Addressing external photos

Dear All
I have moderate experience of actionscript, but still mastering 2 and Flash 8!
I've been modifying some code I wrote a while ago that simply loads and plays an external FLV. The original code works well as I can simply copy the swf into any folder and when run, it will play the FLV with the given name in that particular folder.
I decided to have a photo still over of the movie before it plays, so I modified the script and 'loader' to put in the external Jpg. If I test the swf it works fine. But when I install the code from a sub folder into a webpage via 'object', the Flash file trues to find the photo in the webpage folder not the sub folder where the swf originates and where both the FLV and jpg are?? Both the FLVplayback and Jpg loader address in the same way in 'parameters' of properties, yet the FLV plays and the jpg won't. I only discovered what exactly was happening on a hunch and copied a different photo into the main web page folder with the same name.
I have also rewritten it a completely different way using movieloader, but got exactly the same results. I know I could put the full web address of the jpg into the parameters, but then I have to modify it every time I use it. I'd really like to be to simply copy it into another folder.
Any one got a clue????
Thanks
Mike

The main web page with the object code in it, is in the main directory folder, the swf, FLV and jpg sit in a subfolder. If I run the test HTML that I published with the SWF from flash into the subfolder everything is fine. If I run the web page html in the main directory which addresses the same SWF, it will find the FLV subfolder, but search for the photo in the main directory not the sub folder where the SWF actually is????

Similar Messages

Adding external photo galleries, calendars, etc. in Catalyst

Is there a way of adding external photo albums, calendars (ie. yahoo, google) into a website made in Flash Catalyst?

The short answer is no. If these modules need to be within the design of the Flash Catalyst project, you can add them using Flash Builder to add them in. This method will require some effort and knowledge of ActionScript and the Flex Framework. If these modules need to next to the Flash Catalyst project, then you could modify the produced HTML file that contains the Flash Catalyst element and insert the modules.
Either way, you will have a modest amount of development to add these elements to your project.
Good luck,
Chris

Address book photo in Mail

Is there anyway to remove the Address Book photo when printing a Mail message? I print some of my stuff to pdf and would rather not have the photo printed as well.
Thanks.
iMac G5 20

Bjorn
Thanks, but tried it and I have the correct photo in system prefs, and the wrong one in address book.
EDIT - But wait, now sorted. I deleted my 'Me' card and created a new one, and now the correct photo displays in both places.

Setting elements 13 as my external photo editor

I have set elements 13 as my external photo editor in preferences , however when i select this the elements editor program does not open. Can anyone help with this please.

I don't know if this still applies, but:
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/

Time Machine will not back up external photo drive

Time Machine will not back up external photo drive, slightly different format, one case sensitive the other not. How do I resolve. Bought new external drive same format as TM in the hope that I could copy the files from photo drive but that will not copy all files as it is saying file already there. Again the case sensitive issue...
Paranoid about losing 1Tb of photos all cataloged in LR5
Possible solutions I have looked at but not yet tried.
Use the new 2Tb drive to make a new TM backup then reformat the old 4Tb drive the same as Photo drive.
Then do a complete backup of all files and photodrive to TM.
A lot of work, USB 2, so if any one has a simpler answer I would love to hear.
Roger

crash888 wrote:
I reinstalled Snow Leopard on my Mac Mini after having some issues. After reinstallation, Time Machine would no longer backup to my External HD because it will not allow me to change permissions.
What message did you get? You should never change permissions (or anything else) on a Time Machine drive -- TM does that for you.
Start with #C2 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
It will show you how to locate the message(s) that describe the problem, then help you fix it.
If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.

IMac address book photos

I have imported my outlook contact list to my iMac and added photos to the contacts, but when I sync my iPhone the photos do not display with the contacts on the phone. Any suggestions?

Was this data on the external drive transferred from a Mac running 10.4?
If so, you need to transfer the Mail.app preference file from the old Mac also which is located at Home > Library > Preferences > com.apple.mail.plist. This preference file stores all account information and general Mail.app preferences.
If you have this file from the old Mac and if this old Mac was running 10.4, do the following.
With the Mail.app quit on your new iMac, place the backup copy of the Mail folder at Home > Library to replace the previous backup copy of the Mail folder placed there.
Place the com.apple.mail.plist file from the backup drive at Home > Library > Preferences on your new iMac.
Launch Mail and it should be identical to Mail on your old Mac at the time the backup copy of this data was created.
For Address Book data, with the Address Book quit on the iMac and using the Finder, place the copy of the AddressBook folder from the backup drive located at Home > Library > Application Support in the same location on your new iMac - Home > Library > Application Support > AddressBook.
Launch Address Book and all data should be restored.
Safari Bookmarks are located at Home > Library > Safari.
With Safari quit, place the copy of the Safari folder from the backup drive at Home > Library.
Do you use iPhoto for your pictures and if so, did you backup your iPhoto database of just some photos?

I want to include an external Photo drive in my current Time Machine backup. How?

I just set up my Time Machine last night. I have two additional external hard drives attached to my iMac, one with photos, one with music. I wanted those two external hard drives to be included in my Time Machine backup, but apparently I did something wrong in setting up Time Machine because it appears they have been excluded from the backup process.
I see them listed in the exclude list, but I see no way to add them to Time Machine backup. The whole reason I wanted to get this backup set up was to make sure my photos and music were coppied to the backup. Is there a way to add these two external hard drives to my Time Machine backup now that it has been set up? If not, is there a way to start over and re-setup the Time Machine so I can include them?
It seems like it shouldn't be so complicated. What am I missing?
Thank you for your responses.

You remove the drives from the exclude list..
Use the + to add things to the exclude list..
Highlight the item and use the - to remove it from the exclude list.

SMTP Server not responding to emails sent to 1 address externally

I've set up a mail server on a 10.4.11 machine. Everything was working fine until I accidentally deleted my personal account via Workgroup manager, I figured since it was IMAP I could just recreate it and everything would work as it once did. It didn't, now when I send emails to that address, the smtp log shows nothing, but yet I do not receive a failure message back to the sender. However, the messages sent internally from other addresses in that server work properly. In summation, I can't use an external address to send emails to one of my accounts, the smtp log doesn't even show an attempt made to connect to the server.
Also, all the other addresses work fine.
Here's my postconf -n:
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps =
luser_relay = postmaster
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost, [removed for security]
mydomain = [removed for security]
mydomain_fallback = localhost
myhostname = [removed for security]
mynetworks = 127.0.0.1/32,[removed for security]
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
here's my postconf:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
broken_sasl_auth_clients = no
canonical_maps =
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_errors_to = no
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG
fallback_relay =
fallback_transport =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
hash_queue_depth = 1
hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
in_flow_delay = 1s
inet_interfaces = all
initial_destination_concurrency = 5
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_cache_connection = yes
lmtp_connect_timeout = 0s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_lhlo_timeout = 300s
lmtp_mail_timeout = 300s
lmtp_quit_timeout = 300s
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 120s
lmtp_sasl_auth_enable = no
lmtp_sasl_password_maps =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_send_xforward_command = no
lmtp_skip_quit_response = no
lmtp_tcp_port = 24
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_recipient_maps =
local_transport = local:$myhostname
luser_relay = postmaster
mail_name = Postfix
mail_owner = postfix
mail_release_date = 20040915
mail_spool_directory = /var/mail
mail_version = 2.1.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_size_limit = 10240000
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_based_routing = no
sender_bcc_maps =
sender_canonical_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_connect_timeout = 30s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_enforce_tls = no
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 0
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 120s
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $var_smtp_sasl_opts
smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
smtp_send_xforward_command = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_cipherlist =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_scert_verifydepth = 5
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_limit_exceptions = $mynetworks
smtpd_client_connection_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_reject = yes
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = none
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_application_name = smtpd
smtpd_sasl_auth_enable = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_cipherlist =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_key_file =
smtpd_tls_loglevel = 0
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_daemon_random_source =
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 60s
tls_random_reseed_period = 3600s
tls_random_source =
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
Message was edited by: JVicious
Message was edited by: JVicious

Ok, so I used mailfbr to try and fix it anyways, just to see what would happen. That didn't fix it, so I thought I could use the Backup program and just restore to an earlier point to see if the original settings could be restored, tat didn't work either, that totally messed everything up worse. I've had problems connecting to the lmtp socket, reading the mailbox file, permissions, but I think I've fixed all those. The only problem now is that everything gets stuck in the queue. I've checked these topics almost the whole day for these problems, but the cause and solution are not the same for me. Anything I can do? Or should I just start fresh again?
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
70-91-236-58-BusName-Michigan:/usr/sbin root# postconf -n
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = postmaster
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550

In Aperture using the external photo editor Adobe photoshop elements 10 editor. My photo will not come back to aperture unless the photo is saved on the desktop and then imported back to Aperture. What am I doing wrong?

Using Adobe Photoshop Elements 10 Editor as external editor in Aperture. The issue is once i make the changes in Photoshop it request that I save (use tiff) and the photo is not update in Aperture. What am I doing wrong?

Marianne,
how do you save? Photoshop Elements can save either versions or overwrite the original file, afaik.
You need to set the save preferences, so that it will write to the original file and not write a version. Also the filename extension should be "tiff" and not the default "tif" (I think you did that already).
Regards
Léonie

Best way to manage external photo collection with iPhoto?

I have a large collection of photos that now resides on an external NAS drive. I used Canon ZoomBrowser EX software on Windows to download the images from my cameras, but I want to start using iPhoto on my MacBook instead. There's no metadata associated with the photos, it's just the JPG files, so the fact that I used ZoomBrowser doesn't really matter.
I want to keep the photos on the NAS drive, so they can be accessed from other (Windows) computers in my house, and I'd like to keep to existing folder structure I'm using there. It would be nice if photos could be added to the library from any computer, but I can live without that if necessary. It would also be nice if I could add photos from my iPhone to the library when syncing with iTunes, without syncing existing photos back to my iPhone, but I might have to use a separate library from the iPhones photos and copy them to the "main" library.
I know I can use either an iPhoto managed library or referenced library with the external drive, but I'm not sure which is the best option given my requirements. Will either or both allow me to retain the folder structure I'm already using? The metadata created by iPhoto doesn't need to be on the external drive, since I'm only using iPhoto from one machine, but it's okay if that data is on the external drive (even though that will slow down iPhoto).
Suggestions?

Best suggestion? Use something else.
I don't say this lightly, and you'll see I have some experience with the app but the scenario you describe is not one best suited to iPhoto.
Given: you want the photos files to reside on the NAS.
An iPhoto Library in Managed mode - cannot live on a NAS. iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
Also, in Managed mode, the Library is simply unavailable to non-Apple devices. Period. Iphoto has no cross platform ability whatever.
So that's out.
iPhoto in Referenced Mode is inherently unsafe when the Library is on one drive and the photos on another. Here's a fuller discussion of the issues:
https://discussions.apple.com/thread/3062728?tstart=0
But the take away is number 3: If you have the Library on one volume and the photos on another you if anything changes in the path to a file (Like if you upgrade your machine, move the files on the NAS or on to another one?) then the link will break, and you'll have to repair it manually. For every photo in the Library. One at a time.
Simply that's enough for me to rule iPhoto out.
Aperture has no such limitations in Reference Mode. You can repair paths to images, manipulate the storage via the application and so on. It's more expensive, sure, but more powerful. I think it's a better fit for what you describe.
Regards
TD

How to make Address Book photos appear in .Mac contacts?

How do you make the photos from your Address Book appear on your .Mac account? The new .Mac interface leaves space for photos in the contact cards, but I cannot figure out how to make the photos from my Address Book appear there. Is it possible to syncronize in a way that syncs photos too?
Thanks for any help on this.

I have the same problem, my photo IDs from my computer Address Book will not sync with my .Mac account. I've asked two Creatives @ the Apple Store in Burlingame CA but they did not know the answer. I also ask the deminstrator of .Mac at MacWorld but when he accessed the Demo version at the show it too was void of pictures. All those who I've asked promassed to get back to me but hae not yet. My only conclusion is it doesn't work but may working in future versions. Does anyone have their .mac Address Book show the picture ID photo's from their computer version or know how to desplay these ID photo's on line?
Best regards,
Pat Allen
[email protected]

External photo bank not included in contents

I store my photos on an external drive called Photo Bank. I recently upgraded to CS4, and when I open Bridge with the Photo Bank connected via USB, it is not included in the choices under content. I cannot find a way to locate the Photobank on bridge. What do I need to do? Thanks.

Curt,
Thank you for your reply. I did what you said, and can now access the Photo Bank.
I have one further question: When I installed CS4, my old version (CS2) remained on my computer. Should I uninstall it, or leave it?
Thank you.

Address Book photo resizes after set

I have a MacBook Pro on OS x 10.7.5. When I add a photo to Address Book then click "Set" it will change back to its original size after a few seconds. Anyone have an answer to how I can stop this from happening?
Mike

Are you referring to Personal Address Book entries or to the Corporate Directory or both? As you mentioned "cn" I initially thought you were referring to the Corporate Directory, but then you mentioned adding new entries so it became less clear - how did you add the new entry? Have you compared the ldif of an entry for which it does display the email address with one for which it doesn't - are there any obvious differences in attribute names? Is there any chance you had previously edited the <iwc-root>/config/templates/ab/*/xlate-* files?
As an aside, you mention after patching you applied the original configuration settings with iwcadmin - were these not merged automatically as part of the patching process? Were no settings at all merged or just not the settings related to the values in the saveState file from when the application was originally configured [<iwc-root>/install/Iwc-config_*/saveState]?

External Photo Editing from LR4 in PSE10 Editor.exe

I have just upgraded LR3 to LR4 and now find that I cannot use the photo external editing feature (in PSE 10 Editor.exe in my case). All I get is 'Unexpected error performance command:bad argument #1 to 'lower' (string expected, got nil)'. Any ideas as to what the problem is here? This worked OK in LR3.

Fixed problem by downloading Lightroom 4.1 RC.

Inactivate address book photo

How do I make my photo in the address book NOT attach to emails I send (using Leopard)? Thanks!

I thought this would be the case, but when I CC myself on mail I send to others, my photo attachment comes through. I finally erased my entry in address book and re-entered without photo. That has done it, but I'd like to be able to include photos for other entries in the address book...sigh...
Thanks for trying tho'

Addressing external photos

Similar Messages

Maybe you are looking for