Adding a checkbox to contracts screen in SRM help

I am not to sure, but my question is can i use bbp_cuf_badi to add a checkbox to the screen and do the validations inside that badi ?
Or do i have to modify the web dynpro adding the checkbox there ? Thanks!

Hello,
Will this checkbox be used in BBP_DOC_CHECK_BADI, BBP_DOC_CHANGE_BADI and/or the create back-end documents BADIs? If, so then I think adding the field to the appropriate S/C structure should work for you. There are several OSS Notes regarding this....
OSS Note 458591 - User Defined Fields- Preparation and Use
OSS Note 672960 - User Defined Fields 2
Regards, Dean

Similar Messages

Addition of new tabs under contract item screen in SRM 7.0

Hello Experts,
My requirement is to add the three new tabs with custom fields under the contract item screen.
I thin i have to user web-dynpro ABAP for this requirement since it is SRM 7.0. Once i developm the web dynpro applications separately for each tab, how do i integrate those web dynpro with the contract item dynpro and how to populate the values for the new fields added in the tabs. if i want to fetch the data from the custom tables into the tabs, i need to create a new web dynpro where i will write the logic to fetch the values, but to fetch the values i should first get the input data from the contract scrren which is a standard application. In the new tabs, i need to display and edit values for demands ( purchase requisitions ) for that contract line items, so i sould get the material number, year of demand, purchasing organisation etc from the contract screen. So it means i have to enahnce the main screen for contract item.
Please advise how to achieve this.
I have seen the details for adding a new fields to the the contract item scrren and some oss notes , but here i need to add the new tabs and custom fields into that and i need to integrate these data with the contract line item.
Your help is very much appreciated
Regards,
Srinath

Hi,
I think you need to enhance the existing WebDynpro.
Just FYI. Good to know WebDynpro side enhancement techniques.
6 series on User Interface flexibility in WebDynpro ABAP.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
ABAP UI Flexibility Part 1: Demo Overview
ABAP UI Flexibility Part 2: Floorplan Manager
ABAP UI Flexibility Part 3: Feeder Classes
ABAP UI Flexibility Part 4: BADIs
ABAP UI Flexibility Part 5: BRF+
ABAP UI Flexibility Part 6: Looking Ahead to 7.02
Regards,
Masa

Change to contract screen srm

I am trying to extend some fields in srm in the contracts. Is there a transaction where i can go to, to see if i added the fields correctly? thx.

Hi,
I hope you have added the fields on the contract screen based on the OSS Note: 672960 - User-defined fields 2.
The trasaction is BBP_CTR_MAIN for the contract. You can actually go to transaction SICF.. Enter this in service BBP_CTR_MAIN field. In the next screen you will have to right click on BBP_CTR_MAIN and then select test service . Here a web page will open with contract screens. Check your fields here.
Thanks,
Pradeep

New buttons on SRM contract screen? (+)

Hello,
I'm asked to add specific button into the SRM contract screen (BBP_CTR_MAIN transaction). I've been trying to use BBP_CUF_BADI, but achieved none - my customer screen is not displayed at all. However it is called - I've checked it using the debugger. What am I doing wrong?
Thanks in advance.

Hi Cyrill,
Please go through the following lnks,
Add a new button to BID Invitaion
Add customer button to check status screen
Hope it helps.
Thanks,
Pradeep

Process contract screen error

Hi,
We are in SRM 5.0 version. When we go for process contract screen. A default value is present over there. Even after deleting the value when a number is entered. It appends with the default value resulting in no results found.
Example
Contract number default values comes rty
when it is deleted and entered 457
systems appends with rty;457 resulting in no results found.
Please advise on this issue.
Regards,
Basha

Hi,
as i understood that we need to specify the source system name / name give for your source system in SM59.
regards,
Vishwa

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

Contract Creation in SRM 7.0 classic scenario

Hi All,
We are using SRM 7.0 Classic scenario with ECC 6.0 EHP 4 and CLM 2. We are creating contracts in SAP CLM and pushing into as Global outline agreement.
Question is -
1) Can we create contracts in SRM 7.0 Classic scenario ?
2) Instead of transfering the ECC outline agreement to SRM , can we directly use ECC outline agreement as a source of supply in SRM while creating a SC.
3) How we can transfer the SAP CLM 2.0 contracts into SRM 7.0 and use a source of supply there while creating a SC ( Considereing that these CLM contratcs are also transfered to ECC as a outline agreement)
What are the mandatory fields required to transfer the CLM contracts contracts to ECC outline agreement - I know ,Vendor, Purchase org, Pur grp, company code are required - is product catagory is also a mandatory field.
Rgds/Pawan

Hi Pawan,
Please find the answered for your questions:
Question is -
1) Can we create contracts in SRM 7.0 Classic scenario ?
Mitesh: Yes we can very well create in Classic Scenario as well in SRM 7.0.SC can be pushed to SOCO based on the Prod Category configuration in SPRO.From SOCO PO, Contract and RFX can be created for SC.
2) Instead of transfering the ECC outline agreement to SRM , can we directly use ECC outline agreement as a source of supply in SRM while creating a SC.
Mitesh: I dont think we can use ECC outline agreement as source of supply in SRM while creating SC.Contract replication in SRM 7.0 with EHP 4 ECC is eSOA based and ONLY Outbound to SRM (inbound to ECC).Contract cannot be replicated from ECC to SRM.
3) How we can transfer the SAP CLM 2.0 contracts into SRM 7.0 and use a source of supply there while creating a SC ( Considereing that these CLM contratcs are also transfered to ECC as a outline agreement)
+Mitesh: Standard intergeration of CLM/ESO to SRM 7.0 is very much there in roadmap for future releases of SRM/ESO.+
+As of now there is a consulting solution available to integerate ECC and ESO/CLM.+
+This logic can be leveraged to integrate ESO/CLM to SMR 7.0 (or lower version) requiring Developement effort from SRM functional,SRM technical,PI, Basis,ESO and java consultants.+
+Such contracts can be forced to be used as Source of Supply or alternatively replicated to ECC Via standard repliation scenario.+
Hope this helps.
Regards,
Mitesh

Custom fields on Purchase order screen in SRM are missing.

Hi ALL,
SRM 5.0 R/3 4.6c
We have custom fields which appear on the create PO in SRM, the criteria for these fields to appear is if the item is of service type.So if its service item there will be additional/ custom fields for input purchase order screen in SRM,
But at this these fields dont show up for service item PO's . this is happening in Q and P environments while it is working fine in D and S. No changes were made to the system.
Also if I look in to bbp_pd info for the previous service PO, the data shows up in bbp_pd but the data or the custom fields are missing on the web.
We tried deactivating/activating the custom class in Q , but that did not help us!
Consider this as urgernt!
Can anyone please throw some light on this!
Thanks
Krishna

Have you implementated the BADI: BBP_CUF_BADI_2
if yes, then keep a break point there and see if you are missing any thing there...

Adding new modules to Selection-screen

Hi everyone,
I created 3 selection-screens for my report, but I needed to control better their jump between screens, so I added PAI modules on each screen.
The thing is that when I make a change on one of the screens the calling of the module disapears, so I just kept on placing the calls and avoided the change in the screens.
No the problem is, when I transported my report to the quality system, everything was fine, with my modules in my code. Now I transported a change and in the quality system, the calls where lost.
Any ideas how to transport everything?!
Thanks

You must not modify the screen (add PAI or PBO) with a program type 1 (report).
If you want to modify screen, you change your program type module pool and create the screens.
Salu2.

Using checkbox at selection screen

I used checkbox at selection screen and i want output as per selected checkbox. How to do that??

hiii
use following code
AT SELECTION-SCREEN.
IF p_char EQ 'X'.
    w_check = 'X'.
    WRITE: w_check.
ELSE.
    w_check = ' '.
    WRITE: w_check.
ENDIF.
SELECT b~carrid                      "Carrier Id
         b~connid                      "Connection id
         b~fldate                      "Flight date
         b~price                       "Price
         b~currency                    "Currency
         b~seatsmax                    "Maximum Seats
INTO TABLE t_flight
FROM spfli AS a
       INNER JOIN sflight AS b ON a~carrid = b~carrid
      INNER JOIN sbook AS c ON c~carrid = b~carrid AND
                                       c~connid = b~connid AND
                                       c~fldate = b~fldate
          WHERE b~carrid IN s_carrid AND
                          c~cancelled EQ w_check.
regards
twinkal

Caption on logon screen in SRM 5.0!!

Hi,
We want to display a caption on the SRM 5.0 screen in the header area. The caption will be "Welcome, USER-NAME". We are trying to change the HTML Template to get this output. However, since I do not know HTML codes, I dont know how to dynamically get the current user name on the screen.
Please help with your suggestions.
Regards
Rajeev

Hello Rajeev,
if you want to make an output to your HTML document, simply add
write(something);
to your template. In your particular case you can use
write("Hello " & ~login);
Please take the ` (backticks) into account. At start the template is in HTML Business mode. But with a backtick you can switch to HTML (and back to HTML Business).
Example:
`<html><body>`write("Hello world!");`</body></html>`
Best regards,
TJ

How to disable Login Screen in SRM

Hi All,
Client has enabled SSO in their system and SRM is part of it. Hence they are not directed to SRM login page.
But for certain cases and unknown reasons, the login page appears. So they want to diable the login screen page and display error text instead.
I tried to modify the template BBPGLOBAL - Login, but is not successful. Even if I comment out the whole code in the template,the screen is displayed.
Is this something to do with ITS ?

Hi ,
Go through the OSS Note : 778488
Also see the following link:
Re: SRM portal page customization
Login screen
Hope this helps.
Thanks,
Pradeep.

Issue with Contract Replication from SRM to MDM - XML structure

Hi
We are having an issue with trnsfering a contract to MDM. We have released the contract for update to MDM in the contract through the distribute to catalog option. An XML is generated in SRM that gets sucessfully passed to PI through Catalogupdatenotification_out. In PI the XML fails in the Interface Determination step. the issue that has been noticed is that the XML that is generated in SRM does not contain product category or product ID which is basically what the condition mapping in PI checks for. The conditions in PI were setup as per SAP.
But now the XML fails in PI because it does not find a combination for Catalog type code = 03 and product category. Please find the XML structure in SRM and you will see that it does not have a product category even though the contract has one.
<?xml version="1.0" encoding="utf-8" ?>
- <n0:CatalogTransmission xmlns:n0="http://sap.com/xi/EBP" xmlns:prx="urn:sap.com:proxy:SS1:/1SAI/TASDE808778FFEB81012891:701:2010/10/07">
- <StandardBusinessDocumentHeader>
<ID schemeID="0080">56000004100000000220110616202243</ID>
<CreationDateTime>2011-06-16T20:22:43Z</CreationDateTime>
- <SenderParty>
<InternalID schemeID="PartyID" schemeAgencyID="SS1CLNT100">143</InternalID>
</SenderParty>
</StandardBusinessDocumentHeader>
- <Catalog>
<ID>5600000410</ID>
<CatalogTypeCode>03</CatalogTypeCode>
- <NameList>
<Name>(Copy of Contract 5600000395)</Name>
</NameList>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>true</CompleteTransmissionIndicator>
- <ValidityDateTimePeriod>
<StartDateTime>2011-06-13T12:00:00Z</StartDateTime>
<EndDateTime>2012-06-12T12:00:00Z</EndDateTime>
</ValidityDateTimePeriod>
- <CatalogContent>
- <ItemList>
- <Item>
<ID>1</ID>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
- <PropertyValuationList>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE</PropertyReference>
- <PropertyValues>
- <MultipleValue>
<Index>1</Index>
- <SimpleValue>
<AmountSpecification currencyCode="USD">1.0</AmountSpecification>
</SimpleValue>
</MultipleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>CCM/PMNTTRMS</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<NameSpecification>0002</NameSpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
</PropertyValuationList>
</Item>
- <Item>
<ID>2</ID>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
- <PropertyValuationList>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE</PropertyReference>
- <PropertyValues>
- <MultipleValue>
<Index>1</Index>
- <SimpleValue>
<AmountSpecification currencyCode="USD">12.0</AmountSpecification>
</SimpleValue>
</MultipleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>CCM/PMNTTRMS</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<NameSpecification>0002</NameSpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
</PropertyValuationList>
</Item>
</ItemList>
</CatalogContent>
</Catalog>
</n0:CatalogTransmission>
Edited by: vishakhrajeev123 on Jun 20, 2011 6:49 PM

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

In BDCs, after adding one field to the screen, which one is the better proc

Hi,
My client requirement In BDCs, after recording the legacy data by using MM01, After some time adding one field to the screen, How can we record the for the new field.
If any one knows pls help me total process.
Warm regards,
Venkat.

Identify the screen in which this new field is added and simply add one more line to add the bdc record for this field in that screen.
If the screen is also entirely new, then you have to identify the previous screen, the okcode to go to this new screen and finally the next screen and the okcode to go to the next screen along with the field BDC record.
I don't think it is necessary to redo all the recording as long as you can follow the existing code.

Central contract functionality in SRM 7.0?

Dear Experts,
I would like to have few clarifications about central contract functionality in SRM 7.0.
As per understanding, from SRM 7.0, there is no two separate documents like local contract and GOA (global outline agreement--contract for backend ERP systems). Now, SRM have only one document -Central contract to be used in sourcing for various backend systems as well as the SRM system itself.
Now, my question is as below:
Since the central contract is released into various backend ERP systems, do the backend requisitions needed to be transferred to SRM system to use the central contract as a source of supply . or the backend requisitions can be assigned to the central contract in the ERP system systems itself (without sending it to SRM system ) and released to suppliers?
Your inputs will be highly appreciated.
Thanks and regards,
Ranjan

Hi,
From ERP 6.0 EhP4, ERP transactions can look at SRM central contracts.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/52/43df4725704c6393a49a4d671e0f59/frameset.htm
Regards,
Masa

Adding a checkbox to contracts screen in SRM help

Similar Messages

Maybe you are looking for