseForDoc" and "myTrustedSaveAs" to store the file. To call the trusted functions and deliver the file name you can either you use a form field (button) or you add a new menu item. Add the following JavaScript Action to the button/menu item and change "Roller Coaster" to the name of the field which contains the value which you want to become the new file name:
var fileName = this.getField("Roller Coaster").valueAsString;
try {
     var oRetn = myTrustedBrowseForDoc({bSave: true, cFilenameInit: fileName + ".pdf"});
     try {
          myTrustedSaveAs(this, { cPath: oRetn.cPath, cFS:oRetn.cFS });
     catch(e) {
          console.println("Save not allowed, perhaps readonly.");
catch(e) {
console.println("User cancelled Save As dialog box");
Good Luck!

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to add custoim fields on the additiondata b tab of va01 and va02

Hi All,
   i want to add the field on the Additional data B tab of the VA01 and VA02 at header level.
    Already one field is there now i want to add one more field.How to proceed.
   I think i have to go with screen exits.Can you help me in proceeding further and where should i write the code.
   It is urgetn.Please help me

I have to move the updated fields to the vbak table
The code is like this
If      VBAK-ZZGrswgh   less than    ZTRKLMT-ZZweight OR
        VBAK-ZZCubTot    less than    ZTRKLMT-ZZCube   OR
        VBAK-ZZPaltot      less than    ZTRKLMT-ZZPallet
              CLEAR VBAK_ZZTRKLMT.
Else
              MOVE X TO VBAK_ZZTRKLMT.
End if
should i write this code in the USEREXIT_MOVE_FIELD_TO_VBAK of program MV45AFZZ ?
This user exit should trigger when
VBAK-AUART Equals 'ZWH' OR
    VBAK-AUART Equals 'ZFV'
Reply soon

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

How to add extension fields and mashups to partner solution?

To add extension fields and mashups I have log on to the system using a user with adaptation rights.
There's no possibility to do that from within the UI designer, right?
Now, if I adapt the screens with extension fields or by creating and adding mashups, how do I add these enhancements to my partner solution?
Or in other words, how do I ship extension fields and mashups with my partner solution?

Before you use the key user tools, you must "enable key user tools" in copernicus by right click on the solution. Now the changes will be added to the partner soltution transport order.
But you can add extension field in copernicus as well by adding new item "business object extension" to the partner solution.

How to Add parameter fields in BI publisher fields

Hi,
I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
So i got the XML file from output of the report.
Then i added the xml data in BI publisher and then i have created the .rtf for that.
Here i need to add some fields which is not available in fields list (in BI Publisher).
How to add that fields, or is possible to add fields manually.
That fields are given as parameters while running the .rdf file.
Please tell me how to solve this problem.
Is possible to add fields manually means tell me how to do that.

If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
<?param@begin:P_CONC_PARAM?>
and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

How to add custom fields in BADI Subscreen.

Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.

Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju

How to add new fields in collaboration tasks?

Hi experts,
Currently, by default, we are able to see in the collaboration tasks rooms fields as "Subject", "From", "Sent Date" , "Due Date" ,
"Status"...
Now i want to add new custom fields apart from standard; when i create new tasks i want fill this new fields and after, display this fields in the UWL.
Can you please let me know how to add our own fields in the collaborations tasks rooms ?
Thanks in advance,
Regards,

Hi Victor Capi,
Could you have a look at the following link.
http://wiki.sdn.sap.com/wiki/display/KMC/XMLFormBuilderinEP7.0
Formsbuilder open the collaboration project and you add the fields. Then import the xml to your portal.
Regards,
Prabha

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

ME23N purchase order history - add new fields (not in layout)

Hello,
I would like to expand the layout of Purchase order history (ME23N).
I would like to add the field MKPF-BKTXT into the purchase order history for more information.
Who can help? - Thank you. - Dietlinde

Hello,
You might have to enhance the column set of the layout..I am not sure if it could be done.. but that's the way to go.. You might want to confirm this from your technical team.
Good Luck!!

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

Add Userdefined field

Similar Messages

Maybe you are looking for