Additional line item for Exchange rate gain / loss

HI,
We ahve three currency as Main currency (INR), group currency (INR) and Hard currency (USD).
When we pay to vendor or received from customer, system generate additional line item for Exchange rate gain / loss with Rs. Zero . But transaction is in INR. But it has value in USD as USD 0.01.
Please suggest.
Regards,
Harshal

Hi,
I got your point.
Its a standard behaviour as part of parerral valuation with addtional local currency.
Please make sure that the below are set in your system.
1) in OB22, for your company code, for the HARD CURRENCY--The source curr must be Translation taking first local currency as a basis
2) For every foriegn currency you use, you maintain the exch rates in OB08 with Foriegn Currency 2 Local Currency combination always. And at the same time make sure that there is no opposite combination rates for the same.
(Like 1 USD = 50 INR...1 GBP = 80 INR....1 EUR = 60 INR only)
These may avoid most of the cases where 0.00 LC value lines during clearing.
Regards
Srinu

Similar Messages

Settings for exchange rate gain/loss

In our config, for exchange rate gain /loss between ex rate in bill of lading and ex rate of actual payment , system passes two entries at the time of clearing advance and invoice in f-44. One entry is for gain and other for loss , net effect of the entries is either gain or loss . We wish to change the settings so that syatem shall pass only one entry be it gain or loss. How to achieve this??

Dear,
in my opinion the issue You're facing is due to the split activation for exchange rate.
Usually due to different account assignment in open item, the exchange
rate difference items are split. Check the table V_FAGL_SPLIT_FL2.
I hope this helps.
Mauri

Exchange rate gain /loss is not posted in the contract

Hi Sap People,
Exchange rate gain /loss is not posted in the contract(cashflows). This is w.r.t SAP Banking Module.
The open items are posted with a certain exchange rate in the contract at the time of disburesment,while clearing thru FF68(incoming payment) with a new exchange rate the items
are cleared with the same exchange rate and the Exchange gain/loss is posted as zero.
Regards
Ravi

Hi,
Check the exchange rate type for the disbursement. It is M for FF68. Check in configuration the exchange rate type. Also check the exchange rates maintained in OB08 for this exchange rate type and confirm if there is any difference.
Is it Loans module?
Regards,
Ravishankar

Exchange rate gain/loss during F-28

Hi
we have following secnario:-
1. company code A with local currency AED and group currency USD
2. company code B with local currency USD and group currency USD
now invoice posted in both comapnies and accordingly payment received as follows:-
1. Company code A (local currency is AEd) - invoice posted in local currency but payment received in USD
2. comapny code B (local currency is USD) - invoice posted in local currency but payment received in AED
system behaviour:-
1. comapny code A for which local currency is AED but payment received in USD - system post exchange rate gain/ loss
2. company code B for which local currency is USD but payment received in AED - system doesn't post exchang
I am not able to understand this behaviour as system configuration is same (as COA is same for both company) for both company and accordingly rate is maintained in OB08.
please share your viewpoint on this.
Regards
DD

Hi Kiron
Thanks for response and link.
But the information given in the link is not my case. in my case system dertermine the correct GL but the problem is its happening in one company code but not in other.
for both company code setting is same for OBY6, OBXL and tolerence limit.
Please revert
Regards
DD

Exchange Rate Gain/Loss of Incoming Payment

We are using the SAP BO 2005 A. The system could not post the exchange rate gain/loss transactions correctly. Explain the problem faced in below.
The local currency is in Euro.
The BP currency is in USD.
The invoice is created in USD 1000 with,say, exchange rate 0.64.
The incoming payment is received in USD with, say, excgange rate 0.66.
If the incoming payment is received in USD 1000, then, the system will post the transaction with excgange rate gain in local currency correctly as below:
Dr. Cash 660
Cr A/R 640
Cr Exchange Gain 20
But if the incoming payment is first received partially, say USD 500. Then, the system will not calculate any exchange gain. The transaction will be like:
Dr. Cash 330
Cr. A/R 330
In the next(i.e. the final) USD500 incoming payment receipt, the system also will not post any exchange rate gain. The 2nd transaction will be still like:
Dr. Cash 330
Cr. A/R 330
Could this a bug in the 2005 A?
Could this bug be solved by any patch of 2005A or in 2007A?
Is there any work around solution for this?
Thank you all in advance.
Jack Lin

Hi Jack,
enabling partial reconciliation is one of the major enhancements in version 2007 A & B. It works in all localisations.
You will find a lot of info on the 2007 landing page here:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics -> 2007 Landing Page
On that landing page you will find:
"New Single Reconciliation Engine
A single engine reconciles the difference and eliminates the previous reconciliation issue. More "
-> Click on 'More' & be redirected to the reconciliation landing page.
All the best,
Kerstin

Exchange rate gains/loss and cash discounts vs document splitting

Dear all,
I am facing the following problem. My customer wants to do the following:
-Realized and unrealized exchange rate differences regarding accounts receivable has to be booked on the same profit center that the invoices was book on when they were created.
-Realized and unrealized exchange rate differences regarding accounts payable has to be booked on the same profit center that the GR/IR account (offseting entry for accounts payable when receiving material vendor invoice)
-Cash dicounts granted must be booked on the same profit center that the GR/IR-account (when registering the invoice) when doing the payment of vendor invoices in f110.
Could this be received through document splitting? Anyone that knows what settings I have to do?
Best Regards, Åsa

Hi
As for your query...When realized loss/gain in that double click on line item you can update profit center.
Same for cash discount granted.
if you ask for document splitting assign Extended document spliting scenario.
it only work for profit center spliting.
clear
Regards
prakash

Line item wise exchange rate in sales order and same in billing

Hi,
The client requirement is that to have different exchange rate at line item level in sales order, for multiple sales order, we have different exchange rate in the line items wise, we do the collective billing through VF04. System is picking in the billing document, but not in the accounting document.
The accounting entry should be posted separate exchange rate wise. How to map the same.
Can anyone throw light on this issue.?
Regards,
Satya

Go through this thread
Difference in Billing Exchange rate(VBRP-KURSK) w.r.t OB08
G. Lakshmipathi

Line item wise exchange rate differences in GR

Dear All,
Client does one GR in USD as document currency on a particular date and posted the transaction, while making the conversion to local currency INR system calculating the total line item values correctly as per the exchange rate maintained in the table but when we calculating line item wise amounts, it showing differences to the maintained rate.When i checked for the material master, price control maintained as V. Is tht when doing GR system recaluclating the values in material master and if it so how this much differences showing for each line items...
Pls guide me on this issue...
Regards,
Balaji.c

Dear All,
Anybody can guide me on this issue, awaiting for ur reply at earliest...
Regards,
Balaji.c

Exchange Rate Gain Loss Error

Dear Experts,
I am stuck in a very serious problem
In import purchase Order for raw material we have configured a condition for import duty.
Now in current scenario the import duty has been invoiced before goods receipt there is a minor difference in amount invoiced and amount entered in purchase order.When the receipt is posted for this purchase order an abnormally high amount is posted into exchange rate difference account which is charged to material.
This makes the moving price of material very high.
The currency for purchase order is Dollars. We have maintained a conversion in FI table and purchase order as well.
Please suggest as to what is causing this abnormally high amount to be posted in exchange rate difference account.
Regards,
Sohaib

It is a condition defined in Purchasing all the as Import Duty and calculation type is Fixed Amount.
This condition is used in import purchase order (PO currency USD). The invoice for this condition is posted in local currency which is PKR.
When Goods Receipt (105) is posted for this purchase order system doesnot convert the amount invoiced into equivalent PKR according to exchage rate specified in OB08. All amount in PKR is taken into USD with exchange rate equivalent to 1 and gain loss from this conversion is charged to material. e.g 314079 PKR is posted as 314079 USD and Gain/Loss which amounts to 27 million is charged to material. This makes MAP of material equivalent to 20000 PKR rather than 4000 PKR.

Input & System exchange rate difference make additional line item as different version in COEP

We posting cost for WBS as foreign currency.
But posted exchange rate differ system exchange rate.
(posting is made by web system and daily exchange rate update is missing in posting date)
In table COEP, additional line item was created as version 9 (PCA valuation version)
and only have transaction currency amount (COEP-WTGBTR)
that amount logic is below
(1) FI input exchange rate              9.8599
(2) system exchange rate               9.7841
(3) Input JPY                                 676,450
(4) Translated KRW (Input rate)      6,669,729 = (1) * (3)
(5) Translated KRW (system rate)   6,618,454 = (2) * (3)
(6) Diff                                          51,275      = (4) - (5)
(7) Diff translated JPY(system rate) 5,241        = (6) / (2) ==> COEP Version 9 transaction currency amount.
why this amount is created as Version 9
and any effect comparing to same input exchange rate & system exchange rate?

Hi,
I got your point.
Its a standard behaviour as part of parerral valuation with addtional local currency.
Please make sure that the below are set in your system.
1) in OB22, for your company code, for the HARD CURRENCY--The source curr must be Translation taking first local currency as a basis
2) For every foriegn currency you use, you maintain the exch rates in OB08 with Foriegn Currency 2 Local Currency combination always. And at the same time make sure that there is no opposite combination rates for the same.
(Like 1 USD = 50 INR...1 GBP = 80 INR....1 EUR = 60 INR only)
These may avoid most of the cases where 0.00 LC value lines during clearing.
Regards
Srinu

Exchange rate gain or loss in Payment proposal

Hi,
Is there a way where we can show the amount of exchange rate gain or loss realized on the detailed screen of the payment proposal..
Thanks,

Not possible in F110.
You can check unrealized differences if you want to in FAGL_FC_VAL
Realized arises only at the time of documents clearing.
Rgds
Murali. N

Additional Data On Actual Cost Line Item for Orders. Possible?

Is it possible to show on display of Actual Cost Line Item for Orders the cost center for both settled and not yet settled? As for now we can only view the cost centers that are already settled. Please see attached file for a snap picture of the display.
Thank you in advance.

Hi,
How this would be possible? If the document is not yet settled, then cost centre is unknown. Of course, it is stored in settlement rule, but no actual posting was done yet.
Regards,
Eli

Open Item Clearing: Exchange Rate Differences

Hi guru
I have one account 100 and in fbl3n I have the following posting:
document number 1: account 100--> Amount 2000$ in S, Exchange rate 0,63
document number 2: account 100--> Amount 2000$ in H, Exchange rate 0,70
Then I have cleared this account but in the posting I have 3 lines item:
1 the account : amount 20 in S
2 passive difference: amount 100 in S
3 active difference: amount 120 in H
The user asked me a posting with two lines items:
1 the account: amount 20 in S
2 active difference: amount 20 in H
He would like to see only the difference (120-100)
is it possible?
Thanks
Edited by: Rossella Fiorella on Apr 20, 2011 1:26 PM

Hi,
you have to create two gl accounts for exchange loss and exchange gain, after that wat i mention below configuration is required .
Define valuation methods:
. (Transaction Code OB59 ).
Select new entries button
Valuation Methods:
Description: FC Valuation Bank Selling for
Document Type: SA
Debit balance exchange rate type (B) (Bank Selling)
Credit balance exchange rate type u2013 B (Bank Selling)
Select determine rate type from account balance
Select save button
Prepare automatic postings for Foreign Currency valuation
Transaction code OBA1
Double click on exchange rate defining using exchange rate key
Give your chart of accounts:
Enter
Exchange rate difference key:
Expenses account:
E/R (Exchange rate) gain account:
Save
Regards
Praveen P C
Edited by: Praveen Chirakkel on Apr 21, 2011 7:11 AM

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Actual Line Items for Special Ledger

Hello,
I wrote an report to show FI-SL balances.
In addition to that, now I need the actual line Items for them (table TRACTSLA)
I've found a transaction called KE5Z, which is for PCA line items.
Is there also such a transaction for special ledger line items, which I can reuse?
Thanks in advance.

Tty KE24, KE25.
Regds,
Anil

Additional line item for Exchange rate gain / loss

Similar Messages

Maybe you are looking for