Adding a Subscriber

We are currently running CallManager version 7.0.2 with one publisher and two subscribers. Trying to add another subscriber. The server and software has been installed, we can see it in CallManager System --> Server and System --> Cisco Unified CM.but have not yet added the new server to any Cisco Unified CM Group. When we look at the Database Summary the replication status all nodes show a status of 2 except for the new server which shows a status of 4.
Do we just need to add the new server to our Cisco Unified CM Group?
If we add the new server to our Cisco Unified CM Group and there is an issue with the new server, will it "hurt" anything?
Can we just delete it if there is an issue?

Simplest way to check the health of the cluster is to go to the CUCM webportal>CUCM reporting.
and go to Unified CM Data Base status. it gives you the replication status of each member.
DB replication issues are notoriously hard to fix though, you might want to consider raising the issue with TAC if you are not confident enough.

Similar Messages

Cisco best practice design recommendation for adding a subscriber?

Hello all,
We have UC Manager 7.1(3) running on a publisher and subscriber that is serving as the central voip to five (soon to be six) offices. At what point does cisco recommend an additional subscriber be added to a cluster for call processing and load balancing? I have been tearing through cisco's website and I am not finding this info. I am sure it is there, just buried!
Any feedback and links to the doc would be a huge help.
Thank you.
Rgds,
Vicky

Vicky,
The answer you are looking for depends on a few things. The most basic are:
1) What hardware are you running? This will determine the maximum number of phones that can be registered to any one server.
2) The answer to the first question comes into play as you total up how many phones you need to accommodate throughout the entire cluster. In addition, you want to provide adequate redundancy as well. Right now, you have a 1:1 model (Sub should be primary call processing agent but can failover to Publisher). As your cluster expands, you may need to consider a 2:1 model (2 active Subs, 1 backup) or continue with a 1:1 model.
3) If your cluster has 1000+ phones, you need to look into going with a Pub, 2 Subs, and a dedicated TFTP server.
Without getting too far into the weeds, take a look here first: http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/srnd/7x/c7ccmsrv.pdf
Then, if you have additional questions - please ask!
Hailey
Please rate helpful posts!

Added another subscriber to existing publication. Snapshot delivered but ket re-initializing if Distribution agent is restarted

Hi,
Here is the situation. We have existing replication with sql 2008 r2 publisher and a subscriber on same edition. The database is quite big so snapshot generally takes about 4 hours or more. There are additional tables on subscriber so a backup / restore
mode of initialization is not suitable.
This replication is working just fine, now there is a need to add a sql 2014 subscriber to this publisher and same tables as in current publication, so we decided to simply add another push subscription for this new sql 2014 subscriber. During the process
the Initial snapshot is generated and applied to new 2014 subscribe, keep in mind we have not made any change to publication to avoid affecting the existing subscriber. So when snapshot is delivered and appeared in replication monitor it started creating primary
keys on subscriber database. We have few big tables where we are not sending clustered and non clustered indexes across so that replication snapshot goes fast (although it is over 4 hours). These indexes and primary keys get created with manual scripts after
snapshot is generated. During this time log reader agent has been actively sending transactions to existing subscriber that is telling me that as soon as distribution agent done with the snapshot it will start sending transactions to new subscriber (which
is quite normal). Now the problem, after snapshot is done I need to run manual scripts to create PK and indexes on new subscriber, to do that I have to stop distribution agent so that indexes and PKs don't get blocked. After I stopped distrib
agent temporarily, the Scripts got completed successfully within 20 minutes and when I re-started distribution agent , to my surprise it started initializing the new subscriber again and sending same snapshot that was already applied. It make me puzzled
what caused the distribution agent to reinitialize although it already delivered snapshot and I have indexes created and ready to go. I tried this process again with more careful approach and gave about one hour after snapshot delivered message received. but
it did the same thing. Only explanation I can think of that publisher database is actively sending transactions when I was applying snapshot and as soon as it is delivered, the distribution agent started delivering transaction, I could see Undistributed
Commands kept on growing high telling me that there are lots of transactions for new subscriber to catch up but without indexes and some missing primary keys it would not even catch up and so I always stop the distrib agent and run my scripts on subscriber
and run into this situation. During all these times the existing subscriber never had any issue.
Do I need to make sure no ort minimal transactions happening on publisher when I initialize the new subscriber.
Or should I create new separate publication on the same publisher and use that.
Any other suggestions are welcome
Thanks!
dba60

Snapshot was set of initialize immediately. No errors in repl_errors table. Distribution agent was using default profile.
Do you think that I should be running missing PK and indexing scripts as part of replication, replication provides an option run scripts before or after snapshot was applied. Also, I am wondering if creating some missing PKs is triggering the snapshot to
be reapplied. Also, Why the primary key for some tables not coming along during snapshot delivery?
Do you think having lots of transactions on publisher database while snapshot being applied would be affecting it too?
Also, is it possible to use a different distributors for each publication from same publisher?
My plan now is to create new publication for same publisher and database, this way I will have more control over changing article properties.
Thanks!
dba60

Adding a "subscribe button" with using .mac

Is this possible, I am currently using iWeb enhancer for comments and such, but I would really like to include a subscribe button for my friends and family

explain the URL, what would I be entering?
Whatever your personal url is, like http://www.myname.com
This goes in the box that comes up if you publish to a folder. The only purpose of that box is to make your RSS feed work.
Do I need
to set-up a RSS feed with someone else?
No.

Unity problems on adding new subscriber

Dear sir,
Following is the error mesage snapshot from Unity. The system encounter
this message when removed voicemail box (32530) and try to add it back. We find subscriber based on the alias (extension
number)but there is no record in the system. The unity version 4.0(4)Maybe the mailbox could be hiding somewhere and not synchronize with the system. You have any idea?
thanks.

what is the error message?
you cannot simply remove a voice mail subscriber and add them back with the same alias.
when you only delete the subscriber from unity, the alias still exists in AD and either must be removed before recreating the new subscriber or a new alias must be used.
a good way to remove all pieces of a unity subscriber, including the AD alias, is to use the AD exchange tasks or manually delete the AD alias, unity subscriber and exchange mailbox.
please see the following link for more info deleting subscriber accounts and the impact on exchange 5.5 vs exch 2000/AD:
http://cisco.com/en/US/products/sw/voicesw/ps2237/products_administration_guide_chapter09186a008022c917.html

Unity problems with adding new subscriber

Dear sir,
Following is the error mesage snapshot from Unity. The system encounter
this message when removed voicemail box (32530) and try to add it back. We find subscriber based on the alias (extension
number)but there is no record in the system. The unity version 4.0(4)Maybe the mailbox could be hiding somewhere and not synchronize with the system. You have any idea?
thanks.

It is related to AD.
Here is what you did:
You probably deleted the Unity Subscriber from SA. Then you clicked the "ADD" new subscriber, and tried to create a new Unity Subribers AND AD account with the same Exchange Alias.
You will need to do the following:
Click Add to add new subscriber
Select Import (instead of new)
Find your old users you deleted from Unity
Activate subscriber.
There is a different in Unity SA when you delete. It only deletes the Unity AD attributes from the AD user/Exchange box. It does not remove the AD account/exchange box.
hope this helps

Adding to subscribed calendars/Posting titles without notes

Okay, so my hubbie and I both use iCal religiously and subscribe to each others calendars but there is a kink. I have a calendar called "Rob" (his name obviously) and I regularly add things like dr's appointments for him to it, he subscribes to it but cannot add things to it for instance work meetings that I need to know about. So he too has a "Rob" calendar that I subscribe to. Its getting ridiculous having two versions of the same calendar. Why cant you add to a subscribed calendar? Logically you would think we could have one "Rob" calendar among us and the other person be able to add to it. I have this same problem with employees who cant add vacation requests to the work calender. And further more, on the topic of work calendars, why cant you publish titles without notes? UGH!
I would love advice on how to make these things happen.

Have you considered having your husband "own" the "Rob" calendar and you own one named "Susan" (substitute real name here, of course). Both of you subscribe to the other's calendar so that all events, appointments, etc appear on both your computers. Unless there is a problem with you entering his appointments on your calendar, that should take care of your "syncing" issue.
As for your employees, I don't know for sure if you can do this, but how about a calendar in a public account that they can all log into as "Jane Smith" or "John Public" - whatever the username is on the account - and then make requests there. Publish that calendar the then you and/or your husband could supposedly see all of that as well. You can use the check box next to that calendar's name to show/hide it so it doesn't clutter up the rest of your calendar. As I said, I don't know if that will either work or solve your problem - just thought I'd throw it out there.
And I'm trying to find some solution to the titles-without-notes matter too. Some of my notes are six or eight paragraphs or more long, and today I just need a list of events and not all that other supporting info. I'm hoping that there's some third-party utility out there that can do this - I'll let you know if I find anything.

Doubts in Adding a subscriber

Hi,
I ran the following code snippet.
AQSession aq_sess;
/* After getting the appropriate Session */
queue = aq_sess.getQueue("aq_user", "sampleQ");//SampleQ queue exists in aq_user user
AQAgent agent = new AQAgent("subscriber1","sampleQ");
queue.addSubscriber(agent,"subscriber1");
and ended up getting these stacktraces
Exception in thread "main" oracle.AQ.AQOracleSQLException: ORA-00604: error occu
rred at recursive SQL level 1
ORA-00920: invalid relational operator
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 3387
ORA-06512: at "SYS.DBMS_AQADM", line 295
ORA-06512: at line 1
If someone can help me out
Regards
Saumya

The second argument to the addSubscriber call is the rule (SQL expression) on the basis of which you want to filter messages.
Change the call as follows:
queue.addSubscriber(agent, null);
If you want a specific rule - the syntax should be a SQL expression eg:
queue.addSubscriber(agent,"corrid='abc'");
null

Error while adding subscriber in UNITY

While adding the Subscriber, it shows the below error eventhough all the domain rights and permissions has been added.
Error fetching MailStore list (for server ECAE-MSG-SRV).
hr=0x8004010F (0x8004010f)
Check that the AVDSGlobalCatalog is registered and running.
Please see your Cisco Unity system administrator for more details

Hi,
We'll need some more details.
What version of Unity?
What version of Exchange?
Is this a new installation?
Has this ever worked?
Has the Unity server hostname been changed since Unity was installed?
Did you recently change anything on the Exchange side?
1. Double check that the permissions for UnityDirSvc have been correctly delegated exactly according to
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelpExchange_ENU.htm Giving it too many permissions can break things. You may need to force a DC/GC reconnect and make sure that Unity is able to talk to the GC properly (view the event logs to make sure), otherwise finding the Exchange server will never work.
2. You can also verify the below, however ***Do this at your own risk, it involves manual database modification that could compromise Unity if done improperly***
Stop Unity
Go to the SQL Server Enterprise Manager,
Open Microsoft SQL Servers
            - SQL Server Group
              - (Local) (Windows NT)
               - Databases
                - Unity Db
                   Tables
                    Right-click on 'MailboxStore'
                     Select Open Tables > Return All Rows
Arrow over to the 'HomeServer' field and verify if this partner mail server is correct. If not, this needs to be changed.
Restart the Unity server
Hope that helps,
Brad

MSS Team Viewer: WDPortalEventing.subscribe in custom iView does not work.

Dear all,
we are trying to integrate a custom Web Dynpro Java iView into the MSS environment. This iView should receive the portal event "selection_changed" as described in SAP note 1112733. Which does not happen. I have followed the description within the note and done the following:
- In WdDoInit() added: WDPortalEventing.subscribe("urn:com.sap.mss.employeesearch", "selection_changed", wdThis.wdGetGetEmployeeQualificationsAction());
- implemented action "onActionGetEmployeeQualifications(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String dataObject, java.lang.String Namespace, java.lang.String Name )"
- created WD Java iView and added it to a new portal page which also contains the employee profile page
The result is: the action method never gets called. What am I missing here?
Any input on this topic would be greatly appreciated!
Kind regards,
Helga

Hi Kim,
I have recently worked in one such developement work related with MSS iView. Please see following link:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/how-toaddacustomWebDynproiViewtotheMSSEmployeeProfile%2528ECC+6.0%2529
https://wiki.sdn.sap.com/wiki/display/profile/HowtoreadinformationfromtheteamviewerinWeb+Dynpro
Using these links, you can create one WD Appl. In the application, when you will click on a particular employee, the employee no will be selected.
Once you are able to select the employee, you can play with it and execute other BAPIs.
Hope this will suffice.
I have used above links and created the WD Appl.
Regards,
Gary

Subscriber cannot see my shared photo stream! Why?

I have just created a shared photo stream and added a subscriber. They were notified by email, but when they clicked on the link, it told them that "This photo stream is no longer shared". It is still shared and I can access it!

Hey StuDobson!
Here is an article for you that can help you troubleshoot this issue:
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams
http://support.apple.com/kb/ts4379
These steps will probably be the most relevant troubleshooting for the issue you are experiencing:
I've sent email invitations to my shared stream, but not everyone received one.
Try these troubleshooting steps:
Ask the person you're inviting to check any junk or spam email folders for the invitation.
Try resending the invitation. If a recipient still doesn't get the invitation, send it to a second or alternate email address for that person. The recipient's mailbox may be full, or either the person or the email service provider may have a filter that is preventing the email from being delivered. If you are using iOS 7, you can also send the invitation to the phone number that the recipient uses for iMessages.
If the person has received an invitation at least once in the past, that person may have opted to unsubscribe from future iCloud Photo Sharing emails. See the section on opting out of emails, below, for more details.
If none of these steps resolve the issue, contact Apple Support for further assistance.
Thanks for using the Apple Support Communities!
Cheers,
Braden

MGW: How to configure subscriber to try reconnect more than 16 time?

In MGW we have registered a WMQ foreign queue and added a subscriber and a propagation schedule for INBOUND_PROAGATION. In general, everything seems to be working fine. We do successfully get messages from WMQ.
However, admins restart WMQ every night. So, every morning when we come in we see this in the view MGW_SUBSCRIBERS:
SUBSCRIBER_ID = SUB_WMQ2AQ_EFLDRTRANS
FAILURES = 16
LAST_ERROR_DATE = [today]
LAST_ERROR_TIME = [around 5:20 AM]
LAST_ERROR_MSG = MQSeries queue manager, MV17WA01, creation failed errorcode = 800
We have found that if WMQ is restarted fast enough, before the subscriber fails 16 times, everything works fine again. Also, we have found that after 16 failures, all we have to do is reset the subscriber and everything works fine again.
So, question: How can we configure the subscriber so that it tries to reconnect more than 16 times?
TIA. ASD
Edited by: user11135387 on Apr 1, 2011 5:17 AM

hi,
Suppose my form contains the following fields as:
Project,Category,Start Time,End Time,Task Assigned,Task Description
and I want to apply databank values for these fields
Steps which i do are as follows.
1. First of all i Configure the databank file as:
Project,Category,Start Time,End Time,Task Assigned,Task Description
and the values pass are :
Orgnization Process,General,13: 00,14 : 00,test1,test2(in the first row)
NMDGF,General,14:00,15:00,test3,test4(in the second row).
2. After configuring the databank file i have to link with Script node. But since there are more than one fields so how i can link the csv file with script node?
as for the single variable script node , i just substitute the value and link with the databank file its work perfectly fine and it add the folowing code in java code
getDatabank("Timesheet Project").getNextDatabankRecord(); in the starting of run function
3. So i have to add custom code for fetching the value for the next field? As I am not so gud in Java Code so what wil be the code to fetch the values for the next field from CSV file

CUCM 8.6.2 to 10 Upgrade

Hi everyone,
Didn't have the following situation so far, so need advice:
I have an upgrade on the way, from CUCM 8.6.2 to CUCM 10, and that's fine,
But client needs to expand the cluster, by adding additional subscriber nodes.
Do I go with upgrade first, and then add more subscribers, afterwards?
or
Do I add subscribers first, and then do an upgrade?
Regards
Vladimir

Hi Aman,
Thank you for your prompt response!
Can you give me the reason, why would you go with adding first, migrate later?
Since it doubles the effort. Is there any particular reason for the choice?
I personally would go with migration first, and add subs afterwards...
Are there any cons with my option?
Thank you again!
V

9971 SIP Phones at remote location status REJECTED

Hi,
I have 10 locations, Site 1, 2, ....10. All these locations have 10 phones each. These phone are configured with default SIP Profile. Were registered and working fine. While adding a subscriber I downgraded the cluster. After bringing back to regular version. I find all my phones status shows unknown.
I tried to change dhcp option 150 on dhcp router to point different server and reconfigured with the correct tftp ip address. Also I tried to shutdown the interface where phones are connected and bring it back up. Restarted tftp server many times. Even after all these I find my phones in REJECTED state.
I know personal reset on each phone will fix this issue. But is there any other way to fix this, since these phones are at remote locations.
Any help is appreciated.
Thanks,
MR

Hello!
I think, that the most possible issue is problem with CTL/ITL.
Certificates were regenerated while downgrading/upgrading and were not propagated to the phones.
So u should try to delete ITL on the phones.
Regards,
Kirill

Event based scheduler job - 2 events at the same time only 1 run

Hi,
i converted our dbms_job - jobs to the newer package dbms_scheduler.
It is a 10.2.0.4 patch 23(8609347) database on an windows server 2003 R2 Enterprise x64 Edition SP2.
The Jobs(about 130) are nothing special ... only some statistics, matview-refreshes and so on.
For the notification of failed jobs and jobs which run over the max_run_duration i downloaded and installed the job notification package.
The jobs are assigned to different departments and the corresponding developer teams in our company.
I created a notification job for each department and if a job fails we (the database administrators) and the corresponding deverlopers will be informed.
Now i ascertained that only 1 email will be send if 2 jobs of the same department fails at the same time.
The emailer-jobs are auto-generated by the job notification package. I only modified them to look after all jobs of special department and not only after one job. (--> event_condition ... object_name LIKE 'XXX%')
example for dba-jobs(copy of the script output of TOAD):
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'DBA_JOBS_EMAILER'
      ,start_date      => NULL
      ,event_condition => tab.user_data.object_name LIKE ''DBA%'' AND tab.user_data.event_type in (''JOB_FAILED'',''JOB_OVER_MAX_DUR'')'
      ,queue_spec      => 'SYS.SCHEDULER$_EVENT_QUEUE, JOB_FAILED_AGENT'
      ,end_date        => NULL
      ,program_name    => 'SYS.EMAIL_NOTIFICATION_PROGRAM'
      ,comments        => 'Auto-generated job to send email alerts for jobs "DBA%"'
    );I thought that a queue is used to manage all events from the scheduler jobs. So i made a test with 2 dba jobs and simulated a failure at the same time but i received only one mail.
So what is happend with the second event? I looked for the events in the qtab(SCHEDULER$_EVENT_QTAB) which belongs to the event queue(SYS.SCHEDULER$_EVENT_QUEUE) and no event was missing.
So i think the emailer job has to run 2 times.
Is anyone able to explain or to find my mistake?
I know that the easiest way is to create one emailer job for each normal job but i think this is a little bit costly because all the arguments are the same for one department.
Thanks & Regards

Thanks for your fast answer.
You are right with the "enabled => TRUE;" part and i only forgot to post it.
So the Job is enabled (otherwise it would not send any mail). Because it is sending one mail i think it is also not necessary to hand over a job_type.
Additionally the job starts a program ... so it is right to set the job_type='STORED_PROCEDURE' isn't it?
And also right ... i already added the agent as subscriber to the queue.
Anyway i think the whole thing do what it have to do. So in my oppinion there are no big mistakes in creating the job or at adding the subscriber.
There are also no problem in raising the events by itself and enqueue them in the scheduler event queue.
There is only a problem when 2 jobs fails (or run out ouf max duration) at exactly the same time.
If i understand it right:
The agent/subscriber will find the "JOB_FAILED"-event for the first Job in the queue and starts the emailer Job.
The agent will also find the "JOB_FAILED"-event for the second Job and wants to start the emailer Job again.
I don't know if this is really the problem but perhaps the emailer-job can not be started in consequence of the second event because ist is already running.
I also don't know if this is a mistake of the agent or of the emailer-job by itself.
I only want that it runs two times (one run for each event). I my case it also doesn't matter which email is send at first.

Adding a Subscriber

Similar Messages

Maybe you are looking for