Adding a Date Field to a Report Painter
Hi,
Could someone please throw light on adding a date field (for example, scheduled finish date of network) to a report painter report? I don't think this field (or any date field for that matter) is available as a characteristic for report painter.
Hi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra
Similar Messages
-
Using the same data field on a report
Post Author: Lukey1972
CA Forum: General
Hi can anyone help me please? New to crystal reports and I have added the same Data field on a report being and I need to filter these one for Credits and the other for Debits. When I use Select Expert it effects both columns. I know that there is a logical way of doing this but being new have yet to be able to find it. Please help.Post Author: DHBelgium
CA Forum: General
Hi there,
you can put a block filter on the data saying ex facturation is equal to c or to d leaving you only with credit or debit amounts.
Are you using webi?
Greetz,
David -
Selection screen fields order in report painter report..
hi experts,
i have a problem with selection screen fields order in report painter report.
Actually in report painter report selection screen order is different compare to report writer report selection screen.
how should i get the same selection screen fields order For Report painter report compare to Report Writer report ?
For example, Report Writer selection screen order is:
ledger:
company code:
period:
current fiscal year:
previous fiscal yer:
previous quarter end period:
where as Report Painter selection screen order is:
ledger:
previous fis year:
current fis year:
company code:
period:
previous quarter end period:
please help me regarding with this.
Thanks and Regards,
NAGARJUNA.hi nagarjun,
Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
Ex:
Selection fields No
Exclude Cancelled Lots 5
Material number 1
Plant 2
Material type 3
Inspection Lot Origin 4
Regards,
Lokesh -
How free field works in report painter
Hi,
Please provide me how free field works in report painter.
Thanks & Regards,
Radhakrishna.Sorry, but this is not related to SAP on Oracle.
I would try ABAP forum instead. -
BAM Alerts - When a data field in a report meets specified conditions
Hi ,
Please find the below mentioned issue , which I am facing at the time of creating BAM alerts.
I have created a data object, when i am creating the bam alert [ create new alert --> create rule --> when i select an even " When a data field in a report meets specified conditions" and "When a data field in a data object meets specified conditions" then below in rule expression I am unable to edit the expression of "this data fields has a specified condition of x".]
Appreciate your quick response.
VAMSI.PHi,
I am having the same issue, and I am on IE9. When I was on IE8 I had no problems. Are you also on IE9
Thanks
Judy -
Added custom date fields at contract;need to trigger mail using those dates
Hi,
II have added 14 custom fields in the service order quotation for handling waranty start date and end dates capturing for the maximum of 7 years contract.
Then its usual yearly action of the waranty team to put the dates in those fields.
The first set of 2 input fields will be filled at the quotation creation itself; rest the set of 12 fields will be updated in this 7 years time.
My requirement is such that to the capture all the waranty end dates filled in the input fields and trigger a mail 30 days prior to that days.
Example : I have contract from 01/08/2004 to 31/07/2010.
Then my waranty startdate / end date can be filled by waranty team as 01/08/2004 to 31/07/2005 in the waranty first year.the i need to trigger a mail to waranty team on 01/07/2005.
For the second year if we have dates filled as 01/08/2005 to 31/07/2006; then to trigger mail on 01/07/2006.
I have tried using ACTIONS but couldn't get much help.
As a work around thinking for a report to fetch the contract for that Trans.type and check the dates with the present date + 30 and collect those to perfrom the respective actions.This is workaround.
Tried using the DATE TYPES creating 7 different DATE TYPES and assigning the ( end dates - 30 ) to that manually upon save.
and using this DATE TYPE along with the action definition can we acheive ? but it too will be work around.
How to acheive this one. It became critical now in the project.
Thanks and Regards,
Satish AkkinaHi,
In your scenario, you don't need synchronous email facility.
Probably you can create a z table and maintain all required dates in this table (before saving your transaction somewhere you would have to read your custom fields and save them in this table along with object ID/GUID). Then create a report that would read dates from z table and then send emails to your warranty team. Schedule this report in background with frequency of once day.
Hope that helps.
Regards,
BJ -
Adding new date field to already loaded data target.
Hi,
we have a cube containing date feild such as 0CALMONTH. the data is being loaded to the cube. now they have added new date feild (0FISCYEAR). how to get data to this feild. there is no data coming from source system for this feild. please can any one tell me how to include this feild and load data into it.
with regards,
sreekanth.Sreekanth,
If Record creation date is the right field for deriving fiscal year, Why cant you derive the year from the date...by using automatioc time conversion...?? In update rules...??
For exising data, you can do loop back to populate the data. see the below doc, for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f421c86c-0801-0010-e88c-a07ccdc69601
Hope it Helps
Srini
Message was edited by: Srini -
I have a status of completed and a date field in the dataset. The date field is either empty or contains a date. All 2015 dates are holding dates.
So how can I limit the report to only pull completed status with an empty date or a holding date?
I have not been able to set an OR option on a date field filter and if I add two filters on the date column one for empty one for > 12/31/2014 then it treats it as an "and" and pulls nothing from the list I have in sharepoint.
any help will be appreciated.Hi MB,
In Reporting Services, the relationship of filters is “And”, and there is no option to change the relationship from “And” to “Or”. While we can use “or” operator within the expression to create one filter to integrated all filters to work around this
issue.
We can add a filter as follows in the dataset to limit the rows in your report:
Expression: =Fields!date.Value is nothing or Fields!date.Value>"12/31/2014" Type: Boolean
Operator: =
Value: true
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Sending reports to various recipients using a data field on the report
Hi,
I am currently running Crystal Reports Server 2008 with SP 3 applied.
I was wondering if this was possible.
I have a report that I would like to be sent to an email address field on the table that the report runs from. Fields are something like this:
Amount Due, Invoice #, Client's email address, Date
What I would like CRS to do is send out emails depending on what's on the table. Obviously I would need the server to send out the report to a particular client with only the records that should be for them.
I, for some reason, thought there was an ability to add a field from the report on the email itself using brackets or some sort of variable but I'm not sure if this is true.
If anyone can help, I would appreciate it greatly.
Thanks!You can use Publications for that. As far as I know this should be supported natively in CRS 2008 with SP3.
Take a look at the demo on building a data-driver publication here:
http://www.sap.com/solutions/sap-crystal-solutions/information-infrastructure/sapcrystalserver/featuresfunctions/index.epx
You have to have CALs (concurrent access licenses) though.
Regards,
Stratos -
Data not captured in Report Painter
Dear All,
I have created a COPA Report by using the Report Painter,but when I execute the report the system showing as "No records were selected"
Note that all the values are flowing properly in to KE24 report (standard line items report).
I have checked throughly the Report Painter report,but still I could not get the data .
Please help me as where it went wrong in terms of Report Painter.
Regards
SuHi
Can be an issue with your Selection Period - Record Type or the Chars you enter in selection screen
Just execute the report with One CHar i.e. Comp code /.Period
You should be able to see the result.. Later on yuo can modify the report
br, Ajay M -
Selection screen control for a field in the report painter report
Hi,
Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
Your prompt reply will be really appreciated.
Thanks,
Ramesh.look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZNODEID'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = p_field
value = space
value_org = 'S'
display = 'F'
TABLES
value_tab = it_node
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
endform -
Adding gsber in selection screen of report painter
To gurus,
I have a small requirement, I have to get business area (GSBER) in selection screen of report.
I have developed the report using report painter FGI1 --FAGLFLEXT which is having gsber field.
In selection screen it self i want this GSBER FIELD .How to achieve it.
kindly guide me.
regards,
padmaja.Hi
What I understand from your question is you want bussiness area value on selection screen you can achive this by just using the by export/import parameter or by get/set parameter id.
Please elaborate what exactly you want.
Regards
Sagar. -
Validation on Date Field in tabular Report
Hi All,
I have manually created the Tabular report and in that I have TWO DATE field
1)Start Date
2)End Date
Now i want to put validation on start date as - Start Date Should Be More than sysdate.
and validation on End date as - End Date should be More taht Start Date.
How to put the validation ?Manish Jha wrote:
What is the error you are getting ? Try executing the process in SQL workshop with hard coded values of apex_application.g_f03 and debug the error.
Thanks,
Manish
>What is the error you are getting ? Try executing the process in SQL workshop with hard coded values of apex_application.g_f03 and debug the error.
Thanks,
Manish
Hi manish ,
I have Used the following code to validate end date should be more less than start date;
DECLARE
l_error VARCHAR2 (4000);
BEGIN
IF TO_DATE(apex_application.g_f05 (i), 'DD-MON-YYYY ') > TO_DATE (apex_application.g_f04 (i),'DD-MON-YYYY'
THEN
l_error :=l_error
|| '</br>'
|| 'Row '
|| i
||' ,TEST';
END IF;
END LOOP;
RETURN LTRIM (l_error, '</br>');
END;
it's giving the error like :
ORA-06550: line 16, column 6: PLS-00103: Encountered the symbol "RETURN" when expecting one of the following: begin function pragma procedure The symbol "begin was inserted before "RETURN" to continue. ORA-06550: line 16, column 24: PLS-00103: Encountered the symbol "BEGIN"
Error ERR-1024 Unable to run "function body returning text" validation.
What to change in the code?
Edited by: N.K on Jun 23, 2009 11:43 PM -
What's the simplest method of adding a date field in a form in DW(CS3)?
I'm creating a form that among other things has a date field where the user will need to input a date. I'd like to make it a standard date field where as soon as the user clicks on the field they get a pop-up of a mini calendar to select a date from. Anybody knows the simplest way to achieve this in DW? I should mention that I still use DW CS3. Possibly a known free widget of some sort?
I should add that if possible I'd like to make this a mandatory field - much like Spry Validation works with the common components of a form (e.g. text field or checkbox). Would that be possible to do if the code supplied for date field was external (as at seems DW doesn't have a date field feature internally)?Thanks again. There's one other thing I wanted to achieve here. I need the date format to be displayed like "dd/mm/yyyy" and not like it's doing by default at the moment (i.e. mm/dd/yyyy)
I don't have any knowledge of jQuery but had a go anyway at trying to fix this using this link http://api.jqueryui.com/datepicker/ as aid to try adjust my code. Obviously I couldn't get it to work so far... So I'm looking for a little bit of help from anyone who knows a bit of jQuery.
Here's the original default code (just the stuff that goes in the 'head' of the page):
<script>
$(function() {
$( "#datepicker" ).datepicker();
</script>
And here's what I tried adding to make it work:
<script>
$(function() {
$( "#datepicker" ).datepicker();
$.datepicker.formatDate( "dd/mm/yyyy" );
</script>
Obviously I tried other combinations including .parseDate instead of .formatDate etc etc none of which worked.
I'm wondering whether the extra code should perhaps go inside where the XXs are - $( "#datepicker" ).datepicker(XX)
Anyway, if somebody could help me out that would be great. Cheers! -
Make data selections obligatory in report painter
Hi,
Is it possible to make the selection parameters obligatory in report painter? If so, can anyone explain me how? Thanks!Hi,
Define a variant where you define the relevant fields as mandatory. Then, you have to create your transaction which will run this report, and in the attributes you define that this transaction should be run with a variant. The users should access to report with this Z-transaction.
Regards,
Eli
Maybe you are looking for
-
A Problem with the JavaScript Code can anybody help me
Hi every body, I prepared a html page using the following code, which i grab it from some web site, and used it in my web project, but the code that is not working and it is showing some javascript error, can anybody correct it for me please, the cod
-
Two headers for a report - page 1 first header rest all second header
Hi, I am having a requirement where i have to add a haeder1 for page 1 and header2 for rest of all the pages in a report. currently we are using Start body and end body tags in RTF. Is it possible to use Start body and end body two times, if yes step
-
Motion tween not working when tested
I have a situtation trying to get a motion tween to work. It woeks in the time framw when I hit play but when I go to test it does not work. I can send file if soemone can help.
-
Message driven bean example is not working
Hi, i tried message driven bean example on J2ee 6.20. I am able to make connection factory, but when i tried to deploy ear file a get an exception: Error occurred com.inqmy.services.deploy.container.DeploymentException: java.lang.NullPointerEx ceptio
-
Where is link to re-install original OSX Appleworks after a crash?
Hello, yes i am re-installing on my G3 iBook, i need the link to download the original program as the updater is only that. I had the program in my computer and have several music instruction books, designed using Appleworks. Can anyone please help w