Adding a Taluka field in Address Infotype

Dear experts,
I have to add a "Taluka" field to the Addresses infotype for PA30 according to user requirement.
Please guide me the steps to do the same. I am new to enhancements.
Regards,
Sumit

Hi,
I searched thorughly prior to this, but did not get a relevant thread.
According to your suggestion, I tried PM01. Please pardon if it's a silly question, but is there any support or licensing issue if I add a custom field to standard SAP screen?
Can anyone please give me the steps to do it?
Reagrds,
Sumit

Similar Messages

Enhancement Adding a new field to a infotype

We are implementing E-Recruiting and trying to a new field to a existing infotype 5107. On the E-Recruiting page there are three frield that already exist. Country, State and City these field also in infotype 5107 too. Country and State both are dropdown box. I have to set the default value for Country to 'USA' and State to 'AZ' where can i set this? The new field will display location "county" which the user will be able to select multiple locations. I know i would have to go PM01 to add the new field to the infotype 5107. But i'm missing the third that will allow me to do this. There's IT, IT Version, IT (i don't have this on my SAP Gui). I'm not sure what to do next after I created this new field. how can put this new field this the E-recruiting webpage?

Matthew,
You can enhance your infotype 5107 from tcode 'PPCI' not 'PM01'.
Check out this Custom Infotype Creation in ORG Management
Regards,
Ahmad

Adding few new fields to Custom infotype already developed

Hi
I have a requirement to add new fields to already available custom infotype. I have to edit the PS structure and add few fields there and activate it. My question is, when I tick on "Generate Objects" after maintaining the PS structure, it will show pop up boxes asking whether to overwrite those objects already exists, shall I tick it or exit? Because the code is already written in the module pool for some validations,if I regenerate the objects, will the complete code will be erased?
Please guide me in this regard.
Thanks,
Pallavi.

Hi,
Yes you need to regenerate objects, for changes to reflect.
Since the objects are regenrated, the custom validation codes should get overwritten.
To be on safe side, you can copy this infotype to a dummy infotype and regenerate the code and check.

Addition of new fields to existing Infotype: Error in Quality Server.

Hi Experts,
I have added new fields by adding custom include to Infotype 4000 using t-Code PM01. It is working perfectly fine in DEV. But, in QLT, the custom Include is not attached to the P4000 structure. Independently, CI_P4000 exists in QLT.
I have checked all the Transport Requests, nothing is missing. However, The structure of P4000 is not getting modified as per requirement. What should I do?

Hi Experts,
The Error was coming with Infotype 4000. I tried adding the same field by updating Infotype 4001 and it worked. So, I have used that only, and my requirement is fulfilled.
But, I am still not sure if we can add field in similar way in Infotype 4000.
Thanks to all for providing me with possible solutions!!
Regards,
Shruti Gupta.

"500 internal server error" after adding custom fields to Address page

I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
we also extended the Badi HRPAD00INFTYUI
custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
we get the following error:
"500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
"Area8" is one of the custom fields we added in PA0006 (Address infotype).
any idea what is wrong? maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
T.

Hi Sasu,
Its clearly saying contect binding error. Have you mapped correctly from FcComponent to VcComponents.
FcCompoenets for Model logic.
Check the mappings correctly.
If it is complete custom or new field then there will be could of steps.
1) Reimport the model
2) map new field to FcComponent
3) Bind new Fields from Fc to Vc
Rgds
-SS

Adding Standard Infotype fields to Custom Infotype

Hi,
I have a Requirement where I've created a Custom Infotype. Now, client needs to add Standard KOSTL and Email Address fileds to it. Whenever, someone tries to create / change this Custom Infotype for any Employee, the Pernr's KOSTL and Email Address should get populated automatically as in Standard Infotypes 0001 and 0105.
Please guide me, how to achieve this functionality.
Regards,
Hems.

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY

Hi All,
We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
Kindly suggest a solution.
Full points will be rewarded.
Thanks in Advance
Kumar

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Adding a text field in a custom infotype

Hi,
I have a custom infotype which deals with sickness data of the employee
My requirement is that the user will enter an explaianation for his sickness...etc. Thus I need to incorporate a text field in my infotype.
What I am planning is to give a button on the screen of infotype, so when user clicks it a text editor will open and and he can insert or update his sickness text data.
Please tell me how do i do that and also if there is any alternate better approach.
Regards,
Neha

you need to make a custom container on which you have to put editor
use class cl_gui_custom_container, cl_gui_text_editor, first define instances in top include then create objects. if you want this to be done when you click on any button then put this coding in the function code of that button.
aditya

Adding field from Custom Infotype in Screen Header-PA30

Hi all,
Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
Please guide.
Thanks in advance.

Hi,
When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
Hope this helps.
Donnie

Adding Images To Note Field In Address Book

Hello chaps,
I'd like to be able to take a screengrab from streetmap and bung this into the notes field of Address Book so that I have a handy map of where my contact is whether I'm online or off. Anyone know of a way to do this?

So far as I am aware, the notes field will only accommodate text. However, you could consider using the URL field for a reference to a file containing the map data, such as:
file:///Users/username/Documents/Maps/picture%201.png

Adding a custom field in a sap standard screen in pa30 for an infotype.

Hi to all..
i'm in a requirement to add a custom field in a standard screen of pa30. for the infotype 0442.
I googled up.. but i was not getting proper solution for it.. can any one provide a solution for it..
With regards.
Aahbha.

Hello Sirs,
Step by step instructions on:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4f/d52552575e11d189270000e8322f96/frameset.htm
The below thread provide more info on how to create an infotype from scratch, but this is just for the reference:
add custom fields to standard infotype
Regards,
Bentow.

Modify SAP standard fields in an Infotype

Hi friends!
We have enhanced an Infotype successfully added few extra fields and they work perfectly.
In Infotype 28, there are already 3 SAP standard fields and we have added 4 more.
Now, we need to enable/disable according to the our added fields. For Eg by a Custom check box, I need to enable/disable SAP standard field for an infotype.
We tried by LOOP at SCREEN and all but due to SAP standard fields we are unable to do it.
Any ideas?
Please help.
Thanks.

Hi Park,
Standard Infotype Fields configured (enable/disabled/hidden) in the view V_T588M (Tcode-SM30). You can disable any standard infotype field here if it is independent of other fields (i.e. before screen opens itself field is disabled).
If you want the field to be disable at runtime you may need to edit the feature 'PNNNN' (where NNNN is your standard infotype number (transaction -pe03)).
Also have you tried to code (loop at screen. endloop) in badi HRPAD00INFTY (method BEFORE_OUTPUT). I am not sure whether this will work or not.
Regards,
Shrinivas

Adding a new field and new data item breaks layout

I am adding a new field to a subform and populating it form a .Dat unfortunatly adding this field is causing data outputed to the subform below it to shift down one line on the page when outputted.
This new field is outputted at the top of the form and and the line being shifted are below this.
Below is the field details and the field as it is in the .dat file.
Field:F_PO_NUMBER [1]
Lines: 1 Characters: 20 Angle: 0
In Subform
: Main_Page
Options
: Global
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^FIELD F_PO_NUMBER
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^GLOBAL F_TRX_TYPE
Invoice
Now the weird party is if I move the new field in the .dat as below it fixes things and the everything lines up like it should do.
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^FIELD F_PO_NUMBER
^GLOBAL F_TRX_TYPE
Invoice
^FIELD F_TRX_NUMBER
I hoping someone might have an idea of why this is the case as I'm at a loss regarding why its happening.

I may not hit on it exactly, but this sounds like Adobe's processing order.
It wants to process the fields in the order they are in the DAT file.
I have a similar problem with an overflow field, that isnt last in the DAT file,
Read this here:
http://forums.adobe.com/message/2298283#2298283
Now that may not be exactly your issue, but I think its the same inherent problem,
Adobes processing order for the fields/subforms.
I am still trying to resolve my issue, but found the ^field command in the reference manual (Print Agent),
and am wondering if I can use it.

Adding a Taluka field in Address Infotype

Similar Messages

Maybe you are looking for