Report does not refresh when link to page

I have a report on page 1 with a column link to a report on page 2.
The link sets items on page 2.
If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
The items on page 2 are select lists and text (always submit when enter pressed).
How can I get the report on page 2 to auto refresh without the user having to click the Go button?
Message was edited by: kgamble
kgamble

I can't post the pages (site reasons) but here's the debug.
All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
Any ideas?
Thanks
Kathryn
0.00:
0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.02: alter session set nls_language="ENGLISH"
0.02: alter session set nls_territory="UNITED KINGDOM"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-gb
0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
0.03: ...Supplied session ID can be used
0.03: ...Application session: 8392008407576157812, user=PENTESTER
0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
0.05: ...Metadata: Fetch page attributes for application 129, page 8
0.05: Fetch session state from database
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
0.06: Clear cache: request=RP
0.06: ...Resetting pagination for page
0.06: Clear cache: request=8
0.06: ...Clearing Cache for Page 8
0.06: Nulling cache for application "129" page: 8
0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.09: Show page template header
0.09: Computation point: AFTER_HEADER
0.09: Processing point: AFTER_HEADER
0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
Home New Complaint
Existing Data
Logout |
Complaints Complainants
0.14: Region: Complainant Search
Complainant Search
0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
SD Number
0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
NI Number
0.16: Region: criteria_go
0.16: Item: P8_GO BUTTON
0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
0.17: Region: Complaint Search
Complaint Search
The list of complaints must match ALL of these specified search criteria:
0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
Start
0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
End
0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
0.20: Item: P8_TARGET COMBOBOX
Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
0.22: Item: P8_RECUR COMBOBOX
Recurrent? -- All -- YES NO
0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
Payments -- Select -- YES NO
0.23: Item: P8_IDR COMBOBOX
Type of Complaint -- All -- IDR Other Complaint
0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
0.23: Computation point: BEFORE_BOX_BODY
0.23: Processing point: BEFORE_BOX_BODY
0.25: Region: Complaints List
Complaints List
0.25: show report
0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
0.28: determine column headings
0.28: activate sort
0.38: parse query as: GENERAL1
0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
0.39: binding: ":P8_START"="P8_START" value=""
0.39: binding: ":P8_END"="P8_END" value=""
0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
0.41: print column headings
0.41: rows loop: 15 row(s)
There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
0.42: Computation point: AFTER_BOX_BODY
0.42: Processing point: AFTER_BOX_BODY

Similar Messages

  • RE: my input fields does not display when running the page

    my input fields does not display when running the page
    why is that so?

    Hi,
    Can you send the HTML code for us?
    Afonso

  • Image does not refresh when I undo

    This seems only to happen when using my Wacom. A lot of friends have the same problem.
    The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
    Anyone else having this issue? It seems like a nasty bug to me.

    OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
    However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
    I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors.

  • Detail region does not refresh when selecting from a drop-down list in master region

    I am using DW CS3 and have updated to version 1.6.1 of Spry.  Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic.  It works fine in this format (clicking on a row displays the correct graphic).  However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list.  Listed below is the code produced when I used the insert Spry Repeat List.  I got the same results when adding a spry:setrow="dsChartNurse".  I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
    When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
    <div spry:region="dsChartNurse">
           <select name="select" spry:repeatchildren="dsChartNurse">
             <option value="{name}">{name}</option>
           </select>
    </div>
    <div id="image" spry:detailregion="dsChartNurse">
       <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
    </div>
    Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

    Thanks for the quick reply.  I did solve the problem I was having by changing from onclick to onchange in the master region.  But, now I have another problem with, of course, IE.  I just put in online at http://www.minursemap.org/ageDistNurse.html.  When opened in IE, the drop down list displays the last entry, but the image is for the first in the list.  Thanks again for your help.

  • ADFf 11g, view does not refresh when model changes

    Hi,
    I am really missing something about adf faces (jdev 11.1.1.3.0).
    I have a web app, with jspx, tabpanels and pojo data controls.
    Since there is a complex logic to open new pages/tabs, sometimes I have to open new pages/tabs programmatically, and also sometimes I have
    to refresh the model behind pages/tabs programmatically.
    When I say "programmatically" I mean that the model refresh is not started by an user action on the webpage, but is started by logic in the model layer
    (say, for example, you receive a JMS message and you want to reload the content of an entire page).
    I can succesfully update the model, using debug println I can see the model is updated, but there is no way I can update the view.
    I tryed with the "addPartialTarget" code and so on, but it does not work.
    I've also bought and read "Oracle JDeveloper 11g Handbook" and "Oracle Fusion Developer Guide", but I can't find anything that can help me.
    Can someone explain me: what am I missing? I am sure there is some concept in ADF Faces I missed: this framework is too
    big not to offer what I need, so I miss something for sure.
    I hope to get an answer, I hope Shay reads this too.
    Thanks all.

    Hi,
    Active Data Services (chapter 20 in the book) is what would allow you to synchronize the screen with the model changes. The problem you face is because the data you see is what is stored in the iterators of the binding layer. An alternative solution to using ADS is to use an af:poll component that refreshes the display component when the model has changed. For this your model exposes a method that returns a time stamp that changes whenever the data has changed. Upon af:poll expiring, it calls a managed bean method, which - through the ADF binding layer - checks for the time stamp and compares it with a local saved copy (whenever the time stamp has changed, the client side will e.g. write it to the viewScope or pageFlowScope). If the time stamp has changed, the managed bean re-executes the method populating the iterator for the UI components and then issues a partial refresh of the component(s). Instead of PPR'ing each component in turn, you can try setting the ChangeEventPolicy property of the iterators to ppr"
    This should solve the problem. The latter example is also explained in chapter 20, but for ADF BC
    Frank

  • IChart Trend does not refresh when NULL returned

    I have a problem with an iChart displaying a trend. The chart receives data based on a selection from a dropdown box. Everything works fine as long as there is data, the trend updates correctly for the line selected from the dropdown. If, however, you select a line that is down, no current data available, then the iChart continues to display the trend from the last selection. These are based on a query that runs when a new selection is made and a button clicked.
    When the page is first opened the iChart is blank until a selection is made. If the frame is refreshed, it refreshes the iChart to a blank state until a selection is made. What we need it to do is reset it to blank when no data is returned from the query, rather than caching the previous trend.
    Any suggestions greatly appreciated.

    Mark,
    Three dashes (---) and 12/31/1969 dates are an indication that the InitialUpdate has been suppressed for the chart, meaning it doesn't run the query template.  Because the query is time based, but does not actually run the query it has 'null' dates to display for the start and end.
    There is currently no way to use JavaScript to tell the iChart applet to revert back to this state.  Your best alternative may be to run a query that returns no values to display (something that doesn't produce a FatalError, which would lead to the 'No Data Available' message).
    Regards,
    Jeremy

  • Link in Report does not work when run on Citrix

    Hello,
    we use Crystal Reports (v11) for creating Reports.
    Data is based on our CRM system "SuperOffice".
    We have several reports and what we did is to add a column that includes a link to SuperOffice.
    For example - if I have a list of contacts as a report, then every line has a link to SuperOffice.
    If I click this link, the contact in SuperOffice gets open.
    This works on lokal pc installations.
    But is doesn't work on a citrix server.
    If I click the link - nothing happens.
    Is that a known problem or does anyone have any ideas for that?
    Are there any known problems with links in reports on citrix servers?
    Thanks in advance.
    Best regards,
    Tony

    Hi Don,
    thank you for fast response.
    That is a good advice. We will check that.
    The main question is, to which folders etc. does CR needs access?
    To explain the situation better: To run the reports we use Crystal Reports Runtime (Version 11.1.1883).
    Do you (or anyone else in these forum) know where we could get information about which kinds of access CR Runtime needs to handle with these links?
    Regards,
    Tony

  • Interactive Report does not maintain / remain on current page

    Fellow APEX gurus,
    In my APEX application (APEX 4.0), I have an Interactive Report that displays rows of data and each row has an EDIT link which on clicking pops up a Form (Dynamic HTML Page) on top of the Interactive Report Report.
    The problem is -- when on the Interactive Report page, when I navigate to next page of records (Page 2 or above), and EDIT a row on that page, the resulting Form pops up correctly on top of the Interactive Report, however, in the background, the Interactive Report navigates back to Page 1.
    There is only one default branch on the Interactive Report page and I have "Save State before branching" checked.
    How do I maintain the current Page and not allow APEX to navigate back to the First Page of the Interactive Report?
    Thanks,
    Ed

    Mini,
    I already had the Reset Pagination Unchecked. I did uncheck the "save state before branching" but the behavior was the same.
    Once again, I have only one "Unconditional" Branch on this page with the following settings:
    reset pagination for this page - unchecked
    include process success message - checked
    save state before branching - checked
    Anything else to look for?
    Thanks,
    Ed.

  • Report does not refresh with SAP_BW_URL CMD='PROCESS_VARIABLES' ...

    Hello.
    We have web templates with custom button to change the selection criteria. Our HTML code has the following code:
    <input type=button name="refreshbutton"  value="Refresh"    onClick="RefreshView();">
    and
    function RefreshView(){
    url="<SAP_BW_URL CMD='PROCESS_VARIABLES' SUBCMD='VARIABLE_SCREEN'>";
    SAPBWOpenURL(url);
    When I execute the report for the first time with some selections, I get the correct result. Then I click on the button and get the selection screen where I change the values and click to execute the report with these new values. HOWEVER, the result is not updated, the table still holds the values from the first run BUT the values in the Selection Block show the newly entered values. Does anybody know what the problem might be?
    Thanks to all in advance.
    Irina

    Hi Irina,
    Instead of the "Process_Variables" command & "Variable_Screen" subcommand try just calling the same web template again with this:
    CMD=LDOC&TEMPLATE_ID=yourTemplate&VARIABLE_SCREEN=X

  • Find and replace in files does not refresh when changes are made

    Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
    There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
    Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
    Message was edited by: DMilkes

    Hi there
    To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
    As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
    On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
    As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
    Hopefully this helps... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • WebI XI 3.1 Report does not fresh in IE6 but it does in IE7

    Short Text    
    WebI Report Does Not Refresh in IE6    
    Long Text    
    BO XI 3.1 Windows Server 2003 x64, XP Desk tops with a mixture of IE6
    and IE 7.
    We have a universe with managed access rights enables at the group
    level. The groups we have are: Batu, AUS, and Admin. When someone logs
    in as TEST_USER_BATU (user is in the Batu group) the report does not
    refresh. The LOVs can be refresh but the report comes back blank. When
    we repeat the same work flow in IE7 the report comes back with data.
    We have repeated this test on several computers including the servers
    running IE6.       
    Steps for Reconstruction    
    1)Create Universe with managed access restrictions
    2)Restrict groups at the row level including LOVs (see below example)
    2.a) Batu Group
    2.b) AUS Group
    2.c) Admin Group
    3) Create restrictions for the Batu and AUS group only.
    4)Create generic WebI report applicable for all groups
    5) Run WebI Report using a different account for each account in
    different group.
    6) You will find that the users in the restricted groups can not
    refresh the report but the user in the admin group can run the report

    Hi all,
    Thanks for your responses but nothing seems to be working.
    @Mark, Sahil: The properties of the field  is set as type "DATE" in the universe.
    @Manpreet: Not feasible with timestamp data.
    @Anuj: I tried your solution. But it does not work. Its really weird. The date part of the string gets sorted but the time part does not. I have tried splitting the data into date and time into 2 seperate variables and then sorting them, but still the time does not get sorted. The time is also converted to 24 hour format. I have also tried removing the blanks in the data  between date and time and converting the same to number. No effect.
    Any other ideas?
    Kind regards,
    Minuj

  • 5800 does not displaying streaming links on real p...

    hi to all,
                      my 5800 does not refresh streaming links on real player, streaming lings are stored on memory card but real player keeps refreshing it .
    thanks to all

    Hi,
    I have the same problem.
    I was watching 3G TV on RealPlayer when suddenly RealPlayer crashed. This made the Home screen shortcuts disappear, and the Dial Pad and Contacts Pad stopped working.
    I managed to get the shortcuts back, and to recover the Dial Pad and Contacts, by deleting a file in c:\private (but I should not talk about this here).
    Anyway, now, the streaming links existing previously to the crash do not display, as the original poster says, the list refreshes itself but appears empty.
    The links are there though, because when I try to re-save the same link, RealPlayer creates a TV_H26401 link, as the TV_H264 link already exists.
    Is there a way to reset the list, or clear it, or to recover it? Maybe by deleting some hidden file which holds the list? No, I am NOT doing a soft or hard reset to solve this problem :-)
    Thanks in advance!

  • When I click on a link in an email, it does not automatically open the site page? When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

    When I click on a link in an email, it does not automatically open the site page?
    When I receive an email with a link in it, if I click on the link to open the page, nothing happens. It does not open the internet to that page.

    I don't appear to have a toolbar either.

  • When I open a second tab in Firefox, it does not go to my home page. Instead it goes to a page that displays what looks like a collection of pages (or links) t

    When I open a second tab in Firefox, it does not go to my home page. Instead it goes to a page that displays what looks like a collection of pages (or links) that I have visited in the recent or distant past. I would much rather have it go to my home page which is much more useful to me. I have tried to change this in 'Options' but with no luck. Please fix this.

    See also this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Maybe you are looking for

  • Editing Report through Report Painter

    Hi SAP Gurus, There is a Report Library in which a report is created for displaying Business Area Balance Sheet and another report for Business Area P and L. But the report for BA P and L is executed the report is appearing in 2 tabs in navigation pa

  • Extend Inventory Management (0IC_C03) with new field MSEG-INSMK

    Dear Experts, We are using Business Content InfoCube "Material stocks/movements" (0IC_C03) in Area "Inventory Controlling/Inventory Management" in BW. We are using following Business Content DataSources: Stock Initialization for Inventory Management 

  • Organizing photos within an event

    Is it possible to move around or relocate photos in an event. Example, I have a lot of old family photos I have copied both sides of and would like to keep them next to each other, front side photo & back side names on photo. Thanks

  • Using oracle thin driver from Weblogic server 6.1

    Hi I need to know which driver is best for establishing JDBC Connection i.e. whether to use JDriver provided with Weblogic or to go using Oracle thin driver. Can some one tell the detailed procedure involved in configuring oracle thin driver in Weblo

  • Help to download photoshop elements 5

    Hallo, I have trouble with adobe download. I have bought a new computer without the ability to run CD-ROM. Therefore the only way is by download the product through adobe.com. So, where and how can I download photoshop elements version 5? regards Mar