How free field works in report painter
Hi,
Please provide me how free field works in report painter.
Thanks & Regards,
Radhakrishna.
Sorry, but this is not related to SAP on Oracle.
I would try ABAP forum instead.
Similar Messages
-
Selection screen fields order in report painter report..
hi experts,
i have a problem with selection screen fields order in report painter report.
Actually in report painter report selection screen order is different compare to report writer report selection screen.
how should i get the same selection screen fields order For Report painter report compare to Report Writer report ?
For example, Report Writer selection screen order is:
ledger:
company code:
period:
current fiscal year:
previous fiscal yer:
previous quarter end period:
where as Report Painter selection screen order is:
ledger:
previous fis year:
current fis year:
company code:
period:
previous quarter end period:
please help me regarding with this.
Thanks and Regards,
NAGARJUNA.hi nagarjun,
Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
Ex:
Selection fields No
Exclude Cancelled Lots 5
Material number 1
Plant 2
Material type 3
Inspection Lot Origin 4
Regards,
Lokesh -
Debit/Credit Shift not working with report painter
Dears,
We have defined debit/credit shift while defining financial
statement version. This functionality working well with F.01 however its not
working with report painter results. any help will be highly appreciated
Regards,
FRHi Dave,
I have gone back to the books (JP Terry's "Creating Dynamic Forms with Adobe LiveCycle Designer") and think we can improve on things...
var oFields = xfa.resolveNodes("ViolationsText[*].DebitVal"); // looks to resolve the repeating rows (I think)
var nNodesLength = oFields.length; // assigns the number of rows to a variable
var sumTotal = 0; // this is a temporary holding variable for the total, during the loop
for (var i = 0; i < nNodesLength; i++) // this loops through as previous example
if (oFields.ViolationsText[i].resolveNode("DebitVal").rawValue == "C")
sumTotal = "";
i = nNodesLength; // stops the loop
else
sumTotal += oFields.ViolationsText[i].resolveNode("DebitVal").rawValue;
this.rawValue = sumTotal;
This would go in the calculate event of your Total Debit Points field. I would be amazed if it worked first time. I haven't run through LC. Give it a lash!! (a try!!)
Good luck,
Niall -
Selection screen control for a field in the report painter report
Hi,
Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
Your prompt reply will be really appreciated.
Thanks,
Ramesh.look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZNODEID'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = p_field
value = space
value_org = 'S'
display = 'F'
TABLES
value_tab = it_node
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
endform -
How can I work with report columns in computation or validation?
Hi all,
I have an updateable report. Bevor submitting canges, I want to do computation or validation on one of the report columns. But a report column is not an item. Is there a possibility to work with report colums?
Thanks, DanielaHi Daniela,
Presumably, your tabular form has been created using the wizard?
If so, you might like to slightly change your SQL statement to allow you to access the "display only" columns in the collection.
When you have time, you should have a look at the HTMLDB_ITEM package api documentation as this explains how you can manually construct a tabular form. But for now, for the "display only" column, you need to do something like:
select
other fields,
HTMLDB_ITEM.DISPLAY_AND_SAVE(n,fieldname) columnheading
FROM table
where "n" is a column number - this will become G_F0n in the collection. You should ensure that you use a number that is not being used by an editable field - if you're not sure, do a View Source on a rendered page, and look for name="f01", name="f02" etc - these are the column numbers, pick one that isn't used for your new column.
The documentation says, for DISPLAY_AND_SAVE: "Use this function to display an item as text, but save its value to session state." so this sounds exactly what you need.
Regards
Andy -
How to Enter Text in Report Painter
Dear Sap Guru's
I am new to Report Painter i want to add some text under the lead column and then i want to choose Characteristics which i had done but i am not getting any option to simply insert some text under the Lead column in between the Rows.Example.
Lead Column Period1 Period2 Period3
Current Account
5149107 20,000 10,000 5,000
5149106 2000 3000 40000
PRofit Center Account
254136 4000 2000 1000
254137 3000 2000 5000
Please let me know how to Enter Text : Current Account and Profit Center Account in the Report.
Please send the reply as early as possible as i have to submit the report today.Thanks in advance.
Regards,
AbhishekSorry, but this is not related to SAP on Oracle.
I would try ABAP forum instead. -
How to copy code from Report Painter report?
Hi all,
I have a cost/commitment Report Painter report from Project Systems module. I need to include one more column with a field, Release indficator, from purchase order in the report. I am finding no way to do it through report painter and also am not able to copy the code of the exiting report painter report. Please advice.
Regards
Tapancheck the defination of that report in KE30 or thru menu path ?
Regards
Prabhu -
Adding a Date Field to a Report Painter
Hi,
Could someone please throw light on adding a date field (for example, scheduled finish date of network) to a report painter report? I don't think this field (or any date field for that matter) is available as a characteristic for report painter.Hi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra -
How to add another new report painter in existing T-code?
HI,
Can someone guide me, how to add a report painter report ZAL into a existing T-code?
My T-code contain 2 report, now i wish to add a new one. So when user execute this T-code, we can see these 3 report.
ThanksHi,
add the new report to the report group (T-code GR52) where the 2 already existing reports belong to.
In report painter you don't execute a report but always a report group including one or more reports.
Best regards, Christian -
How to use GR55 and Report Painter in SAP?
Thanks and regards,
SudhajibanDear,
Report Painter is a tool through which you can create your own reports
The T-Codes as GR51, GR52
and to execute the reports you have to you T-Code GR55.
Br,Vivek -
How to change order of report painter columns
I have a report which shows the columns in one order when in design mode in GRR2 but when the report runs, the columns display in a different order. When in design mode, you can see the actual output order by clicking the form overview button and selecting the columns tab.
I am trying to figure out how to set the column order, short of deleting all the columns and recreating them.
Does anyone know if there is an easy way to do this?
Thanks all!
BobDoug,
using MDC with SAP is ok. Try the following:
- Use SE14->Edit->Storage Parameter->For new creation and specify the ORGANIZIE BY DIMENSION clause.
- Go to the change-mode for the table in SE11. Switch to the 'Fields'-Tab and select the complete second line. Then click on 'Cut'.
- Now select the first line in the same way and click on 'Paste'. By doing so you moved the field at position 2 to position 1.
- Save the changes, click on 'Check' and, if that succeeds, click on 'Activate'.
Hope that helps.
Regards,
Johannes -
How to Modify the Selection Screen in Report Painter
Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
umaHello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju -
How to add Custom code in Report Painter
Hi All,
I have a requirement to add Authorization checks at Profit Center Level for 8A-PCA001G report. This is the first time am working on Report Painter/Writer. I am wondering whether i can add custom code or not. Please suggest me how to do this. I copied 8A-PCA001G into a zreport but did not find anywhere to add custom code.
Any help would be really appreciated.
Thanks,
KumarHi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM -
Report Painter Library: troubles with new field in the additional structure
Hi, ALL!
I'm creating a new field in the Report Painter table GLFUNCT. Do do it I created my field in the additional structure GLDBZ for GLFUNCT and create an row in the T804C table for new field.
Who has expirience in customizing using T804* tables? What tables should be used and how? I have the following troubles:
- I do not see the new field as characteristic in the library - I don't know the customizing table to set fields from additional structure as characteristic
- in the generated Report Painter program my new field exists but call of filler routine is always disabled
Thanks
TatianaHi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan -
How to make smartform get data from report painter???
hi all!
please tell me how to get data from report painter?
i has a report painter zabc ( create through t-code ke31).
I want get data from Zabc after run and show data by smartform.
plz help me!
thanksHi ,
Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Regards,
Smart
Maybe you are looking for
-
I am trying to use my maps GPS but my phone keeps telling me I'm in Russia when in fact I'm in UAE ( So's the phone ) How do I get it to recognise the place it's living.
-
BI Scheduler configuration after install
Hi, I am new to OBIEE 11g. I need to configure the Scheduler in a UAT environment in which all the services are already running for a while now, going thru the Oracle docs they say you need to do the scheduler using the RCU, and i believe RCU is done
-
Cannot start the managed servers because of this error.
Hi, I installed weblogic 10.3.6 and created admin and managed servers and node manager. I am able to startup and shutdown the admin and managed servers using the node managers but when i try to start/shutdown the managed servers from the command prom
-
[Solved Alternatively] VirtualBox + AwesomeWM. Capturing my Mod4 key?
Hey guys, I'm using the Awesome WM with my modkey set to Mod4 (super, the windows logo). When in virtualbox Windows captures the key event, making it hard to switch between windows in arch. I saw this guys blog post, but his suggestion of disabling t
-
BAPI_INTERNALORDRGRP_CREATE
Hello Experts, I have to create lots of internal order group using KOH1, But problem is i cannot create BDC for this KOh1, i read that there is a BAPI name BAPI_INTERNALORDRGRP_CREATE, I want to know how to use this BAPI, Is there any body Can guide