Additional value for "Priority" input box

Hi Gurus,
In the Create support message on the satellite system the defaults for priority entry only have 4 value in it. How do I add in more values for example u201C5 emergencyu201D
Please guide
Thank you
Br
Saravanan Ramasamy

Hi,
Iu2019m not so sure in which system I should perform the steps you mention so I have followed you steps in both SOLMAN system and also in the satellite system and the result as follows
In both systems the new entry for the priority does not appear when I try to create a message using the path u201CHelp-->Create Support Messageu201D
In SOLMAN system the new entry appears when I use the TCODE u201CNOTIF_CREATEu201D to create the support message. But this TCODE is not available in the satellite system.
Please guide me on this.
Thanks

Similar Messages

I using an event structure for an input box and also for hardware input

Hi there!
I have many input boxes and display boxes on my user interface and i have a case for it in the event structure. If the user changes the values of the input boxes, the particular event case writes this new value to the hardware. However, in the timeout section of the event structure, we read the inputs from the hardware and we set the value for its related display object. Within the timeout section i set the value for the related user interface display component, by making use of the property node value.
Furthermore, for most of the display components, i have a event case for a value change associated with it. In that event case, i check for range errors and so forth.
My assumption was that when i read the value in from the hardware and set the property node value, the user interface component's value will change and it would then trigger the event of the value changed for that component.
My assumption worked to the point of updating the component's value, however, it did not trigger the event for the value changed for this component.
Please advise me on how to achieve what i wish to.
Thanks.
Regards,

Local variables are actually much more efficient than property nodes as far as execution speed goes. Take that same VI and delete the property node and instead write to a local variable inside the loop. You'll see the speed nearly identical to writing directly to the indicator. But note that variables also cause a copy of the data to be created. So if you're just using the "Value" property, you're much better off using a local variable. But don't use both at the same time. If you are reading/writing other properties when you update/read the value, you might as well use the value property.
Sometimes you can't get around using either variables or property nodes. Initializing controls to saved values from an ini file is one example. But in this case, they are only written to once as the application starts so the performance hit is negligible.
One thing you can do is store values in a shift register as they are read and pass this through your application so the last value read can be accessed from anywhere. You can even create a cluster that runs through the shift register to hold several values in a single register. This can be expanded a bit farther to create what's called a Functional Global. This basically a subVI with a While loop that only runs once on each call. It has a shift register to store data and a Case structure to Read or Write data into the register. There's a pretty good example that ships with LabVIEW showing how these work. Open the Example finder and search for "Functional Global Communication". This example shows how to use them to pass data between two independent loops, but they work just as well in a single loop application.
One of the big advantages of these Functional Globals over the standard LabVIEW Globals and local variables is that you can add cases to manipulate the data in addition to just storing it. Also, since it's a subVI, access to the data is protected to one caller at a time whereas variables can have multiple reads and/or writes at the same time. This can cause race conditions.
Hope that helps a bit.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Additional values for further F4 help

Hello all,
In the current IAC WSSA_ENTRY (sales order) the parameter ~sources contains all values for the F4help; i need additional values for further F4helps;unfortunatly the parameter is fully occupied; setting a second parameter ~sources in the service is not possible.
Is there any possibility the add addionally values to the parameter ~sources? Can I add the values in the handler (ICF) to any enhancement, exit?
Thanks & regards,
Kurt

Hello Kurt,
Sorry, my suggestion is to add your customizations to a copy of the one of the existing ~sources. Use an include or something like that. It looks like the maximum length is 132 for the value of ~sources.
Edgar
Edited by: Edgar Chuang on Nov 25, 2008 12:38 PM

How to set initial value for a dropdown box?

Hi,
Within Netweaver 2004S (BI 7.0) we use integrated planning. In one of our applications we want to use a dropdown box (created with the WAD) to make a selection possible for a characteristic.
We set up a pre-query to fill the dropdown box (via data binding CHARACTERISTIC_SELECTION) with the proper values. This works fine.
We pass on the choosen entry (via command SET_VARIABLES_STATE) to a second variable that is used in another query. This command is triggered after the user makes a selection in the dropdown box. Also this works fine. After selection of one entry, the output of the second query is limited.
We have the following problem: the first time a blank selection entry is added to the dropdownbox and that no values are passed on to the second query. Because it seems that the user first must choose an entry.
What we would like to do is that one of the found values of the pre-query is automatically selected in the dropdown box and passed on to the second variable (to limit the second query).
I give you an example:
The first query delivers value A, B, and C for the characteristic of the dropdown box.
The first time the dropdown box showns an empty entry, and three additional entries A, B and C. The second query shows all results, because the second variable doesn't receive any value via the command SET_VARIABLES_STATE. The command is not yet triggered.
When you select A, B or C, the command is triggered and the second query shows only results for the choosen entry (this is correct). Now the empty entry has disappeared from the dropdown box. Only the entries A, B and C are left.
Is it possible to set up the dropdown box on such a way (or add some script coding around it) that in the initial show for the dropdown box one of the entries is choosen automatically, so that the empty line is not part of the value set of the dropdown box and that the command connected to the dropdown box (in our case the SET_VARIABLES_STATE) is carried out automatically?
Please, who can help us with this?
Kind regards and thanks in advance,
Marcel.

Hi,
In BW 3.5,say you want to set default for calmonth.
In order to avoid the ALL option from appearing in the dropdown box,
filter infobject 0CALMONTH for DP1 by any valid value.
In the object Data_provider include the lines in Bold:
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DP1"/>
<param name="QUERY" value="WORKSHOP_CALMONTH_DROPDOWN"/>
<param name="INFOCUBE" value="0D_SD_C03"/>
<<b>param name="FILTER_IOBJNM" value="0CALMONTH"/>
<param name="FILTER_VALUE" value="200401"/></b>
DATA_PROVIDER: DP1
</object>
Hope this helps.
Anu.

Filtering based on the value in a Input Box?

Is it possible to filter a gallery based on something I enter into an input box?
If so what is the syntax for the command I need?
Right now I am trying Filter(UF_Football_Roster, Number =) and then I have no idea what to put after the equals sign.
Thanks for the help!

Hi Philip,
Yes. Assuming Number is a column in the table_UF_Football_Roster, and assuming you added an input text visual named InputText1, here is the syntax:
Filter(UF_Football_Roster, Number = InputText1!Text)
If the value in the Number column are stored as numbers you may need to use the function
Value:
Filter(UF_Football_Roster, Number = Value(InputText1!Text))

Initial value for a dropdown box

Hello all,
I have created a web template in the WAD (BI 70) with a dropdown box on a characteristic. A chart is displayed based on the query result. My query is built on an infoset.
My problem is to populate the filter with an initial value and still let users change the characteristic value in the dropdown (all values for the characteristic is not acceptable in the context) . Also, I don't want the variable screen to show up.
What is the best approach to achieve this?
Thanks,
JL

In Query Designer you put in your default value in the area to the right in the first pane..
If you put it on the left hand side, the filter will not be changeable.
Hope this helps.
Can give more presise answer if you need it.

How to set default value for drop down box in jsf

Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AK

Hi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK

What are the possible values for a check box?

I'm trying to fill a pdf with a asp.net web form. I'm getting the text boxes filled ok, but I'm having trouble setting the check boxes. I am testing to see if a web form check box is checked. if it is, I tried to set the pdf checkbox value to "on". But this doesn't seem to be right.
My asp.net code is like:
If CheckBox1.Checked Then
af.SetField("pdfbox1", "On")
End If
Any suggestions?
Thanks

The value is the value entered into the "Export Value" option when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values for the same named check boxes. And if you know the 'widget' of the check box, you can use 'isBoxChecked' method to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript doucmentation.

How to Bring the Quarter Period and Previous Month Value for given Input

Hi to all,
      I want bring Quarter Period and Previous Month value for the given Input. Plz help me on this
Example :
Input : 06.2008
Output:
Input     Prev.Month Quarter 1   Quarter 2   Quarter 3
06.2008 05.2008      03.2008     12.2007     09.2008
12.2008 11.2008      09.2008      06.2008    03.2008
Is there any Standad Exit for this or we have to write coding ?
Regards,
Saran

Hi,
You can solve this by using Replacement path.There you have a option offsets.Here give the current period.Based on that give the number which previouse month you suppose to want.
I think this 'll help you
assign points if this helps
Regards
JT Goud

X values for y input on graph

hello,
can some one help me, i am trying to find the intercept points on a plotted graph so that if i input a y value i can get the corresponding x values of the plotted line which intersect at plotted line. please see attatched VI.
to explain again what i am aiming to do is essentially (this may be another way to do it) is postion two cursors in the graph and get the x and y vaules although i would like to specify a y value.
also in the attached file i have set a property node which displays the x value for a y input but i cant do the same for both cursors, could i also get some help on that
Attachments:
CURSOR TEST2.vi ‏16 KB

here's a snippet showing you a possible solution:
It has one problem, if the Y-values are not increasing it won't find a correct match.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Can we add form validations in edge animate for particular input box

Hi Everyone,
I have created an animation which includes some forms to be filled by the user. For this I have created the form in which i used the j-query input box inside the edge animate. Its appearing perfectly as it should be. Now I want to validate this input box. For example, I have to put some numeric figure in the text field which is limiting to 100. Now how I can control the figure so that user can'nt put 101 and if in case user presses 101 on keyboard, the 100 appears in the text field by default. I mean to say, it should not exceed to 101.
I am a new bee for j-query and validations, so please help me out in this.
Regards
Vikas Sharma

Hi Rupa,
Yes it is possible.You want to make include both drop down and input fiels for particular column.Yes you can achieve this by using cell variant of column,using this you can make some cells are drop down and some are input enabled.
We have a stanard program WDR_TEST_TABLE,check the view VARIANTS_STANDARD in this go to the method WDMODIFYVIEW.
In the above methos they explained how to add cell variant to the column.
Thanks
Suman

Set value for user input in tabular form

Hello all
I have a tabular form wherein I want to set the length of values a user an enter into certain columns.
For an example, column1 should only allow users to input a 5 digit number and no more. Column2 should only allow 6 digits and so on.
Is this something that can be done? and if so, how?
Thank you for any help -Trey

Hi Trey,
APEX doesn't support that out of the box, it always creates a HTML input item with a maxlength=2000. But have a look at the ApexLib Framework which supports a length property for tabular from fields. See http://www.inside-oracle-apex.com/2007/02/restrict-input-length-for-tabular-form.html and http://apex.oracle.com/pls/otn/f?p=44394:54 for details.
Patrick
My APEX Blog: http://www.inside-oracle-apex.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://apexplugin.sourceforge.net/ New!

CUIT is not giving name property value for VB combo boxes

Hi Everyone,
We are testing simple Vb6 controls using CUIT. Using CUIT we can get name property value of Vb6 button control. But for simple Vb6 combo box, CUIT is not showing name property value.
I want to add CUIT assertion for combo box name property value. how can I add ?
For more details please see the image
Regards,
Rajendar..

Hi Rajendar,
Do you record a coded UI test with the coded UI test builder? If so, which item did you record?
>>How can I get combobox.SelectedItem without identifying combo box?
It doesn't mean that we don't identify the control. Generally we use the unique property as the search property to find/capture the control.
Like this blog here:
http://blogs.msdn.com/b/visualstudioalm/archive/2012/02/01/guidelines-on-improving-performance-of-coded-ui-test-playback.aspx
SelectedItems versus
SelectedIndices property
For large number of items, it is preferable to use SelectedItems. SelectedIndices essentially does an Instance search internally, which is slower compared to unique automation property based search. Use SelectedIndices only when
the items don’t have unique Automation properties. And of course exercise caution over changes to the list content.
I think you could get a useful sample here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/a32bc4a6-f562-436d-96a4-a3409b1b3e73/codedui-and-combobox-i-want-to-go-to-the-next-nonselected-item-in-combobox?forum=vstest
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ora_hash - Same hash value for different inputs (Urgent)

Hi,
Trying to use ora_hash to join between tables but i noticed that in some cases, when working on different input value the ora_hash function generates same results.
select ora_hash('oomeroe03|6NU3|LS006P|7884|1|17-JUL-13 13.18.22.528000|0005043|'),ora_hash('GSAHFFXTK|GCQ3|A6253S|12765|1|17-JUL-13 17.26.26.853000|0136423|')
from dual
Output value : 1387341941
Oracle version is 11gR2.
Thanks

Why would anyone limit the hash distribution to three buckets ?
However, one must understand that the default seed is 0. So one input repeated gets the same hash value unless the seed is changed.
SQL> select ora_hash(rn) , rn
2 from
3 (Select rownum as rn from dual connect by level < 11)
4 order by rn;
ORA_HASH(RN)         RN
2342552567          1
2064090006          2
2706503459          3
3217185531          4
   365452098          5
1021760792          6
   738226831          7
3510633070          8
1706589901          9
1237562873         10
10 rows selected.
SQL> l
1 select ora_hash(rn) , rn
2 from
3 (Select rownum as rn from dual connect by level < 11)
4* order by rn
SQL> /
ORA_HASH(RN)         RN
2342552567          1
2064090006          2
2706503459          3
3217185531          4
   365452098          5
1021760792          6
   738226831          7
3510633070          8
1706589901          9
1237562873         10
10 rows selected.
SQL> /
ORA_HASH(RN)         RN
2342552567          1
2064090006          2
2706503459          3
3217185531          4
   365452098          5
1021760792          6
   738226831          7
3510633070          8
1706589901          9
1237562873         10
10 rows selected.
SQL>
Hemant K Chitale

How to set a default value for a input dialog

I use JOptionPane.ShowInputDialog("Input Please");

JOptionPane.showInputDialog("hello", "default");Also, this would be helpful:
http://java.sun.com/j2se/1.4/docs/api/javax/swing/JOptionPane.html

Additional value for "Priority" input box

Similar Messages

Maybe you are looking for