Addon after SP1 PL3

Hi !
I have an addon it loads correctly, creates the menu and i have my message saying that its connected to the company. When i click on my menu nothing appens. Normally it calls a form created my Screen Painter. The addon is acting like if i'm not pressing anything in my menu.
I did recompile with changing the sapbui and sapbob files.
Help please...
Thanks

Well it works like a charm !!!
Sorry for the post, i choosed the sapbobs file version of 2004 when updating my addon.
Thanks

Similar Messages

  • Unable to install any addons after updating to Firefox 7.0.1

    I am not able to install any addons after updating to firefox 7.0.1. Addons are still working. Addons will start to download but will get stuck at 100% download progress.

    What addons do you already have installed? Could be one of them is interfering with the downloads somehow...

  • Updates after SP1

    Hi all
    I am currently deploying an Exchange 2013, and want to update to latest level.
    Normally, they are called CU1 for RTM, CU1 for SP1 etc.
    But does the list reflected here:
    http://technet.microsoft.com/en-us/library/hh135098(v=exchg.150).aspx
    indicate that AFTER SP1 i need CU5 ?! and not as i would expect CU1 for SP1
    Hope for an answer
    Kenneth
    Denmark

    Correct. CU5 is cumulative and after SP1 which is CU4.
    http://blogs.technet.com/b/exchange/archive/2013/02/08/servicing-exchange-2013.aspx
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • "Application failed to evaluate" during OSD after SP1 Upgrade

    Hi,
    Today i upgraded out configuration manager from 2012 rtm to 2012 sp1. The update process completet without any errors but now i'm unable to install application during osd. The first application crashed with the message:
    Installation job completed with exit code 0x00000000
    Execution status received: 16 (Application failed to evaluate )
    in smsts.log
    I know that there are some gotcha's regarding application installation during osd after sp1 upgrade. I already did the following steps:
    - Update the deployment type of the application in my osd task sequence
    - Re-Add the Network Access Account
    - Removed the first application in the task sequence to see if the problem is application related
    - Checked the option "Allow this application to be installed.." in the application properties
    - Reboot my site servers
    I can install application via Software Center without any problems, also the software updates are working normally.
    Thanks in advance

    Hi,
    How are things going? Please let us know if there is any progress.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • XML error when trying to run any report with add/remove programs - worked briefly after SP1 upgrade - no longer works

    I applied SP1 in hopes of fixing the reporting bug as discussed
    here and it did work - for a day or so. Now, I am getting the error again. Not sure what to do. Please advise.
    The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
    There is an error in XML document (1, 301094).
    '', hexadecimal value 0x1E, is an invalid character. Line 1, position 301094. 
    I also get the "report builder click-once application does not exist on the server" - to which I had applied the registry key
    [HKLM\SOFTWARE\Wow6432Node\Microsoft\ConfigMgr10\AdminUI\Reporting]
    "ReportBuilderApplicationManifestName"="ReportBuilder_3_0_0_0.application"
    SQL
    and SCCM are on the same server - which I can get to report server web but cannot create reports from SCCM console.
    Thanks

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    This problem was solved in SP1 if you are still having this problem after applying SP1, then you need to contact CSS directly for support, they will work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Satellite R630 - Driver issues on Win 7 64bit after SP1 upgrade

    Need your help here guys,
    My Satellite R-630 is less than a year old, running a Windows 7 Home Premium on 64 bit. For a while, I have been experiencing BSOD's, which I traced through the Event Viewer to here: http://technet.microsoft.com/en-us/library/dd337789(WS.10).aspx
    This did not lead me far enough.
    Finally, I concluded through other forums that the SP1 upgrade would solve some of the annoying BSOD issues and I launched the download and upgrade. However, on restart, while my laptop seems to have been cured (so far) of the BSOD's, I have issues with drivers for:
    - Sound Card
    - USB Controllers
    - DVD Player
    - Webcam
    - Bus Enumerators
    I have downloaded the indicated Win 7 - 64 bit drivers in each case. I tried installing them first. Nothing happened. I uninstalled the existing drivers, and installed them again. Nothing happened again.
    I figured I must be doing things in the wrong order.
    So I tried installing
    1). the Chip Set Utility (drivers?) first, then
    2). the USB drivers
    3). Sound card drivers etc.
    Nothing is happening still.
    I am running out of ideas here.
    P.S While all the other drivers executed fine when I extracted them from the .zip format, the Sound card driver refused to execute, even though the "run command" box was ticked when the .msi file was run.
    I extracted it into a folder and ran it manually.
    Still didn't help.

    That's where I got things wrong I think. I did not use the windows automatic update, because it kept saying connection was unsuccessful.
    What happened is it identified a component of the SP1 as a "critical update", a 900 mb chunk (listed as windows6.1-KB976932-X64.exe here: http://www.microsoft.com/download/en/details.aspx?id=5842 ) but would not download it. It failed every time. So I went on the windows download centre, looked up for the same component and installed it manually. Right now windows update turned green with the tick and says everything is fine.
    I will try to restore my settings to the former configuration and let you know. I was about to try that last night, but I didn't see any restore date prior to the SP1 installation. I'll try this right now.
    --*Edit:* So system restore isn't working. There is only one restore point that's prior to the SP1 installation. I've tried 3 times already. Every time it tells me that it could not access a file, probably because of antivirus. I use Avira. I disabled it the second time. Still same message. I uninstalled it completely for the 3rd trial, same message again.--
    --So system restore isn't an option. Could it be that I missed a component that would be required for some drivers to work properly after the update?--
    *Edit*: In all my troubles, I forgot an elementary step: run system restore in Safe Mode. Which I did. Now my system is back to before SP1, sound, usb connectivity working. I suppose everything is back where it should be. I'll just wait and see if i get a BSOD again and come back here if need be.
    Thanks guys.
    Message was edited by: 1132nd
    Message was edited by: 1132nd

  • Reporting issues after SP1 to R2 upgrade

    Hi Guys.
    I'm having an issue with reporting after upgrading System Center 2012 Configuration Manager SP1 to R2 CU2.
    For some reason SSRS is not allowing users to logon from a remote workstation. The Reporting node in the Monitoring workspace does not list any reports. The SSRS reporting portal prompts for authentication but does not accept any credentials.  Both
    are accessible when logged on to the Primary Site Server where SQL and SSRS are installed.
    After some investigation I’ve determined that this is a permissions issue and this is where I need your combined wisdom. At first I thought this might be as simple as adding the proper RBAC permissions but if it was permissions issue for my account then
    why would it be accessible from the site server but not a remote client….
    Some techy info for you.
    With the R2 Upgrade a few new permissions were required for the SSRS service account in order for RBAC to work with Reporting.  The service account has been added to the Domain Built in group “Windows Authorization Access” and has the “Read TokenGroupsGlobalAndUniversal”
    AD attribute set to “Allow”. These are the permissions Microsoft has listed for the Service Account in the TechNet Library.
    The SRSRP.log has a ton of errors that I believe may be the cause of the problem. The error is “Unable to translate SID [SID for Account] error: [Some or all identity references could not be translated.] SMS_STS_REPORTING_POINT 9/9/2014
    4:51:00 PM 5300 (0x14B4)” which I believe to be a logon failure error. Each time a user try's to authenticate with the site this error is generated.
    So I’m thinking this may be a permissions issue with the Service Account that runs SSRS or the SQL Engine may also require a Service Account.
    At this point I’m thinking the SQL Engine may also require an AD service account, but before I create another Service Account  I wanted to consult the IT Geniuses and see what kind of incite you may have.
    Thanks for your help,
    Gabe

    Hi Guys,
    One of our SQL DBA's was able to resolve the issue. It turned out to be a Kerberos Authentication problem with SSRS.
    Cause :
    The problem  was due to Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In this case there is a mismatch between the destination
    specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
    Resolution:
    1-Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the file rsreportserver.config and save the config file 2-Stop and start SQL server and reporting services.

  • CR2008 will not start after SP1 was downloaded and installed

    Just wanted to post this message about CR2008.  I didn't find a "installation problem" forum, so I'll post this here.
    I have just begun using CR2008.  New install worked fine.  After a couple of days, I downloaded and ran SP1 for 2008.  No problem with the SP1 installation process.
    But when I attempted to start CR2008 after the SP1 install, I received a cryptic error message about not being able to start this or that DLL, etc.
    I rebooted, etc, to no avail.
    So, today I've uninstall CR2008 and I am going to only reinstall CR2008 without the SP1.
    I looked for problem issues on the forums, but did not find much. 
    So I guess the SP1 problem that I experienced is very rare...?  I'd appreciate any links or advice on this.
    Thanks very much,
    Dave

    Thanks for the reply.  Unfortunately, I have uninstalled CR2008 -- everything -- and I cannot reinstall the basic CR2008 package.  It keeps giving me a series of errors and finally the installation is aborted.
    Don't know what I''m doing wrong.  I have sent a request for help to customer service...
    Dave

  • SQL Server 2012 Analysis Services Deployment Wizard broken after SP1

    I have installed SQL Server 2012 SP1, now I cannot edit Data Source Connection Strings anymore in the Deployment Wizard.
    When clicking the button labeled "..." I get an error "Could not load file or assembly 'Microsoft.Data.ConnectionUI, Version=8.0.0.0' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference".
    This happened on two different 2008 R2 servers and local windows 7 desktop, SP1 Cumulative Update 1 does not fix the error.
    Please help!

    I managed to fix it by modifying the Workaround from Microsoft a bit.
    Microsoft Fix: https://support.microsoft.com/en-us/kb/2809127/
    Summary of fix:
    Open the following configuration file in a text editor, such as Notepad, as an administrator:
    <var class="sbody-var" style="box-sizing:border-box;"><system drive>:</var>\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Microsoft.AnalysisServices.Deployment.exe.config
    2. Insert the runtime XML tags after the </startup> tag in the configuration section:<configuration>
    <startup>
    <requiredRuntime version="v4.0.30319" safemode="true" />
    </startup>
    <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.Data.ConnectionUI" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
    <bindingRedirect oldVersion="8.0.0.0-9.0.0.0" newVersion="10.0.0.0"/>
    </dependentAssembly>
    <dependentAssembly>
    <assemblyIdentity name="Microsoft.Data.ConnectionUI.Dialog" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
    <bindingRedirect oldVersion="8.0.0.0-9.0.0.0" newVersion="10.0.0.0"/>
    </dependentAssembly>
    </assemblyBinding>
    </runtime>
    </configuration>
    What i did to make it work:
    <configuration>
      <startup>
        <requiredRuntime version="v4.0.30319" safemode="true" />
      </startup>
      <runtime>
                    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
                                    <dependentAssembly>
                                    <assemblyIdentity name="Microsoft.Data.ConnectionUI" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
                                    <bindingRedirect oldVersion="10.0.0.0" newVersion="8.0.0.0"/>
                                    </dependentAssembly>
                    <dependentAssembly>
                                    <assemblyIdentity name="Microsoft.Data.ConnectionUI.Dialog" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
                                    <bindingRedirect oldVersion="10.0.0.0" newVersion="8.0.0.0"/> 
                  </dependentAssembly>
                    </assemblyBinding>
       </runtime>
    </configuration>
    Instead of redirecting from version 8 and 9 to 10, i reverted it and made sure it uses version 8.

  • SCCM 2012 after SP1 replication link has failed

    Hi guys,
      after install SP1 on SCCM 2012 I have problem with Global Data Replication status and Site Data replication status on P02. Where I have C01 and P01, P02, P03, P04.  P02 is the only one which is broken more. Rest of primary sites have ok
    Global Data Replication status.
    Site P02 is after 1 week from patch console still in Read Only mode rcmctrl.log says: The current site status: ReplicationMaintenance.
    CAS C01 have in rcmctrl.log
    ERROR: Replication group "General_Site_Data" has failed to initialize for subscribing site C01, setting link state to Error.
    Retry for process replication is requested.
    Cleaning the RCM inbox if there are any *.RCM files for further change notifications....
    Rcm control is waiting for file change notification or timeout after 60 seconds.
    No connector role installed
    DRS change application started.
    Site is NOT active, so not calling the DrsActivation procedures on DRSSite queue.
    replmgr.log says nothing special to be mentioned.
    and when I run Replication Link Analyzer on C01 against Link to P02 it says :\
    ReplicationAnalysis.xml:
    Replication initialization is in progress for replication groups EndpointProtection_Site, Medium_Priority_Site, Operational_Data, General_Site_Data, MDM_SiteSpecial, MDM_Site. Found replication groups Replication Configuration that needs to be re-initialized.
    Reason code: ReinitializeSenderDespoolerError. Replication initialization is in progress for replication groups Site Control Data, Configuration Data, Registration Data, Language Neutral, Asset Intelligence Knowledge Base, EndpointProtection_ThreatMetaData,
    Alerts, Group Relationships. "
    Target site P02 is in maintenance mode. Not checking transmission messages sent to queue ConfigMgrDRSQueue. Target site P02 is in maintenance mode. Not checking transmission messages sent to queue ConfigMgrDRSQueue
    Target site C01 is in maintenance mode. Not checking transmission messages sent to queue ConfigMgrDRSQueue. Target site C01 is in maintenance mode. Not checking transmission messages sent to queue ConfigMgrDRSQueue
    so I need to somehow quit this maintenance mode. following this link did not helped me:
    http://blogs.msdn.com/b/minfangl/archive/2012/05/16/tips-for-troubleshooting-sc-2012-configuration-manager-data-replication-service-drs.aspx
    I restarted all these 5 servers with no luck.
    thank you for any hint/ help
    Jaromir
    Jaromir

    in my case in rcmctr.log is visible on CAS and primary site this message: ERROR: Replication group "General_Site_Data" has failed to initialize for subscribing site C01, setting link state to Error.
    but today we moved in this situation and my P02 2nd primary site fall out from maintenance mode and a lot of replication happened but General_Site_data still remain in problem.
    steps taken were: goto monitoring node > database replication > choose link which has problem and on the bottom check Initialization Detail
    you can see which replication Group has problem.
    Then in SQl server management studio we run following command with relevant name of Sites and Replication Group which are affected in my case
      select * from RCM_DrsInitializationTracking
     where replicationGroup = 'General_Site_data' AND SiteFulfilling='P02'
    it will show you status
    then this update query will force that replication group to start replicate(parameter 7):
    we run this many times against same or different replication groups which ahd problems
    update RCM_DrsInitializationTracking set InitializationStatus = 7 where ReplicationGroup = 'general_site_data' and SiteRequesting = 'C01' and SiteFulfilling = 'P02'
     it's still not win but we are moving forward. And it doesn't has to be same issue like you have but it can point you to somewhere...
    J.
    Jaromir

  • Search no longer crawls after SP1

    After upgrading to SP1 my SSA shows the following errors:
    Administrative status
    Running
    Crawler background activity
    The search application 'Search Service Application' on server SHRPT13FEPVWB01 is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.
    Recent crawl rate
    0.00 items per second
    Searchable items
    2,029
    Recent query rate
    0.00 queries per minute
    Default content access account
    The search application 'Search Service Application' on server SHRPT13FEPVWB01 is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.
    Contact e-mail address for crawls
    [email protected]
    Proxy server for crawling and federation
    None
    Search alerts status
    On  Disable
    Query logging
    On  Disable
    Global Search Center URL
    https://innercircle.xyz.org/sites/search/Pages
    I've tried resetting the cache on all 4 servers in the farm multiple times without luck.  I've also tried restarting the timer service, admin service and search service.  I've tried starting search from powershell (even though it appears to be
    running anyway) and nothing seems to get rid of this error.  Search appears to be working on the farm, but not crawling new items and it throws errors when clicking various menu options like content sources, etc.
    This is a production farm, so any help would really be appreciated.  Thanks in advance!

    Hi,
    Please try below mentioned steps:
    1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
    2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
    3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
    5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
    Hope it helps!
    Thanks,
    Avni Bhatt

  • SuiteLinksDelegate Control has [The trial period for this product has expired ] false message after SP1 (BUG)

    After applying SP1 (officeserversp2013-kb2880552-fullfile-x64-en-us) I have got this false error message- The trial period for this product has expired. How to take it off!!
    Here is what's happening now when i click on this message it takes me to sites link and when i click on sites it takes me to one drive for business library. The links have also changed [sites] should be in place of this false message [ The trial for this
    product has expired] . I have Enterprise license and i checked again just to be sure through powershell these are the GUIDs    
    Products
    {9ff54ebc-8c12-47d7-854f-3865d4be8118, b7d84c2b-0754-49e4-b7be-7ee321dce0a9, 35466b1a-b17b-4dfb-a703-f74e2a1f5f5e}
    I have no explanation for this change in SuiteLinksDelegate control. Tried bing and google nobody has reported this yet so looking forward to some guidance and explanation here .
    Regards,
    Anup  

    Hi Anup ,
    According to your post, my understanding is that you got the "The trial period for this product has expired" on all pages after applying the SP1.
    For your issue, please install the Latest Newsgator (Sitrion) updates:
     Sitrion
    Social Core v4.5.128
    Reference:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/3dad56ee-0447-430c-b57f-24d7395fdeb0/upgrade-farm-to-sp1-gets-me-a-the-trial-period-for-this-product-has-expired-on-all-pages?forum=sharepointadmin
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Outlook 2013 / Outlook 365 crashes after SP1 when opening email

    Hi,
    I already posted this question in the Outlook forum but was referred to this one because I am connecting to Exchange servers:
    I have a frustrating issue with Outlook 2013 (Work)/ Outlook 365 (Home) after the installation of Office Service Pack 1. Outlook starts fine and shows the Outlook Today screen. As soon as I go to my inbox and Outlook wants to show the preview of the first
    email it crashes. The switch /NoPreview lets me go to my inbox but then Outlook crashes when I try to open an email (any email).
    Outlook runs fine in Safe Mode so I tried to uninstall / disable Add Ins (set LoadBehavior to 0 in the registry). No success.
    At work I could fix the issue by uninstalling SP1. But at home Office fails to roll back to a version before SP1 (integratedoffice.exe REPAIRUI RERUNMODE version xxxxxxxxxx). It says I must be online (which I am, of course). Reinstalling didn't help either.
    Windows 7 Enterprise, 64 Bit (Work), Windows 7 Business, 64 Bit (Home). Office 32 Bit.
    Company hosted Exchange Server 2010 (Work), 3rd party hosted Exchange account 2013 (Home), Outlook.com account (Home).
    Creating a new profile with only the Outlook.com account did not fix the issue.
    Outlook Product Stability Diagnostic and OfficeCAT could not find anything. So I don't know what to do anymore. Please help.
    Thanks and kind regards,
    iBlueDragon
    PS: At home I fixed the issue by reinstalling my notebook with Windows 8.1. Now Outlook is running fine again. But still no solution for work.

    Is Hardware Graphics Acceleration enabled?  We're seeing problems with Windows 7 when Aero is enabled - Outlook works fine with basic themes.
    http://www.slipstick.com/outlook/2013/outlook-2013-hangs-due-hardware-acceleration/ 
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • EventID 2001 after SP1 install

    Hi.
    After upgrading to SP1 for Exchange 2013, I keep getting this error:
    Event 2001, MSExchange RPC Over HTTP Autoconfig
    A transient failure has occurred. The problem may resolve itself in a while. The service will retry in 00:00:15. Message:
    Filename:
    Error: Cannot add duplicate collection entry of type 'add' with unique key attribute 'path' set to 'C:\Windows\System32\RpcProxy\RpcProxy.dll'
    'It does not seem to be causing any problems, but it is annoying to have this error log every 15 seconds.
    Unfortunately I do not know anything about IIS, but it seems to be where problems is.
    Anybody know how to fix this?
    Regards
    Jens Hyllegaard

    I had this error on my new exchange 2013 install for a client.
    After migrating a number of users over and testing OWA (send & receive) i assumed all was well, one of the batches had finished so i asked the user to open up outlook, but it was throwing up U/N & P/W box, even with typing in the correct details
    it was not accepting anything, then not being able to connect.
    After a lot of hours troubleshooting this issue (Exchange 2013 is new to me!) i found that the RPC to HTTPS feature was not installed (this is required for outlook anywhere to
    run, which connects outlook to exchange 2013). After finding this i installed this feature and thought job done.
    Logged back onto the users machine and still had the same error, after more troubleshooting i found this event ID in my exchange log's. Every 15 seconds this was popping up, so after removing the RPC to HTTPS feature, rebooting the server and re-installing
    this has cured the issue for me!
    Thought i would post up to prevent anyone else spending there evening looking through exchange 2013 logs!
    Regards
    Mike

  • How can I remove any addons after I have uninstalled Firefox?

    A few months age Firefox decided it did not want to play any more after an update. It had something to do with the addons, I submitted a comprehensive error report at the time and didn't hear of any fixes since then. I removed Firefox with revo-uninstaller and reinstalled it at least 3 times since and still got the same error message.
    So what I want to do now is remove any addons and remnants from Firefox. How should I go about this? I was going to just go through Program Files and delete anything that remotely looked like an addon folder and then I was going to go and butcher the registry. But I think that might be a bad idea.
    So "How should I go about this" in the most effective and safe way?
    Cheers in advance for any help.

    If you want to completely remove Firefox, including user profile data (bookmarks, passwords, cookies, installed extensions, etc.) you can follow the directions here:
    *http://kb.mozillazine.org/Uninstalling_Firefox#On_Windows
    This may not remove add-ons that have been globally installed, such as extensions or plugins that are located outside of the Firefox program or profile folder. It would help if you let us know what add-on you are trying to remove.

Maybe you are looking for