Adding New attributes to Business Partner Data

Hi Experts,
I am new to SAP CRM. The requirement with me is that i have to add two attributes 'County' and 'Demographics' (both Text Fields) to the Business Partener Master. Is there some way to achieve this by configuration like by set types etc. or will i have to use workbench to add these fields. Please Help?
Thanks.
Rahul

Hello Rahul,
I think the COUNTRY should already be present in the Business Partner master data. Please follow the steps below to find the BOL Structure of the BP Address data. In this structure all the address related data would be present. I hope the fields which you are looking should already be present in this structure.
1) Run the txn GENIL_MODEL_BROWSER
2) Give the component set as BP_APPL
3) "BuilHeader" is the root object. Navigate to the relation "BuilStandardAddressRel" under the root object.
4) The child object under this relation is "BuilStandardAddress". In the attribute structure, you will find the structure CRMST_ADDRESS_BUIL . This structure holds the data.
To check the values using this BOL model, follow the steps below
1) Run the txn GENIL_BOL_BROWSER
2) Give the component set at BP_APPL
3) Go to the search object "'BuilHeaderAdvancedSearch'". Give the advanced search criteria and search.
4) The result would be displayed and try navigating to the "BuilStandardAddress" child object as mentuioend in the steps above.
Hope this helps.
Regards,
Vinay

Similar Messages

Adding new Field in Business Partner General Data

Hi All,
I'm working on a mySAP CRM 4.0 implementation.
I would like to extend the business partner data with this new three field:
1) Capital Stock
2) Base Number
3) Sales pl.
The three field are Dun & BradStreet information.
I created a BSP that show all Business Partner General Data and now we want to show also those fields.
In order to extend the BP data we received two suggestion:
The first one is to use the BP marketing Attributes.
The second is to use the Easy Enhancement Workbench.
I know that advantages of the EEW is the automatic creation of the layout (BSP & DYNPRO).
Doo you have any suggestion??
It's a good solution to use the EEW??
Thanks a lot.
Eugenio

Hi,
First of all thanks a lot for the fast reply.
I have to add some information:
The end-user will use the application only in PC-UI mode (through Enterprise Portal).
We are customizing the BSP application (Accounts).
I know that in past some colleagues used the EEW to extend or to add some field to application BP. I remember that the field (after Enhancement the new fields was visible in SAPGUI mode and in BSP mode).
Now my questions are the following:
1) Are you sure that I can use EEW only 10 times??
2) We are using the BAPI (CRMXIF_PARTNER_SAVE) in order to add Business Partner in the system; after the creation of the new fields with EEW the BAPI (CRMXIF_PARTNER_SAVE) will be able to insert the new fields?? Or we need to extend this BAPI with new fields?
The second question is very important for us because we have to import in the system about 30.000.000 of Business Partners.
Kind Regards.
Eugenio.

Adding new fields to business partner relationship

Hi all,
We are trying to add new fields to business partneru2019s relationship using EEWB. We are adding 4 new fields when relationship type is "Is shareholder of", so we have created a new project at transaction EEWB and then a new extension and the wizard is started. At the wizard, we have define the 4 new fields with cardinality 1:1 and time dependent without gaps.
Also we have done all the extension setup, so the new fields only appears when that relationship is created and we can fill the new fields.
The problem that we have is that every time that you create a new relationship type "Is shareholder of", even if you fill the new fields or not, the system spend more than one hour to save the data, having also a "STACK_STATE_NO_ROLL_MEMORY" dump... It seems that the system goes inside a loop that never ends, but we haven't change any function, because the standard functionality is enough for us.
Any help on how to proceed?
Thanks in advance!!

Please, anyone can help?
Thanks!!

Distribution of Business Partner Data

I'm trying to determine the best method of distributing business partner data from R/3 to CRM via XI.
Under CRM 5.0 help for Distribution of Business Partner Data, there are two ways given for distributing business partner data.
1. Replication by means of the SAP NetWeaver Process Integration (XI).
2. Distribution via the ALE/IDoc interfaces.
Does anyone have an opinion on which method is best? Method 1 obviously goes through XI, but I'm not sure about method 2.
We won't be using CRM middleware, so that's not an option. We do need to implement XI.
Thanks for any advice you can provide on this subject.

Hi,
with ALE/IDOC you can also go for XI (for monitoring purposes, errror handling)
for more about IDOCs and XI
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

IDOC to update business partner data in FSRI(part of CRM system) .

Hi ,
I want to know an INBOUND IDOCs to update business partner data in FSRI (part of CRM system) .
Please help .
Regards
Chetan
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Dec 21, 2010 5:14 PM
Moderator message -
Also, when closing old threads, there is no need to add a comment. Adding a pasted answer like "rectified" only brings old threads to the top of the forum list and pushes current ones down. If you do add a comment, please indicate just how the problem was resolved.
Edited by: Rob Burbank on Dec 21, 2010 1:20 PM

Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

Post Business Partner data from SBL CRM to SAP CRM

Hi CRM Gurus,
I am very new to SAP CRM. I have got an assignment wherein I will get the XML file from Siebel CRM, which will contain the "Business Partner" data.
I need to upload this data into SAP CRM by mapping all the fields available in the XML file.
Please let me know the step by step process to reach the goal.
Regards
Sandy

Sandeep, since this is a conversion related task you might want to browse http://sap.help.com and search for the so called 'XIF Adapter'. This adapter is part of SAP CRM's Middleware and provides the functionality to import and export individual objects using XML/SOAP technology.
Second option you could evaluate is BP creation through the usage of the standard BADI's that SAP delivers. Let me know whether this gets you started, Tiest.

Creation of new fields for business partner relationship

Hi experts,
We are currently on SAP CRM 7.0 EHP1.
We have a requirement to maintain a custom checkbox (Relevant for business) on each business partner relationship.
Can you please let us know on how we can achive this requirement.
Thanks in advance,
Vamsi.
Moderation: Duplicated. I lock this one and continue here: [Create a new field in Business Partner Relationships|Create a new field in Business Partner Relationships#10795912]
Edited by: Joaquin Fornas on Nov 8, 2011 12:17 PM

Please, anyone can help?
Thanks!!

How to do search of business partner data, using a message from external sy

Hi CRM Gems,
please send the answer to the following question.
1.How to do search of business partner data, using a message from external system. What FMs, BAPI etc that can be used for this functionality?
your answer will be valuble to me.
Regards,
Krishna..

Hi krishna,
Look at BAPI BAPI_BUPA_SEARCH.
Regards.
Manuel

Mass Update of Business Partner Data in CRM

Hi,
I would like to know how I can perform a mass update of business partner data in CRM and then have this replicated into R/3.
I have found notes 802804, 876602, 859632 but these only apply to CRM 5.0 and we are currently working on CRM 4.0. Does anyone know of anything similar which exists in CRM 4.0?
I have checked other posts and found help files links like the one below but is this only on CRM 5.0? (http://help.sap.com/saphelp_crm50/helpdata/en/3c/9b56fae6c7424cafcdf17370399812/frameset.htm )
Has anyone used the tx. MASS in CRM?
Also our volume update levels is as high as 300,000 record and updating in CRM and replicating into R/3 through the middleware is causing performance problems.
Does anyone have any tips on the best approach for this? Many thanks.
Regards
JoJo

Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

Entering Business Partner data from IC Webclient - CRM2007

Just wanted to check that if I enter Business partner data from the IC Webclient is the data stored in the CRM backend tables for example BUT000, BUT050 etc and if so is this done on the fly or a scheduled update? If not what tables are they stored in. Also can I see the same information once it is entered in the webclient via the CRM transaction BP Thanks

Hi Niten,
The tables are the same (for example: but000 for master partner data, but050 for relations, and so on...).
The data is updated when you press the respective save button, or when you press the 'end' button at telephony bar (to end an Interaction Center Interaction).
And yes, you can then check the information in BP t-code.
Just try it and see by yourself
Kind regards,
Garcia

How the business partner data is created in EB

Hi
How the business partner data is created in EB ( SRM).
thanks
sankar

Hi,
I imagine you would like to synchronize business partner data, which are created in backend, into SRM.
you can use Tcode BBPGETVD or BBPUPDVD or run/schedule bbp_vendor_sync (need customizing).
Regards,
Bertrand

How to add a New Tab in Business Partner Transaction

Hi Friends,
Please help me out to "How to add a new Tab in Business Partner Transaction?
Regards,
Ricky

Hi Rajendra,
It will be gratefull to have some EEWB docuement.Can you please forward me ?
Regards,
Ricky
Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM

Adding new attribute to Master data - Not present in ECC

Hi,
We want to add a new field in the master data object 0plant. the new field is not present in the R/3 side. So we are planning to maintain it manually.
Is it feasible? Can someone explain how to approach the situation?
Since it is not going to come in Process chain or any of the mappings below InfoObject will the process chains work properly?
Regards

Hi
if you cant impliment any logic you cam maintani it mannually.
First add attribute to master data object and activate.
Do master data load if required.
Then right click on materdata addtribute and manage -> content tab -> Content
display complete data and you can maintain attribute values individually for all ercords one by one (will be pain even for 100 records).
another alternative is of doing file upload for this attribute.
Regards
Sudeep

Added new attribute to WBS

Here is my current issue.
I added a "deleted indicator" to the WBS_ELEMT_ATTR on r/3, then created a new infoobject in BW (did not flag it w/master data) and added this new infoobject as a navigational attribute to the WBS_ELEMT infoobject in BW.
Went to the infosource for WBS_ELEMT and added it to the transfer structure and the comm. structure. Activated it. Then reloaded the master data for WBS from r/3. Went to "Maintain Master Data" for WBS_ELEMT and I can see the new field is populated correctly in the new field I added to WBS_ELEMT.
Then I went to the cube 0PS_C04 and marked the new attribute I added to WBS_EMEMT as a navigation attribute and re-activated it and the update rules.
The problem is in the query and when viewing data with list cube or cube contents the field is blank. But its not blank with maintain master data for WBS_ELEMT.
Does anyone have any clues as to my mistake or what I need to do. I'm needing to restrict a query based on 0PS_C04 by this new attribute I added to WBS.
Will reward points as always.
Richard

Hey Richard,
WBS_ELEMT is a navigational attribute in 0PS_C04 and "deleted indicator" is a navigational attribute of WBS_ELEMT. So, "deleted indicator" is a second level navigation attribute for 0PS_C04. This will not show you any data in the query even if you can see the data for this field in WBS_ELEMENT. One more thing is that in the update rules for 0PS_C04, you have mapped only WBS_ELEMENT but not "deleted indicator". Hence, the data is not displayed in the report.
You can handle this in 2 different ways.
1. Add "deleted indicator" to the cube directly and map it all the way down to the data source.
2. Add the "deleted indicator" to the cube and in the update rules, map it as an attribute of WBS_ELEMENT.
Unless it is mapped to the cube from the comm structure in the update rules, you can not see the data in the report. Try one of these and let us know if it works.
Thanks and Regards
Subray Hegde

Business Partner Data Archiving - Help Required

Hi,
Am New to Data Archiving and need help to Archive Business Partner in CRM. I tried to Archive some BP's but it was not archiving. Kindly throw some light on it.
Problem we face are:
1) When we try to write a Business Partner to an Archive File the Job Log Shows finished but no files are created in the System.
2) When we try to delete the BP from Data Base it doesn't show the Archived BP's that could be deleted (I guess this is because there are no archived file).
Archive Object Used is CA_BUPA. We have created a Variant and set the Time as Immediate and Spool to LOCL.
Kindly let us know if there is any step we are missing here and if we are on the wrong track.
All answers are appreciated.
Thanks,
Prashanth
Message was edited by:
        Prashanth KR

Hi,
To archive a BP following steps are to be followed.
A. Mark the BP to be archived in transaction BP >status tab
B. Run dacheck
FYI : Steps on how to perform dacheck :
1. In transaction DACONTROL change the following parameter to the
values : for CA_BUPA .
No. calls/packages   1
Number of Objects   50
Package SizeRFC     20
Number of Days       1 (if you use mobile client it should be more)
2.If a business partner should be archived directly after the
archiving note was set, this can be done by reseting the check
   date with report CRM_BUPA_ARCHIVING_FLAGS.
   here only check (set) the options :
   - Archiving Flag
   - Reset Check Date
Reset all options should be unchecked.
3. go to dacheck and run the process
4. This will change the status of the BPs to 'Archivable'
   *Only those bp's which are not involved in any business transactions,
    install base, Product Partner Range (PPR) will be set to archivable
The BP's with status 'Archivable' will be used by the archiving
     run.
Kindly refer note 646425 before goint to step C ***
C.Then run transaction CRM_BUPA_ARC.
- Make sure that the "selection program" in transaction "DACONTROL"
   is maintained as " CRM_BUPA_DA_SELECTIONS"
Also create a variant, which can done by excecuting
CRM_BUPA_DA_SELECTION and enter the variants name for the field
Variant. This variant is the buisness partner range.
- Also please check note 554460.
Regards, Gerhard

Adding New attributes to Business Partner Data

Similar Messages

Maybe you are looking for