Adding solman to a demo system in solman stms

Here i need to add solman in my demo domain controller systems. As soon i give stms in solman it asks me to configure transport domain fo solman. I choose other configuration. I have given the respective ,description, target host and system no. It shows me the information "Could not determine tp profile parameter DBHOST" and as soon as i click ok it shjows me : 'TMS not configured for this SAP System'. i have found one more thing which may help you in assisting me. In my E:\usr\sap\trans\bin i have found only two files DOMAIN.CFG and TMS_test.sid. Iam missing tpparam file in it. Iam bit confused. Please assist.

I found the exact same error as you describe during my installation of SM40 on windows, have you been abe to resolve the issue? if so, could you please provide me the solution. When you copy the tpparam_inst<sid> file to tpparam you would be able to proceed as a short work arround, however if you need to adjust a parameter again this seems not to work.
thanks.

Similar Messages

  • Unable to register a satellite system in solman

    Hi,
    I am trying to register our stage system in solman using t-code SMSY but I am unable to do so. I do not get any errors. My RFC connection tests between the solman and the stage systems are successfull.
    I came to know that the stage system is not registered in the solman while trying to create a new maintenance transaction.
    In the Maintenance Optimizer transaction, under step 1, I am not able to see the SID of my stage system under 'System'.
    How can one check all the satellite systems that are configured in the solution mananger. I am able to see the SID of my stage system in t-code SMSY under the components 'server' , 'databases' & 'systems'. How can I narrow down the cause of this issue. Please help.
    regards,

    Hi Sunny,
    I have assigned our stage system to the logical component SAP ECC under 'system groups and logical components' tab in SMSY
    options available are
    SAP ECC -> SAP ECC Server -> SAP ECC. I select SAP ECC and I see 'System Assignment' screen on the right hand side. I see the already configured systems. The various tabs under 'System Assignment'  are as follows
    Product version  Development system Quality assurance system Production system
    I see our development system under the tab 'Development system'. I added my stage system under 'SAP Reference System'. Now I am unable to view my system while I create a new maintenance transaction under Operations > Change Management > Maintenance Optimzer ,
    If I change the role of my stage system to the role 'Production' then I am able to see my stage system when I create a new maintenance transaction. Pls note that the role that I selected for my stage system during the configuration was 'SAP Reference System'
    Hi Amit,
    I followed your step but still unable to view my stage system under Operations > Change Management > Maintenance Optimzer ,
    Create new maintenance transaction. Are only systems with 'Production Role' visible in Maintenance optimizer. Pls note that the leading role of the Solution is 'Production System' as seen under System groups and logical components - Solution Landscapes
    - SAP ECC.
    regards,

  • How to add EP 7.0 system in SOLMAN with smsy

    Hi Gurus
    I have solman ehp1 SPS25, want to add the managed systems through TA :SMSY
    The Tabs are showing in the Landscape components are __>
    1. server   2. Databases   3.  Product systems (Product systems w/o product, SAP ERP, SAP SOLUTION MANAGER)
    4. Technical Systems ( JAVA,..)
    I want to add a EP 7.0 system in to SMSY, so  i added at (server, Databases). but in the Product systems i could not able to see the SAP NW ,....)
    kindly let me know how or where to add an EP system into SOlman.
    Thanks in advance
    Regards
    Balaji

    Hello Balaji
    1 i think i have to configure this in http://<solmanhost>/sld by giving the path of EP system and EP systems user J2ee_admin
    please correct me.
    --> You have to create the data supplier bridge in your http://<ep7host>:5<instance no>00/sld under administration --> data supplier and give the path of the Sol man system with user SLDDSUSER (normally or a user with sufficient authorization). J2EE_ADMIN probably has enough rights but I wouldn't recommend placing J2EE_ADMIN in such connection as the user-id can get locked if the password is incorrect or at same point of time the password is changed and you forget to also update the data supplier user/pass.
    A data supplier bridge will send updated data to the target defined in the data supplier. So after you trigger the update of your local EP7 SLD, the data supplier comes into action and you should also see the timestamp is updated in your Sol Man SLD (under technical systems search the SID of your EP7 SAP system).
    2 can it be done in Portal's VisualAdmin? please correct me.
    do i need to delete the existing portal system ( which configured manually) from solman smsy?
    Two times yes I would recommend you cleanup your manual entries (deleting them)
    Kind regards
    Tom

  • No IBase/Component transferred in SLFN from a satellite system to Solman

    Dear all,
    We have Solution Manager 4.0 with SPS18 with working ChaRM and Service desk.
      I have the following problem : a support message (created from the menu   Help->Create Support Message  in a satellite system) arrives to Solman,  but the fields Ibase and Component are filled by zeros and are inactive so I canu2019t change them manually.
      The question is: are these values transferred from the satellite system to SolMan or not?
    I have debuged the program calling under Help->Create Support Message   and have not found such functionality.
    From the other hand, all forum messages implicitely imply this.
    Due to technical reasons I canu2019t use notif_create transaction, where there are Ibase and component  fields.
       From the SolMan configuration side everything is OK:
    System landscape is correct, Ibase and components are generated and active, they have the correct external names.  The functionality of ChaRM that utilises Ibase and components is working well, so I donu2019t see any problems from this side.  OSS 449330 (delete the record from BCOS_CUST table with the value u201CTST_CUSu201D in Application field ) is not the case.
    Please advice.

    Hi,
    In this case, could you please kindly verify the points mentioned in this note has been verified ?
    note #824640
    Hope this helps.
    Cheers
    SH

  • Creating Support Messages from Satellite System without SolMan user account

    Hi
    We are having some problems with users "creating support message" from our ECC system  to SolMan, if the user does not have a user account in Solution Manager.
    It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
    We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
    Regards
    Lars

    Hi,
    you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
    With this TA, it is easy to create BP for each satellite system.
    Best regards
    Marc

  • WEB AS JAVA System In SOLMAN

    Hi Experts,
                  Normally we add the abap system in SOLMAN where we can monitor.
                  Is it possible to add a web AS java in the SOLMAN where we can
                  monitor centrally. If so can you please suggest me some documents
                  or procedure to do this.
    Regards,
    Vamshi.

    Hi,
    yes, it is possible to monitor SAP AS JAVA on Solmon.
    1. On System JAVA is installed, start sapccmsr agent
    2. Before that you need to copy csmreg file to your java system.
    There is an excellent from service market place about this. please refer the following
    service.sap.com/monitoring
    Thanks!

  • Connection / Permission Problems with PI System to Solman

    I have 3 PI Systems (7.4) who are connection to a Solman 7.1. The abap solman connection/configuration works fine.
    In the java configuration assistant at diagnostic agent, test status and Host Agent status are green.
    On the next,next,next step create user get the error:
    500 SAP Internal Server Error
    ERROR: no RFC-permission for function module BAPI_USER_GET_DETAIL. (termination: RABAX_STATE)
    But abap user have SAP_ALL, SAP_NEW and SAP_S_RFCACL permission. Java User are j2ee_admin and have also the SAP_S_RFC_ACL permission.
    If I check the connection in the systemparameter assistant, get the error:
    Fehler Action failed : No Diagnostics Agent is currently available for system BPT. Therefore the preliminary look-up of the Managed Java Message Server information (XXX.XXX:3600) via the Agent is not possible.
    But Diagnostic Agent status is green ? Very strange !
    Have anybody a solution ? Thanks for your help !

    Customer open the Message Server Port 3901, telnet works.
    Diagnostic Agent status are both green !
    Also get the error message:
    500 SAP Internal Server Error
    ERROR: no RFC-permission for function module BAPI_USER_GET_DETAIL. (termination: RABAX_STATE)

  • Any standard RFC there to communicate between satellite system and Solman?

    Hi Gurus,
                        Any standard RFC there to communicate between satellite system and Solman?
                   Thanks in advance.
    Regs,
    BBR.

    following four RFCs are created so as to initiate the communication between the satellite system and the solman system
    _READ, _TRUSTED, _BACK, _TMW
    but, you have to Read the Links and the Notes too to understand their names and their meaning
    http://help.sap.com/saphelp_sm310/helpdata/en/48/647e3ddf01910fe10000000a114084/content.htm
    http://help.sap.com/saphelp_sm310/helpdata/en/b3/dd773dd1210968e10000000a114084/frameset.htm
    http://www.slideshare.net/wlacaze/sap-solman-instguide-initial-customizing-presentation

  • Facing problems to register my system in solman

    Dear Experts,
    please clarefy me how can i Register my GRC system in solution manager..
    i checked and tried in smsy but iam facing some problems inthis
    so please let me the process or steps for to register my GRC in sap
    Regards

    Hi Swathimatta,
    You should register the GRC system the Solman SLD. The Landscape Fetch job willl update the SMSY.
    You will need to perform some checks in the SMSY definition,  you should refer to the section "4.17 SAP GRC Access Control 5.3" of the      [SAP Solution Manager Landscape Setup Guide|https://websmp109.sap-ag.de/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf].
    Regards,
    Allam

  • Extracting Monitoring reports from J2EE system to SOLMAN

    Hi,
    I would like to monitor a J2EE system from Solution Manager system and obtain Some related reports from J2EE system to SOLMAN in order to analyze its performance.
    please  suggest me about the ideas to go about the same.
    Your inputs will help me a lot.
    Regards,
    Kaushik

    Hi,
              To monitor JAVA system on Solution Manager you need to install Solution Manager Diagnostic or Sitescope or CA Wily Introscope for your java system and after that you can configure your Java monitoring on Solution Manager.
              Please refer  Note 1107033 for CCMS config for java. 
    V....

  • Step by step guide to connect Satellite systems to SOLMAN....

    Hi all,
    Can you provide a  Step by step guide to connect <b>Satellite systems like (SAP CRM, SAP ECC 5.0 Etc..) to SOLMAN</b> and also what are the major config steps involved in connecting a satellite systems to Solman.
    The connection is basically to monitor key performance issues of the satellite systems through Solman....
    Need ur inputs on this...
    Thanks and Best regards,
    Subba

    Hi,
    In a system landscape you can only add logical components. Please double click on the name of the logical components. You will arrive in the maintenance area for logical components. There you can add systems to your logical components.
    Check the following links also.
    satellite system
    Solution Manager - How to connect to satellite system ( refer this)
    Re: Service desk RFC destination in the Satellite system
    Re: Satellite Logon
    Regards,
    Note: Points always encourage me to reply !!

  • Creation of support message in SolMan without having user id in SolMan

    Hi Everyone,
    Need your help in this issue.
    I have solution manager configured to create a service desk message from satellite system.
    We dont want everyone (Users from satellite system) to have an SOLMAN user id to create a service desk message. We want that the users from the satellite system create a support message seamlessley without touching the solution manager.
    What roles and authorization do we need to assign to each users in satellite system to create a suppport message in solution manager ( without having User id in SOLMAN).
    Any help is greatly appreciated.
    Thanks in Advance.

    Hi Kuldeep Thakur,
    the role is : SAP_SV_FDB_NOTIF_BC_CREATE to be able to create message from satellite system to Solman.
    That you will get the Reported by in the service desk message itself, you need to create the Business Partner (BP transaction) for this user and assign the BP to the user ID in transaction BP under Employee section indification.
    BR,
    Markus

  • Product is not defined in Supplying plant in demo system

    Hi Experts,
    I am doing initial load in demo system. While doing Material transfer I am facing Product is not defined in supplying plant issue.
    Though I am transferring master data 1st time to the plants, how can i extend product to the supplying plant first.
    please advice.
    Thanks,
    Bala.

    Hi Bala.
    Are you using special procurement key for Production in Another Plant? If yes, perhaps you can try to send first the material at production plant and only then send it at planning plant to APO. I've never had this issue, so this is just an idea/educated guess.
    Also, what support packages are you on?
    Regards,
    Tiago

  • XI demo system

    Hi,
    I like to learn XI, is there a free demo system to download ?
    A+
    Ihsen

    Hi,
    XI is not a part of the Sneak Previews as it needs both the JAVA and ABAP stack
    Regards,
    Bhavesh

  • How to design a demo system landscape

    Hello,
    I need to build up a system landscape for demos and would like to ask if there are any best practices. I need a portal and would like the ESS/MSS-scenario with an IDES system. But using the IDES system everytime I need it I have to build up the data for the current time period. Is there any possiblity in IDES (or IDES successors, if there is one) to generate data for current time periods?
    How are you handling the data of your demo systems?
    Thanks a lot,
      Vanessa

    Hello,
    Read about IDES release strategy and found this:
    A New version of IDES is available with every correction release. It is not possible to upgrade an existing IDES version to a new release. You can, however, install service packages for the corresponding correction release. This means that every new IDES Release involves a new installation. The IDES Release Strategy ensures that you always get new master data, transaction data, customizing functions, and documentation that are tested and checked for quality.
    Seems installing the new release of IDES will be the most probable solution.
    Regards,
    Shailesh

Maybe you are looking for