Addition of Field Quantity in Confirmation of Goods

Hello Experts
We are implementing Self Service Procurement, Classical Scenario.
During the Confirmation of Goods in Self Service Procurement, we need an additional field 'Quantity in Delivery'.
We used SAP Note 672960 to display the field at the Screen under Item Level tab, however, we are getting a dump which says u2018Field symbol has yet not been assignedu2018. Along with that we are not able to get the value for this field.
Please help to get the dump corrected and to find a way to fetch the value for this field.
Thanks
Gaurav Giroti
Field symbol has yet not been assigned

Hi Gaurav,
Please check whether you have added the same custom field in the structure INCL_EEW_PD_ITEM_CSF.
Please go through the following blog to find the steps involved in adding the custom fields.
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
Hope this helps.
Thanks,
Pradeep

Similar Messages

Additional field in Network Confirmation

Dear All,
Is it any solution to add another field in network confirmation ? CN25 .
Please advice.
CHeers,
Nies

Hi Nies,
What kind of additional information they want to record? Please be more specific.
There is a Text field, you can use that, other wise long text option is also there. But if you use the long text , it will not appear in the std. reports.
Regards,
Praveen.

Transfer of Z field of Confirmation of Goods to ECC

Hello Experts,
We are implementing Classic scenario of Self Service Procurement.
In confirmation of goods we have created a Zfield at Item level. Which is a standard field in R/3 MIGO.
We want to transfer this field in R/3 MIGO. How can we do it? Please guide us.
Note: Though its a standard field in R/3 but its not available in IDOC MBGMCR03.
thanks in advance.
Aakash.

Hi,
The Function Module which creates the confirmation IDOC to be posted from EBP message type MBGMCR is IDOC_GR_CREATE. You can find the structure and the fields in the FM which will be passed on the standard IDOC message type for the same. Inorder to accomodate custom fields you need to enhance the FM mentioned above as well as the message type MBGMCR in EBP and R/3.
Further remember you need to enhance the FM in R/3 BAPI_GOODSMVT_CREATE for accomodating the custom fields. Further as of Release ERP2005, you have the option in the BAPI_GOODSMVT_CREATE to use a BAdI to recognize customer-specific source code using an enhancement implementation.
Regards
Anirban

Fields in Creation of free goods VBN1

hi everybody,
Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
<b>Please dont copy paste anything form SAP help....I read that one......</b>
I would appreciate if u explain with your sentence..
Will reward point if it helps.
Ghassan

Hi Gafoor,
Material
Material, for which free goods is to be
granted
Minimum quantity
Minimum quantity for which free
goods can be granted
From
Quantity of sales material
FGQ--- Quantity unit of free goods material
Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
AQU - Quantity unit of the free goods additional quantity
Rule - Calculation rule
Prorata
whole units
unit related
D -- Delivery controlling - it tells how you can manage the delivery of free goods with respect to the main item ordered.
Additional material - Additional material (only available for entry in exclusive free goods)
Hope it helps. Please reward if helpful.
Thanks & Regards
Sadhu Kishore

LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse

Subject: LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse and not accounting for the year 2008)
Problem:
we must add the cost of goods of the raw material (for which was made a check invoice) of the costs, which are arising and charged by different suppliers (transport, freight, insurance, etc. ..). These are already included in FI with fb60.
The result should be:
- From the consignment of goods entering, add (only in Warehouse (STOCK), NOT IN ACCOUNTING ') cost accessory
- Do not change the quantity
- Having the total cost of stock
- Exploiting the average cost to FIFO must consider the total cost after additional adjustment
Example:                                                                                data
ME21N: purchaise order No. 321 = article 1000kg a price of u20AC / kg 2.30               01/07/2008
MIGO: goods receipt PO confirms price quantity x (u20AC 23,000) batch 298                      07/07/2008
MIRO(enter incoming invoice): Check invoice OK per (u20AC 23,000) batch 298           07/08/2008
Invoices received for costs Accessories:                                                                08/08/2008
FB60: transportation bill on all'purchaise order above cost u20AC / 0.11 kg
0.11 * 1000kg = 110 recorded in cost and accounting of stock.
In accounting, the cost has been reported, in warehouse I need to reverse (add) u20AC / kg to 0.11 initial cost of u20AC / 2.30 kg without adjustments in general accounting, but only in warehouse value and not in the quantity.
So in the end I should have:
batch n° 298 - kg 1000 at a cost of u20AC 2.41 (2.30 +0.11) for the year 2008. How should I do?
thanks

Thomas,
I presume that your client has activated 'Revenue Recognition' component in SAP.
If your client has already activated the RR component, they may be aware that the activation is unreversible.
Recognition of costs in a deferred revenue scenario requires some customization effort but definitely do-able. It is not falling within standard SAP.
I worked on scope of one such project but it did not happen unfortunately.
Can you please post your regular updates in this forum?
All the best.
Thanks
PS: I am not an employee of SAP AG and by answering questions, I am not getting any monetary benefits anywhere. I am answering questions here in my spare time for recognition and the points awarded, which gives me a sense of self-satisfaction. Awarding points is also a way of saying thanks and it will encourage me to answer more questions and share my knowledge and experience

Which table field I can confirm if the PO has done invoice receipt

Hi,
From which table field, I can confirm the PO has done invoice receipt. and in case of that with reference a PO, I have done the IR, but it was reversed, which means PO has not done invoice receipt.
For this case, I don't want to read table EKBE to retrieve the invoice number, the read table RBKP to judge if there is a reverse IR for it.
If there any status table field which indicate if the PO has done invoice receipt.
Many thanks,
Aries

Hi Raj,
For invoice receipt and credit memo, EKBE-BEWTP is all set with 'Q', so if there is reversed invoice. Also you can retrieve data from EKBE. But actually the PO also needs a invoice receipt. So it can not meets the requirement.
Regards,
Aries

Confirmation of goods with "Approved" Status

Hi All,
We are at SRM7.0 and working on extended classic.
After performing confirmation of goods receipt in SRM, the status is still showing as "approved" and not "posted in backend".
Kindly let us know how to reprocess these confirmations in SRM system.
Regards
K Gp

Hi Masa,
The document status in BBP_PD is showing as I1022 (Inactive = Blank).
There is no entry with status "Currently being transferred" in Status section in BBP_PD for this confirmation.
Checked in RZ20 tcode and didn't find any error related to this.
I tried executing the FM - BBP_PD_CONF_TRANSFER and BBP_PD_CONF_TRANSFER_V2. But no success.
If there is a way to process this confirmation again then pls let me know.
Regards,
K Gp

Disable Customer-Material Number field during VL02n before post goods issue

Hello SAP gurus,
I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
Will it be possible to disable the field without having to post goods issue first?
Thanks in advance.
Jayson

I think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.

R12: Disable Field Quantity and Unit Price in Line Item (AR)

Hello,
Is there a setup in Oracle Receivables - Transactions where I can disable the field "Quantity" and "Unit Price" on the form for line item?
I don't have Order Management nor Inventory setup in this environment.
Note: In AP invoices, these field are disabled.
vik

Hello.
I don't think that is possible because the system uses those fields to calculate the Amount field, which cannot be filled in directly.
Octavio

Not able to see the additional information fields in OIE

Hi,
After applying some patches in OIE, the additional information fields in expense report are not visible.
In Internet Expenses setup and Administration, these fields are set as 'Required'.
When we try to save the expense report, it is throwing an error that these fields are required.
But these fields are not visible to enter the information. Is any setup required for the same ?
Please advice.
Regards,
Manjusha.

Hi,
We have already bounced the apache and checked.
It is still the same.
We noticed just now that it is working for some Operating units.
Is there any way to find out what is missing in the required operating unit?
Regards,
Manjusha.

Quantity invoiced greater than goods receipt quantity

Hi guru's
               I am getting an error " Quantity invoiced greater than goods receipt quantity" while posting invoice in MIRO for excise duty clearing for Import PO.
Actually Total Quantity is 9900 kg. Out of which for 3300 kg, Excise duty is cleared, GRN done, Invoice posted.
But when i try to post Excise duty for the next 3300 kg's, this error is coming for line items 3 & 6.
please help me.

Hi , thanks for u reply.
GR based invoice verification is not checked for the PO
Yes this a import PO of india involving excise and we are you posting the excise as delivery costs.
First we posted the customs duty invoice (MIRO) for 3300 qty and posted the GRN (MIGO) and also the Vendor invoice for the 3300 qty (MIRO)
Now we are trying to post the customs duty for the second lot of 3300 qty in MIRO. The entry is a below.
        Amount          quantity                                Condition type
1     1,949.00 -     3,300      KG -        Sec ECESS on CVD        (J1CV)
2     86,400.00 -     3,300     KG -     Add. Customs duty      ( JADC)
3     135,986.00 -     3,300     KG -     IN Basic customs       ( JCDB)
4     194,913.00 -     3,300     KG -     IN CVD                  (JCV1)
5     3,898.00   -     3,300     KG -     Educational Cess On     (JEDB)
6     3,367.00      -     3,300     KG -     Customs Edu. Cess       (JECV)
7     6,734.00 -     3,300     KG -     SECess Customs Duty     (JSDB)
Now i am getting the error for Line items 3, 6 & 7.
regards
satish

Preventing additional component consumption after final confirm in PM Order

Hi,
I am trying to block the consumption of additional components after the final confirmation in a PM order, this is causing erroneous component consp. especially in orders with multiple operations.
The user may choose a confirmed operation while recording a component, system gives an error but it does not prevent the recording of that component, I want the users to get an error and stop there in such a case.
I hope I made myself clear, thanks in advance
IW32 Screen: https://picasaweb.google.com/koray.tulumen/Paylasacaklarim#5707123654338971234

OK once more I thought I should add screens to better tell what I was trying to ask, I could not do that with the old forum layout. Anyways, could I get that result (in the screens) thru customization. There have been other comments relying on Orders' user statuses but with multiple operations they are not usable, every operation is confirmed individually and order status does either let or deny material movements thru the whole order (all operations)
Here are the screens, thanks again.

Sales order quantity gets confirmed Automatically

Dear All,
I have make to order Scenario. i have done all setting required for MTO.
however i create sales order my order quantity gets confirmed automatically. same time there is not stock available for material.
plz suggest how to stop confirm qty. in sales order?
Thanks & Regards
Ratish

Hi Ratish,
Please check the configuration settings in the IMG for Availability check.
You check have maintaining availability checking group 01 or 02 in the Material master.
Have you assigned Checking rule AE -SD order; make-to-order stock for checking group 01 or 02 in the IMG
Spro>sales and distribution>Basic functions>Availability check and transfer of requirements>Availability check>Availability check with ATP logic/Against planning>Carry out control for availbility check.
I hope it will help you,
Regards,
Murali.

Additional text field in Infoset deleted but not reflected in field selection in Query

Hi,
I have deleted an additional text field in infoset. It was used in one query.
Even in the query it is deleted, but when in field selection screen i am not able to delete.
If i try to execute the query, I get dump (syntax error) saying in field type(additional field) doesnot exist.
Can anyone pleassseee help me in this.

Hi San,
I am trying to understand. How could you separately delete an additional text field associated with a main field?
Jogeswara Rao K

ESS portal: Hide additional info field in release working time screen

Hi,
I need to know how can i hide 'additional info' field in the release working time screen?
I know i would use personalization but don't know the way to do that.

it will be shown in header only in release application, let me explain
In the time recording application, when you enter a record and click
on review, the additional info columns shows the text. This works
because the data is entered by the user and the entered record is
mapped to additional info column.
In time release application, all the records from database are retrieved
and displayed. The user does not enter any data. Hence in this case it
is not possible to map the records to text in the additional info
column. The Error/Warning messages are displayed in the top of the list
with detailed information. We feel the information displayed is
sufficient for the user to take necessary action. Usually in the release
application, there would be lots of records. Displaying text in both
additional info column and also at the top of the list is not a feasible
solution.
Technically it would be difficult for us to change this behavior in the
standard application.
we have new application in EHP5.
Edited by: Siddharth Rajora on Mar 9, 2012 7:10 PM

Addition of Field Quantity in Confirmation of Goods

Similar Messages

Maybe you are looking for