UIInput will not refresh with new value

I have the following JSF component
<h:inputText id="entryfee" binding="#{entryform.evententryfee}" value=""/>
in a onchangeevent in another component I have the following
double entryfee = 100.0;
FacesContext mycontext = FacesContext.getCurrentInstance();
evententryfee.setValue(String.valueOf(entryfee));
evententryfee.updateModel(mycontext);
evententryfee is updated but the new value is not displayed by the component
How do I refresh the display to show the new value ?

Why do you use the component binding instead of a normal value binding?
You can write
<h:inputText id="entryfee" value="#(entryform.entryfee}"/>
Anyway, a component binding does not overwrite the attribute whichi is explictly specifed by the tag.
So, if you insist to use the component binding, you can write
<h:inputText id="entryfee" binding="#{entryform.evententryfee}"/>

Similar Messages

Spry Data Set will not Refresh with New Data?

I'm using the Dreamweaver CS4 "Spry Data Set" Wizard and created the following layout on one of my pages:
In the wizard, under "Specify a Data Source", I chose "HTML", and selected my cfm page that has a simple Table with the datasource below:
<cfparam name="URL.id_com" default="1">
<cfquery name="rsTickets" datasource="Ctickets">
SELECT ticketNum, ticketType, ticketDate, acctNum, firstName, lastName, businessName, city, status, owner, ticketDetails
FROM tickets
WHERE acctNum = <cfqueryparam value="#URL.id_com#" cfsqltype="cf_sql_numeric">
</cfquery>
When I display the page in IE8, The Spry Master/Detail page will not filter my records based on the URL parameter?
(Note: All my other "Non-Spry" datasets filter fine by the URL)
Question: How do I make the Spry data "Refresh" or "Re-run the query" so the data filters properly?
Thanks,
jlig

Ben, Thanks for the reply..
Here is my Source Data page which I created & selected in the Spry Data Wizard: http://cerberus.clearwave.com/jerry/Spry2.jpg
(this page takes my query, filtered by the URL Acct field and makes a simple table to feed the Spry Wizard)
- In the Spry Data Wizard, I selected the file and it properly found the table data: http://cerberus.clearwave.com/jerry/Spry3.jpg
- Then I clicked Next and changed a few of the field types: http://cerberus.clearwave.com/jerry/Spry4.jpg
- Next I chose Master-Detail and used the Acct field to be the Master : http://cerberus.clearwave.com/jerry/Spry5.jpg
- Lastly, I open up the webpage, click on the Tickets Spry Tab: http://cerberus.clearwave.com/jerry/Spry6.jpg
As you can see in the picture on this page: http://cerberus.clearwave.com/jerry/Spry6.jpg, the URL parameter is = 3902 which is the Acct number
being passed from the previous page in my application. (Ex..http://192.168.1.77/COE/salespipeline_mi.cfm?id_com=3902)
The first one is correct, but once I move to a different Acct number the Spry data will not update to reflect the correct Tickets?
Once I move to say, Acct 4413, the Spry Tickets Tab does not change or update to reflect this Acct's tickets?
(see link--> http://cerberus.clearwave.com/jerry/Spry7.jpg)
Here is my code listing for the Tabbed Webpage: http://cerberus.clearwave.com/jerry/Spry8.txt (see images 6 & 7)
It seems like I'm missing some kind of "Trigger" or "Requery" or "Refresh" that "Re-runs" the Source Data page (http://cerberus.clearwave.com/jerry/Spry2.jpg)..?
Thanks again,
jlig

The Jtree is not refreshing with new values when mouse click on the node

hi ,
I am creating a tree from a vector .The values in the vector is coming from the JTable data after satisfing the some condition. But the data in the Jtable is changing time to time so the data in the vector is also changing .
But the problem is that when first I create a tree with that data the tree is created but for the next time I click on the tree node the tree is not changing i.e. it is not created with the new values that is stored in the vector at that time .what to do .Please help
I am using DefaultMutableTreeNode for creating the tree .In starting I have created one root and the one it's child .Now the next subtree of the root child have to be created by this vector data. this subtree should be updated according to the values in the vecter.
public void valueChanged(TreeSelectionEvent e) {
//code here
subtreecreat();
//some function that create tree after cheching the some condition here
subtreecreat() {
Enumeration en=vector.elements();
while(en.hasMoreElements())
DefaultMutableTreeNode servername = new DefaultMutableTreeNode(en.nextElement());
node.add(servername);
Please help it is very urgent
Thanks in Advance,
anum

Well, you can either use a custom TreeModel that tracks your Vector, or you can use a DefaultTreeModel and call model.reload(node) to refresh the tree below the specified node.

JTable will not refresh with new data from database

Hi,
I have a JTable that does not recoginzed when the data has changed. The table is dynmaically populated with data from the database using a table model.
Please help!!
public JTable getUpdateContractTable() {
QueryTableModel model;
String [] dlrs = getSelectedDealers();
String [] stats = getSelectedStatuses();
String sql = buildContractQuery(dlrs, stats);
try {
if(isContractSet) {
model = new QueryTableModel();
model.setQuery(sql);
table.setModel(model);
table.setColumnModel(new UpdtCtrctColumnModel());
table.invalidate();
table.repaint();
//model.fireTableChanged(new TableModelEvent(model));
else {
model = new QueryTableModel();
UpdtCtrctColumnModel column = new UpdtCtrctColumnModel();
model.setQuery(sql);
table = new JTable(model, column);
table.createDefaultColumnsFromModel();
table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
table.setPreferredScrollableViewportSize(new Dimension(500, 70));
model.fireTableChanged(null);
isContractSet = true;
catch (Exception e) {
System.out.println(e.getMessage());
//JOptionPane.show
//.showMessageDialog("Error: " + e.getMessage(),
// "Click Ok",
// JOptionPane.INFORMATION_MESSAGE);
return table;
}

thank you for your help. i finally got it to refresh. i have a follow-up question if you don't mind answering it. i have 2 jtables where one depends on the other. when i do a refresh i want the other table to disappear, so i call the getContentPane().remove(component), but the table doesn't disappear. what should i do.
anthony

My ipod 5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

My ipod touch 3rd generation OS 5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I forgot my password and ipod will not sync with new computer

I forgot my password and ipod will not sync with new computer

You'll need to connect the iPod Touch to your iTunes library in recovery mode and restore it factory settings. There is no other way.
Here are instructions for getting your iPod touch into recovery mode.
http://support.apple.com/kb/ht1808
B-rock

Will not charge with new cable

I have an iPod classic 5th gen and it will not charge with any newer cables. Either apple or aftermarket. I have found it will charge when I hook up my Kensington battery pack and it charged with an older cable but I no longer have it. It's their something different about older units and charging accessories?

There is no difference. They are exactly the same. So it doesn't charge whether you plug it into an available USB port on your Mac or via a wall adapter?
Have you check to make sure the iPod's dock connector port was clean and clear of any sort of debris and/or damage such as bent, broken, or corroded pins?
B-rock

ADF Struts : Form not getting refreshed with new values

I have a view object based ona entity object. It has an additional attribute(calculated attribute) selected from some other table. In my browse page, I click on edit button and change the calculated attribute in the edit page and comeback to the browse page. In the browse page, the changed calculated attribute is not getting reflected. however the database has the changed value. Now, if I query the same browse page in a different browser window, it shows the changed value. But, still the original browser window shows the unchanged value only(even after refreshing the browser). So, this is server caching. Why is the application module not refreshing the bindings? What should be done to achieve the bindings refresh?

Did you look at:
http://radio.weblogs.com/0118231/stories/2005/06/16/whyIsntRefreshingTheBrowserPageEnoughToRefreshTheDataDisplayed.html

Z10 will not charge & with new Battery will not turn on

I have have had my Z10 about a month now, I am gernerally happy with it as a work phone which is similar to my private Iphone5. Unfortunately the Battry life has been reducing on a weekly basis to around 4 hrs between charges. Now it is dead and will not wake up, so I bought a new Battery, now it blinks once the three times but will not turn on.
Any ideas ? The OS is the latest on the Blackberry site, but as I can turn the phone on I can't be more specific.

Hello,
From your description, if your charger is "known good" (e.g., it can charge other devices), then one can only deduce that something (hardware) inside the BB related to passing power from the charger to the battery has broken. Or that something passing power from the battery to the device has broken.
Regardless, if your charger is 100% fine, then it sounds like a hardware problem for which no amount of OS/software level fixes nor internet-distance diagnostics can be of much value.
I recommend you seek formal support via your official warranty channel. Normally, that starts with your original place of purchase or an authorized service center -- it varies by region.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In KP26 excel uploading not happening with +new values+

Kp26 the users is doing thorugh EXCEL upload
wants to update NEW activity values even if Costs already posted ?
But manually we are able to delete the values and update, but for large employee turnovers
we cannt do it manually, so they are looking for update option which will
erase the current data and update the fresh ones?
the following error message appears when we try with delete button?
The following is the error message
Costs already posted under cost element SEC_ACT_CO. No deletion possible
Message no. K8098
Diagnosis
You want to delete business process or cost center/activity type 5000010114/LE6047.
However, you have already posted actual costs in version 0 in fiscal year 2011 under cost element SEC_ACT_CO.
System Response
The deletion may therefore not be executed.
Procedure
First reverse the posted record under cost element SEC_ACT_CO.
Alternatively you can set all fields to zero in the plan record you have just selected. This corresponds to a deletion of the activity types/business process quantity planning on object 5000010114/LE6047.
If the message appears several times in the error log, it could be that the actual records were posted under different transaction currencies. In this case, you must delete them all.
Edited by: melgibson on Feb 1, 2012 4:08 PM

thankx for the reply
But in our case the while we checked periodwise values are not the difference which are getting posting
rather 100 is getting multiplied with the old values.
the Acvtivity price was 10 for 01 to 12 periods we changed to 100
New value     old value      posted amounts
100     7.37     73.7
100     7.36     73.6
100     7.31     73.1
100     9.5     95
100     9.9     99
100     11.23     112.3
100     11.22     112.2
100     11.22     112.2
100     11.22     112.2
100     11.23     112.3
100     11.22     112.2
100     11.22     112.2
the user changes period values some times thats the reason above table shows different figlures
But as per the delta logic it should be as follows
New value     old value      User rquires
100     7.37     100
100     7.31     100
100     9.5     100
100     9.9     100
100     11.23     100
100     11.22     100
100     11.22     100
100     11.22     100
100     11.23     100
100     11.78             100
100     11.22      100
But here the requirement is little peculiar,
The user wants to update plan data , irrespective whether it is existing or not, with fresh
figures which should equally distribute periodwise (not according to delta logic) as shown above
all should become 100?
How that can be achieved?
Edited by: melgibson on Feb 3, 2012 11:59 AM
Edited by: melgibson on Feb 6, 2012 1:09 PM
Edited by: melgibson on Feb 15, 2012 8:43 AM
Edited by: melgibson on Feb 15, 2012 8:47 AM

IPod Classic 5th generation will not sync with new MacBook

I have had a 5th generation iPod classic that I have been super happy with. I have used it with several PC laptops. Because I have gone through so many PC's, I decdied this year to get a new MacBook Pro. Since my old PC was dying it took forever to get all my music and videos transferred to my new MacBook. Anyhow, I have had no luck syncing my iPod with my new MacBook. I have read several other posts (but mostly older like 2007-2010) that others have had similar problems. Here is a quick list of what I have done/what has happened:
Initially, I would get one of two messages:
'The ipod '(My Name) ipod' cannot be synced. An unknown error occurred (-124)'
- 'The ipod '(My Name) ipod' cannot be synced. The required folder cannot be found.'
Two times it told me I needed to use a USB 2.0 port (but I have a new MacBook and was using the newer 3.0 port). I haven't seen that message since.
It actually "transferred" over 4500 of my 7000 items (I have a ton of music that I use for my job) and then just stopped. When it was disconnected only about 200 songs were actually on my iPod.
I've restored it several times.
Seems to "freeze" on random songs or videos and will not continue to sync, even theough the iPod says it's syncing. Then iTunes freezes. I have to "force quit." Sometimes (but not all the time) if I try to re-open iTunes, I get a message that says iTunes is locked.
I thought maybe my cable was bad (it was the original that came with the iPod). I actually spent $20 and got a new one. No luck.
With the new cord iTunes now gets frozen on the 3rd or 4th song it is trying to transfer. Once I disconnect the iPod (I have to disconnect with ejecting because iTunes is frozen and it also freezes up Finder to eject) my iPod makes an awful click sound and I have to start it by toggling and then holding the play/pause button.
I have tried enabling disk, manually controlling music, etc. but nothing helps.
I am sick about it because I rely on my iPod a lot for my job-- and I can't afford a new one since I just bought a MacBook. I think it has something to do with the fact that I got this new MacBook. My old PC was getting so sensitive that I didn't download the latest version of iTunes (but I still had the second latest version).
Any help is appreciated.

Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day!

IPod will not sync with new laptop

Alright everybody, got a tough one here I can't seem to figure out. I have a 3rd generation iPod touch. I had it synced with my now secondary desktop that has my library and everything on it. I am now trying to get my iPod switched over fully to my new primary laptop. I am running iTunes 10.5 and iOS5. The iPod will sync fine with the desktop but when I try and sync and erase with my laptop absolutely no music will transfer over. I can click the device tab on the left and look at music and they are all grayed out as if they are ghost files. Does anybody have any suggestions? For the record I have tried to restore the iPod and set it up as a new iPod on the laptop but the music files still will not sync. I can go back and plug it in to my desktop and everything syncs fine. Thanks in advance.

Is your new computer authorized with the same account? About iTunes Store authorization and deauthorization
Did you try to transfer purchases and back up manually before your sync?
Connecting to a new computer will erase your device during the first sync. But you can use the manual backup to restore from afterwards. Make sure to have at least onwe contact and event listed on that computer as well, syncing to an empty address book will delete contacts and calendars on the ipod.
Also check your restrictions, to make sure app installation is allowed.

Windows 8 will not activate with new SSD (second) hard drive

I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.

Hi badgerbuzz,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Emoticons Will not display with new version

Downloaded the new version, and now the (finger) and (wtf) emoticons will not display. Every single other one does display. Why is this happening? I have tried restarting my computer, and redownloading Skype itself. Is there any way to fix this? I know I have the emoticons display on because every one BUT those ones work.
Attachments:
Capture1.JPG ‏16 KB

These hidden emoticons indeed got removed with 6.14 because of them or their shortcodes having the potential to offend some users. Here's some feedback from users wanting it back, so feel free to show your support there if you are passioante about them: http://community.skype.com/t5/Windows-desktop-client-Ideas/Restore-6-13-set-of-emotes/idi-p/2958795
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Wifi will not connect with new ios 7 update

I just downloaded the new ios7 on my ipad mini. I cannot connect to wifi now. It will not find a network and will not work when I type it in. I have tried shuting it down.

I have tried everything as well. I hard reset but still nothing. When I try to erase and reinstall it won't let me because it says no internet connection. If I knew there would be this many problems I would not have bothered with the update. Hopefully someone has some insight and help.

UIInput will not refresh with new value

Similar Messages

Maybe you are looking for