ADF 11.1.1.6 application and IE 11 Support

Hi All,
I have application developed using Jdeveloper-11.1.1.6. As per the current understanding application developed using this version will be supported only upto IE 10.
Now the Issue is we would like to support our application for IE 11. Is there anyone who has came to same situation and got the solution.
Thanks in Advance.
Vijay

Fresh from support.oracle.com: Patch 17959515: MERGE REQUEST ON TOP OF 11.1.1.6.0 FOR BUGS 17236592 17723555
You need to open a SR and ask for the patch.
Timo

Similar Messages

  • Photoshop CS is a Powerbook application and isn't supported in Lion

    Is there anything I can do? I just bought a new MacBook Pro today because my MacBook Air (Snow Leopard) is having problems (my fault), and I discover that Photoshop application (CS1) doesn't work in Lion. I can't afford to buy another Photoshop and I only use it for my own personal use, not for work or anything, and the CS1 version has been excellent for that over the years. I am really disappointed by this, and I really did not want to change operating systems for this reason (because of compatibility issues arising).
    Is there any program like Rosetta that I can install? I don't know much about Lion. I am familiar with Snow Leopard as I've used it for three years and it has been really good, no compatibility issues with programs from my old Powerbook.
    If I can't use Photoshop that will mean a lot of decrease in the quality of the utility of using this new computer. I wish I had bought a second hand MacBook Pro or something like that with Snow Leopard on it. As I've said I've had VERY few issues with Snow Leopard.
    There are other applications that are cheap or free that I can use instead of PS but I have gotten used to PS and I don't really want to learn how to use another application.
    Is it possible to use PS by sticking the external hard drive with the backup of Snow Leopard stuff from the MacBook into the USB port of the new computer and then using it that way? I can move files I need to work on over to the external drive.

    I tried to get an upgrade. I was told in an email that it's not possible to upgrade to CS 4 or 5 from CS1. I wasted a lot of time trying to upgrade because on the Adobe website, they say it's possible but you can't find the upgrade. I spent two days trying to buy and download the upgrade, and then sent an email to Adobe support. That was their reply.

  • SLCM BSP Applications and Firefox 2 Support

    Hi,
    I have looked through the Web browser support grid in the NW 7 documentation from the Product Availability Matrix, and also have read note #598860. From these I was unable to infer what the current and future status of Firefox 2 support is for the SLCM BSP applications, especially PIQ_AUDIT (and the Advisor UI that is supposed  to be available).
    Is there any definitive source of information about Firefox support in SLCM 6.x? (Firefox 2 support is broken for the PIQ_AUDIT application in SLCM 4.72, and I need to make sure that students with this browser can use PIQ_AUDIT for self-service in SLCM 6.x.)
    Thanks,
    Eric
    P.S. I saw the information about how Safari is treated as IE 6. But, it would be nice to know explicitly that this browser is fully supported as well.

    Note #598860 has apparently been updated, and Firefox >= 2.0 is considered officially supported for DESIGN2003-based BSP applications.
    Chances for official Safari support do not look good however.

  • ADF Application and Oracle Portal Login Page

    We have developed ADF application and deployed it in Oracle AS 10.1.2 along with the custom JAAS module, which is working fine with the application custom login page. As a next page, I want to use Oracle Portal login page for the authentication and authorization.
    How can I accomplished it? Any idea?
    Thanks,
    AP

    Shay,
    1. I created blank ADF project
    2. I copied myreport.jsp file (this one was generated by Oracle Report Builder) under ..ViewController/public_html directory
    3. Created directory 'lib' under ViewController/public_html/WEB-INF/lib
    4. Copied reports_tld.jar file under the directory created in 3.
    5. Created simple jspx page with the af:link (btw af:goLink does not exists in JDev 12c), set 'destination' to myreport.jsp
    After the steps above I could not even compile the application, many problems too many to list here, Basically JDev is trying to build the project with .jsp file generated in Report Builder and is unable to.
    So to be sure we are on the same page: I am trying to embed JSP report files generated by Report Builder into ADF project, then create EAR file and deploy on standalone WLS. Finally execute JSP web only report.

  • Communication between ADF Application and third party tool

    Hi,
    JDev 11.1.1.5.0
    I am a new bee to SOA Suite :). I am looking for a suggestion on below usecase.
    We have Arbortext Editor which is a dynamic publishing tool for creating technical publication. We are planning to develop a UI tool
    using ADF/JDev. As POC, we are able to invoke our ADF application from Arbortext Editor as shown below.
    AccessURL accessURL = new AccessURL();
    String myURL = "http://127.0.0.1:7101/IFS_Object_Selector_1-
    ViewController-context-root/faces/object_selector_main?";
    java.awt.Desktop myNewBrowserDesktop = java.awt.Desktop.getDesktop();
    java.net.URI myNewLocation = new java.net.URI( myURL);
    myNewBrowserDesktop.browse( myNewLocation );
    So, Arbortext is having it's own JVM and can have standalone java program with main method. If we can able to provide communication between our ADF application and Arbortext JVM, that can solve our issue.
    We need to pass some information back to Arbortext editor from ADF application on some action (Button click).
    Can you suggest any clue on this?
    It would be really helpful, if you can provide some pointers for similar usecases.
    Thanks,
    Samba.

    Hi Samba,
    I'd suggest better raise it in he ADF forum.
    However, this should be possible by calling the Arbortext functions on click of ADF form buttons. Or you may send the information to a placeholder (JMS, File, DB etc.) from where Arbortext can pick that information.
    Regards,
    Neeraj Sehgal

  • Adf 10.1.3.4 application on OAS SE ONE 10.1.2 ? and OC4J licensing

    Hi,
    1. Is this posssible? To run adf 10.1.3.4 application on OAS SE ONE 10.1.2 ?
    I suppose no, adf 10.1.3.4 is using J2EE 1.4 and OAS 10.1.2 has J2EE 1.3.
    Am i right?
    2. There is no OAS SE ONE 10.1.3 ?
    3. If I purchase a lincense for OAS SE ONE, can I use OC4J 10.1.3 for my application?
    Bart

    Hi Bart,
    According to my knowledge:
    1. it is not possible, yes you need OAS 10.1.3
    2. right, there is only Java Edition of 10.1.3
    3. I am not 100% sure but I think yes
    regards,
    Branislav

  • Web application and Scanner

    Web application (ADF-application) and Scanner (device that optically scans images, printed text)
    how to implement a scan from a web application and the ability to preview the scanned document (in the ADF-application) before uploading to the server.

    Oracle has a product, which I worked on, for imaging. It may or may not be what you need.
    http://www.oracle.com/technetwork/middleware/webcenter/content/index-090652.html

  • How to move ADF HumanTask (ADF Project) from One BPM Application to ANother

    Good DAy!
    Problem
    We've created huge Project on ADF with difficult form and now we have to create the same (95%) form in another BPM Application
    Is it possible to migrate ADF Project from one BPM Application to Another???

    Hi,
    You can deploy the ADF Project as an ADF Library Jar file and reuse the taskflow from that jar file in another BPM Application.

  • Which adf runtime library version for application server version

    After sifting thru this forum and some documentation, I was left a little confused about installing ADF Runtime libraries to the application server we're deploying our ADF applications to. I wanted to get a definitive answer to a couple questions:
    1) We're using Oracle Application Server 10.1.3.2.0. We've been deploying our 10.1.3.3 ADF applications to this application server. If we migrate our 10.1.3.3 ADF application to 10.1.3.4, do we need to install the ADF Runtime libraries (from jdev 10.1.3.4) to the application server before deploying/running our 10.1.3.4 version of the application on that server? If yes, do we need to uninstall the 'old' ADF Runtime libraries first?
    2) How can we tell what jars make up the ADF Runtime libraries?
    Thanks for any help you can give. James.

    You always need to have a version match between the ADF libraries on your server and the ADF libraries you develop with.
    So if you are developing with JDev 10.1.3.4 you need to install the ADF 10.1.3.4 libraries on your server.
    You can do this with the ADF Runtime installer or directly from within JDeveloper's tools menu.
    You don't need to uninstall the ADF libraries - they'll be overwritten.
    The list of jar files is in the ADF Developer Guide:
    http://download.oracle.com/docs/html/B25947_01/deployment_topics012.htm#CIHJFAIA

  • ADF 10.1.3.5 application on Fusion Middleware 11.1.2.1

    Hi,
    We are trying to migrate ADF 10.1.3.2 application to 10.1.3.5 and deploy on Fusion Middleware 11.1.2.1.
    Steps followed –
    1. Created a domain for ADF 10.1.3.5 applications
    2. Applied ADF 10.1.3.5 runtime to the domain
    3. Migrated ADF 10.1.3.2 application to 10.1.3.5 and deployed on the admin server
    Application deployment is successful and the search screen is up. When we do search the results are not showing up in the adf table but are in the exported excel (functionality in the application) generated based on the same VO. Is this a known issue? or are we miss something?
    Please advice, your help is greatly appreciated.
    Thank you,
    Siva

    Hi,
    there is no Oracle 11.1.2.1 Fusion Middleware. There is a patch for 10.3.5 WLS to make it work with JDeveloper 11g R2 applications, but there is no 11g R2 FMW. In your case you should deploy your application to WLS 10.3.5 and see if it works there. If you want to run your application on WLS upgraded to 11g R2 then please migrate your application as we don't support the deployment you are trying.
    Frank

  • How do I install Snow Leopard while keeping files, applications, and settings

    I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
    Install Snow Leopard while keeping files, applications, and settings
    If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files.  You may have to reinstall some applications, however.
    Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c . 
    The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install. 
    When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer. 
    Update your system software to ensure that you have the most recent operating system components.  From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

    That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
    (105428)

  • In Pages 5.5.1 when I go to the Open menu I cannot get a preview of any of the files in the list using the spacebar, which I can do in every other application and finder. Is there a workaround?

    In all other applications and in the finder, if I select a document and press the spacebar I get a quickview preview of that file. It does not work in Pages when I choose Open and am given a list of files to select from. This was not the case in older versions of Pages. Is there a workaround, other than doing quickview in the Finder before going to Pages.

    On Yosemite, Pages documents that are in a package (folder) format are viewable with Quick Look in the Pages v5.5.1 file chooser. Pages documents that are in the Single File (compressed, renamed folder) format are viewable in diminished size with Quick Look. Other documents that can be opened in the version(s) of Pages on your Mac will also open properly in Quick Look from the file chooser.

  • SSO between Portal Application and Portal Admin Tool

    Hi All,
    We have a requirement for implementing SSO between a Portal application and
    Portal admin tool.
    We are using WL Portal 8.1 SP4.
    Here is the reason for this requirement -
    A user logged-into Portal Application needs to login to Portal Admin tool to
    do some admin activity. We want to provide a link in the portal application
    using which the user can directly login to the Portal Admin tool without
    having to enter the credentials again.
    If someone has any info on how to implement this, can you please point me in
    the right direction.
    Thanks,
    ~Deepak

    Hi,
    When creating PP you have 2 options
    PP used for compiling and PP used for Building
    You create PP with all the libraries into Developing/Compiling Other DCs
    And another PP with all the libraries into can be packaged into other build results (SDAs).
    Once you have these 2 PP in place you add the DC as used DC.
    And this should resolve the issue.
    Hope this helps.
    Cheers-
    Pramod

  • Choosing between external and partner application and problem with login

    We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
    I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
    Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
    There are at least two problems I have encountered defining the application as external:
    1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
    2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
    I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
    Thank you

    Just some information :
    - The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
    - There is also another thing I don't understand. The link to external application is something like:
    javascript:open_jwindow('../ealogin?ID=76D4766','76');
    and couldn't be executed outside pls/orasso
    in other words we can't give that to our users, can we? They should login to orassso and see that?
    We don't want to involve them in Identity Management...
    Any help is appreciated....
    Regards

  • Web Application and Java Application

    Hello,
    I have a standalone Java application and a web application (JSP/Servlets) that I would like integrate. The standalone app. should send some information to my web app (which is not a problem), but then the user can be at this web app. for a while and then once he sees something he likes here, he can select it which should take him BACK to the standalone application. My question is whether something like this is possible?
    If so, then how do i do it.
    Also the web app and the standalone app run to 2 separate machines and 2 different JVM's.
    Any kind of help will be great.
    Thanks

    Well let me describe the scenario in detail
    We have a standalone java application that is good to search for data across an enterprise database. We also have another application which is web based and uses jsp's and servlets and is good for displaying data in different ways, let's say different kind of graps. Now the user will typically search for something using the standalone application and once he finds what he is looking for, then he might say that he wants to graph the selected data using this web application. Now this part is not too difficult as the standalone app can simply POST the selected information to the web app and the web app can then plot the graph. However, the tricky part is that this web application has the capability to allow the user to select let's say a bar and then get additional info. on that bar. Now to get this additional info. the web app. must contact the standalone app and tell it what bar was selected to get the additional info.
    so my concern is how does the web app contact the standalone app. or even KNOW about this web app. Also, RMI is pretty flaky and i would much rather use web services to accomplish it. If that is the only way to go that is.
    Hope that helps.

Maybe you are looking for

  • Query on OBIEE 11g Lookup feature

    Hi All, I am trying to create a dense lookup. Fact table has data at 4 levels. [Grain] Plant,OU,BU,BS Plant will have data for ou, bu and bs OU will have data for BU and BS and like wise for BU and BS. All higher level hierarchies are populated. All

  • ADD ITEMS TO DROPDOWN BOX FROM A TEXT FIELD(USER ENTERS THE ITEM) AND BOUND VALUE ALSO

    I WANT TO ADD ITEMS  THE DROPDOWN BOX FROM THE TEXT FIELD(ITEM NAME) WHERE USER ENTER'S THE ITEM DESCRIPTION AND BOUND VALUE ALSO SHOULD BE ADDED TO THE SAME ITEM. SAME WAY REMOVE ITEMS FROM DROPDOWN BOX PLEASE GIVE SAMPLE FORM OR JAVASCRIPT FOR THE

  • Converting Air Project to Web Project in Flash Builder 4

    I have an Air project that I need to convert to a web project to post online.  I've looked online with no luck so far, but perhaps someone can point me in the right direction. The closest thing I see to being what I want is if I go to Properties > Ru

  • "Other" in capacity list?

    So I'm syncing my new iPhone tonight, loading up some movies and whatnot, and I notice in the capacity list (where it tells you how much storage you're devoting to music, video, photos, apps, etc.) that my "Other" category is taking up more than 4 gi

  • Ipad3 locked at screen for itunes plug in during ios6 upgrade - ipad not functioning

    my ipad3 is stuck at the screen for plugging into my computer for itunes  - I treid turning it off/on but it keeps coming back - I am travelling and cant cable syn - ipad is not useable and i need to to do work - help