Adding Updates To Existing Deployment

I have a software updates deployment already configured where the deadline has passed and clients have restarted and successfully installed the updates. If I add some new updates to that existing deployment I have two questions -
1. What will trigger the client to see the new updates? Will this be a machine policy retrieval (every 15 minutes) which will then trigger a software update deployment evaluation scan or will they have to wait until the schedule deployment re-evaluation
which is set to run once every 7 days to get the new updates? Or does the machine policy retrieval check for new updates/deployments on its own?
2. Once the client receives the updates I'd assume they'd see a "Past Due Will Be Installed" notification and the updates would install. Once they install will the user still get the 90 minute notification for restart and the countdown at the end
or will the restart happen sooner since this was an existing deployment whose deadline already passed?

Hi,
1. as the updates are already evaluated by the clients they will install on the next machine policy refresh.
2. As the deadlien is already passed they will install at once. Reboot will depend on your settings for reboot but will be the same as you normally use.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

Old project with entity 4.0 breaks when adding new model or updating an existing model.

i have an old 4.0 project that was using entity 4.0
in VS2013 if I try to update an existing model or add a new one, it will forcefully install the entity framework 5.0 even though the selection in the box was to use 4.0
it goes out to nuget to do this and then it will forever add 5.0 even if I uninstall it.
5.0 getting installed completely breaks my application. References to tables disappear and cross reference for NO reason at all with another model.
How can i get it to just let me use 4.0 so I can move on OR how can i upgrade my old model into 5.0?
I'd rather not got tthe 5.0 route because that changes a lot of the ways things were done and would break even more code.

Hello,
>>in VS2013 if I try to update an existing model or add a new one, it will forcefully install the entity framework 5.0 even though the selection in the box was to use 4.0
It is not very clear how you install the Entity Framework, as far as I know, the EF version 4.0 is available with .NET 3.5, from .NET 4.0, it will use the 5.0 by default, if you want to use the EF 4.0, you could change the target to .NET 3.5.
>>How can i get it to just let me use 4.0 so I can move on OR how can i upgrade my old model into 5.0?
If it is EF 5.0, as far as I know, it uses the DbContext API instead of the original ObjectContext API(the EF 4.0 uses this API) which provides a better performance, if you want to keep to use ObjectContext API, you could follow this article:
Reverting Back to ObjectContext Code Generation
The article shows the configuration for VS2012, for VS2013, you could change the Code Generation Strategy from T4 to Legacy ObjectContext.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ADR Removes updates from existing Software Update Group

I'm working on using SCCM for Software Updates, was previously only using WSUS. I think I've got everything configured and I can deploy updates successfully. So now I'm working on automating things with some ADRs. The problem I'm running into is that I'm
trying to set the ADR to add updates to an existing group. Office 2007 updates in this example. I have the search criteria in the ADR set to look for Office 2007 updates released in the last 30 days and it is set to run once a month.
So in my mind, each month it will run and add the necessary updates to the existing group, and the group will become a cumulative list. The problem I'm having is that every time the rule runs, it seems to remove all the existing updates from that
group and only add in the updates that were returned for that run. For example, I can set the rule to search for updates released in the last 60 days and will see 15 updates in the group. If I change the rule to search for updates released in the
last 30 days and run it again, the group will only have 10 updates in it. Or if I manually add updates to the group and then run the rule again, the updates I manually added are removed. None of these are expired or superseded. Any ideas?

The spirit of the statement is more or less correct, but as it applies to this scenario it is not. To the clients, nothing has changed. The update is part of the update group before and after. Thus, the client only knows about the newly added updates thus
there really is no client side processing churn except for the newly added updates. As for the SQL processing, that's what SQL does well -- that's the whole point of using a enterprise class RDBMS. Tip-toeing around SQL, particularly for a process that only
happens once a month, is (sorry) silly. Now, if you were to do this everyday, then yes, that's bad. Once a month, it's trivial. Do of course make sure you have a good SQL maintenance plan in place that includes re-indexing and rebuilding statistics (not the
built-in maintenance task).
Jason | http://blog.configmgrftw.com | @jasonsandys

Outlook-Updates to EXISTING Calendar and Contact entries not syncing correctly - two PC's

My setup is two PC's (one at work, one at home), one BB. Both PC's Outlook are Outlook 2003, SP3. I do not use BES. I sync my BB to both PCs.
I have experiencing specific issues where updates to existing Outlook Calendar (mtg notes) and Contact (contact notes) are not being sync'd from one PC to the next PC (via my BB device - Sprint Curve 8330 running OS v4.5.0.131). I sync PC's to my BB using BB Desktop Mgr (v4.7) and USB cable.
Here are specific details of what I am doing to duplicate the issues.
1) Calendar:
I have been away from work the past two days. In that time, I have updated two (2) calendar items at my PC at home - both items are at my work PC as well.
Item one: I moved the date from Wed to Thurs, and added a note - done from home PC
Item two: I changed the description of the meeting, and shortened appt from 3 hrs to two hrs - done from home PC
Both items sync OK with my BB
Upon coming to work this morning, neither sync'd to my work PC. I finally did the following:
Item one: I deleted from Desktop Outlook, opened in BB put a space in the meeting description saved.
Item two: Opened on BB, put a space in the meeting description saved.
Upon resyncing, here is what happened
Item one: Sync Mgr noticed conflict of deleting from PC and changed in BB. I chose to copy item to PC. This results in syncing correctly to PC
Item two: Sync'd to PC correctly.
Something is NOT right. The sync process did NOT recognize these two items that changed until I manually intervened (updating on the BB).
2) Contact:
I ran a test today where on my work PC, I added a comment into one contact's note. I successfully sync'd that contact note to my BB. However, when I sync the BB with my home PC, that note did NOT make it to the home PC.
I opened the contact (in edit mode) on my BB, inserted a space to the contact's name, erased the space, and saved the contact.
I then sync'd the BB to the home PC again. This time, success - the contact's note got sync'd to the home PC.
HELP
I have seen this sort of thing a few times before (where sync did not sync a Calendar event/mtg correctly) in the past three months or so I owned my BB - but this is the first time I decided to actually test out the fix. This is the first time I noticed with a contact (maybe b/c i do not look at my Contacts updates as closely as I do my Calendar mtgs updates)
Message Edited by Winger on 06-12-2009 10:32 AM
Message Edited by Winger on 06-12-2009 10:33 AM

Thanks for your feedback:
2 things..... I somehow had created a duplicate calendar which may have been >blocking the sync. If you have it as well, delete this calendar and try to sync.
I have several calendars in Outlook - there is the main one which contains everything, then where I have marked certain entries as 'Personal' or as 'Anniversaries' etc a separate calendar is created with those entries in them.
Also, I read somewhere that some calendar entries will corrupt the sync of the > phone. Delete all new entries since the last successful sync and enter a test >entry and try to sync the phone. To the best of my knowledge, there is no >indication that an appointment is "bad" other than the phone will stop syncing. >So perhaps after each sync, check the phone to ensure any new entries appear.
I can't possibly tell when the last successful synch occurred! I also don't want to delete entries - I need them all!
There appears to be very little advice on this problem, hopefully this will >work.
Yes, it seems that the Great God Apple isn't anywhere as smart as it thinks it is. I am really frustrated and not a little angry. This is basic stuff for any other phone, let alone a Smart Phone!
Thanks for your comments, though.

Adding QM to Existing UCCX Premium w CR

Trying to understand the licensing behind adding QM to an existing deployment of CR.
UCCX v 9.x
Ordering guide is not very clear on part #, if any

Hello-
Do I understand that you currently have a deployment of WFO with Compliance Recording licenses and you want to add Quality Management licenses as well, correct?
You should be able to mix the license types and then just assign the desired license to an end user.
9.x QM seat: L-CCX-90-A-QM-LIC
I hope that helps.
DJ

Introducing Software Updates into Existing Network

I'm having some trouble getting my head wrapped around how software updates work with the SCCM 2012 environment. My university is rolling out SCCM 2012 R2 into an existing environment where there is currently no control over software updates. All
of our machines are currently retrieving their updates directly from Microsoft using Windows 7's built-in Windows Update service. We are beginning to push out the ConfigMgr client to all of the workstations on the domain. My question is how should
I handle software updates for these machines going forward. Some of these machines may be disconnected for periods of time from the network while others are connected all of the time. Should I just download all past updates for Windows 7, Office
2010, etc. and deploy all of these updates to the existing machines. All new machines won't be a problem as they are being imaged and deployed using SCCM, so I'll know that they're up-to-date. My thought was just to create software groups containing
these past updates and deploy them to all workstations. Then I will have an ADR setup to handle all future Patch Tuesday updates. Is this the best way to handle this scenario?

Okay, I understand what you guys are saying and I've setup something similar. I downloaded all past updates for all Microsoft products we have in use. I broke these up by year so as to avoid any deployment package limits, so I placed these updates
in software groups named "All 2010 Updates", "All 2011 Updates", etc. with corresponding deployment packages. I'm not separating anything by product as I'm just letting the ConfigMgr client handle what a client needs. I then deployed these groups
to all of my workstations, and will leave them deployed to the collection for the foreseeable future or until everything gets caught up. Does this sound okay?
Now here's another question. I noticed for this month's patch Tuesday that there were quite a few revised updates that were originally released in 2011. My ADR grabbed all updates released or revised in the past 1 month. These updates now
exist in both my "2014 08 August" and "All 2011 Updates" software update groups (as well as my "2011" and "2014-2" deployment packages). So basically it appears I now have duplicate updates. I thought if an update was revised they would expire
the original update. Is this not always the case?
I appreciate the responses guys.

Re-download a Software Update to a Deployment Package

Hi,
Is there a way to force SCCM to re-download a Software Update into a Deployment Package?
When you download a Software Update (right-click the update and click download), the wizard asks which Deployment Package to add it to (an existing package or create a new one). The update is then downloaded to the UNC path specified in the package
with each update under a different directory (named as a GUID).
My issue is that many of these GUID directories have been accidentally deleted from the UNC path. I know how it happened and that isn't the issue here - I simply want to download the updates again. I would like to right-click my Software Update
group, select "Download", point it to the existing package and have all the updates download again.
When I try and do this, the wizard works fine and it processes each update and says "Success" - however, they are not actually re-downloaded! It's like there is a link somewhere between the update and the package such that it knows it should
already be there and therefore it skips over it without actually checking whether it really does exist.
Is there a way to force SCCM 2012 to ignore the fact that it thinks the update is already there and re-download it? What I really want to do is change the "Downloaded" field from "Yes" to "No" which I think would achieve
what I want to do - I just can't find a way to do it.
What am I missing?
Cheers,
David

I had this same basic problem on a new SCCM 2012 R2 suite I built. I made all the Software Update Groups and Packages and deployed them. They all worked except for the one for Office 2010. Errors said could not process that package, couldn't find a
folder within the source location for the package, and on the DPs the Office 2010 package was there but had 0 for the size of the package.
I deleted the Office 2010 source update folder and package. Then you go to the updates in question, r-click and select deploy (it'll let you do that even if it thinks it's already deployed), create the new package, let the download run, r-click, and edit
membership as needed, and deploy. This worked for me.
Ben JohnsonWY

SCCM 2007 Added update to search result, but don't wont to install them

Hello everybody,
I have some problem with my sccm 2007. Sccm added updates on the client machine but don't wont to install them. Here is my windowsupdate.log. Any help would be appreciate!
2014-02-03 12:04:06:825
784 350
AU AU received policy change subscription event
2014-02-03 12:04:36:861
2200 1980
COMAPI -------------
2014-02-03 12:04:36:861
2200 1980
COMAPI -- START -- COMAPI: Search [ClientId = CcmExec]
2014-02-03 12:04:36:861
2200 1980
COMAPI ---------
2014-02-03 12:04:36:907
2200 1980
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
2014-02-03 12:04:36:907
784 bb4
Agent *************
2014-02-03 12:04:36:907
784 bb4
Agent ** START ** Agent: Finding updates [CallerId = CcmExec]
2014-02-03 12:04:36:907
784 bb4
Agent *********
2014-02-03 12:04:36:907
784 bb4
Agent * Include potentially superseded updates
2014-02-03 12:04:36:907
784 bb4
Agent * Online = Yes; Ignore download priority = Yes
2014-02-03 12:04:36:907
784 bb4
Agent * Criteria = "(DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')"
2014-02-03 12:04:36:907
784 bb4
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-02-03 12:04:36:907
784 bb4
Agent * Search Scope = {Machine}
2014-02-03 12:04:38:954
784 bb4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-02-03 12:04:38:954
784 bb4
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://sccmprod.domain.local:80/ClientWebService/client.asmx
2014-02-03 12:04:47:891
784 bb4
Agent WARNING: Failed to evaluate Installed rule, updateId = {189A8F50-0C3A-4FDF-8BC2-BC23A3EB11FB}.101, hr = 80242013
2014-02-03 12:04:50:506
784 bb4
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-02-03 12:04:50:506
784 bb4
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://sccmprod.domain.local:80/ClientWebService/client.asmx
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {4AE85C00-0EAA-4BE0-B81B-DBD7053D5FAE}.104 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {726B7201-862A-4FDE-9B12-F36B38323A6F}.104 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {C5306702-92EC-4E99-9C77-2B70FB60078B}.101 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {7647D502-6E6F-4B6F-8E17-030168FB344E}.202 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {26928006-BF0E-4806-B5AA-489F64CC863A}.201 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {C5171A07-B024-44B4-B74A-A2EC2EEC177C}.102 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {505FDA07-B4F3-45FB-83D9-8642554E2773}.200 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {E1C9C708-3EA9-411C-A7C1-AC8AAC284912}.200 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {1FE1AC0A-7B22-470B-A317-5DA507385409}.101 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {9DB82D0B-5611-4BC1-A4B8-432FE1A3CC43}.201 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {F2C4640C-7687-4250-83D0-62DE1570DD9B}.103 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {567D7A0D-7F11-4C75-BA80-E7DD1B88FBE3}.105 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {D5FD720E-0F2C-4363-AA87-6AD4A6D11B0E}.106 to search result
2014-02-03 12:04:51:090
784 bb4
Agent * Added update {BE1A890E-593C-4EB2-9ADE-A09B4E8AD0D5}.202 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {22091E0F-3395-4CF9-9F3D-4AC28BD868AD}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {AEF6280F-8C4D-4804-9913-407582227E75}.202 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {E923690F-B6CD-442D-8CBA-EA162C00FB18}.202 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {55F1750F-564A-4E7C-962C-289818F647DD}.202 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {48993210-7C75-4DC4-917C-0BF6CCA5C60D}.106 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {FB2F4410-5A9D-4D71-A766-A39C095ADD2A}.106 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {609AEF10-0A3C-4484-BD38-86BB38E3EFA3}.104 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {A1893712-C814-4AC9-AEB3-4292A63EF2B8}.102 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {965F4712-FC2F-4AF6-A80A-909211E12B74}.101 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {FDA58512-32F3-4A5D-A5C4-05A193E037D4}.103 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {B4413613-7062-4F6B-A1E4-7A957409A51F}.102 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {C8514613-8E11-41C0-919C-DB7ECC292402}.100 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {9334B915-72B1-4F60-8885-4C327D7CC433}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {3E606416-36F7-4CAC-86A1-C3839368767E}.102 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {6CFB7D17-F556-423A-B052-0A1F0463572E}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {53F2CC17-4951-4D4C-920F-4E44445F1EE2}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {3A6D1E19-0A32-4128-A2EB-72FCAC4C058C}.102 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {3F15001A-A051-4CEF-8642-FF241D063C9A}.101 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {6AA7561A-7EBF-4601-B040-D73804C38356}.101 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {B89EC71A-1103-4EA7-B123-1C4D2E23F97A}.101 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {6FF0041B-435E-42BA-87DA-9F021C655E41}.103 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {594A6A1B-58C4-4664-B5D1-4337F8633458}.105 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {86C0F41D-6B1D-43D1-97D6-023C5B7C3343}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {5A88841E-DE21-4595-A5E4-49AE13640D3C}.104 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {3F6E4422-97A1-4485-A586-104B65B36C76}.102 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {07B23623-9428-438E-8867-7348BBB95AAF}.202 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {023BB023-490F-4DF3-BCAA-9521EE8B5847}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {A2CDBA23-37CF-48C6-8182-16305985A886}.102 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {9E280124-F061-4371-8DBE-0F960957277D}.103 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {FE133824-41AF-4F69-B146-B8EB6A6505C0}.201 to search result
2014-02-03 12:04:51:091
784 bb4
Agent * Added update {1BB3DE24-0D76-4D59-9B9E-556722BFE852}.101 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {175E3625-729A-4B66-AA17-BF492524A1C5}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {E023B326-53E4-4DC1-AF6B-FE28290F7D9B}.104 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {6E03D226-B005-4BE7-8254-7C1760886BFD}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {3D250F27-F8DA-4616-82E8-B3EC16AF2DBC}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {AD43B627-B2C6-4B26-BEEF-02BDB1C4A5FE}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {C7DB1D28-9160-4E63-9EAE-2C7DF322DC00}.105 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {21ED7B2A-F1CA-4865-9FFE-AC527BFDBD8C}.200 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {8D7C892A-0F79-406C-91ED-2A3B2CBE122D}.101 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {1C82B52A-6679-4D70-BE61-BC3E1F6AD4F5}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {6547EC2A-8A7C-467B-9045-0DE89B6856B5}.104 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {202C2C2C-9BB6-453B-9A75-3E80F1AD981D}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {81A49D2C-314B-4A5A-BB6C-9D52A2707735}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {41346B2E-35C4-45C5-9F82-9B70FE9253CB}.200 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {D0FBAC2F-D08F-4A7B-A826-92B1C5AE0BC5}.200 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {AF347830-F2BA-44FB-9429-539921038509}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {A448DD32-C91B-414D-9EFE-465A92AC4642}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {E31F6B34-7F48-4226-A566-04ECC2CBDE48}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {7725B934-3206-441D-90A6-824BAFC0F4EF}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {E0840035-6B21-4554-A6E9-2FFEBC99D9AA}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {70F4F236-0248-4E84-B472-292913576FA1}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {EAA48E38-404A-479B-8957-D7D50AF86918}.101 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {0989F038-54B4-4085-81EA-AA078B633748}.200 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {546CD439-B7C8-45E9-BE72-71493E296807}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {3B82CD3B-0163-4185-8FF5-7D18C05D2267}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {66EE0B3C-1093-401B-8F21-70CD31FD46BA}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {84A1813C-A410-42C4-B875-7CA1C4A5ACC6}.101 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {C499223D-2F22-4626-BBE5-F5A35E7A5854}.204 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {EC1C253D-A3C5-49FB-A56A-9F2EEB223A1D}.200 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {D5B0233E-30E5-4C79-844C-8D07FCADF5CE}.103 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {2655493E-0518-4FB7-9AE6-221D3FAF2C9D}.101 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {3739A53E-845D-4945-9A5F-F5CE38AFCB56}.102 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {2908BF3E-E6D4-4789-9908-E03A0A29AE8E}.201 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {50E1A53F-E351-47A0-BAD4-1B0D223AE629}.200 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {0C737C40-B687-45BC-8DEB-83DB8209B258}.101 to search result
2014-02-03 12:04:51:092
784 bb4
Agent * Added update {62498940-D04D-4769-AF9A-F4CEC3A927D4}.104 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {48BEEF41-9D2D-4E72-9A61-59F98B12C07A}.204 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {CE09B442-0473-400A-82AE-9CD91C8D76EA}.200 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {0EEBE242-F0AD-4A1A-8796-4BFB54642198}.202 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {F3C64D43-89FB-452F-A7D5-60C1DC0ECF96}.102 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {41987343-1244-4F4E-8585-B1CCA27E48BE}.104 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {B9866145-A3EC-4B3C-A3D2-7203F04DF9FD}.101 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {CC74BC46-3001-4DB6-A714-B26660C0DFDB}.102 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {6D435D48-E94B-4C1F-AF51-E57CF310271E}.202 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {5CC5D348-10B2-4EB6-B446-B0F814D5B80E}.101 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {ED981249-8D8F-42A1-87DB-0AB5C07430B2}.201 to search result
2014-02-03 12:04:51:093
784 bb4
Agent * Added update {F939194A-E1AE-44D7-A6CA-33FE0891CE46}.102 to
2014-02-03 12:04:51:108
784 bb4
Agent * Found 276 updates and 71 categories in search; evaluated appl. rules of 1302 out of 2025 deployed entities
2014-02-03 12:04:51:149
784 bb4
Agent *********
2014-02-03 12:04:51:149
784 bb4
Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-02-03 12:04:51:149
784 bb4
Agent *************
2014-02-03 12:04:51:170
784 bb4
Report REPORT EVENT: {1E4B028B-0DFE-436E-AF9F-3F42A300EEC6}
2014-02-03 12:04:51:127+0100 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 CcmExec
Success Software Synchronization
Windows Update Client successfully detected 276 updates.
2014-02-03 12:04:51:170
784 bb4
Report REPORT EVENT: {46820305-3D31-42E7-9827-D538BDF0BA2D}
2014-02-03 12:04:51:127+0100 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 CcmExec
Success Pre-Deployment Check
Reporting client status.
2014-02-03 12:04:51:172
784 bb4
Report CWERReporter finishing event handling. (00000000)
2014-02-03 12:04:51:172
2200 1980
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-02-03 12:04:51:350
2200 1980
COMAPI - Updates found = 276
2014-02-03 12:04:51:350
2200 1980
COMAPI ---------
2014-02-03 12:04:51:350
2200 1980
COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-02-03 12:04:51:350
2200 1980
COMAPI -------------
2014-02-03 12:04:56:149
784 bb4
Report CWERReporter finishing event handling. (00000000)

Hi friend,
I like to answer on postings like yours, its a good exercise for my work and its really cool to have some topics where all people here will contribute.
JohnnyS is a friend of mine which is working with me at our office and we talked a little bit about your problem.
So his opinion was to use the UBCD4Win and work with that option.
The advice of him was:
Grab a USB-HDD case and put one drive in it and boot with UBCD4Win. Then copy all important data to a folder on the external HDD and remove the uneeded data on it. Just the important data!
Make a backup of your data on the external drive from both HDDs. I hope you will have enough free space.
Format the drive in your machine and recover it. Install the system as usually on your first HDD.
Then put the data to where you want.
So I am not sure if I understanded your question right, a little bit more explanation would be useful. I think that will be a long thread. ;)
Greets

BusinessPartners: Adding/Updating

Good Day
Experts:
I am in need of some assistance today working with the oBusinessPartners object. Are thers any code examples of how to handle adding and updating Business Partners? I tried searching through the help and could not find anything. Of concern is the managing of the BillTo and ShipTo records as well.
Thanks,
Ed
Edited by: Ed Dobias on Jul 7, 2008 9:00 PM

Hi Ed,
How to add a BP:
// Create an instance of the BP object
SAPbobsCOM.BusinessPartners sboBP = (SAPbobsCOM.BusinessPartners)_sboCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oBusinessPartners);
// Set the basic properties
sboBP.CardCode = "S00001";
sboBP.CardName = "New Supplier 1";
sboBP.CardType = SAPbobsCOM.BoCardTypes.cSupplier;
// Set optional properties
sboBP.CreditLimit = 100000;
sboBP.Currency = "USD";
// Add the BP
int iRetVal = sboBP.Add();
if(iRetVal != 0)
    // Add failed so report error to user
    _sboApp.SetStatusBarMessage("Error creating BP: " + _sboCompany.GetLastErrorDescription(), SAPbouiCOM.BoMessageTime.bmt_Medium, true);
How to add an address to an existing BP:
// Create an instance of the BP object
SAPbobsCOM.BusinessPartners sboBP = (SAPbobsCOM.BusinessPartners)_sboCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oBusinessPartners);
// Use the GetByKey method to retrieve the existing BP
if (sboBP.GetByKey("S00001"))
    SAPbobsCOM.BPAddresses sboAddresses = (SAPbobsCOM.BPAddresses)sboBP.Addresses;
    // Check to see if addresses already exist
    if (sboAddresses.Count > 1)
        sboAddresses.Add();
    else
        // First address always exists, but may be blank
        sboAddresses.SetCurrentLine(0);
        if (sboAddresses.AddressName != "") sboAddresses.Add();
    sboAddresses.SetCurrentLine(sboAddresses.Count - 1);
    // Set the properties for the new address
    sboAddresses.AddressName = "Billing2";
    sboAddresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo;
    sboAddresses.Street = "789 Virtual Street";
    sboAddresses.ZipCode = "1234";
    // Update the BP
    int iRetVal = sboBP.Update();
    if (iRetVal != 0)
        // Update failed so report error to user
        _sboApp.SetStatusBarMessage("Error updating BP: " + _sboCompany.GetLastErrorDescription(), SAPbouiCOM.BoMessageTime.bmt_Medium, true);
else
    // BP wasn't found so report error
    _sboApp.SetStatusBarMessage("Unable to find S00001 in the database", SAPbouiCOM.BoMessageTime.bmt_Medium, true);
How to update an existing address on a BP:
// Create an instance of the BP object
SAPbobsCOM.BusinessPartners sboBP = (SAPbobsCOM.BusinessPartners)_sboCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oBusinessPartners);
// Use the GetByKey method to retrieve the existing BP
if (sboBP.GetByKey("S00001"))
    SAPbobsCOM.BPAddresses sboAddresses = (SAPbobsCOM.BPAddresses)sboBP.Addresses;
    // Loop through the addresses to get to the correct address
    for (int i = 0; i <= sboAddresses.Count - 1; i++)
        sboAddresses.SetCurrentLine(i);
        if (sboAddresses.AddressName == "Billing" && sboAddresses.AddressType == SAPbobsCOM.BoAddressType.bo_BillTo)
            // This is the address I want to update so change the properties
            sboAddresses.Street = "765 Virtual Road";
            break;
    // Update the BP
    int iRetVal = sboBP.Update();
    if (iRetVal != 0)
        // Update failed so report error to user
        _sboApp.SetStatusBarMessage("Error updating BP: " + _sboCompany.GetLastErrorDescription(), SAPbouiCOM.BoMessageTime.bmt_Medium, true);
else
    // BP wasn't found so report error
    _sboApp.SetStatusBarMessage("Unable to find S00001 in the database", SAPbouiCOM.BoMessageTime.bmt_Medium, true);
Kind Regards,
Owen

How can i update an existing item in sap using CSV file?

Hi,
i am trying to update an existing Item in SAP using a CSV file.
in the message log i get an error message that the item already exists.
what should i do in order to update the existing record?
Thanks, Udi

Hi..........
I would sugest you to use Tab delimited file and choose proper option in order to update the itsm master in DTW......
Regards,
Rahul

When i login to update my existing apps, the login window shows the wrong apple id. and it's all prayed out, i can't change it. how do i solve this problem?

When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

Every time I try to update my existing apps I'm not successful and I get a message saying it can't connect. I've try changing my password and still no success.

I'm getting a can not connect message every time I try to update my existing apps that need to be updated. I even put in a new password thinking that was the problem. Can someone please help me. This has been going on for two weeks.

Hello Priscilla43,
The following article provides tips and suggestions that can help restore your connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

How do i update an existing XML File?

Hello, I have the following xml file gps.xml:<?xml version="1.0"?>
<!DOCTYPE gps SYSTEM "gps.dtd">
<gps>
   <latitude>43.00000</latitude>
   <longitude>-83.00000</longitude>
</gps> I already have methods written to get the values. But how can I change these values and update the file to reflect these changes?
thanks for your help!

Hi, I already have this following code. I would just like to add a method to it to update the existing XML file with different lat/lon coordinates. Could you please help me out with it? thanks
import java.io.*;
import java.io.PrintWriter;
import java.net.MalformedURLException;
import java.net.URL;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import org.xml.sax.*;
public class Gps implements java.io.Serializable {
    private double latitude_;
    private double longitude_;
    public Gps(Document doc) {
        setup(doc.getDocumentElement());
    public Gps(String uri) throws IOException, SAXException, ParserConfigurationException {
        setup(uri);
    public void setup(Document doc) {
        setup(doc.getDocumentElement());
    public void makeElement(Node parent) {
        Document doc;
        if (parent instanceof Document) {
            doc = (Document)parent;
        } else {
            doc = parent.getOwnerDocument();
        Element element = doc.createElement("gps");
        int size;
        URelaxer.setElementPropertyByDouble(element, "latitude", this.latitude_);
        URelaxer.setElementPropertyByDouble(element, "longitude", this.longitude_);
        parent.appendChild(element);
     public Document makeDocument() throws ParserConfigurationException {
        Document doc = UJAXP.makeDocument();
        makeElement(doc);
        return (doc);
    public final double getLatitude() {
        return (latitude_);
    public final void setLatitude(double latitude) {
        this.latitude_ = latitude;
    public final double getLongitude() {
        return (longitude_);
    public final void setLongitude(double longitude) {
        this.longitude_ = longitude;
   public final void updateXmlFile(double latitude, double longitude) {
     // something???
    public final void updateXmlFile(double latitude, double longitude) {
        this.latitude_ = latitude;
        this.longitude_ = longitude;
    public String makeTextDocument() {
        StringBuffer buffer = new StringBuffer();
        makeTextElement(buffer);
        return (new String(buffer));
    public void makeTextElement(StringBuffer buffer) {
        int size;
        buffer.append("<gps");
        buffer.append(">");
        buffer.append("<latitude>");
        buffer.append(Double.toString(getLatitude()));
        buffer.append("</latitude>");
        buffer.append("<longitude>");
        buffer.append(Double.toString(getLongitude()));
        buffer.append("</longitude>");
        buffer.append("</gps>");
    public String toString() {
        try {
            return (makeTextDocument());
        } catch (Exception e) {
            return (super.toString());
}

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

When we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

Click here and ask the iTunes Store staff for assistance.
(108048)

Adding Updates To Existing Deployment

Similar Messages

Maybe you are looking for