ADF Struts : Form not getting refreshed with new values

I have a view object based ona entity object. It has an additional attribute(calculated attribute) selected from some other table. In my browse page, I click on edit button and change the calculated attribute in the edit page and comeback to the browse page. In the browse page, the changed calculated attribute is not getting reflected. however the database has the changed value. Now, if I query the same browse page in a different browser window, it shows the changed value. But, still the original browser window shows the unchanged value only(even after refreshing the browser). So, this is server caching. Why is the application module not refreshing the bindings? What should be done to achieve the bindings refresh?

Did you look at:
http://radio.weblogs.com/0118231/stories/2005/06/16/whyIsntRefreshingTheBrowserPageEnoughToRefreshTheDataDisplayed.html

Similar Messages

Jsf page not getting refreshed with updated values?

Hi All,
- managed-bean - session scope.
- On a request, Even though, I am updating the bean's properties(values), my Jsf page is not getting refreshed with updated values as it is displaying the older values.
Can anybody throw some light?
Thanks in advance.
- Sri

Please try to give us more information, follow BalusC suggestion.
For this moment I only can say you that the more common cause to this problem (in my expirence) is that you have problems with your conversion/validate phase.

KONV not getting updated with new condition type value

Hi,
I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
Thanks
Shweta

Hi Vasu,
It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
Thanks,
Shweta

Open PO did not get updated with new price.

A mass price change was updated in SAP for one of the supplier . All open orders did not get updated with this new prices.
Can anyone tell me the reason why ?
-Amol

hi
i think u have to do it manually
logically if u see u can use diffrent prices in diff po
if ur price is inr 100 in 1st po and u done gr ur rice will get updated in mm suppose it is 105
next time u create the po of 110 rs and done gr
suppose ur price updated is 108 rs inmm
so it is not happening that 108 is get updated in ur 1st po
right so i think u have to update pos manually
if i am wrong plz let me know
regards
kunal

Child CMP local object not getting refreshed with parent entity information

Hi,
I have a container mnaged relatioships (example) between Emp and Dept entities. I have generated their DTO and using them to tranfer data across layers.
I am updating deptno CMP field of EMP entity and returning the Entity DTO. When extracting dept information like empLocalDTO.getDept_Deptno().getDname(), it's returning old department name.
Can anybody help in resolving this problem of DeptLocal object not getting updated when setting deptno on EmpLocal entity?
Session Bean updateEmp method code:
EmpLocal local = (EmpLocal) getEmpLocalHome().findByPrimaryKey(dto.getEmpno());
local.setDeptno(dto.getDeptno());
local.setSal(dto.getSal());
local.setJob(dto.getJob());
EmpLocalDTO eDTO = new EmpLocalDTO(local);
Servlet Code:
localDTO = empLocal.updateEmp(localDTO);
out.println("Dname : " + localDTO.getDept_deptnoDTO().getDname() + " <BR/>");
Thanks

I haven't personally seen this but Daniele Grandini in his article states:
- The
ICMP latency between the Management Server and the Domain Controller is above 150 msec (this is no fixed rule)
- This specific issue manifest itself when the Active Directory lookup takes more than 1000 msec (more or less);
If the agents have been green (healthy) intermittently then it suggests that it is not a configuration issue as such with the agent but some sort of communication \ authentication issue. And that suggests you are seeing the same issue .. at present there
isn't a straight forward workaround as you can't force the agents to use certificates to get around the problem.
The notes at the bottom of Daniele's article are not promising - http://nocentdocent.wordpress.com/2012/10/26/opsmgr-2012-agents-across-slow-wan-links-are-unable-to-communicate/
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

The Jtree is not refreshing with new values when mouse click on the node

hi ,
I am creating a tree from a vector .The values in the vector is coming from the JTable data after satisfing the some condition. But the data in the Jtable is changing time to time so the data in the vector is also changing .
But the problem is that when first I create a tree with that data the tree is created but for the next time I click on the tree node the tree is not changing i.e. it is not created with the new values that is stored in the vector at that time .what to do .Please help
I am using DefaultMutableTreeNode for creating the tree .In starting I have created one root and the one it's child .Now the next subtree of the root child have to be created by this vector data. this subtree should be updated according to the values in the vecter.
public void valueChanged(TreeSelectionEvent e) {
//code here
subtreecreat();
//some function that create tree after cheching the some condition here
subtreecreat() {
Enumeration en=vector.elements();
while(en.hasMoreElements())
DefaultMutableTreeNode servername = new DefaultMutableTreeNode(en.nextElement());
node.add(servername);
Please help it is very urgent
Thanks in Advance,
anum

Well, you can either use a custom TreeModel that tracks your Vector, or you can use a DefaultTreeModel and call model.reload(node) to refresh the tree below the specified node.

UIInput will not refresh with new value

I have the following JSF component
<h:inputText id="entryfee" binding="#{entryform.evententryfee}" value=""/>
in a onchangeevent in another component I have the following
double entryfee = 100.0;
FacesContext mycontext = FacesContext.getCurrentInstance();
evententryfee.setValue(String.valueOf(entryfee));
evententryfee.updateModel(mycontext);
evententryfee is updated but the new value is not displayed by the component
How do I refresh the display to show the new value ?

Why do you use the component binding instead of a normal value binding?
You can write
<h:inputText id="entryfee" value="#(entryform.entryfee}"/>
Anyway, a component binding does not overwrite the attribute whichi is explictly specifed by the tag.
So, if you insist to use the component binding, you can write
<h:inputText id="entryfee" binding="#{entryform.evententryfee}"/>

MessageDriven Beans not getting called with new messages

I have a system in which data is collected by a number of applications and sent as messages to JMS topics. I also have message-driven beans hosted on weblogic that receive these messages and convert some of the data into entity beans for storage in the database. The problem I have is that occasionally some of the message-driven beans will stop processing messages, which will lead to messages 'backing up'. If left unchecked, the messages start to consume a lot of memory, so I have put message quotas in place to limiit this growth, but the fundamental problem is that the messages are not getting processed. I considered that the MDBs that stop working may be hung up on something internal or are hung up in the database (Oracle 10), but the DB enterprise manager says that there are no blocked sessions, and the monitor data for MDBs says that there are no active objects.
What is happening here? I am using the monitor pages for the Weblogic console, so from that I can see that messages have not been processed, and that there are no MDBs currently processing messages, but there doesn't seem to be enough clues to pin down what is happening. Where should I be looking?

Tom:
Thanks for the very quick reply. I have looked in the logs, and only see error messages when the message quotas are reached. I have looked at the transaction statistics in the monitor console, and it gives zero rollbacks and timeouts. However, I have not tried a thread dump, and will try that when I get into work tomorrow.
Here are some answers to your questions:
* What is your version and service-pack? (I recall that there were one or two long since fixed bugs that could cause stalls.)
I believe my version is 9.22.
* Are the problem topics running on the same weblogic server as the MDB?
Yes
* Are subscriptions durable?
No
* Are you using "distributed topics"?
I think so; the applications that are sending the messages are on processors other than the weblogic server. Is that what you mean by distributed topic?
* You write that you are using multiple MDBs but only some stall. Is it the same ones each time?
Not sure. We want to make sure that we get all the diagnostic information we can before restarting the server because we're not sure if this problem will happen again within 5 minutes, or if it will run weeks. It had run stints of a couple weeks before this point without having this problem.

GenIL Model Attribute Structure not getting updated with new fields added

Hi All,
I have modelled the service interface using GenIL Modelling in Duet Enterprise 1.0. Later, I added some fields to the read operation in the Enterprise Services Builder in the ESR system.
But in the Read Operation mapper method "/IWFND/IF_SRD_BOP_MAP_GET_OBJ~MAP_POST_GET_OBJECTS", when I try to define an object of type GenIL model Attribute Structure (ZMDLZPRGET_DETAIL), Iam unable to access the newly added fields in the read operation.
In transaction " GENIL_MODEL_EDITOR ", under Root Objects, when I open the Attribute Structure name, only the old fields are available, newly added fields are not updated.
But I was able to see the newly added fields in the READ OPERATION data types of Enterprise Services Browser in SE80.
Please help me how to update the new fields for GenIL Model Attribute Structure(ZMDLZPRGET_DETAIL).
Thanks,
Kris

Hi sap_wiz,
Thanks for your reply.
My problem solved,
Thanks
Kris

Cell data not getting refreshed in which user enters data OO ALV(editable)

Hi Friends,
I am using OO ALV for editable grid display.
I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
      CALL METHOD obj_alvgrid1->refresh_table_display
does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
Piece of code:
SET HANDLER obj_event_receiver->handle_data_changed
                                     FOR obj_alvgrid1.
    METHODS: handle_data_changed
                   FOR EVENT data_changed OF cl_gui_alv_grid
                       IMPORTING er_data_changed
                                 e_onf4
                                 e_onf4_before
                                 e_onf4_after.
METHOD handle_data_changed.
DATA : v_valid    TYPE char1,
         v_refresh TYPE char1.
*--check mt_good_cells semantically
CALL METHOD perform_semantic_checks( er_data_changed ).
*--If PBO is again visited, just refresh the ALV grid.
CALL METHOD obj_alvgrid1->refresh_table_display
    EXCEPTIONS
      finished = 1
      OTHERS   = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
ENDMETHOD.
METHOD perform_semantic_checks.
    LOOP AT er_data_changed->mt_good_cells INTO w_good.
      v_index = sy-tabix.
      CASE w_good-fieldname.
        WHEN 'ZASCAS'.
*Now here based on some conditions I am changing my final internal table i_zamtsmatnp
                          MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
                                           w_good-row_id TRANSPORTING
                                             zascas modif.
User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
Regards,
Surya

Hi Surya,
   The approach you are following is correct. You need to use the comibnation of all these things:
Event - DATA_CHANGED
Methods - CHECK_CHANGED_DATA
             - GET_CHANGED_DATA.
However, here are few standard programs which are having similar functionality.
BCALV_EDIT_03
BCALV_EDIT_07
Check out these once.
Note: If anything is helpful, dont forget to reward points
Thanks,
Adithya K
SAP Practise
[email protected]

Toplink Cache not getting refreshed after executing UpdateAllQuery

After executing UpdateAllQuery, the records in the database are getting updated, however the Toplink cache is not getting refreshed with the new data, it still has stale data which is causing issues.
We're also setting
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
Thanks.

Toplink version is 10.1.3.0.0
Here is the code
UpdateAllQuery updateQuery = new UpdateAllQuery(RegisterImpl.class);
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
ExpressionBuilder registerBuilder = updateQuery.getExpressionBuilder();
updateQuery.addArgument("userIdArg");
updateQuery.addArgument("channelArg");
updateQuery.addArgument("tokenArg");
updateQuery.addArgument("dateArg");
updateQuery.addArgument("businessFuncIdArg");
Expression reservedDetailRegExp = registerBuilder.get("reservedDetail");
// build expressions
Expression userIdExp = reservedDetailRegExp.get("userId").equal(
registerBuilder.getParameter("userIdArg"));
Expression channelExp = reservedDetailRegExp.get("channel").equal(
registerBuilder.getParameter("channelArg"));
Expression tokenExp = reservedDetailRegExp.get("token").equal(
registerBuilder.getParameter("tokenArg"));
Expression dateExp = reservedDetailRegExp.get("date").equal(
registerBuilder.getParameter("dateArg"));
Expression busFuncExp = registerBuilder.get("businessFuncId").equal(
registerBuilder.getParameter("businessFuncIdArg"));
// set selection criteria
updateQuery.setSelectionCriteria(userIdExp.and(channelExp.and(tokenExp.and(dateExp
.and(busFuncExp)))));
// substitute the values
updateQuery.addUpdate(reservedDetailRegExp.get("userId"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("channel"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("token"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("date"), "");
updateQuery.addUpdate(registerBuilder.get("businessFuncId"), "");
In the object model for the query, the RegisterImpl has an aggregate mapping (ReservedDetail), which in turn has a number of direct-to-field mappings and an one-to-one mapping to businessFunction (for our query we use a direct query key "businessFuncId")

Panel is not getting refreshed.i see a jam of old and new graph and lines

hi friends
i am attaching my code .when i adjust the slider position the size of the graph will increase(scaling).when i scroll to see the entire graph the screen is not getting refreshed properly.
no leads ..can be 3,12 ...try any arbitary ...(stored in a txt file)
myfile.txt=consider some 600 random numbers for testing.
public class ECGDisplay extends JFrame implements WindowListener
      Container contain;
      JSlider sliderX,sliderY,sliderCount;
      JTextField Xval,Yval,Count;
      int [] time=new int[600];
      int []Volt=new int[600];
     Simpanel[] panelname;
      float relX=1;
      float relY=1;
      LineBorder lineborder,lineborder1;
      JPanel ScalingAdjustersPanel,ECGDisplayPanel;
      JScrollPane Scroll;
      JViewport vp;
      JRadioButton RbX,RbY,RbCount;
      ButtonGroup group;
      private FileInputStream in;
      String horizontalScalingSliderLabel = "mm/S";
      String verticalScalingSliderLabel = "mm/mV";
      String heightOfTileSliderLabel ="Height of tile in uV";
      boolean flag=false;
      int LeadCount;
      int x=20,y=15;
      int count=4;
      JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
      java.awt.Dimension screen = java.awt.Toolkit.getDefaultToolkit().getScreenSize();
public ECGDisplay()
     super();
     this.setTitle("ECG FRAME");
     this.addWindowListener(this);
     this.setSize (screen.width, screen.height);
     contain=getContentPane();
     EcgLeadCount();
     EcgWindowCreation(LeadCount);
void EcgLeadCount( )
          try
           FileInputStream in = new FileInputStream("no_Leads.txt");
           BufferedReader br = new BufferedReader(new InputStreamReader(in));
           LeadCount=Integer.parseInt(br.readLine());
           in.close();
           catch (Exception e)
             System.err.println ("Error while reading no of leads");
void PanelAdjuster()
          for(int i=0;i<LeadCount;i++)
          panelname.setPreferredSize(new Dimension((30*x),(count*y)));
void readMyFile(int i)
          try
          FileInputStream in = new FileInputStream("myfile.txt");
          BufferedReader br = new BufferedReader(new InputStreamReader(in));
          String strLine;
          for (int j = 0; j < Volt.length; j++)
               Volt[j] = Integer.parseInt(br.readLine());
               in.close();
          catch (Exception e)
               System.err.println ("Error writing to file");
public void EcgWindowCreation(int LeadCount)
     for(int i=0;i<600;i++)
          time[i]=i;
          ScalingAdjustersPanel=new JPanel();
          ECGDisplayPanel=new JPanel();
          panelname=new Simpanel[LeadCount];
          for(int i=0;i<LeadCount;i++)
               panelname[i] =new Simpanel();
               System.out.println(panelname[i]);
               readMyFile(i);
               ECGDisplayPanel.add(panelname[i]);
          ScalingAdjustersPanel.setPreferredSize(new Dimension(200,(screen.height-50)));
          ScalingAdjustersPanel.setLayout(new BoxLayout(ScalingAdjustersPanel,BoxLayout.Y_AXIS));
          ECGDisplayPanel.setLayout(new BoxLayout(ECGDisplayPanel,BoxLayout.Y_AXIS));
     sliderX=new JSlider(10,50,20);
     sliderY=new JSlider(15,50,15);
          sliderCount=new JSlider(4,10,4);
          ScalingAdjustersPanel.add(sliderCount);
          sliderCount.setBorder(BorderFactory.createTitledBorder("uV"));
          sliderCount.setMajorTickSpacing(2);
          sliderCount.setMinorTickSpacing(1);
          sliderCount.setPaintTicks(true);
          sliderCount.setPaintLabels(true);
          sliderCount.setVisible(false);
          sliderCount.addChangeListener(new SliderChange());
          ScalingAdjustersPanel.add(sliderX);
          sliderX.setBorder(BorderFactory.createTitledBorder(horizontalScalingSliderLabel));
          sliderX.setMajorTickSpacing(10);
          sliderX.setMinorTickSpacing(5);
          sliderX.setPaintTicks(true);
          sliderX.setPaintLabels(true);
          sliderX.addChangeListener(new SliderChange());
          sliderX.setVisible(true);
          ScalingAdjustersPanel.add(sliderY);
          sliderY.setBorder(BorderFactory.createTitledBorder(verticalScalingSliderLabel));
          sliderY.setMajorTickSpacing(10);
          sliderY.setMinorTickSpacing(5);
          sliderY.setPaintTicks(true);
          sliderY.setPaintLabels(true);
          sliderY.addChangeListener(new SliderChange());
          sliderY.setVisible(false);
          RbX=new JRadioButton ("horizontal Scaling",true);
          RbY=new JRadioButton ("vertical Scaling");
          RbCount=new JRadioButton ("height Of Tile");
          group=new ButtonGroup ();
          group.add(RbX);
          group.add(RbY);
          group.add(RbCount);
     ScalingAdjustersPanel.add(RbX);
          ScalingAdjustersPanel.add(RbY);
          ScalingAdjustersPanel.add(RbCount);
          RbX.addActionListener(new buttonSelected());
          RbY.addActionListener(new buttonSelected());
          RbCount.addActionListener(new buttonSelected());
          lineborder = new LineBorder(Color.GRAY,2,true);
          lineborder1 = new LineBorder(Color.RED,2,true);
          ScalingAdjustersPanel.setBorder(lineborder);
          JScrollPane Scroll=new JScrollPane(ECGDisplayPanel);
          contain.setLayout(new BorderLayout());
          splitPane.setOneTouchExpandable(true);
     splitPane.add(ScalingAdjustersPanel);
     splitPane.add(Scroll);
          contain.add(splitPane,BorderLayout.CENTER);
          setVisible(true);
public void windowClosing(WindowEvent evt)
          this.setVisible(false);
          this.dispose();
public void windowOpened(WindowEvent evt) {}
public void windowClosed(WindowEvent evt) {}
public void windowIconified(WindowEvent evt) {}
public void windowDeiconified(WindowEvent evt) {}
public void windowActivated(WindowEvent evt) {}
public void windowDeactivated(WindowEvent evt) {}
public class SliderChange implements ChangeListener
          public void stateChanged(ChangeEvent AE)
               Object sliderOBJ=AE.getSource();
               if(sliderOBJ==sliderX)
                    x= sliderX.getValue();
                    relX=(float)x/20;
               else if (sliderOBJ==sliderY)
                    y= sliderY.getValue();
                    relY=(float)(((float)y*count)/(15*4));
               else if(sliderOBJ==sliderCount)
                    count=sliderCount.getValue();
                    relY=(float)(((float)y*count)/(15*4));
               PanelAdjuster();
               ECGDisplayPanel.repaint();
               ECGDisplayPanel.updateUI();
public class buttonSelected implements ActionListener
     public void actionPerformed(ActionEvent e)
          JRadioButton slid1=(JRadioButton)e.getSource();
          if(slid1==RbX)
          sliderX.setVisible(true);
          sliderY.setVisible(false);
          sliderCount.setVisible(false);
          if(slid1==RbY)
          sliderX.setVisible(false);
          sliderY.setVisible(true);
          sliderCount.setVisible(false);
          if(slid1==RbCount)
          sliderX.setVisible(false);
          sliderY.setVisible(false);
          sliderCount.setVisible(true);
public class Simpanel extends JPanel
     public void paintComponent(Graphics g)
          g.setColor(Color.BLUE);
          for(int i=0;i<599;i++)
               g.drawLine((int)(time[i]*relX),(int)(Volt[i]*relY),(int)(time[i+1]*relX),(int)(Volt[i+1]*relY));
          Graphics2D g2=(Graphics2D) g;
     //drawing a rectangle
     double leftX=0;
     double topY=0;
          double width=x;
          double height=y;
               g2.setColor(Color.RED);
          for(int j=0;j<=count;j++)
               for(int i=0;i<30;i++)
                         Rectangle2D rect=new Rectangle2D.Double(leftX,topY,width,height);
                         g2.draw(rect);
                         leftX=leftX+x;
                    leftX=0;
                    topY=topY+y;
public static void main(String args[])
          ECGDisplay frame=new ECGDisplay();
Edited by: garlapati on Apr 7, 2009 10:18 AM

From the [custom painting tutotial|http://java.sun.com/docs/books/tutorial/uiswing/painting/index.html]:
Most of the standard Swing components have their look and feel implemented by separate "UI Delegate" objects. The invocation of super.paintComponent(g) passes the graphics context off to the component's UI delegate, which paints the panel's background. For a closer look at this process, see the section entitled "Painting and the UI Delegate" in the aforementioned SDN article.

CRM Header data not getting refreshed in BADI when clicked in New order

We have used a ORDERADM_H BADI, header badi to populate some custom field values.
Step 1) While creating sales order in CRM(CRMD_ORDER), we are giving inputs such as sold to party , material etc.
Step 2) Before actually saving the order, we found that we dont need this order to be created and again click on create new button in the transaction. In order header BADI, order data for the previous order is not getting refreshed. The previous GUID is still there and function module CRM_ORDER_READ still retrieves the old order values which was cancelled in the previous step. It is causing lot of issues and finally giving dump.
basically the previous GUID is not getting refreshed. Please suggest

Pls send the code that you have in the Badi. Did you actually compare the GUIDs manually ? Instead of CRM_ORDER_READ have you tried using CRM_ORDER_READ_OW ?

Tree Table is not getting refreshed properly in Jdev 11.1.2.0

Hi,
I am seeing a peculiar issue with tree table not getting refreshed in Jdev 11.1.2.0.
Let me explain you my use case.
I have a tree table in a page, where the first column is displayed as selectBooleanRadio component. When user selects this selectBooleanRadio component, that treetable node should get expanded and at the same time all the child records(I have a select boolean check box component(transient attribute) at the child level) for that node should get selected. This is to allow user to unselect the child records, which he/she does not want to process further(some functionality).
Now when the user selects any radio button, the tree table node is not expanded, but the arrow beside the radio button for that node can be seen as expanded.
I thought it may be a partial trigger issue, so i tried refreshing the tree table programatically as well. But it was of no use.
Then I set the partial triggers wrt to SelectBooleanRadio component on the parent container of the TreeTable. After which somehow the node got expanded but the tree table shrinks in width and the actual disclosure functionality of a tree table is lost.
The same use case works perfectly fine in Jdev 11.1.1.5.
For reference:
I created a sample test case(Dept/Emp) in jdev version 11.1.1.5, which works fine. Workspace: http://adf-use-cases.googlecode.com/files/TreeTable1.rar
But the same test case, when i created in jdev version 11.1.2.0, gives issues. Workspace: http://adf-use-cases.googlecode.com/files/TreeTableUseCase.rar
If you download the application and run in respective jdev version, you will get to know more about the issue.
Please let me know, If I am doing anything wrong in the implementation of this use case.
Any help/suggestions are appreciated.
Thanks
Umesh
Note: My complete application is in Jdev 11.1.2.0, so I can't degrade my jdev version to 11.1.1.5.

Thanks Frank for the reply.
But upgrading the jdeveloper to 11.1.2.2 is not an ideal solution for us now, because of the size of the project.
Some how, the issue of refreshing the tree table is resolved. I am using a command button with clientComponent to true and causing a full page refresh.
I am not sure, if this is a perfect solution.
As you said, that this behavior may be an issue with the Jdev version 11.1.2.0, I am using. I am going with the above said approach.

Values not getting refreshed in web report.

Hello Friends,
Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
IMS is the combination of all divisions and IMR is the combination of only three divisions.
In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
and using new selection we have restricted the divisions with IMS,IMN,etc.,
IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
IMN... all are with single divisions
Now we have assigned the query in the data provider for select options in hte web report,
But when we select any options the values of the remaining queries are not getting refreshed.
If we use the divisons directly with out using the structures the values are getting refreshed.
Can any one give me the solutions for this?
Regards
Srinivas

Hi Mansi,
Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
If the solution is not related to your question, please provide more details.
Thanks,
Rajesh

ADF Struts : Form not getting refreshed with new values

Similar Messages

Maybe you are looking for