ADFf 11g, view does not refresh when model changes

Hi,
I am really missing something about adf faces (jdev 11.1.1.3.0).
I have a web app, with jspx, tabpanels and pojo data controls.
Since there is a complex logic to open new pages/tabs, sometimes I have to open new pages/tabs programmatically, and also sometimes I have
to refresh the model behind pages/tabs programmatically.
When I say "programmatically" I mean that the model refresh is not started by an user action on the webpage, but is started by logic in the model layer
(say, for example, you receive a JMS message and you want to reload the content of an entire page).
I can succesfully update the model, using debug println I can see the model is updated, but there is no way I can update the view.
I tryed with the "addPartialTarget" code and so on, but it does not work.
I've also bought and read "Oracle JDeveloper 11g Handbook" and "Oracle Fusion Developer Guide", but I can't find anything that can help me.
Can someone explain me: what am I missing? I am sure there is some concept in ADF Faces I missed: this framework is too
big not to offer what I need, so I miss something for sure.
I hope to get an answer, I hope Shay reads this too.
Thanks all.

Hi,
Active Data Services (chapter 20 in the book) is what would allow you to synchronize the screen with the model changes. The problem you face is because the data you see is what is stored in the iterators of the binding layer. An alternative solution to using ADS is to use an af:poll component that refreshes the display component when the model has changed. For this your model exposes a method that returns a time stamp that changes whenever the data has changed. Upon af:poll expiring, it calls a managed bean method, which - through the ADF binding layer - checks for the time stamp and compares it with a local saved copy (whenever the time stamp has changed, the client side will e.g. write it to the viewScope or pageFlowScope). If the time stamp has changed, the managed bean re-executes the method populating the iterator for the UI components and then issues a partial refresh of the component(s). Instead of PPR'ing each component in turn, you can try setting the ChangeEventPolicy property of the iterators to ppr"
This should solve the problem. The latter example is also explained in chapter 20, but for ADF BC
Frank

Similar Messages

Image does not refresh when I undo

This seems only to happen when using my Wacom. A lot of friends have the same problem.
The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
Anyone else having this issue? It seems like a nasty bug to me.

OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors.

Table or view does not exist when using in PL/SQL block

I hav something strange...
When i execute a query it works just fine... When i use the exact same query in a function i want to create, i get the error 'table or view does not exist'
I create the function with the same user then when i'm executing the query.
For example:
select name,userid from portal.WWLOG_ACTIVITY_LOGS
if i execute this... it works fine. I get my results.
However when i create a function:
CREATE OR REPLACE FUNCTION EBUSINESS.GET_USER_CREATOR (p_userid IN Varchar2) return VARCHAR2
as
/*CURSOR c_user_creator IS
select distinct name,userid from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;*/
v_creator varchar2(500);
v_ret_val VARCHAR2(500) := 'NOT_FOUND';
BEGIN
select userid into v_ret_val from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;
--v_ret_val := x.userid;
--end loop;
-- Is the user in the group or not?
/*OPEN c_user_creator;
FETCH c_user_creator INTO v_creator;
IF c_user_creator%FOUND THEN
v_ret_val := v_creator;
ELSE
v_ret_val := 'NOT FOUND';
END IF;
CLOSE c_user_creator;*/
Return v_ret_val;
END;
The table or view does not exist...
I tryed with cursor, select into, for x in (select....)
Nothing works.
A select grant is a select grant right? Are there different grant you should use so you can select it into a function or just do a normal select?
I also tryed to create a view that just sais select * from WWLOG_ACTIVITY_LOGS but that doesn't work...

Are there different grant you should use so you can
select it into a function or just do a normal select? Yes. Grants on objects used in functions/procedures must be given directly to the user, and not through a role.

Lighroom 5.4 Develop View does not update when changing sliders

Just updated to Lightroom 5.4 (using Adobe CC) on Win8. After going to "develop view" on any photo and changing the exposure or any other slider does not update the main view of the photo. It does however update the thumbnail in the film strip and the second monitor window correctly. I've tried everything I can think of:
(1) downgrading to LR 5.3 (which used to work)
(2) forcing 1:1 and standard preview regeneration
(3) uninstalling the re-installing Lightroom (both 5.3 and 5.4)
(4) Optimizing catalogue
(5) Removing the Adobe AppData folder
(6) Creating a brand new catalogue with zero photos, importing a single photo and trying to change exposure/contrast on that
None of these result in the develop view of the picture changing when I change the sliders.
Do you guys have any experience with this?

The chances of me suspecting monitor color profile causing bugs in LR was very slim. =)
So were mine, especially when only the view itself doesn't work, but all other stuff works fine. Well, I probably have really not good colour profile, luckly you can change it after the lr is launched - it won't cause the problem untill next restart (at least works for me). And hopefully once my calibrator arrives lr will work ok with its colour profiles..

IChart Trend does not refresh when NULL returned

I have a problem with an iChart displaying a trend. The chart receives data based on a selection from a dropdown box. Everything works fine as long as there is data, the trend updates correctly for the line selected from the dropdown. If, however, you select a line that is down, no current data available, then the iChart continues to display the trend from the last selection. These are based on a query that runs when a new selection is made and a button clicked.
When the page is first opened the iChart is blank until a selection is made. If the frame is refreshed, it refreshes the iChart to a blank state until a selection is made. What we need it to do is reset it to blank when no data is returned from the query, rather than caching the previous trend.
Any suggestions greatly appreciated.

Mark,
Three dashes (---) and 12/31/1969 dates are an indication that the InitialUpdate has been suppressed for the chart, meaning it doesn't run the query template. Because the query is time based, but does not actually run the query it has 'null' dates to display for the start and end.
There is currently no way to use JavaScript to tell the iChart applet to revert back to this state. Your best alternative may be to run a query that returns no values to display (something that doesn't produce a FatalError, which would lead to the 'No Data Available' message).
Regards,
Jeremy

Report does not refresh when link to page

I have a report on page 1 with a column link to a report on page 2.
The link sets items on page 2.
If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
The items on page 2 are select lists and text (always submit when enter pressed).
How can I get the report on page 2 to auto refresh without the user having to click the Go button?
Message was edited by: kgamble
kgamble

I can't post the pages (site reasons) but here's the debug.
All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
Any ideas?
Thanks
Kathryn
0.00:
0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.02: alter session set nls_language="ENGLISH"
0.02: alter session set nls_territory="UNITED KINGDOM"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-gb
0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
0.03: ...Supplied session ID can be used
0.03: ...Application session: 8392008407576157812, user=PENTESTER
0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
0.05: ...Metadata: Fetch page attributes for application 129, page 8
0.05: Fetch session state from database
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
0.06: Clear cache: request=RP
0.06: ...Resetting pagination for page
0.06: Clear cache: request=8
0.06: ...Clearing Cache for Page 8
0.06: Nulling cache for application "129" page: 8
0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.09: Show page template header
0.09: Computation point: AFTER_HEADER
0.09: Processing point: AFTER_HEADER
0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
Home New Complaint
Existing Data
Logout |
Complaints Complainants
0.14: Region: Complainant Search
Complainant Search
0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
SD Number
0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
NI Number
0.16: Region: criteria_go
0.16: Item: P8_GO BUTTON
0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
0.17: Region: Complaint Search
Complaint Search
The list of complaints must match ALL of these specified search criteria:
0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
Start
0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
End
0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
0.20: Item: P8_TARGET COMBOBOX
Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
0.22: Item: P8_RECUR COMBOBOX
Recurrent? -- All -- YES NO
0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
Payments -- Select -- YES NO
0.23: Item: P8_IDR COMBOBOX
Type of Complaint -- All -- IDR Other Complaint
0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
0.23: Computation point: BEFORE_BOX_BODY
0.23: Processing point: BEFORE_BOX_BODY
0.25: Region: Complaints List
Complaints List
0.25: show report
0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
0.28: determine column headings
0.28: activate sort
0.38: parse query as: GENERAL1
0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
0.39: binding: ":P8_START"="P8_START" value=""
0.39: binding: ":P8_END"="P8_END" value=""
0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
0.41: print column headings
0.41: rows loop: 15 row(s)
There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
0.42: Computation point: AFTER_BOX_BODY
0.42: Processing point: AFTER_BOX_BODY

Detail region does not refresh when selecting from a drop-down list in master region

I am using DW CS3 and have updated to version 1.6.1 of Spry. Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic. It works fine in this format (clicking on a row displays the correct graphic). However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list. Listed below is the code produced when I used the insert Spry Repeat List. I got the same results when adding a spry:setrow="dsChartNurse". I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
<div spry:region="dsChartNurse">
       <select name="select" spry:repeatchildren="dsChartNurse">
         <option value="{name}">{name}</option>
       </select>
</div>
<div id="image" spry:detailregion="dsChartNurse">
   <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
</div>
Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

Thanks for the quick reply. I did solve the problem I was having by changing from onclick to onchange in the master region. But, now I have another problem with, of course, IE. I just put in online at http://www.minursemap.org/ageDistNurse.html. When opened in IE, the drop down list displays the last entry, but the image is for the first in the list. Thanks again for your help.

Running Total does not reset when group changes

I have a manual running total for group3 that does not reset for group2
Group2 Header (Order Status 3=Open,4=Closed)
WhilePrintingRecords;
currencyVar WIP=0;
Group3 footer (Order Number)
WhilePrintingRecords;
currencyVar WIP;
WIP := WIP + {@NETWIP}
Group2 footer
WhilePrintingRecords;
currencyVar WIP;
There are no Repeat Group header on any of the groups
Will add Group1 total when this part works.

I am not sure if you made a typo when making your post but you are missing a colon when resetting your variable
change from this
currencyVar WIP=0;
to this
currencyVar WIP:=0;

Treetable does not update when plsql changes db

Hi,
I have a database table based VO. From this VO I create a treetable.
Now I use a pl sql procedure that I invoke from my UI that rollsup data that is shown in the treetable.
My problem is that a simple addPartialTarget statement on the treetable is not refreshing the data that is shown in the tree table after the rollup finishes and the results are written to the DB.
I also tried the sequence of these methods that I found somewhere.
vo.clearCache();
vo.refreshCollection(null,true,true);
vo.executeDetailQuery(masterRows);
This also did not work. On inspection of the code in these methods I saw that they operate on the default iterator (the later 2 calls). Hence my problem since treetable is supposed to have some internal iterators.
My question is how do I force the treetable to refresh itself in my scenario or more preceisely the VO to update the values in its cache and than the treetable partial target should be able to pick up these changes ?
Regards.

So here is the soln for all interested
After reading the documentation on refresh properties I saw the tip that the only way to refresh the iterators was to call execute on the given iterator.
This can be done as below :
// Tell the iterator to re-execute the query to get the new data
ControlBinding ctr = (ControlBinding) getBindingContainer().getControlBinding("YourTreeBindingNameHere");
CollectionModel model = (CollectionModel)this.yourTreeTable.getValue();
JUCtrlHierBinding hierBinding = (JUCtrlHierBinding)model.getWrappedData();
hierBinding.executeQuery();
// refresh UI to show the new data in the iterator above.
AdfFacesContext.getCurrentInstance().addPartialTarget(yourTreeTable);
Setting the refresh to any amount of properties would not have helped and indeed did not help as I tried it all out.
Sorry can't find the document page again for this post but you will find this tip where all the property values for Refresh attribute on the iterator are defined i.e. ifNeeded, prepareModel etc.

Find and replace in files does not refresh when changes are made

Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes

Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Desktop does not update when I change networks

I'm having this odd behavior that I hope someone can shed some light on.
My desktop is set to keep my icons arranged by name. All of my volumes appear on the desktop, as well. I've noticed in recent weeks that whenever I switch networks, my desktop stops updating. It happens when I unplug my ethernet at work and move to the wireless network, or when I pack up, come home, and connect to my wireless network at home. When I connect to a network volume or plug in my iPod, the icons do not appear on my desktop. Or, if I delete a file from my desktop, it leaves an empty space instead of rearranging the icons like I have it set to do.
I've found two ways to fix it.
(1) Relaunch Finder.
(2) Open the Desktop View Options (Command-J) and adjust the grid spacing.
Once I do either of these things, all of the icons rearrange appropriately and network volumes I've connected to since switching networks appear. However, on Monday, when I go in to work, I'll have to do one of those two things again.
Maybe it's just a nuisance, but I worry that behavior like this is a symptom of a larger problem. I can't think of any new software I've installed that might be causing this trouble. I've repaired permissions and deleted caches and all that stuff. Has anyone else experienced this problem?

Since changing the grid spacing fixes things, I don't think this is a switching network issue. It sounds to me like its a switching screen resolutions issue. I'm guessing that you have your machine plugged into a monitor at one location and not the other, or you have monitors of different sizes/resolutions at both locations. You can test this theory by simply changing your screens resolution once you get your machine into this state. If it fixes the problem, then I was right.
As far as a permanent fix, I don't think there is one. Only workarounds like you have already discovered.

ALV OO data is not refreshing when selection changes on previous screen

Hi All,
I have a module pool with 2 screens. First screen has plant and 1 button. When button is pressed in screen 1 the 2nd screen shows some data as per the plant selection in screen 1. The output of screen 2 is coded in OO ALV.
Now the problem is first time when plant is input and button is pressed the data is fine in screen 2. However 2nd time onwards the data is not getting updated on ALV when plant selection is changed! It gets stuck to the data it produced the very first time.
I've debugged the program and table which passes to method "set_table_for_first_display" is fine i.e. it selects new data everytime as per plant and fills this table. I've also tried GUI FLUSH, calling method "refresh_table_display", FREE, clear, unassign etc. etc. at diff. points but nothing seems to work
<b>I'll be generously giving away points with any help.</b>
Thanks.

Hi,
1. Please refresh the output table before the select query which you are passing to set_table_for_first_display.
2. The ALV container needs to be freed & again generated everytime you call the screen.
so on the BACK button of Screen 2 in PAI, release & clear the container
In the PBO of Screen 2, Assign grid to container.
Here is the sample program:
PROGRAM TEST.
DATA: OK_CODE LIKE SY-UCOMM,
      GT_SFLIGHT TYPE TABLE OF SFLIGHT,
      G_CONTAINER TYPE SCRFNAME VALUE 'BCALV_GRID_DEMO_0100_CONT1',
      GRID1 TYPE REF TO CL_GUI_ALV_GRID,
      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*       MAIN                                                          *
SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
CALL SCREEN 100.
*       MODULE PBO OUTPUT                                             *
MODULE PBO OUTPUT.
SET PF-STATUS 'MAIN100'.
IF G_CUSTOM_CONTAINER IS INITIAL. " Check this
    CREATE OBJECT G_CUSTOM_CONTAINER " DO this
           EXPORTING CONTAINER_NAME = G_CONTAINER.
    CREATE OBJECT GRID1 "DO this
           EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
    CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'SFLIGHT'
         CHANGING IT_OUTTAB        = GT_SFLIGHT.
ENDIF.
ENDMODULE.
*       MODULE PAI INPUT                                              *
MODULE PAI INPUT.
*   to react on oi_custom_events:
    call method cl_gui_cfw=>dispatch.
CASE OK_CODE.
    WHEN 'EXIT'.
      PERFORM EXIT_PROGRAM.
    WHEN OTHERS.
*     do nothing
ENDCASE.
CLEAR OK_CODE.
ENDMODULE.
*       FORM EXIT_PROGRAM                                             *
FORM EXIT_PROGRAM.
CALL METHOD G_CUSTOM_CONTAINER->FREE. " Do under BACK button
CALL METHOD CL_GUI_CFW=>FLUSH. "Do under back button
LEAVE PROGRAM.
ENDFORM.

ICal does not update when calendar changes are made on all my other devices. Prompt that the server does not recognize the password, but the password is correct.

I have an iPhone 5, iPhone 5s, MacBook Air and recently bought an iPad Air. Since I synced my iPad, my iCal on my Macbook no longer updates and every time I open it, this window appears even if I didn't change or forget my password. So I tried changing my password and still this window appears. I hope someone can help me. Thanks!

As if by magic it is now working. I went away from the mac for a couple of hours, came back and it started to work. This is scary as I would expect this kind of action on a Mickysoft machine but not a Mac. Ho Hum - at least the problem has been sorted even if I don't know how.
Chris

Play list in iCloud does not update when I change it on my computer

I have a play list that I have been adding songs to. (runs are getting longer) The problem is even if I click on the update iTunes match in iTunes the added songs do not appear on my other devices. In particular my iPhone. The play list on my phone still shows the old song count the playlist originally had. How can I get these songs to show up on my phone...I have 4 days to get this figured out before the marathon...

3rd generation iPods don't charge over USB.

Create materialized View fails with "table or view does not exist"

DB: 10.2.0.4
OS: Win 2003
Hi,
Here in my tests, i have 2 databases (A(source) and B(backup)), and i am trying to create an mview in database B to replicate data from one test table from database A, only for test purpose. I'm getting the error "table or view does not exist" when i try to create a mview with REFRESH FAST. Here is my code:
CREATE MATERIALIZED VIEW TESTES.TAB_TESTES_REPLIC_MVIEW_02
REFRESH FAST
START WITH TO_DATE('21/02/2012 18:50:00', 'DD/MM/YYYY HH24:MI:SS')
NEXT SYSDATE + 1/24/60
WITH PRIMARY KEY
AS SELECT REGISTRO1,
REGISTRO2
FROM TESTES.TAB_TESTES_REPLIC_MVIEW_02@DB_LINK_ORA10;
The dblink is workig fine(dblink user has select privilege on TESTES.TAB_TESTES_REPLIC_MVIEW_02), and i have created the mview log on database A.
Where is my mistake.
Thanks a lot.
Edited by: Fabricio_Jorge on 21/02/2012 19:06

I found the solution.
I had to grant SELECT on the mview log. The name is avaiable in DBA_MVIEW_LOGS

ADFf 11g, view does not refresh when model changes

Similar Messages

Maybe you are looking for