Adding attributes in the selection screen

Hi Experts,
I had enhaced Account assign group field in the data source 0material_attr.Replicated and data is loaded .
It is reflecting in the query also.
Now i need to bring this attribute in the selection screen.
Can anyone tell me how to bring this attribute in the selection screen..
Ganesh

Hi Ganesh.
The communication structure of a characteristic is based on the characteristic structure/attributes. So to add anything to the comm.str. you have to do this in the maintenance of the characteristic as you did.
However it is not enough just to add it to the detail/navigational attributes tab. You have to turn the attribute navigational by pressing the navigational attribute on/off button!
Do you use 0MATERIAL directly as an infoprovider to the query? If not you will have to choose the AAG as navigational again in the infoprovider maintenance!
Now drag and drop the AAG in the query designer (you will see the navigational attributes as a normal characteristic - propably with tech.name 0MATERIAL__ZAAG). Now right click and choose "restrict" -> variables tab -> right click -> new variable -> create the variable -> add it to the selection and you are done.
Hope it helps - and don't forget that assigning points are the way to say thank you in SDN.
BR
Stefan

Similar Messages

  • How to include Navigational attribute in the selection screen

    Hello All,
    Can any body please tell me how to include a navigational attribute in the selection screen in BEX?

    Let´s go step by step.
    In your example, you mentioned the characteristic called 0MAT_PLANT.  Its navegational attributes are allocated in the same dimension the main characteristic belongs.  So 0MRP_CONTRL, as a navegational attr. must be allocated in the same dimension as 0MAT_PLANT.
    1) In query designer in Bex (left pane) find the dimension where 0MAT_PLANT is allocated.  Find the navegational attr. in the same dimension, 0MRP_CONTRL.  Pls verify you are looking to a navegational attribute, activate technical names and the name of the attr must be 0MAT_PLANT__0MRP_CONTRL.
    2) Below the attribut (still left pane) you will find a Variable icon (yellow).  If you see the "+" symbol, it means that at least one variable exists (standar or not).  Open it and check if the variable suits your requeriment to set it in selection screen.  If not, create a new one (let me know if you need help with this task).
    3) Once you have your variable for the navegational attribute, drag and drop it to the design area (row, column, filter).
    4) Verify the order you want this variable to appear from the menu bar: Query properties -> Sequence of Entry Variables.
    Hope this helps.  Leticia
    Edited by: Leticia Laura Locatelli on Oct 1, 2008 10:41 PM

  • Adding fields to the selection screen of IW38

    We have added some fields to the CI_AUFK include, they have also been added to the RIHAUFK_LIST structure. Currently the new fields appear in the ALV when the report is run.
    What I need to do is add them to the selection screen.
    Has anyone done this? I have been looking for a user exit etc, no luck.
    Thanks, Mike

    Why not use the new enhancement framework?
    Goto the main program in SE38 and click on the Enhance button - spiral icon (Shift+F4) and try to add new selections at the appropriate by implementing the appropriate enhancement.
    I am sure you can achieve it using enhancement spots.
    cheers,
    Aabhas

  • Adding field in the selection-screen of a zprogram

    hi gurus,
    i have to add field in the selection-screen of oppurtunities. in database i have a field salesvalues, some of oppurtunity guids have this field value. first i need to add in selection-screen in this alv report. and fetch the data from ztable into required field . if the input fields of the salesvalues field id filled, then filter the global  guids(from global table which had the guid values already) with this guids related to salesvalues. and if one single guid mathes to 2 values of salesvalues then concatenate 2 values with comma and display in single field. if select-options are blank then fetch all opportunity guids which have salesvalues. pls give solution.

    Hi Srini,
    Thanks for your Reply
    I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
    But still that field is not visible in the dynamic selection screen.
    Thanks
    Ajay.D

  • Adding Container in the selection screen

    Hi ,
    I have a special requirement,  I need to place a
    long text editor in the selection screen. can any one explain it. this requirement is in HR report  including PNP Logical database.
    is it possible to add the Long text container ?
    Thanks In Advance.
    With Best Regards
    Nag

    I resloved the issue ..
    Thanks
    Nags

  • Nav. Attribute in the Selection Screen of the Report

    Hi Experts,
    I'm maintaining a master data (Emp. No) with the nav. attributes (Emp.Name, Address, City, State, Zone)
    I want to view the detail report based on Zone.
    This zone I want to bring selection screen.
    I'm unable to create a selection variable for Zone.
    Can anyone please tell me whether it is possible. If yes please advice me.
    Thanks

    Hi All,
    The data provider is Infoset. And all the attributes are coming under the Navigation Folder once I drop the Emp.No in the dimension.
    And in the Query Designer all the attributes are coming under the Emp. No. but when i create a variable, it is only possible for Emp.No. but not possible for its attributes.
    If I can be able to create, can anyone please share me any documents to create the variable for the Zone.
    Thanks

  • Attribute of the Master Table in the Selection screen

    Hi Experts,
    I'm maintaining a Material Master table with all these attributes
    MATERIAL CODE -
    Material Description
    Material Group
    Material Price
    Material Type
    In my transaction table only the material code is loaded along with the other transactions and the material group, price or description is viewed in report as I'm maintaining the master.
    If I want to view only the Group G1in the report. Can I bring this group in the selection screen to view only those details of the transation belong to the respective group?
    Since I'm maintaining the group in master table. Will the selection variable consider the attribute of the Transaction Field (Material)?
    I'm not very sure whether it is possible.
    Can anyone please adive me.
    Thanks

    HI,
    IF you want to view the report based Material Group with out the MATERIAL CODE
    then you want to make the Material group as navigational attribute.
    Regards,
    Sankar Reddy

  • SQ01 - Adding a field to the Selection Screen

    Hi All,
    I need to add a new Selection Criteria in the Selection Screen for an existing SQ01 Query.
    Please advise the procedure to do the same.
    Regards,
    RR

    Hi,
    You have marked this thread as being answered, however, neither of your questions has been specifically addressed in the answers provided. 
    You can make any field from any infotype a selection field in SQ01.  First, in Settings --> Settings uncheck the Graphical Query Painter.  Enter the query and use the yellow arrows to the right to reach the Selection screen.  Here, any field in your query can be checked to become a selection field.  If the Graphical Query Painter is checked, go to your query.  On the left you have your infotypes and fields.  Checking the right hand box will make any field in your query a selection field. 
    For your second question, if you create your query in SQ01 in the "Global Area" it is transportable when saved and you should get a pop-up requesting the transport number.  If you save a selection screen for that query with the starting designation "CUS&", it is also transportable when saved the pop-up should also appear. 
    Paul

  • Adding Standard Text to the Selection Screen obtained using PARAMETERS

    Hi all,
    I have a report program which has the selection screen declared by the key word PARAMETERS.
    Now I need to make the changes to this program such that a Text Editor appears on the Selection Screen and has a Standard text that should be displayed.
    How can I do it?
    I saw the screen number of the Selection Screen and went to screen painter and tried to add the Text Editot..but it did not let me dou2026.Why?
    How should I add a standard text to a selection screen? The standard text should not be on top , but some where on the screen.
    Regards,
    Jessica Sam

    Hi Sam,
    I dont want to create a new screen for this. On the existing screen whihc was built using PARAMETERS key word..i should insert a blokc of text whihc is mpre than 5-6 lines..how should i do it.
    I navigated to Text Elements---->Selection Texts
    it is now asking for Name and Text and i see in Name column the name of the parametsr that they used for Check box, radio button etc and in Text i see the text that is appearing on the screen
    Now i am not sure what is should do next
    My req is..i should display a block of standard text that doesnt change and whihc is of 4-6 lines?
    how should i do it?
    please also help me with what data declartions that i should do in parametrs key word in program?
    Regards,
    Jessica Sam

  • Is there a way to use 'GET PERNR' without the selection screens?

    I would like to use the GET PERNR event in a batch program without using the default selection screens.  I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period.  I've tried removing the screen number from the attributes screen, but still get these options.  Is this possible?

    hi Kiran,
    report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
    this is from SAPHelp: "Report Category
    Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
    hope this helps
    ec

  • How to Add a new fields in the selection screen of LDB.

    Hi All,
    I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
    So could you please tell me for that where i need to add the code for selecting the data.
    Thanks
    Roli

    Hi
    welcome to SDN forum
    If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
    if you wants to modify the std LDB of SAp means take the access key and to modify that code
    if you add the extra field you have to modify the where conditions in the code also
    see the doc
    A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
    LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
    Less coding s required to retrieve data compared to normal internel tables.
    Tables used LDB are in hierarchial structure.
    Mainly we used LDBs in HR Abap Programming.
    Where all tables are highly inter related so LDBs can optimize the performance there.
    Check this Document. All abt LDB's
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
    GO THROUGH LINKS -
    http://www.sap-basis-abap.com/saptab.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Re: **LDB**
    www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
    www.sap-img.com/abap/abap-interview-question.htm
    www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
    Gothru the blog which provides info on LDB's:
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Sample code
    TABLES: SPFLI,
    SFLIGHT,
    SBOOK,
    SCARR.
    START-OF-SELECTION.
    GET SPFLI.
    WRITE:/ ’SPFLI: ’, SPFLI-CARRID, SPFLI-CONNID,
    SPFLI-AIRPFROM, SPFLI-AIRPTO.
    GET SFLIGHT.
    WRITE:/ ’ SFLIGHT: ’, SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
    GET SBOOK.
    WRITE:/ ’ SBOOK: ’, SBOOK-CARRID, SBOOK-CONNID,
    SBOOK-FLDATE, SBOOK-BOOKID.
    GET SFLIGHT LATE.
    WRITE:/ ’ GET SFLIGHT LATE: ’, SFLIGHT-FLDATE.
    Regards
    anji

  • How to hide the selection screen of a Logical datebase?

    Dear All,
    I used the logical database PNP in one of my program by maintain the attribute 'Logical Database' of this program.
    Now I want to hide all the selection screen of this PNP during the ABAP runtime environment.
    Who can tell me how I can realize it?
    Thank you!
    Regards,
    Brian Liu

    Hi,
    If you call the logical database using a function module, the selection
    screen is not displayed.
    To call a logical database from another program, use the function module LDB_PROCESS.
    <b>Example code:</b>
    TABLES SPFLI.
    SELECT-OPTIONS S_CARR FOR SPFLI-CARRID.
    TYPE-POOLS: RSDS, RSFS.
    DATA: CALLBACK TYPE TABLE OF LDBCB,
    CALLBACK_WA LIKE LINE OF CALLBACK.
    DATA: SELTAB TYPE TABLE OF RSPARAMS,
    SELTAB_WA LIKE LINE OF SELTAB.
    DATA: TEXPR TYPE RSDS_TEXPR,
    FSEL TYPE RSFS_FIELDS.
    CALLBACK_WA-LDBNODE = 'SPFLI'.
    CALLBACK_WA-GET = 'X'.
    CALLBACK_WA-GET_LATE = 'X'.
    CALLBACK_WA-CB_PROG = SY-REPID.
    CALLBACK_WA-CB_FORM = 'CALLBACK_SPFLI'.
    APPEND CALLBACK_WA TO CALLBACK.
    CLEAR CALLBACK_WA.
    CALLBACK_WA-LDBNODE = 'SFLIGHT'.
    CALLBACK_WA-GET = 'X'.
    CALLBACK_WA-CB_PROG = SY-REPID.
    CALLBACK_WA-CB_FORM = 'CALLBACK_SFLIGHT'.
    APPEND CALLBACK_WA TO CALLBACK.
    SELTAB_WA-KIND = 'S'.
    SELTAB_WA-SELNAME = 'CARRID'.
    LOOP AT S_CARR.
    MOVE-CORRESPONDING S_CARR TO SELTAB_WA.
    APPEND SELTAB_WA TO SELTAB.
    ENDLOOP.
    CALL FUNCTION 'LDB_PROCESS'
    EXPORTING
    LDBNAME = 'F1S'
    VARIANT = ' '
    EXPRESSIONS = TEXPR
    FIELD_SELECTION = FSEL
    TABLES
    CALLBACK = CALLBACK
    SELECTIONS = SELTAB
    EXCEPTIONS
    LDB_NOT_REENTRANT = 1
    LDB_INCORRECT = 2
    LDB_ALREADY_RUNNING = 3
    LDB_ERROR = 4
    LDB_SELECTIONS_ERROR = 5
    LDB_SELECTIONS_NOT_ACCEPTED = 6
    VARIANT_NOT_EXISTENT = 7
    VARIANT_OBSOLETE = 8
    VARIANT_ERROR = 9
    FREE_SELECTIONS_ERROR = 10
    CALLBACK_NO_EVENT = 11
    CALLBACK_NODE_DUPLICATE = 12
    OTHERS = 13.
    IF SY-SUBRC <> 0.
    WRITE: 'Exception with SY-SUBRC', SY-SUBRC.
    ENDIF.
    FORM CALLBACK_SPFLI USING NAME TYPE LDBN-LDBNODE
    WA TYPE SPFLI
    EVT TYPE C
    CHECK TYPE C.
    CASE EVT.
    WHEN 'G'.
    WRITE: / WA-CARRID, WA-CONNID, WA-CITYFROM, WA-CITYTO.
    ULINE.
    WHEN 'L'.
    ULINE.
    ENDCASE.
    ENDFORM.
    FORM CALLBACK_SFLIGHT USING NAME TYPE LDBN-LDBNODE
    WA TYPE SFLIGHT
    EVT TYPE C
    CHECK TYPE C.
    WRITE: / WA-FLDATE, WA-SEATSOCC, WA-SEATSMAX.
    ENDFORM.
    Regards,
    Sumit.
    Message was edited by: sumit kumar
    Message was edited by: sumit kumar

  • Functional area(FKBER( field in the selection screen))

    Hi,
       I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
    Regards,
    Palani

    Hi,
    How you have filled the values?
    It is 16 CHAR long.

  • Functional area(FKBER field in the selection screen of the report painter))

    Hi,
    I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
    Regards,
    Palani

    1. Call GR22 and click "Characteristics".
    2. Check FKBER and assign a position number to it.
    3. Save and close the library.
    4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
    5. Use it in the General Data Selection or as a Lead Column, as per requirement.
    Or,
    1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
    2. Now follow the steps 2 through 5 above to achieve your result.
    Hope this helps.
    Cheers.

  • How to suppress the Selection Screen of Logical Database

    Hi,
    I am using one Logical Database for my report.
    I want to show my customized selection Screen.
    How can I hide the Selection Screen of Logical Database?

    Hi,
    Check the attributes of the report program where you assign the LDB. You can see the parameter Selection Screen press the F4 and check the LBD is provided any Blank screen or not.
    For some LDB's you can find the Report Category in the attribute section of the report. either you can create the new screen or standard screen might be provided with Blank.
    Check there ..
    If you don't find you can use LOOP AT SCREEN..ENDLOOP to hide the fields of LDB.
    Which LDB you are using.

Maybe you are looking for