Adding Management Console After Solaris 10 Install

What packages must be installed to add Sun Managment Console to a base Solaris 10?
I've added SUNWmccom (and the SUNWj3dev package it depends on); but, this does not install the Management Console's binary, /usr/sbin/smc.
Thank you.

Answering my own question :-}
Per Solaris 10 "System Administration Guide: Basic Administration" Chapter 2 "Working With the Solaris Management Console (Tasks)":
SUNWmc
SUNWmcc
SUNWmccom
SUNWmcdev
SUNWmcex
SUNWbmc
SUNWCprog

Similar Messages

  • Cannot start Solaris Management Console in Solaris 9

    I cannot start the Solaris Management Console in Solaris 9. The splash screen appears for a few seconds, then nothing else.
    There is a error: "Assertion Fail: Offset < fFileSize ..." something like that.
    Please help me~~~~~~~

    Java Bug 4838130:
    http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
    suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
    env JAVA2D_DEBUGFONTS=1 smc
    The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
    /usr/openwin/lib/X11/fonts/TrueType, i.e.
    env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

  • Solaris Management Console (SMC) - Solaris 9 x86

    I�ve just installed Solaris 9 (x86) version. I�m unable to install Solaris Management console.
    I was using below command to add listed patches:
    pkgadd -d . SUNWpmgr SUNWrmui SUNWlvmr SUNWlvma SUNWlvmg
    I�m unable to find these packages on cd1. Somehow they�re on cd2. These cd�s are direct extract from Sun�s web site.
    Anyway when I run the pkgadd command I�m getting the following error:
    �No package associated with (SUNWpmgr)�
    When I look into the SUNWpmgr, there are 2 files (pkgmap., pkginfo.) and 3 dir (install, archive, reloc)
    Same with other packages
    Please help me.

    I was able to correct this problem on my server
    The .server file is the smc java keystore that contains
    the private/public key pair for SSL
    You can create this file by executing
    cd /usr/sadm/lib/smc/bin
    certtool -genkey
    Once the keys are generated execute
    /etc/init.d/init.wbem stop
    /etc/init.d/init.wbem start
    if your smpatch no longer works
    take a look at the following article
    http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

  • Error connecting 8i Enterprise Manager Console after installation

    Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
    After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
    I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
    Any help would be really appreciated!!

    Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
    After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
    I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
    Any help would be really appreciated!!

  • Unable to connect to Exchange 2010 Management console after - Exchange 2010 SP3 Rollup 7

    We have been having issue with our Exchange Server 2010's Transport Service failing due to a database corruption. I was hoping that maybe applying the Roll-up 7 for Exchange might fix this issue, however after applying the patch we are unable to start the
    MSExchangeMailboxAssistants "Error 1053: The service did not respond to the start or control request in a timely fashion."
    Then I notice that we were unable to connect to the Management Console or through PowerShell. 
    Event 1000, Application Error
    Faulting application name: MSExchangeMailboxAssistants.exe, version: 14.3.210.2, time stamp: 0x53e2bf34
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x5315a05a
    Exception code: 0xe0434f4d
    Fault offset: 0x000000000000940d
    Faulting process id: 0x%9
    Faulting application start time: 0x%10
    Faulting application path: %11
    Faulting module path: %12
    Report Id: %13
    PowerShell error:
    Exception calling "TryLoadExchangeTypes" with "2" argument(s): "Could not load file or assembly 'Microsoft.Exchange.Man
    agement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name va
    lidation failed. (Exception from HRESULT: 0x8013141A)"
    At C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1:75 char:92
    + $typeLoadResult = [Microsoft.Exchange.Configuration.Tasks.TaskHelper]::TryLoadExchangeTypes <<<< ($ManagementPath, $t
    ypeListToCheck)
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : DotNetMethodException

    Hi,
    Please try the following steps to narrow down the issue:
    1. Uninstall and reinstall .NET package in Exchange server.
    2. Under location C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG, took a copy of Machine.Config.default, renam it to Machine.config and copy it under this path again.
    3. Do IIS reset by running iisreset from a Command Prompt window.
    4. Reboot the server and verify whether the Exchange services are started.
    Regards,
    Winnie Liang
    TechNet Community Support

  • A bunch of problems after Solaris 10 install...

    Hi everyone,
    At first, I'm pretty new in administrating unix systems so forgive me if some questions might sound evident to you.
    So there, I installed Solaris 10 on my x86 Pentium 2. After installation, it reboots and then kinda get stuck while booting. After a while sendmail claims it cant qualify it's own domain name.
    Then, It asks me to wait for the desktop logon screen before loging in. But than one never shows up. I managed to get a console login prompt, I logged on as root and, using kdmconfig, I set the desktop manager to Xsun. Now when I lounch /bin/X11/X , a solaris splash screen shows up and then nothing more happens... Since I dont know how or if it is possible to quit X at this point, I'm forced to push Reset and to re-wait to get mt console login prompt (and god, this takes time...).
    Any ideas about solving those problems? Thanks in advance!

    Hi everyone,
    At first, I'm pretty new in administrating unix systems so forgive me if some questions might sound evident to you.
    So there, I installed Solaris 10 on my x86 Pentium 2. After installation, it reboots and then kinda get stuck while booting. After a while sendmail claims it cant qualify it's own domain name.
    Then, It asks me to wait for the desktop logon screen before loging in. But than one never shows up. I managed to get a console login prompt, I logged on as root and, using kdmconfig, I set the desktop manager to Xsun. Now when I lounch /bin/X11/X , a solaris splash screen shows up and then nothing more happens... Since I dont know how or if it is possible to quit X at this point, I'm forced to push Reset and to re-wait to get mt console login prompt (and god, this takes time...).
    Any ideas about solving those problems? Thanks in advance!

  • [Help: Urgent] problems with accessing /console after apparent successful install of Portal server SP3.0sp3a

    Hi,
    HW: Sun Solaris 2.8
    I would really appreciate it you can cc: me if you can shed any light
    as
    to whats going wrong, and what I should do to fix the following
    problem.
    Portal server doesn't allow one to access /console (or /login) -
    0 length document is returned.
    We find the following in the enterprise server error log, when we
    attempt
    to access portal console (URI: http://....:8080/console)
    1) Installed SP3.0sp3a as Open Portal, i.e without the gateway and
    without
    SSL enabled.
    2) Our Unix users are served using YP
    ***From the server access logs : ***
    - - [16/Nov/2001:15:12:40 -0800] "GET /login HTTP/1.0" 503 0
    ***From the server error logs : ***
    [16/Nov/2001:14:11:27] info ( 4639): successful server startup
    [16/Nov/2001:14:11:27] info ( 4639): iPlanet-WebServer-Enterprise/4.1SP7
    BB1-04/05
    /2001 18:30
    [16/Nov/2001:14:11:28] info ( 4639): Loading Simple Session Manager by
    default. Sp
    ecify MMapSessionManager in servlets.properties to load persistent
    session manager
    [16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Default
    values for maxi
    mum number of sessions is 1000 with a time out value of 1800 seconds
    [16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Maximum
    number of sessi
    ons (1000) with a time out value of (1800) seconds
    [16/Nov/2001:14:12:40] info ( 4639): Internal Info: loading servlet
    login
    [16/Nov/2001:14:12:41] info ( 4639): Internal Info: loading servlet
    pllservice
    [16/Nov/2001:14:12:41] info ( 4639): pllservice: init
    [16/Nov/2001:14:12:42] failure ( 4639): Internal error: exception thrown
    from the
    servlet service function (uri=/login): java.lang.NullPointerException,
    stack: java
    ..lang.NullPointerException
    at
    com.iplanet.portalserver.auth.service.AuthD.printProfileAttrs(Compiled
    Code)
    at
    com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:160)
    at
    com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
    at
    com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled C
    ode)
    at
    com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.j
    ava:990)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at
    com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunne
    r.java:507)
    , root cause:
    Many thanks for your responses on this.
    Tarang Kumar Patel. WWW home:http://ic-www.arc.nasa.gov/ic/
    NASA Ames Research Center, MS 269-2, Moffett Field, CA 94035-1000
    Email: [email protected], Tel:(650) 604-4721 fax: (650) 604
    3594
    Stated views are my own IDEA, as I'm another I.D.E.A man "I Didn't
    Explain All"

    Just one more thing:
    I made the following setting in platform.conf
    ips.debug=on
    Now, the trace I see on the STDOUT/STDERR stream reveals :
    Received RequestSet XML : <?xml version="1.0" standalone="yes"?>
    <RequestSet vers="1.0" svcid="profile" reqid="2">
    <Request sid="qxcuekwwdrcfwubmmwuip82764q94o37r67n@[email protected]@8080@z
    repvc"><![CDATA[<ProfileService ver="1.0" reqid="0"><GetProfile  searchFlag="false"
    admin="false"><Profile profileName="mercip/authentication" profileType="9"><Priv p
    rivName="iwtSession-addSessionListenerOnAllSessions"/></Profile></GetProfile></Prof
    ileService>]]></Request>
    </RequestSet>
    ---->NEED TO FILL APPSHASH -----
    getProfile.walktree
    321^iwtSession-addSessionListenerOnAllSessions-pv
    com.iplanet.portalserver.profile.service.ProfileServiceException: 321^iwtSession-ad
    dSessionListenerOnAllSessions-pv
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Exception.java:42)
    at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(
    ProfileServiceException.java:47)
    at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compile
    d Code)
    at com.iplanet.portalserver.profile.service.ProfileService.getProfile(Compi
    led Code)
    at com.iplanet.portalserver.profile.service.ProfileService.processProfileRe
    quest(ProfileService.java:134)
    at com.iplanet.portalserver.profile.service.ProfileService.processRequest(P
    rofileService.java:123)
    at com.iplanet.portalserver.profile.service.ProfileService.process(Compiled
    Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(PLLR
    equestServlet.java:139)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Co
    de)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
    .java:507)
    ProfileResponse: exception key:321
    ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
    ProfileResponse.toXMLString:method id is 0
    Sent ResponseSet XML : <?xml version="1.0" standalone="yes"?>
    <ResponseSet vers="1.0" svcid="profile" reqid="2">
    <Response><![CDATA[<ProfileService vers="1.0" reqid="0"><Exception>321^iwtSession-a
    ddSessionListenerOnAllSessions-pv</Exception></ProfileService>]]></Response>
    </ResponseSet>
    ProfileResponse: exception key:321
    ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
    ProfileUtils.getProfileResponse: Response content <ProfileService vers="1.0" reqid=
    "0"><Exception>321^iwtSession-addSessionListenerOnAllSessions-pv</Exception></Profi
    leService>
    Profile Error:
    Invalid attribute or privilege name
    com.iplanet.portalserver.session.SessionException: Invalid attribute or privilege n
    ame
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at com.iplanet.portalserver.session.SessionException.<init>(SessionExceptio
    n.java:30)
    at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
    (Session.java:642)
    at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
    (Session.java:502)
    at com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:112)
    at com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
    at com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled Co
    de)
    at com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.ja
    va:990)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
    .java:507)
    Authd Profile Attributes
    cookieDomains
    cookieName->iPlanetPortalServer
    authHost:authPort->........:8080
    authProto->http
    authHostIP->.....
    authHostURL->http://.......:8080/login/default
    Lets hope this helps

  • Ultra 5 won't boot after Solaris 8 install

    Hello. After installing Solaris 8 on an ultra 5, the system won't reboot. After trying many permutations of the install, including a bare minimum and the whole shebang, it became clear that the system always hung at the same spot in the boot process (from a boot -v), immediately following the line:
    cpu0: SUNW, UltraSPARC IIi (upaid 0 impl 0x12 ver 0x13 clock 270 MHz)
    Has anyone seen this problem before? We reset the boot PROM with set-defaults from the ok prompt and that made no difference. This machine ran fine under Solaris 7, so I don't think it's a hardware failure. Any suggestions would be greatly appreciated. Thanks!
    --jenny                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Can't be the OS if the disk doesn't show any activity.
    I can't tell from your post if you're using a screen/keyboard or a serial console? Have you removed the keyboard and attached a serial terminal to serial port A? Several types of hardware failure will output errors there even if the failure occurs before the framebuffer is initialized (memory errors are common).
    Darren

  • No Java Console after Solaris upgrade

    Hi,
    after upgrading from Solaris 8 to Solaris 9, the Java Console stopped functioning. It starts and authenticates successfully, but as it reaches the stage "Starting Console...", it stucks there.
    Admin server is running, I have checked it by running Console from another host (Solaris 8).
    After doing some truss'es, I found that everybody is waiting for "java" (/iplanet/servers/directory52/bin/base/jre/bin/java) to exit, but it doesn't wants to.
    I'm running Console bundled with DS 5.2 via ssh X forwarding. The same configuration worked before Solaris upgrade.
    If you have some thoughts, share it with me.
    Thanks,
    Kristof

    See available classes in $ORACLE_HOME/jdbc/lib/.

  • Newb Question - Running out of disk space after Solaris 10 install (x86)

    After installing Solaris 10 on my x86 environment on a 80GB drive, I noticed I'm practically out of disk space. The space seems to be allocated in \devices\pci@0,0 and \devices\isa. There are several fd@8,0:a like devices in ISA at are a ridicuous number (ie. 8589934592.0GB) Block Device. Can someone give background on what is going on here or what I need to do to fix it?
    Thanks.
    -Vinny_C

    Well - in typical newbie fashion - I actually was out of space. Turns out that during the install I did not allocate enough to the \ root install folder as all the space was in my home mount.
    Cheers!

  • [Solved] Display manager failing after Nvidia driver install

    I installed Nvidia-304xx drivers from the website due to which xorg stopped working. I fixed it by following the wiki by installing bumblebee and using intel graphics for screen.
    However now when I boot I am getting an error saying "Oh no something has gone wrong. A problem has occoured and the system can't recover"
    Please help.
    Note: I am using 64 bit system
              Startx works on ttyx
    Last edited by harshsahil48 (2014-02-16 18:15:23)

    GDM log
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.12.5-1-ARCH x86_64
    Current Operating System: Linux harsh 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9d527456-8b84-4444-9997-a970795972df rw quiet
    Build Date: 09 January 2014 08:47:24AM
    Current version of pixman: 0.32.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 15 12:34:27 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Automatically adding GPU devices
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling Mouse0
    (II) xfree86: Adding drm device (/dev/dri/card0)
    (--) PCI:*(0:0:2:0) 8086:0116:1028:0491 rev 9, Mem @ 0xd2400000/4194304, 0xc0000000/268435456, I/O @ 0x00007000/64
    (--) PCI: (0:1:0:0) 10de:124d:1028:0491 rev 161, Mem @ 0xd0000000/33554432, 0xa0000000/268435456, 0xb0000000/67108864, I/O @ 0x00006000/128, BIOS @ 0x????????/524288
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension Present
    Initializing built-in extension DRI3
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    (II) "glx" will be loaded by default.
    (WW) Warning, couldn't open module glamoregl
    (II) Unloading glamoregl
    (EE) Failed to load module "glamoregl" (module does not exist, 0)
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    Loading extension GLX
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 2.99.910
    (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
    (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
    (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
    (++) using VT number 1
    (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
    (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): "Tear free" disabled
    (**) intel(0): Forcing per-crtc-pixmaps? no
    (II) intel(0): Output LVDS1 using monitor section Monitor0
    (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output HDMI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): Output VIRTUAL1 has no monitor section
    (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
    (==) intel(0): DPI set to (96, 96)
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
    (==) intel(0): Backing store enabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): HW Cursor enabled
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) intel(0): DPMS enabled
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i965
    (II) intel(0): [DRI2] VDPAU driver: i965
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    (II) intel(0): Setting screen physical size to 423 x 238
    (II) config/udev: Adding input device Power Button (/dev/input/event4)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 2.8.2
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event4"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (**) Video Bus: always reports core events
    (**) evdev: Video Bus: Device: "/dev/input/event13"
    (--) evdev: Video Bus: Vendor 0 Product 0x6
    (--) evdev: Video Bus: Found keys
    (II) evdev: Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (**) Video Bus: always reports core events
    (**) evdev: Video Bus: Device: "/dev/input/event12"
    (--) evdev: Video Bus: Vendor 0 Product 0x6
    (--) evdev: Video Bus: Found keys
    (II) evdev: Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
    (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    (**) Logitech USB Optical Mouse: always reports core events
    (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
    (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
    (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
    (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    (--) evdev: Logitech USB Optical Mouse: Found relative axes
    (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Laptop_Integrated_Webcam_2M (/dev/input/event11)
    (**) Laptop_Integrated_Webcam_2M: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2M'
    (**) Laptop_Integrated_Webcam_2M: always reports core events
    (**) evdev: Laptop_Integrated_Webcam_2M: Device: "/dev/input/event11"
    (--) evdev: Laptop_Integrated_Webcam_2M: Vendor 0xc45 Product 0x6430
    (--) evdev: Laptop_Integrated_Webcam_2M: Found keys
    (II) evdev: Laptop_Integrated_Webcam_2M: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2M" (type: KEYBOARD, id 10)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    (--) evdev: AT Translated Set 2 keyboard: Found keys
    (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.15.0, module version = 1.7.3
    (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5782 (res 57)
    (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4972 (res 96)
    (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
    (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    (**) Dell WMI hotkeys: always reports core events
    (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
    (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    (--) evdev: Dell WMI hotkeys: Found keys
    (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
    (II) config/udev: removing device Logitech USB Optical Mouse
    (II) evdev: Logitech USB Optical Mouse: Close
    (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
    (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    (**) Logitech USB Optical Mouse: always reports core events
    (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
    (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
    (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
    (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    (--) evdev: Logitech USB Optical Mouse: Found relative axes
    (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    (II) intel(0): EDID vendor "SEC", prod id 21579
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 120.53 1600 1648 1680 2160 900 902 907 930 +hsync -vsync (55.8 kHz eP)
    (II) intel(0): Modeline "1600x900"x0.0 74.09 1600 1648 1680 1992 900 902 907 930 +hsync -vsync (37.2 kHz e)
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    setversion 1.4 failed: Permission denied
    (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/udev: removing device Logitech USB Optical Mouse
    (II) evdev: Logitech USB Optical Mouse: Close
    (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
    (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    (**) Logitech USB Optical Mouse: always reports core events
    (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
    (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
    (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
    (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    (--) evdev: Logitech USB Optical Mouse: Found relative axes
    (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4

  • Invalid Credentials in SAP Management Console on Solaris

    I have been deploying the latest SAP Host Agent  (Version 7.20, patch 63) on our Solaris 5.9 application servers. Days of reviewing and searching through SCN have not produced a resolution. There is a significant restriction in our environment that makes it impossible for the Basis team to get even temporary root access. 
    Other details of interest:
    1.     The users <SID>adm are local to each application server (/etc/shadow is in play).
    2.     These SAP notes have been reviewed 927639, 1564645, 992907,1348820 and many others.
    To this point my Unix admin friends have not considered allowing any type of read access for <SID>adm to /etc/shadow.
    It is more likely  to snow  this week here in Texas than getting root access on these servers.
    Here are some of the files of interest for the SAP Host Agent
    Contents of /tmp
    srwx------   1 sapadm   sapsys         0 Sep  1 12:53 .sapstream1128
    srwx------   1 <SID>adm   sapsys         0 Sep  1 10:25 .sapstream50014
    srwx------   1 <SID>adm   sapsys         0 Sep  1 10:25 .sapstream50013
    Contents of /usr/sap/hostctrl/exe
    total 137466
    drwxr-x---   2 root     sapsys      1024 Aug 17 16:51 .
    drwxr-x---   5 root     sapsys        96 Aug 17 16:51 ..
    -rw-r-----   1 root     sapsys       352 Sep  1 10:46 host_profile
    -rwxr-x---   1 root     sapsys       322 Aug 17 16:51 hostagent.mf
    -rwsr-x---   1 root     sapsys    428992 Aug 17 16:51 hostexecstart
    -rwxr-x---   1 root     sapsys    300872 Aug 17 16:51 ldappasswd
    -rwxr-x---   1 root     sapsys   1607224 Aug 17 16:51 ldapreg
    -rwxr-x---   1 root     sapsys   6673224 Aug 17 16:51 librfccm.so
    -rwxr-x---   1 root     sapsys   3662680 Aug 17 16:51 libsapcrypto.so
    -rwxr-x---   1 root     sapsys   1621912 Aug 17 16:51 libsapdbadactrl.so
    -rwxr-x---   1 root     sapsys    208696 Aug 17 16:51 libsapdbdb6ctrl.so
    -rwxr-x---   1 root     sapsys    467128 Aug 17 16:51 libsapdboractrl.so
    -rwxr-x---   1 root     sapsys   5714920 Aug 17 16:51 lssap
    -rwxr-x---   1 root     sapsys   4654504 Aug 17 16:51 sapacosprep
    -rwxr-x---   1 root     sapsys    812352 Aug 17 16:51 sapcimc
    -rwxr-x---   1 root     sapsys   5690472 Aug 17 16:51 sapcontrol
    -rwxr-x---   1 root     sapsys   1173624 Aug 17 16:51 sapcpp47.so
    -rwxr-x---   1 root     sapsys   1276416 Aug 17 16:51 sapdbctrl
    -rwxr-x---   1 root     sapsys   4910096 Aug 17 16:51 saphostctrl
    -rwxr-x---   1 root     root     1491992 Aug 17 16:51 saphostexec
    -rwxr-x---   1 root     sapsys   2585312 Aug 17 16:51 saposcol
    -rwxr-x---   1 sapadm   sapsys   19044152 Aug 17 16:51 sapstartsrv
    -rwsr-x---   1 root     sapsys    519056 Aug 17 16:51 sapuxuserchk
    -rwxr-x---   1 root     sapsys    431008 Aug 17 16:51 sldreg
    -rwxr-x---   1 root     sapsys   4951592 Aug 17 16:51 sldreglib.so
    -rwxr-x---   1 root     sapsys   2143704 Aug 17 16:51 xml71d.so
    --> Observations about this default installation of the SAP Host Agent software
    1.     <SID>adm has very limited access to the executables
    2.     Only root can edit host_profile. If the permissions are changed, saphostexec will not run (because the permissions have changed)
    3.     The group ownership of saphostexec is a severe restriction
    4.     Changing ownership of the executables to <SID>adm or sapadm will result in loss of OS information only accessible by root.
    ps u2013ef | grep hostctrl   
      root 15763     1   0   Sep 01 ?           0:02 /usr/sap/hostctrl/exe/saphostexec pf=/usr/sap/hostctrl/exe/host_profile
      sapadm 15765     1   0   Sep 01 ?           2:26 /usr/sap/hostctrl/exe/sapstartsrv pf=/usr/sap/hostctrl/exe/host_profile -D
        root 15813     1   0   Sep 01 ?           1:24 /usr/sap/hostctrl/exe/saposcol -l -w60 pf=/usr/sap/hostctrl/exe/host_profile
    Any additional suggestions or solutions that the community can share is greatly appreciated.

    > To this point my Unix admin friends have not considered allowing any type of read access for <SID>adm to /etc/shadow.
    >  It is more likely  to snow  this week here in Texas than getting root access on these servers.
    Any thought about RBAC?
    http://blogs.oracle.com/jayd/entry/solaris_tip_of_the_week7
    Markus

  • Solaris 9 x86 platform update 4 8/03 can not start Management Console

    smc& but cannot start management console 2.1
    no problem on solaris 8 x86 platform.
    Error as below :
    I cannot start the Solaris Management Console in Solaris 9. The splash screen appears for a few seconds, then nothing else, core dumped.
    There is a error: "Assertion Fail: Offset < fFileSize ............../../../src....
    Any ideas ??????

    Java Bug 4838130:
    http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
    suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
    env JAVA2D_DEBUGFONTS=1 smc
    The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
    /usr/openwin/lib/X11/fonts/TrueType, i.e.
    env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

  • Fail in loading Exchange Management Console

    Please help:After Opening the Exchange Management Console and Clicking on "Microsoft Exchange On-Premises" ,I encountered the following error:
    <The following error occurred when setting up Remote Powershell session to 'ServerName.MyDomain.net':
    Closing remote server shell instance failed with the following error message : The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the about Remote Troubleshooting Help topic. >

    1. Remove the WinrmIIS Extension from "Programs and Features"
    2. Reboot the server
    3. Execute the cmd "winrm quickconfig". This adds an exception for the remote management in the Windows firewall.
    4. Install "Winrm IIS extension
    5. Try open Exchange Management Console
    Let me know what happens :)
    Thanks for your guide;
     "WinRM IIS Extension" is not installed.and firewall is off.
    When I open up the Exchange Management Console ,after these message : 
    <Initializing ...
    Setting up Remote Powershell session to: ServerName.MyDomain.net ...>
     I'm seeing these errors:
    <The following error occurred when setting up Remote Powershell session to 'ServerName.MyDomain.net':
    Closing remote server shell instance failed with the following error message : The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the about Remote Troubleshooting Help topic. >
    also When I open up the Exchange Management Shell,After several hours the below message remain:
    <VERBOSE:Connecting to  ServerName.MyDomain.net >

  • Exchange Management Console Tools Compatibility

    Is there a timeline for getting a compatible version of this software for Windows 8 Enterprise x64.  As an IT Professional, this is really getting in the way of my ability to enjoy your new OS.  I have work to do, and its not enjoyable
    bouncing back and forth between OS's to get it done.  Other than this issue there is only minor annoyances, and I can be patient for resolutions.
    Thank you,
    Exmo14

    What version of Exchange are you using?  I have the Management Console for Exchange 2010 installed and running happily under Win8 Ent x64.  Installed from the Exchange dvd, patched to the same level as the server (that was a sticking point for
    me initially, didn't realise the versions had to match exactly).
    Running it via the following batch file, which I found in another thread somewhere.  Your short filenames may vary depending on what else you have installed, it's "Exchange Management Console.msc" you're looking for.
    set __COMPAT_LAYER=RUNASINVOKER
    set COMPLUS_Version=v2.0.50727
    start C:\Progra~1\Microsoft\Exchan~1\V14\Bin\Exchan~1.msc
    Nigel Benfell B.Sc. MCSA

Maybe you are looking for

  • Why can't I open photos from Iphoto in Photoshop?

    I'm trying to open a picture I downloaded from my camera into iPhoto using Photoshop, but when I click the iphoto icon I get no pictures.

  • Just ordered a new macbook pro

    I am excited about receiving my new Macbook Pro next week. I have never owned one but has been working with one at my church, which is the main reason why I got it. We are going to be running Final Cut Studio 2. One of my friends told me that I may n

  • Integrated planning (sap-bi)

    Can any one help me regarding the planning function "forecast" with example for easy understand.?

  • BOXES

    There are really annying boxes around everything. Like, on the desktop there will be a little black box around the Mac HD. how can I remove it.

  • Hp 1200 series all-in-one won't print in greyscale

    I've selected the option "Print>Properties>Print in greyscale" but there is no effect.  Window 7 or Vista (usually on Adobe PDFs)