ADE Does Not Recognize Import From Nook

I have loaded some books directly from B&N to my nook. The file format that B&N uses is the ISBN number, dot epub. For example 97803454.epub. However, when I connect my Nook to my computer when ADE is open, I am not able to drag and drop the file to ADE; I get an error message that the document is licensed to another user. I can place the file in the ADE folder through Windows Explorer and then add the item to the library, and the item appears but under status, "errors" appears and I am not able to open the file. All I see in the library is the ISBN number.
Is there a way to make this file recognizable in ADE.
Thanks in advance for any assistance.

ADE does not ( yet ) support books purchased from B&N.

Similar Messages

ADE Does Not Recognize My NOOK Tablet

I have searched the forum for answers, but so far no one seems to have the same problem I am experiencing. I have been using a Win 7 PC to download EPUB books from my local library for nearly two years with no problems. Seemingly overnight ADE no longer recognizes my NOOK. I have tried rebooting the PC, uninstalling/reinstalling both ADE 1.7.2 and 2.0 (I am now back to 1.7.2 after seeing other posts re: 2.0). I have unauthorized and reauthorized ADE, and it still does not recognize my NOOK when it is plugged in. The cord/connection seem to be fine; I can see the NOOK in Explorer, but not with ADE. I have also deleted the ".adobe-digital-editions" and "digital editions" folders on the root of the NOOK's drive to initiate the download process. No luck so far; does anyone have any ideas on next steps? Thank you

With Sony ereaders you must have some extra Sony software.
If you don't, you get exactly what you see; the device is seen in Explorer but not in ADE.
I don't know if there is anything similar with the Nook, but I mention it just in case.
In the case of the Sony, the extra software is installed with Sony Reader software;
but you don't have to run the Sony Reader for the extra software to have its effect on ADE.
If for some odd reason you can't get the Nook recognized,
you should still be able to borrow books as usual and download the file using ADE,
and then transfer the .epub file to the Nook using Explorer.
As long as the Nook is still authorized with your ID, you will be able to read the books on the Nook.
A bit more of a faff than direct ADE transfer, but not too inconvenient.

ADE does not recognize Icarus t701 tablet

In the Icarus manufacturer specification there is ADE recognize the t701 tablet device, but it does not. The tablet with Android OS is connected to the PC via USB, but ADE can not recognize it. It is sad, because I can't install ADE directly to the tablet because the Android does not support flash. What can I do to read DRM ePub files on my tablet?

Thank You for your answer! In the meantime the manufacturer has changed the specification of the device. The t701 tablet compatibility with ADE is no longer readable, but there is a solution of my problem:
"To read DRM protected content you might need specific applications, depending on the source of the book. One possible solution is to download the TXTR application from the Android market. You will need to register with them, but it will enable you to access DRM protected content on your tablet and other devices."
I've tried it, and it's really works, the TXTR software can authorize the tablet device with my Adobe account!
Anyway Adobe plans the ADE compatibility with the Icarus t701?

ADE does not recognize NookColor

I have ADE installed on my computer and I can download ebooks to it. I want to transfer the ebook to my Nookcolor but ADE does not "see" it. What do I need to do to get ADE to "see" my Nookcolor? Thanks.

I spent HOURS trying to figure this out and I finally fixed it. It takes multiple steps.
1. First you need to delete the adobe.digital.editions file on your Nookcolor (because it loaded but did not register you need to do it again) See steps below
Connect your NookColor (NC) to your computer and then try to wake up your Nookcolor. It should tell you it is now connected by USB and you can transfer files.
Once you see this, go to My Computer and choose whatever drive your NC is connected to (you will need tochoose Open Folder to View the files in Windows Explorer - if it asks you that question)
Open the NC files in windows explorer
You will see a file folder named .adobe-digital-editions
Delete it (we will reinstall it later). I promise it will not hurt your NC
2. Make Internet Explorer your default browser (don't know why but found this to be part of problem in my research) and close any other browser
3. Make sure Digital Editions is closed on your PC
4. Turn off your firewall (DON'T forget to turn back on when we are done!)
Go to Start menu to Control Panel and choose Windows Firewall
Turn off firewall
4. With your NC still connected to PC, Open Digital Editions on your PC
It should now ask you if you want to authorize a device (your NC) say YES!
Now when you are in library view of Digital Editions you should see MEDIA listed at the bottom - that is your NookColor
To add books in Digital Editions to your NookColor you should just click and drag the title of the book to the word MEDIA
Your books will now be on your NC and SHOULD be authorized (eliminating the credit card questions)
5. Eject your NC from your PC (right click on the drive it is located on and choose Eject)
6. Turn your Firewall back on (Start, Control Panel, Windows Firewall, On)
7. Wake up your NookColor (not connected to PC anymore) and check to see if you can open your books
Click on Library and choose My Files and then Digital Editions
You SHOULD see the books you copied from your PC
Open Digital editions folder
Open a book AND IT SHOULD WORK!
Hopefully, this will help you. If not, try deleting the old books you had tried to download before and start fresh. You can delete them while your NC is connected to your PC and you are viewing the files in Windows Explorer - that is the only way to delete books from your NC. I am a computer software trainer so I tried to make these instructions as user friendly as possible. Good luck!!
Julie

Was able to move books to old Nook but ADE does not recognize the newGalaxy Tab4 nook that I got

was able to move books from ADE to my old Nook, but can not get the program to recognize my new Galaxy Tab4 nook.
If copy and paste, am unable to open......does not accept my Adobe ID

ADE doesn't recognize devices connected in MTP mode, the new Galaxy Tab4 might be connected in MTP mode.

ADE does not recognize my device

I installed Adobe Digital Editions on my PC on the instructions of my library when I wanted to borrow an ebook, and authorized it with my Adobe ID. Becuase I want to read the book on my tablet, I then connected my tablet (a Samsung Galaxy Tab 2 10.1, model GT-P5110) and launched ADE as the instructions for transferring an ebook to ereader specify (see Transfer eBook to eReader | Adobe Digital Editions) but ADE is not recognizing my device, even though the computer itself is recognizing it. I've tried several times with the same results each time and I am getting pretty sick of having my time wasted. Help please!

FYI, I have ADE version 4 and can't get my ADE to recognize my Nook reader. My mother, OTOH, has ADE version 3 on her computer, and just now her ADE did recognize her Nook. The library book she downloaded this evening has now been transferred to her Nook.
My conclusion: if your troublesome ADE is version 4, perhaps you could try uninstalling that version, put on version 3, and see if that version will recognize your device.

Dates does not follow import from iPhoto

Hi!
I wanted to learn Aperture 3 so I imported my iPhoto library with a couple of Events and stuff, but when I got going I noticed that tha date of every picture I imported was set to 2001-01-01 01:00:00. But when I import them from Photo Stream the dates are right.
Why did this happen, and is there any way to fix it? It took a long time to import the library, so I don't wan't to try that as a first option...
Thanks!

I also observed this problem on some images imported from iPhoto. In all cases the the date has already been wrong in iPhoto after upgrading the iPhoto library to version 9.3.2. And when importing to Aperture the wrong date was transferred.
The problem (with the images I inspected) was, that the edited versions show the wrong capture date, not the original (master) image files. The originals have the correct capture date in the EXIF information.
In my Aperture library I recovered the date by collecting all images with the wrong date in a smart album, selectig them and using the "Photos > New version from Original" command.
The new versions all had the correct date.
BTW: For my images the date was not 2001, but 1901 - more than a hundred years off I only saw this in Aperture in the "Date created" Exif tag, not in the "Date" tag. iPhoto is showing the full year 1901.
Regards
Léonie

My daughter changed her access code and forgot, how does she access it? iTunes does not recognize it from the computer (it is registered in my user name). HELP? Oh the nearest Apple Store is about 40 miles away.

My daughter forgot her access code to her itouch. Itunes can't access it when i plug it in. it is registered under my id. how do we reset the passcode without the passcode?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Keynote 4.0.2 does not recognize documents from 4.0.1

Since I upgraded to version 4.0.2, Keynote does not open documents created under version 4.0.1. The error message reads that I need a newer version of keynote to open the document.

Welcome to the discussions, Cristiane.
Do you also have iWork '06 still installed. If so, then rename Keynote in the iWork '06 folder so there's not two copies of a "Keynoe" app on your system.
http://www.keynoteuser.com/news/?p=259

IPhoto does not recognizes formate from Kodak digital camera, what do i need to do to import photos?

I am trying to import pohotos from a Kodak digital camara Z1275 to iphoto and I recieve a message,"unrecognized format-file cannot be imported" What do I need to do now? I am new to the Mac. Moving from PC to Mac.

There is an issue with Kodaks and Macs. Use a USB Card reader.
Regards
TD

ADE does not recognize my Samsung Galaxy Tab Samsung SM-T310

I'm using Windows Vista, I updated ADE today, but when I run it, there is no device. Calibre sees my device just fine, and so does Windows Explorer.
Because of this, I cannot view or read the books I borrow from the public library. (I don't use ADE to read, I don't read on the laptop (really really not an option for visual comfort reasons)). I just want to read the library books on my tab, so if there is a work around, would love to know, as I suspect my device is not supported, yes I checked the blog, and there is a generic listing on the 'supported devices' page, Samsung Electronics co. LTD eBook Reader on Galaxy Tab Android
Thanks for reading,
Ingrid

FYI, I have ADE version 4 and can't get my ADE to recognize my Nook reader. My mother, OTOH, has ADE version 3 on her computer, and just now her ADE did recognize her Nook. The library book she downloaded this evening has now been transferred to her Nook.
My conclusion: if your troublesome ADE is version 4, perhaps you could try uninstalling that version, put on version 3, and see if that version will recognize your device.

MBridge does not recognize files from the Nikon D 5000

I have just bought a d 5000, but neither Bridge or Photoshop will recognize the File type, although they both had no problem with NEF from my d80

NEF files from different models of Nikon have different files formats.
To open the files for your new Nikon D5000 camera you need to have Camera Raw 5.4 beta hosted by Photoshop 11.0.1 (CS4).
If you have CS4, download and run the ACR 5.4 Release Candidate installer and install it.
http://labs.adobe.com/wiki/index.php/Camera_Raw_5.4
If you do not have CS4, you cannot open the files from the new camera directly and you never will be able to, as there will be no further updates to older versions. You will need to download the latest version of the DNG Converter 5.4 and convert your NEF files to raw DNG files first that you can then open in ACR 2.4 hosted by CS; ACR 3.7 hosted by CS2; or ACR 4.6 hosted by CS3.
Note that Photoshop Elements is not directly supported by ACR 5.4 Release Candidate at this time, so you will have to go the DNG Converter 5.4 RC route if you only have Elements.

Audition does not recognize audio from Lifecam Cinema

I just connected my new cam but when I go into Audition's audio set up I cannot get it to work as the default input device. It is listed in the control panel as an input device but even when I move it to the top and check it the default input device designation is greyed out. Any ideas?

Are you running Vista? You might need to enable the device's audio input in the Sound Properties tool in Vista. (You can get there by right-clicking on the speaker icon in the Vista system tray, and selecting Properties.) Once enabled at the system level, Audition should be able to access it as an input.
That would be my first guess as to the problem, since Audition sees the device okay, but doesn't recognize any input channels. If that's not the case or if it still fails to work, please reply and we can continue to troubleshoot.

Mercedes Bluetooth does not recognize waits from Tour 9630

My Tour 9630 pairs with my Mercedes BlueTooth and my contacts transfer over but numbers with a wait inserted will not dial properly. It appears that the Bluetooth recognizes the wait (w) as a pause (p). When I hit send the Bluetooth dials right through all of the string of numbers without stopping or waiting. I used this with other phones and never had any problems. If someone know a fix I would appreciate it.

No, can't find anything about BT in the Control Panel, it's like I wouldn't have any BT device at all installed.
I saw that the laptop comes with the Bluetooth Stack for Windows by Toshiba and I read in some Logitech forum that BT stack for windows by toshiba is not compatible with the logitech software (SetPoint)... so I don't know what to do next...

I have the latest LR4 on a mac-mini with OS 10.9.2. While I can work with raw images from my Canon 1DX and 5DIII. LR4 does not recognize images from my Nikon Df. Solutions?

Are there solutions?

The Df needs at least LR 5.3, ACR 8.3 or DNGC 8.3 to be recognized. So your choices are to upgrade LR4 to LR5.x and update that to at least LR 5.3, OR download the DNG Converter 8.4 and use it to convert your unsupported NEF files into DNGs that will be supported by LR4.
Reference: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

ADE Does Not Recognize Import From Nook

Similar Messages

Maybe you are looking for