Address data in SRM

Hi Experts,
I have captured address data from ADRC table in SRM but requirement is to capture this data incrementally based on creation date and changed date. Can somebody help me with creation dates and changed dates of addresses in SRM ? In which table, it is stored ? And how can I have with respect to Address number in ADRC ?
Also, If there exist any getlist Function Module which can give me Address data with respect to creation date and changed date without any importing parameter, as I want all address data created or changed daily basis, Kindly provide me with these details if available.
Regards,
Kunal
Edited by: sangku01 on Jan 10, 2012 11:30 AM

Hello Gordan,
can u please make the question more clear
Sarabjeet

Similar Messages

  • MANAGE EMPLOYEE DATA in SRM 7

    Hi all,
    We are on SRm 7.1.
    Can anyone tell me the Transaction/WEb dynpro application for "MANAGE EMPOYEE DATA(SRM 5 trasnaction) now in SRm 7??/
    Under which role can I see this MANAGE EMPLOYEE DATA transaction??
    I need to change the POSITION email address for some users and hence wanted to know the WEB DYNPRO application name for this SRM 5 trasnaction in SRM 7.
    Thanks.

    Hello,
    This option is available under SRM Administration portal tab.
    In order to see it, user should be assianged to portal role com.sap.pct.srm.core.ro_srmadministrator and SAP_GUI role /SAPSRM/ADMINISTRATOR.
    Here you can manage employee, supplier, business partner and address data.
    Regards,
    Ricardo

  • Creation of service order with address data.

    Hello community,
    I have the following requirement: create maintenance orders with order address data, the creation of these orders will be triggered by an interface with a legacy system.
    For order creation I intend to use BAPI_ALM_ORDER_MAINTAIN but this function does not provide the possibility to enter address information.
    I would not like to have to create a partner and assign it to the order as this address will be used only once.
    Does anyone have suggestions how to do it ?.
    Thanks.
    Roberto.

    Roberto,
    Try this:
    *& Report  ZPJA_ADDR_TX
    report  zpja_addr_tx.
    data: lt_adrc  type  standard table of adrc with header line.
    data: lt_adrc1 type  standard table of addr1_data with header line.
    * get address from first object
    call function 'ADDR_SELECT_ADRC_SINGLE'
      exporting
        addrnumber        = '0000033071'
      tables
        et_adrc           = lt_adrc
      exceptions
        address_not_exist = 1
        parameter_error   = 2
        internal_error    = 3
        others            = 4.
    loop at lt_adrc.
      move-corresponding lt_adrc to lt_adrc1.
      lt_adrc1-name1 = sy-timlo.   " write current time for testing
      append lt_adrc1.
    endloop.
    * update second address
    call function 'ADDR_UPDATE'
      exporting
        address_data        = lt_adrc1
        address_number      = '0000033205'
        date_from           = '00010101'
        language            = sy-langu
        check_empty_address = ' '
        check_address       = ' '
      exceptions
        address_not_exist   = 1
        parameter_error     = 2
        version_not_exist   = 3
        internal_error      = 4
        others              = 5.
    call function 'ADDR_MEMORY_SAVE'.

  • FBL5N Address data is missing in Correspondence FB240

    Hi all,
    in FBL5N I create a Correspondence: Environment - Correspondence - Request
    display it, than back with F3. After it I receive the following warning msg:
    FB 240 Address data not created for user &
    How can avoid this?
    Cheers...

    Hi,
    pls. apply the note 1271136.
    BR,
    Monika

  • BP address data in  Email form

    Hello,
    When I create a campaign with communication channel as "email", how can I automatically add business partner address data ( Those BP's which are in the target group) when sending emails?
    Is there a standard functionality available?
    thanks in advance.

    Hi,
    You can use the Personalized mail functionality of the CRM for adding BP address in the email form. This is the standard functionality of the CRM 5.0.
    In t code CRMD_EMAIL while creating the text of the mail form drag and drop address attributes from the left hand side Object / Attribute Business partner.
    In Business partner Object you will get all the fields of the Business Partner including Street1 street2 City, POBox etc. Drag and drop these attributes wherever you want on the mail form text.
    Hope this will help.....
    Rgds
    Mallikrjun

  • Address data changed after invoice is created

    Hi,
    I've a problem to solve and it's related with data changed after invoice is created.
    The scenario is the follow:
    1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
    2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
    3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
    I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
    And, I can't edit this kind of data on invoice creation because it must be done at order level.
    So I don't understand why it happen, but it happen on more than one client.
    I'll hope that anyone can help me to solve this issue.
    Kind regards,
    Nuno Rodrigues

    Hi Nuno,
    the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
    If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
    If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
    Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
    But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
    Hans

  • Adding a new field to the Address Data for a business partner

    Hi Experts,
    I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
    Regards
    Yusuf

    The search help exit allows you to modify functionality of search help. If you add a new field to the
    parameter list that is not contained on the selection method you can manually populate it within the search
    help exit.
    This  would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
    data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
    Therefore you need to read table SHLP in-order to locate position of value within string.
    Example:
    To find position of personnel number (PERNR) within elemenory search
    help M_PREMN you would use the following code:
    Loop at record_tab.
         read table shlp-fielddescr into wa_shlp
                                       with key tabname   = 'M_PREMN'
                                                fieldname = 'PERNR'.
    You could then use this information in the following way, for
    example, to find a persons organisation unit:
          select  orgeh endda
            up to 1 rows
            from pa0001
            into (ld_orgeh,ld_endda)
           where pernr eq record_tab-string+wa_shlp-offset(8)
                                                      u201Cpernr length is 8
           order by endda descending.
          endselect.
          select single orgtx
            from t527x
            into ld_orgtxt
           where orgeh eq ld_orgeh and
                 sprsl eq sy-langu and
               ( endda ge sy-datum and
                 begda le sy-datum ).
    If you have added a new field to the end of the parameters list
    the next step is to populate it by adding this data to the end of
    the record_tab string:
      concatenate record_tab-string ld_orgtxt into record_tab-string.
      modify record_tab.
    endloop.

  • Best way to handle single line Customer and Address Data

    Hi, We have customer data in a single line means name, address everything is in a single line. I am now suppose to cleanse this data using Data Quality. Now my question is how to parse this data. Normally I have dealt with multiple line or address data which I can map to input fields of the Address cleanse transforms. In this case, Shall I just map that single field to "Address_line" of the Address cleanse transform? It should be able to parse or shall I parse all the fields using some function in Query transform and then feed into Address Cleanse transform?
    Thanks,

    Hi, We have customer data in a single line means name, address everything is in a single line. I am now suppose to cleanse this data using Data Quality. Now my question is how to parse this data. Normally I have dealt with multiple line or address data which I can map to input fields of the Address cleanse transforms. In this case, Shall I just map that single field to "Address_line" of the Address cleanse transform? It should be able to parse or shall I parse all the fields using some function in Query transform and then feed into Address Cleanse transform?
    Thanks,

  • Function Module to send Vendor Master Data from SRM to ECC

    Hi Guys
    I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

    Hi,
    Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
    Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
    Hope this helps.
    Regards,
    Hemanth

  • Purchase order Confirmation data from SRM to MM

    Hi,
    I am trying to send Purchase order Confirmation data from SRM to MM via PI. In SRM portal i am able to see that the data has been send successfully. But i am not able to receive any data in PI nor iam able to any messages going from  SRM in SXMB_MONI.
    Please help me.
    Thanks & Regards
    Kasturika Phukan

    Hi,
      In SRM check in sxmb_moni is there any queue is blocked.
      If not then,
      Check your proxy settings.Select Go To and check connection Test.
      Go to sm59 and check H type RFC destination is maintained.
      Go to sxmb_adm check the Global setting value,
      Application system,dest://RFC destination is maintained.
      In XI,
      Go to SLD.
      Check Technical system (client with logical system) maintained.
      Check Business System maintained with role of application system,Related integration engine
      maintained.
    Regards,
    Prakasu.M

  • Change Customer master Address Data using Structure biadd2 in report rfbide00.?

    hello
         i want to change Customer  Master Address Data using using RBIDE00 report program but when i execute the report it will accept input from batch file
    but the same is not getting updated in  customer master .
    please  help me to resolve this issue .
    thanks & regard
    laxmikant soni

    Found the answer from SDN - not possible unless using some BUS.
    RFBIDE00 - Address data issue
    Thread closed.

  • URGENT help needed:Address data missing after QA Refresh from PRD

    All,
    Address data for almost all user-ids are missing after QA Refresh from PRD.
    In QA, after importing the User-Master although its shows successful. The detailed log shows:
       Data inconsistency in USR21. Start RSADRCK2 (See Note 459763)
       Exit program AFTER_IMP_ADDRESS3 successfully executed
       SAP user has no address SAP*
       Error while deleting ADRVP for SAP*
       SAP user has no address SAPCPIC...
       ERROR: Type "F" user exit with SYS_ERROR:     SUSR_CLIENTCOPY_USERBUF_RESET
    We also do a Table export - import wherein the tables
    USR03
    USR07
    USR09
    USR20
    USR21
    USR30
    are included.
    The no. of entries exported and imported are same.
    Also FYI in the User-master Transport i can see the following Tables included in the object list
    USR01
    USR02
    USR04
    USR05
    USR06
    USR08
    USR14
    USR21S
    USR22
    USRACL
    USREXTID
    USREXTIDH
    Has anyone seen this before?
    Any body has any ideas?

    Hello Bidwan,
    I think it is an issue with company address. Just check if  company addresses are existing the source client ?After client copy company addreses of target client will only exist in source client. Then if you do impot of the transport containing USR* tables it will try to assign old company addresses to the users but probably they are not exisitng in target client any more.
    If this is the case then you need to create those company addresses again using SUCOMP and then once again import the transport for user master.
    Regards.
    Ruchit.

  • Vendor master LSMW- Address data + Purchasing view

    Hello experts,
    I have created LSMW to  upload vendor master data (Address data + Purchasing data) using batch input method.
    Successful in uploading address details, but unable to get Payment terms and order currency in the transaction XK01.
    I don't know what is the problem. Can anybody help me out?
    Thanks.
    Mani.

    Hi,
    I also had to do the recording for XK01 only, but i executed it using Recording method.
    By using standard method you have to map your structure having all the fields present in
    the local file with the standard structure present in the 4th step of the LSMW.
    You have to check your fields Payment terms and Order currency are present in which
    standard structure in the 4th step by double clicking on each and every structure and then map
    your created structure with that standard struc.
    Hope it helps
    Regards
    Mansi

  • Transfer supplier data from SRM to ECC

    Hi,
    As far as I know if we are using ROS only, then we can only have the one way synchronization from ECC to SRM. Thus in the process, if vendor register in ROS engine, then when we want to create the ECC vendor, we must create the data in ECC manually, and also link it manually as well.I know this for sure in SRM 5.0
    We are plannig to use SRM 7.0. Is this still the case? I also read somewhere that if we use SUS component, then t is possible for us to have vendor data in SRM synchronized to ECC.
    Is this true?
    Best regards,
    John

    Hi Nikhil,
    So you're saying that even if SUS is implemented and SRM_SUCO_1 is activated we still have to create supplier manually in ECC?
    I have checked the release note of SRM 7 and see this statement regarding SRM_SUCO_1:
    Supplier master replication to SAP SRM and SAP ERP back-end systems
    What does it mean by replication to SAP ERP back-end systems?
    Best regards,
    Yosea

  • XSLT and XML - Splitting out address data for a single XML item?

    Hi,
    I am currently having to change my XSLT code for processing XML feeds from the NHS because the technolgy has been moved from SOAP-based to RESTful (both of which mean very little to me!).  While most of the XML feeds display correctly I have been unable to resolve the following:
    The address data seems to be located under a single item <s.addressLine> rather than <address1>, <address2> <address3> <address4> as in the previous setup.  As a consequence of this I am unable to split out my address data into seperate address fields (in column 2 below).  The code below ....
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:s="http://syndication.nhschoices.nhs.uk/services">
    <xsl:output method="html" encoding="UTF-8"/>
    <xsl:template match="/">
    <table class="xslt_table">
      <tr>
        <th>1</th>
        <th>2</th>
        <th>3</th>
      </tr>
      <xsl:for-each select="atom:feed/atom:entry">
        <tr>
          <td><xsl:value-of select="atom:content/s:organisationSummary/s:name"/></td>
          <td><xsl:value-of select="atom:content/s:organisationSummary/s:address"/></td>
          <td><xsl:value-of select="atom:content/s:organisationSummary/s:address/s:addressLine"/></td>
        </tr>
      </xsl:for-each>
    </table>
    </xsl:template>
    </xsl:stylesheet>
    ....generates the following result:
    1
    2
    3
    Royal Eye Infirmary
    Apsley RoadPlymouthDevonPL4 6PL
    Apsley Road
    Mount Gould Hospital
    Mount Gould RoadPlymouthDevonPL4 7QD
    Mount Gould Road
    Scott Hospital
    Beacon Park RoadPlymouthDevonPL2 2PQ
    Beacon Park Road
    Peninsula NHS Treatment Centre
    20 Brest RoadPlymouthDevonPL6 5XP
    20 Brest Road
    Derriford Hospital
    Derriford RoadCrownhillPlymouthDevonPL6 8DH
    Derriford Road
    Nuffield Health, Plymouth Hospital
    Derriford RoadPlymouthDevonPL6 8BG
    Derriford Road
    Plympton Hospital
    Market RoadPlymouthDevonPL7 1QR
    Market Road
    St Barnabas Hospital
    Higher Port ViewSaltashCornwallPL12 4BU
    Higher Port View
    Liskeard Community Hospital
    Clemo RoadLiskeardCornwallPL14 3XD
    Clemo Road
    I would be very, very grateful for any thoughts and suggestions on what I might be able to do to resolve this.
    Best wishes
    Simon

    Thanks dvohra
    But in my servlet, I already have the transformer factory defined as follows
    public class JDOMServlet extends HttpServlet {
         private TransformerFactory tFactory = TransformerFactory.newInstance();
         private ResultSet rs = null;
         private StreamSource xsltSource;
         private Templates template;
         public void init(ServletConfig config) throws ServletException {
              super.init(config);
              ServletContext ctx = config.getServletContext();
              try {
                   //Want to cache the stylesheet for future resuse
                   //then it doesnt have to be loaded constantly
                   URL xslURL = ctx.getResource("/WEB-INF/viewStudentDetails.xsl");
                   System.out.println(xslURL);
                   xsltSource = new StreamSource(new java.net.URL(xslURL.toString()).openStream());
                   //xsltSource = new StreamSource(ctx.getResourceAsStream("/Web-inf/viewStudentDetails.xsl"));
                   template = tFactory.newTemplates(xsltSource);
              catch (Exception e) {
                   e.printStackTrace();
    I think the key point is that, this transformation servlet worked fine, when all it was outputting was the xml data, styled in a table. As soon as I enter more table info, (i.e. for the banner and navigation bar), the null pointer exception pops up.
    ....a lost and puzzled jase....
    Thanks again.
    JS

Maybe you are looking for