Enhancement to add userdefined fields for standard definition in cj20n
Hi all
sub:enhancement to add userdefined fields in a user defined screen tab for standard definition in t-code cj20n
can anyone provide an idea how to write the logic for retriving the data from the standard table into the user defined screen added into the project definition using the t-code cj20n( project system module)
thanks
sirisha
I think you may need to implement enhancement 'CNEX0007'
CMOD==> Enhancement==> Componet==> Get the Screen area.
Go to SE41 ==> Give the Screen program and number==> add your WBS tab there. The values will be available to screen
Hope this is helpful for your answer.
Cheers,
TM.
Similar Messages
-
How to add search help for standard field LIKP-TRAID
Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
AbhiHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
How we can add custom field in standard report 2kee.
Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
RaviRavi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM -
PS: Setting Project Profile as a mandatory field for Project Definition
Hi,
I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01). I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc. Would appreciate if you can share your expertise on this.
Thanks!
Regards,
VivianHi,
I would like to know how to include some additonal fields in OPUK/OPUJ. We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ. We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
Thanks!
Regards,
Vivian -
Add new field in standard transaction
Could ou please tell me that can we add material field in standard transaction VF04 selection criteria.
if yes then how?
regards,
Amarhi Amar,
check this thread
Re: Additional Fields in Selection Screen of VF04 - Billing Due List
it might be helpful to you.
thanks
Sachin -
Need exit to add new fields for Vendor master creation
Hi All,
I have to add a new screen with some fields in Vendor master (Xk01) creation. Can any one suggest me
any screen exit / user exit through which I can add these fields.
Please explain the procedure to add the fields through exit.This will be of great help.
Thanks
Vinod.run the following program which ggives available exits for tcode
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
How to add new fields for ESS leave request
Hi friends,
Can u please help me with my issue.......
My issue is to add new fields in ess/leave request i.e...
The component needs to be Checked-out through Net Weaver Development Infrastructure, make the necessary enhancements, and finally Check-it-in back to NWDI.
Custom Function Modules are to be invoked apart from the standard ones that are already available in the Leave Request component ess~lea inorder to accommodate the extra absence-type logic.
can u please sujjest me where should i make changes in the given 14 components
means in which view i have to add these fields.................
Regards
RajeshHi Rajesh ,
Check whether u are able to find the ess dc's under inactive dc's in webdynpro
If ur not able to find it then Check the landscape configurator in CMS and also the transport studio and confirm that ess packages are imported fine
Ganesh ,
for creating a DTR client u need to open the DTR perspective right click and "create clients" before that go to windows ->preferences of the NWDS and check the development infrastructure URL is gven correctly ...try pinging it once...
Do check ur SLD is up or not!!!
Regards
Krishna
Message was edited by:
krishnagopal Mukundan -
Add one field in standard report
Hi all,
I want to add one field in the standard report WS_MONITOR_OUTB_DEL_FREE.
For this I didn't find any User exit or BADI? What is the procedure to add the field in the standard report
regards,
RamaHi Ram,
it would be very difficult for you to find an enhancement for such a requirement.
Though i can suggest you to do following analysis and then decide.
See which version you are using if you are using ECC5.0 or above you can use implicit enhancement to append field to the final structure of your report as using implicit enhancement you can add fields to structures.
then find another implicit enhancement to populate this field in your structure.
thanks -
How to add a field in standard tcode pa30 with info type 21.
Hi Experts
I need to add a field Child Allowance Entitlement in PA30 transaction where infotype is 21, this field is available in table P0021 but which is not active in standard transaction.
I just check in SPRO Settings - > Personnel Management - > Personnel Administration -> Customizing user Interface -> Change screen modificaion -> in that i gave the module pool number as mp002100 and screen number as 2000. the field is not shown there. but in alternative screen 2005 that field is available how can i display that field in the standard transaction pa30 with infotype 21.
Can anyone please suggest me to display the field in the standard transaction.
Regards,
Vijayan.RHi Vijayan,
to modify the infotype screen for your purposes, you have to maintain feature P0021 as mentioned above, in order to obtain your screen modifier.
Usually this modifier is equal to your corresponding MOLGA.
This modifier is then used in V_T588M, when you can assign alternate screen modification to your modifier.
Let`s say :
Modifier 06 - France - Screen 2000
Modifier 01 - Germany - Screen 2000 with some hidden fields.
I hope it helps
Best regards
Ondrej
Edited by: Ondrej Smutny on Aug 15, 2011 10:38 PM -
Need to add one field in standard structure???
Hi Experts,
I wanted to add one Z-field in standard structure. Anybody will suggest me how to do that step by step??open the table in se11 and press append structure in application tool bar
press create button on pop up window.
give the append name and include the fields u required.
Yes, you can add the extra fields to the standard table.
Create Z-Structure with the fields needed and append the structure to the standard table by using the option append structure within table display
we can enhance the standard tables by using Append structures and customizing includes.
Append structures allow you to attach fields to a table without actually having to modify the table itself. Table enhancements using append structures therefore do not have to be planned by SAP developers. An append structure can only belong to exactly one table.
In contrast, CI_includes allow you to use the same structure in multiple tables. The include statement must already exist in the SAP table or structure. Table enhancements using CI_includes do, however, have to be planned by SAP developers
regards.
Rahul
reward if useful -
Modify and add new field in standard Purchase Order script
Hi All,
I have some problem with Modify and add some new fields in Standard Purchase Order script. From ME22n transaction code it display PO detail. In <b>item detail</b> with <b>condition</b> tab all data will display in Currently PO script output.
But I want to display ME22n->Item Detail->Invoice->Taxes Data. how to display this data in standard PO script. All data are fetch from <b>Structure</b> like ( KOMV,KOMVD..etc) then How it can be Display?
Waiting for Replay.
Himanshu Patel.Work with an Abaper.Tell your requirement [ addition of a field] and ask him to include this field by using the functionality " Field Exit".
-
How to add customized fields for free search in PA30
Hi,guys
I have created some customized infotype. and I want to add the field of that infotype into free search.
How do I do that?
Please help
Thank you in advanceHi Luke,
I am getting follwoing error in cds file 1906. 05 Oct 2011 09:46:58 ERROR com.nakisa.Logger - com.nakisa.framework.data.commandProcessor.impl.OracleCommandProcessor : getDataTables : Problem executing query. Data Element Name: SAPOrgUnitDataElement.
This error is only coming in Quality & not in dev. In Dev, It is showing Org Structure for a scenario but in Quality, it is showing a blank screen & giving this error in cds log file.
I have copied SAPOrgUnitDataElement.xml into SAPOrgUnitDataElement_copy.xml & then used standard SAPOrgUnitCostCenterInheDataElement data element to create a linked data element called SAPOrgUnitDataElement (using SAPOrgUnitDataElement_copy & SAPOrgUnitCostCenterInheDataElement).
All the fields in SAPOrgUnitCostCenterInheDataElement got added in source Organization Structure feilds & I have also added cost center name field in view but still it is not showing in scenario Org chart in dev. Because of data issues, I thought to test it on Quality but there I am even not able to see Org chart for a scenario & it is giving above said error in cds log file.
Please help!
Thanks,
Prashant -
Can we add new field in standard idoc segment ?
HI all,
My requirement is to add new field in segment named E1EDL44 (Idoc named - DELVRY03).
Please guide me how to proceed.
thanks
manishHi Manish,
You cann't add any new fields into any of the standard segments like E1EDL44 segment.
Inorder to achieve this you need to do the following:-
Create a new segment and with the new fields and this new segment should be added as a child segment to the E1EDL44 segment. You need to write a piece of code to populate that new segment in the userexit. You should create a extension for your basic type DELVRY03. This way you can achieve this scenario.
Thanks,
Mahesh. -
Hi togeather,
i need a Userdefined field in the table "special prices for Business Partners"
is this possible??
Thank you all and best regards!
SerkanHi,
If you could not add using manage user fields, then you could use SDK code to add the UDF in the table special price.
I have ever asked this similar issue to SAP support in the last year. My problem is to add UDF in the process external bank statement (table OBNK) and they said it is impossible using SAP B1 gui but it is only able to use SDK code or addon.
Rgds, -
Add key fields for FM REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi everyone,
I would like to ask if it is possible or is there a way to increase the number of key fields used in FM REUSE_ALV_HIERSEQ_LIST_DISPLAY. The table parameter for the key fields is IS_KEYINFO. It can only contain 5 key fields. My program needs to have 7 key fields. I cannot modify type group SLIS to add more fields in its type declaration since it is a global object.
Thanks,
EricHi everyone,
I would like to ask if it is possible or is there a way to increase the number of key fields used in FM REUSE_ALV_HIERSEQ_LIST_DISPLAY. The table parameter for the key fields is IS_KEYINFO. It can only contain 5 key fields. My program needs to have 7 key fields. I cannot modify type group SLIS to add more fields in its type declaration since it is a global object.
Thanks,
Eric
Maybe you are looking for
-
NEW ITUNES 10.7 UPDATE DOES NOT WORK
OK PEOPLE AT APPLE.....ALL I SEE ARE QUESTIONS RELATED TO THE NEW UPDATE ITUNES 10.7..I WAS ON THE PHONE FOR 2 HOURS YESTERDAY WITH TECHNICAL SUPPORT..AND THEY COULDNT EVEN FIX THE PROBLEM......SINCE I DOWNLOADED THE UPDATED VERSION I CAN OPEN ITUNES
-
Your transaction date is earlier than its parent transaction
Hi, WE just upgraded from 11 to 12 and when our end-user goes in to receiving transactions he get's a message: Your transaction date is earlier than it's parent transaction. Cause: You tried to enter a transaction date that is earlier then the parent
-
Having trouble importing video files
hi, look Im kind of new on this program so I have been importing video files to the project but when I watch them they appear without sound. If I open them in quicktime or any other player they do have sound but its like final cut does not recognize
-
Can access secondary User Accounts but when in one no windows show up?
Hi there, We are running an iMac Intel Core Duo 2 with 10.5.8 and are having issues with a second account. We set it up so that my girlfriend and I have an account each for our own iPhones. However we can't get her one to work. We can access it and i
-
P re-ordered a book from the app store. notified to download. When I follow the steps to download it states you have already purchased. Any ideas??