Address check says it's within 4G LTE market, but

after I signed up to Verizon and bought 2 Samsung Droid charge phones home, none of the phones have 4G signal, I can only see medium (2-3 bars) 3G signal. Further checking on  the coverage map indicated we are actually in a 4G-extended area....too bad. Will VZW upgrade our area to a REAL 4G soon? I am in Maryland 20841 area. Thanks!

You are still in a "real" 4G area.. Extended just means that you are very far out and probably not guaranteed consistant signal. They'll build it out- just give it time. I'm also in that extended area and depending on where I stand in my apartment, 4G will come or go. When it is linked on 4G, I get around 7-12mbps down / 2-4mbps up. Not bad at all. Even the 3G is peppy with low latency.
Although oddly enough when I do have 4G, the db raiting is between 55-80dbm - plenty to hold a great signal. Why it bounces back to 3G I don't get.. Read this topic for more about that. 4G 3G Signal Flip

Similar Messages

  • Im getting a billing address erro saying that hey cant process my payment but this one would be my third month with the product, why is this happening now?

    any ideas why is this happening now? i would understand if it was at the first payment attempt but this is or it would be the third one,

    I did check the payment portal, Adobe has been trying to charge you August 6th/13th, /20th 2014, it was declined by the Bank .
    Please check with the bank.
    Regards
    Rajshree

  • Customers found with same address; check Message f2145

    Hi All,
    I just wanted to tell you my requirement Ex. suppose i have customer with 2 different address and user want to create 2 customer code with 2 different address and 1 customer is already in sap and user want to create another code with same name but address will be different......at the time is user enter the Name Field system given error "Customers found with same address; check". I have gone through the post but i did not get solution.
    Please provide me solution.
    Regards,
    Abhijeet

    Hello,
      follow the menù path SPRO --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for Creating Customer Master Data --> Change Message Control for Customer Master Data" enter ther error message nummber 145 and set it as a warning (W) or switch it off. Refer to the documentation of the customizing task for more information.
    Best regards,
    Andrea

  • '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

    '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
    I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
    Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
    Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

    It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
    Lion is also affected but not as badly.
    7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
    Obviously that is not a solution for a later Gen5 TC.
    Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
    If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
    I prefer the very short lease but response has been mixed.
    Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
    And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

  • BADI for Address Check in PA30 in ECC6.0

    Hi Friends,
    Is there any BADI for Address Check in PA30 in ECC6.0 similar to what we have in BP transaction in ECC6.0.
    Thanks,
    Pradeep

    check these...
    Enhancement/ Business Add-in            Description
    Enhancement
    PBASRP01                                PA: User exit distributed reporting
    PBAS0002                                PA: Enhancements for Personnel Administration - Menu
    PBAS0001                                PA: Pers.Admin./Recruitment: Default values and checks
    PARA0002                                Enhancement for Calculating Annual Salary; IT0008,14,15
    PARA0001                                Enhancement for Determining the Number of Periods
    HRRPAI01                                User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
    HRPC0001                                HR: PC download authorization
    HRPBAS01                                User Exit for HR Master Data
    Business Add-in
    HRPAD00_PREM                            Definition of User Exit for Collective Search Help PREM
    HRPAD00_RECOG_SCREEN                    Employee Recognition Screen
    HRPADUS_PBAS_0001                       Customer Exit for Message handling
    HRPAD_SUBTY_CHECK                       HR: Master Data, Subtype Check
    HR_F4_GET_SUBTYPE                       HR: Entry help for subtypes
    HR_FAST_ACTION_CHECK                    Check fields on the fast entry screen
    HR_INDVAL                               HR: Indirect wage type valuation
    HR_SET_PKGAB
    HRPAYXX_DELETE_PERNR                    BAdI for Reports Deleting Personnel Numbers
    HRPAD00_PAPM                            Definition of User Exit for Collective Search Help PAPM
    HRPAD00_GET_AF_0008                     Additional Fields for Basic Pay Infotype (0008)
    HRPAD00_ENTRY_LEAVE                     HR_ENTRY_DATE and HR_LEAVING_DATE
    HRPAD00_ADRS                            HR: Address formatting
    HRPAD00MGEACTIVATION                    Activation Action BAdI for Global Employees
    HRPAD00INFTY                            Update / Infotype maintenance
    HRPAD00AUTH_TIME                        Time Logic in the PA Authorization Check
    HRPAD00AUTH_RECORD                      Spanish Data Privacy Law: Exit for Recording
    HRPAD00AUTH_CHECK                       HR: Authorization Check
    HRIV_REDUCE_AMOUNT                      Reduction within Indirect Valuation
    No.of Exits:          8
    No.of BADis:         19

  • Adding a dialog after an address check

    Hello dear members,
    I use SAP CRM 5.0 and have to implement an address check in transaction BP.
    I'd like to know which possibilities are there to realize the following:
    After having integrated an address check into the transaction BP, which is carried out when the check-button or the save-button is pressed, i'd like to know how to insert a dialog into the transaction itself or better into the BAdi i've implemented.
    The dialog should appear when the check revealed some mistakes and asks the user if he'd like to save the data anyway.
    So the questions are is there a dialog component (like in delphi or c#) which can do that and if not how can one implement such a component, where should the dialog be invoked (in the BAdi itself, somewhere after the BAdi or somewhere in the PBO)
    Thank you very much in anticipation and greetings,
    Paul

    Thank you for the hint. I did so and tried to exit the processing when no and cancel are pressed but i failed.
    Within the method "IF_EX_ADDRESS_CHECK~ADDRESS_POSTAL_CHECK" as an implementation of the ADRESS_CHECK BAdi Interface i coded the following:
         " do some checks and write status codes
       if status eq 'e'.
         call function 'POPUP_TO_CONFIRM'
            EXPORTING
              text_question  = text-001 "Do you really want to save the erroneous data ?
            IMPORTING
              answer         = w_answer
            EXCEPTIONS
              text_not_found = 1
              others         = 2.
          if sy-subrc <> 0. " Function call failed.
          endif.
          if w_answer ne '1'.
            errorline-MSG_TYPE = 'S'.
            errorline-MSG_VAR1 = 'Addressdata erroneous!'.
            append errorline to CH_T_ERROR_TABLE.
            exit.
          elseif w_answer eq '1'.
            errorline-MSG_TYPE = 'S'.
            errorline-MSG_VAR1 = 'Erroneous addressdata will be saved!'.
            append errorline to CH_T_ERROR_TABLE.
          endif.
       endif.
    Could anyone tell me how i can abort the processing of the whole program/transaction and prevent the saving of the data when i'm already within the BAdi and not the Dynpro anymore?
    Regards.

  • Looking for Help - DCM Item to check if Computer Rebooted within 7 days

    Hi,
    I would like to use DCM to tell me if computers have rebooted within 7 days.  I would like to audit compliance for this reboot status. 
    I would like to target my Windows servers (14K of them) to tell me if they have rebooted recently.  Is there a way to do this in SCCM using DCM?
    I've been looking at WQL query and think the LASTBOOTUPTime is a good place to check for the (well) last boot time.  But I am having trouble figuring out how to evaluate 7 days and use DCM to report on this for compliance.
    Does anyone have any ideas...
    Note: I have seen post on how to do this using hardware inventory data - but this is too slow for me as our hardware inventory SCCm client schedule is set to 2 weeks for servers.

    Thanks for the script, we are using to see which system haven't rebooted on 35 days.
    We had a few false non-compliant results based on the computer regional settings. 
    I updated your script to and changed it look at days rather than hours.
    strComputer = "."
     Set objWMIService = GetObject _
         ("winmgmts:\\" & strComputer & "\root\cimv2")
     Set colOperatingSystems = objWMIService.ExecQuery _
         ("Select * from Win32_OperatingSystem")
     For Each objOS in colOperatingSystems
         'dtmBootup = objOS.LastBootUpTime
         dtmLastBootupTime = WMIDateStringToDate(objOS.LastBootUpTime)
      txtLocalDateTime = WMIDateStringToDate(objOS.LocalDateTime)
         'dtmSystemUptime = DateDiff("h", dtmLastBootUpTime, Now)
      dtmSystemUptime = DateDiff ("d", dtmLastBootupTime, txtLocalDateTime)
         'Wscript.Echo "time since last reboot " & dtmSystemUptime
     Next
     Function WMIDateStringToDate(dtmBootup)
         WMIDateStringToDate = CDate(Mid(dtmBootup, 5, 2) & "/" & _
              Mid(dtmBootup, 7, 2) & "/" & Left(dtmBootup, 4) _
              & " " & Mid (dtmBootup, 9, 2) & ":" & _
              Mid(dtmBootup, 11, 2) & ":" & Mid(dtmBootup, _
              13, 2))
     End Function
     'dtmsystemuptime is hours since last reboot.  840 hours is 35 days.
     'changed to days
     if dtmSystemUptime < 35 then
     Result = "Good"
     wscript.echo Result
     Else
     Result = "Bad"
     wscript.echo Result
     End if

  • Battery checks say change battery, but it charges and works fine. Help?

    Hey there,
    Just having a problem with my Laptop battery. My product type is a HP G61 Notebook PC. The battery icon in the bottom left says the battery should be replaced, with checks saying it has reached the end of it's useful life.
    I find this hard to believe since I've had the laptop a year and it still charges and works fine. I don't want to spend any unnecessary money at the moment so I'm not sure whether to wait and ignore it to see how it goes.
    Suggestions?

    Hi,
    Jamie2812 wrote:
    Hey there,
    Just having a problem with my Laptop battery. My product type is a HP G61 Notebook PC. The battery icon in the bottom left says the battery should be replaced, with checks saying it has reached the end of it's useful life.
    I find this hard to believe since I've had the laptop a year and it still charges and works fine. I don't want to spend any unnecessary money at the moment so I'm not sure whether to wait and ignore it to see how it goes.
    Suggestions?
    I suggest that you perform a calibration of your battery. 
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT1937 I have successfully restored my iPhone 3 gs( Ios )  by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with ot

    I have successfully restored my iPhone 3 gs( Ios )  by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with other SIM card like Zong etc but the response was same i.e; no SIM card is inserted. It not catching the signals. I am trying to use  my wifi to activate my iphone but it iss not processing then i used itunes to activate by it's again saying that no sim card is detected.
    My all contacts and all data is in this mobile. Now Iam unable to contact anyone. Please help me. How can I sort it out?
    Thank you
    Regards
    Wazir Ali

    Well, if you did it yourself, then there is a chance that you damaged some other component inside the device that is causing your issue. The iPhone's are not user serviceable, and once you have opened the device you have voided any warranty and post-warranty support from Apple. I would try Google to see if you can find any other way to repair your device, as Apple will no longer look at it.

  • I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

    I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

    To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT1695 Ipod Touch When i go to setting then WI Fi it is saying No Wi Fi, also in General About Wi Fi Address it says N/A.

    Please can you advise on this problem?
    When I go to settings then Wi Fi it is saying No Wi Fi, also in General>About>Wi Fi Address it says N/A.
    I'm sure its a 2nd Gen Ipod Touch and it definitely had Wi Fi connectivity 2 months ago.
    Many Thanks Dean Brady

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    It is frequently a hardware problem an an appointment at the Genius Bar of an Apple store is in order.

  • Keeps asking for an address. and says something about protecting family details..is this a scam. what should i do? what address is it asking

    screen keeps asking for an address. and says something about protecting family details..is this a scam. what should i do? what address is it asking for. it is my elderly mothers I don't have one and am far away so I can't advise her. please help.
     I don't think it is an email as it comes up after she has turned it off/on

    tell her to go to settings/safari/clear history and clear cookies and data

  • Please help - Motion trial checker says motion cannot ..  graphics card...

    Motion trial checker says motion cannot be installed graphics card... I have 2 graphics cards: both NVIDIA Geforce 7300 GT in my Macpro 3Ghz... I am using only 1 card with a vga monitor. It says my graphics card does not meet the minimum requirement for motion. but it does. I tried it with a different monitor but I get the same error please help

    Welcome to the discussions!
    Motion compatibility checker...well, that's an old app!! You're probably looking at the wrong place-at the Motion for PowerPC pages.There used to be a trial for Motion version 1 and/or 2 but both will not work in an Intel processor Mac. The Universal binary version ( 2.1 and later ) has been integrated into Final Cut Studio and there's no trial or checker for Motion since then.
    For specs-that you definitely meet-look here: http://www.apple.com/finalcutstudio/specs.html

  • Address Check

    Hi All
    In Vendor Master, there should not be any duplicate vendor name for a particular company code and purchase organization.  We can achieve this by implementing Bussiness Add-In definition 'Address-Check'.
    Can anyone help me in the codes  to be written under 'address-check' or any other way in which  we can achieve this validation.
    Thanks
    Ravi

    Dear Ravi,
               U can use the user exit with enhancement SAPMF02K in the CMOD there u can check where the address is unique or not. This function module wprks just before saving the data.
    If it helps u then waiting for some points. Cheers
    RG,
    VM

  • I checked my Apple ID and was everything ok, but when I'll make a download appears a message saying "your Apple ID is off"

    I checked my Apple ID and was everything ok, but when I'll make a download appears a message saying "you Apple ID is off"

    If you log into too many devices with the same Apple ID, it automatically shuts your ID off as it views the multiple logins as a security breach.
    Just change your password at iForgot, and then log back in. Should work just fine.

Maybe you are looking for