Scale definition for theme is out of range
Hi,
I am getting the following error when viewing a FOI layer using mapviewer javascript API
[oracle.sdovis.theme.pgtp] Scale definition for theme is out of range.
Once I've got this error, I need to restart oc4j again in order for the map to come up.
I've set the dimension info to -180<x<180, -90<y<90. I am able to see the theme in mapbuilder or perform spatial query. Any idea what might went wrong?
Thanks
I noticed the error is caused by not setting the initial map center and zoom level. Once I added the following code, the error went away.
mapview.setCenter(MVSdoGeometry.createPoint(-122, 37,8307));
mapview.setZoomLevel(4);
What I don't understand, however, is why can't I use FOITheme.zoomToTheme() to replace the code above?
Similar Messages
-
Repost: Oracle VM Manager (IndexError: list index out of range) error
The Oracle VM Manager software will not import a server side created VM for management purposes. It is giving an index-out-of-range error when trying to retrieve the Memory Size from the jumpbox.xen file (I created a symbolic link to this file called vm.cfg).
Here is the log for the index-out-of-range error:
ovs_root.log
"2008-08-20 02:03:26" INFO=> utl_list_dir: directory('/OVS/running_pool') => pro
jectweb/,infinesse-web/
"2008-08-20 02:03:26" INFO=> list_dir: directory('/OVS/running_pool') => project
web/,infinesse-web/
"2008-08-20 02:03:26" INFO=> utl_get_vm_size: vm('/OVS/running_pool/infinesse-we
b') => 12020
"2008-08-20 02:03:26" INFO=> get_vm_size:vm('/OVS/running_pool/infinesse-web') =
success:size=12020"2008-08-20 02:03:26" ERROR=> xen_get_memory:vm('/OVS/running_pool/infinesse-web
')=><IndexError: list index out of range>
"2008-08-20 02:03:26" INFO=> get_vm_memory: vm('/OVS/running_pool/infinesse-web'
) scope=cfg rs=failed:<IndexError: list index out of range>
and my vm.cfg file:
# -- mode: python; --
# This JumpBox requires Hardware Support otherwise known as Xen's HVM mode.
# To test your Xen installation if it supports this mode, issue the following
# command:
# sudo xm info | grep xen_caps
# it should return a capabilities line like:
# xen_caps : xen-3.0-x86_32 hvm-3.0-x86_32
# as long as there is an hvm entry as shown above it should work.
## If starting Xen fails you may need to set a custom path
## for your kernel or device model files. Uncommant the following
## variables and put in the appropriate paths
## Uncomment and set your custom hvm loader path here
# hvm_path = ""
## Uncomment and set your custom device model loader path here
# devmodel_path = ""
# You will probably want to uncomment the following VNC variables so you
# can see the JumpBox console over VNC. Make sure to set the vncpassword to
# something unique. Also, if you run multiple JumpBoxes on the same host, you
# may want to leave vncdisplay unset and use the domid for the display numbers
#vnc=1 # enable VNC library for graphics, default = 1
#vnclisten="0.0.0.0" # address that should be listened on for the VNC server if vnc is set.
#vncdisplay=1 # set VNC display number, default = domid
#vncconsole=1 # enable spawning vncviewer for domain's console
#vncpasswd='password' # set password for domain's VNC console
memory = '256'
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
########### You shouldn't have to edit anything below here ##############
import os
import sys
# Assemble the basepath
file = os.getcwd() + '/' + sys.argv[2]
basepath = os.path.dirname(os.path.abspath(file))
datatarball = basepath + '/disks/data/data.xen.tgz'
builder = "hvm"
hvmfiles = [
'/usr/lib/xen/boot/hvmloader',
'/usr/lib/xen-ioemu-3.0/boot/hvmloader'
devfiles = [
'/usr/lib/xen/bin/qemu-dm',
'/usr/lib/xen-ioemu-3.0/bin/qemu-dm'
# Check to see if the user has assigned custom HVM or device_model paths
try:
hvmfiles.insert(hvm_path,0)
except NameError:
pass
try:
devfiles.insert(devmodel_path,0)
except NameError:
pass
# Choose the appropriate HVM Loader
for i in hvmfiles:
if os.path.exists(i):
kernel = i
break
# Choose the appropriate Device Models
for i in devfiles:
if os.path.exists(i):
device_model = i
break
# Need to test if device_model and kernel are set, if not return with error.
# If this is the first time this has run, extract the data disk tarball
# then remove the tarball
if os.path.exists(datatarball):
os.chdir(basepath + '/disks/data')
os.system("tar -zxpf " + datatarball)
os.remove(datatarball)
# Continue normal configuration
name = "joomla15"
vif = ['type=ioemu, mac=00:16:3E:2B:1F:04, bridge=xenbr0']
disk = ['file:' + basepath + '/disks/root/root.hdd,hda,w','file:' + basepath + '/disks/data/data.xen,hdb,w']
root = "/dev/hda1 ro"
extra = "4"Hi Ravi,
the error is due to the componet JAVA(TM) 7 which is not supported.
Better to run JAVA 6, I'm running the update 33, you can download it from http://www.oracle.com/technetwork/java/javase/downloads/jre6-downloads-1637595.html
Remeber to remove JAVA &
Go to control panel --> add remove programs and remove JAVA (TM) 7.
It will solve the problem.
Ciao,
Massimo -
NI MAX throughput error and Camera attribute out of range
I recently purchased a Point Grey Grasshopper3 camera, it seems to work fine in the Fly Cap software point grey provides, but I get an error in NI MAX when I try to do a simple grab (shown below). This error shows up every time I try to grab an image the first time after opening NI MAX, even though throughput is set to the max. Then I change the throughput max under device control to any number around the max of 125000000, and the camera works fine for MAX. It will grab images as much as I need. Then I save the camera, exit MAX, open MAX again, it shows my saved settings, I go to grab images and I get the error again. So I change the range to whatever number and it works again in the same session in MAX.
I did have a point grey Zebra2 working fine, and was using it in my LabVIEW program with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns an error of camera attribute out of range from the camera configuration VI. The VI's I am using to test the camera is just open camera, configure acquisition, start acquisition, get image, unconfigure acquisition, and close camera from IMAQdx. I did twice open MAX, change throughput, save camera, close MAX without grabbing an image, and then was able to acquire images in LabVIEW on the first run. Then I would run the VI again and it would return the error for camera attribute out of range. I have changed the packet size, resolution, and frame rate of the camera with out noticing a difference in the errors.
Since I am able to stream images from the camera in point greys fly capture, and in MAX after toggling the throughput setting, it leads me to believe there is some sort of MAX/LabVIEW error preventing me from capturing the images.
Any ideas? Has anyone else had this issue with MAX and LV?
Solved!
Go to Solution.
Attachments:
MAX error.png 17 KBIt looks like Point Grey cameras have shown this error before based on out of date firmware. See this link for one such instance. I would monitor the camera file (*.icd) located in the IMAQdx data folder in Public Documents to see if the actual value is being overwritten after the camera configuration is saved in MAX. There is a chance that the GigE .XML file that is transferred from the camera is overwriting these values to the unacceptable value. See this link for a KB regarding this error, which leads me to believe this may be the issue.
Karl G.
Applications Engineer
ni.com/support -
We are trying to migrate our 10.6.8 wikis from the OS X Server to our new Mountain Lion OS X Server. I am using "wikiadmin migration -r <collaboration directory> -g <wiki name>" to migrate each wiki individually. We have about 30 wikis in the old server, three of which fail to migrate, all with the same problem (below). The process runs successfully for a while, but ultimately fails and rolls back the transaction. It appears there is some problem trying to generate a unique filename, perhaps for some of the uploaded files?
Has anyone else seen this error? large amount of pages, content, and attachments in these wikis and just recreating them in the new server would be a monumental task. Some of these attachments include videos and other large files, not sure if that might contribute to the problem.
=== wikiadmin migrate output log ===
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:233 7e7e1180 +0ms] Executing query [INSERT INTO entity (uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden) (SELECT uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden FROM master_entity_scratch_20120829T132314 WHERE entity_type_fk='com.apple.entity.File')]
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:181 7e7e1180 +151ms] Query result is [PGRES_FATAL_ERROR] rows returned=0/updated=
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Error>: [PGCConnection:148 7e7e1180 +0ms] Error in TXN: Error executing query [INSERT INTO entity (uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden) (SELECT uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden FROM master_entity_scratch_20120829T132314 WHERE entity_type_fk='com.apple.entity.File')]: ERROR: value "109120715161" is out of range for type integer
CONTEXT: PL/pgSQL function "uniquify_filename" line 7 at RETURN
PL/pgSQL function "trg_update_entity_filename" line 23 at assignment
0 CoreFoundation 0x00007fff93b67716 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff95aaf470 objc_exception_throw + 43
2 PostgreSQLClient 0x00000001026ff9ae -[PGCConnection checkResultOK:forSQL:] + 360
3 PostgreSQLClient 0x00000001026ffec3 -[PGCConnection executeQuery:] + 223
4 wikiadmin 0x000000010269d586 wikiadmin + 66950
5 PostgreSQLClient 0x00000001026ff5f7 -[PGCConnection transactionInBlock:onError:] + 147
6 wikiadmin 0x000000010269cd86 wikiadmin + 64902
7 wikiadmin 0x00000001026a025d wikiadmin + 78429
8 wikiadmin 0x00000001026924c8 wikiadmin + 21704
9 libdyld.dylib 0x00007fff912857e1 start + 0
10 ??? 0x0000000000000006 0x0 + 6
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:320 7e7e1180 +0ms] Executing update [ROLLBACK]Okay, so a little more detail for you…
If I can manage to restart the server without the wiki service on, everything else seems to work fine (including the web service running the default home page) and "serveradmin fullstatus wiki" will report that the service is stopped.
But as soon as I try to start the wiki service, it never finishes, and it prevents the web service from working properly anymore. i.e. I get a 502 Proxy Error instead of the OS X Server default home page. It's after the attempted wiki start that "serveradmin fullstatus wiki" starts to give the
serveradmin[2373:707] outstanding requests are: (
Command = getState;
Module = "servermgr_wiki";
Timestamp = "2012-10-25 16:22:15 +0000";
error. And then I can't stop the wiki service - even "serveradmin stop wiki" gives the same "outstanding requests" message.
This time I tried to stop the wiki from Server app and I got this error:
An error occurred on the server while processing a command.
The error occurred while processing a command of type 'getState' in plug-in 'servermgr_wiki'.
If it's helpful at all, I've notice the following in my log files that seem related, but I have no idea how to fix - it almost seems lie the migration of the wiki failed from 10.7 to 10.8:
collabd[767]: [CSConnectionPool:141 6a92000 +14027ms] Schema is STILL out of date (14 < 69) after launching wikiadmin, update failed! collabd will refuse to run until this is fixed.
I'm really pulling my hair out over here, and have no idea what to try next?
Anyone have any suggestions?
Thank you! -
Out of range...How do I know for sure?
Installed WRT150N wireless router between DSL modem and computer. No problem doing so using setup CD that came with the router. Solid intenet connection. (Wired)
Installed WMP300N wireless card in comp 100 feet away in another frame building. Also used setup CD that came with the card. Card seems to have installed ok. Also used Easy Link Advisor and Wireless Network Monitor - But Monitor Link Info Tab - has message...
"Cannot Associate with the Access Point."
Signal Strength box is blank
Link Quality box is blank
On Profiles Tab -
Profile and wireless network name fields are blank ( Empty)
"Scan" or "Connect" works but produces nothing.
Monitor states adapter is Active; green light on back of card is blinking. (Scanning)
It's like there is no wireless signal anywhere close!?
I don't know what's going on. I used the main wired comp to "try and Add" the computer to the network but that didn't work either.
I can't find a thing wrong and have spent hours reading FAQ's. Woof, no joy.
It looks to me like the comp/wireless card is just too far away from the wireless router to pick up a signal from it or a firefly has more power in his little butt!? Beats me but it's "wireless N" technology ( touting ideal conditions of 1400 feet line of sight ) and its totally out of range at 100 feet ... between two frame buildings?
Any ideas? I would like some sort of prize offered to the person that has actually connected with the most distance between them/their comp and the wireless router. I know 100 feet is no joy. Anybody have a connection at 95 feet? Raise your hand! I'd like to know..I bet a lot of us would!
(Hey linksys, what I gotta do...Load the comp in a wagon towing an extension cord to see how close I can get to the router before the card finds a signal and connects? (Now theres an idea! Makes me wish I had a lappy.) The up side is the security...one might be able to park over this router and not get a connection. Hahaha
( Don't jump on me...respect your elders..I'm 60 with a tricky ticker! Not doing my blood pressure any good...)
Ain't this supposed to be an excellent brand...You don't like "ain't", Ok...arsn't this supposed to be an excellent brand of equipment?
Does this sound like out of range to you? Anyone?
Thanks,
ThuOn router change radio band to standard, and standard channel to 11. Change advanced wireless settings : change beacon interval to 50, fragmentation threshold to 2306, RTS threshold to 2307, DTIM to 2. On computer instead of using linksys WLAN monitor, switch to windows XP's client WZC. It might connect after that.
-
I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. We are taking a long flight this week, and I wanted to have something new to watch. I've read through lots of threads on this but I can't seem to find a good solution that I haven't tried.
If I can get them to download them on my iMac computer, can I then transfer them to my iPad? How is this done? (Please pardon an older lady's ignorance, and thank you for any assistance!)
JodyHello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
Adjusting curves for "out of range" keyframes
Is it possible to view and edit keyframes in the timeline graph editor
that are out of range of the composite duration (negative frame
or greater than final frame)?
I have been adjusting the beginning and end of the active work area,
and extending the overall duration of the composite in order to
keep out of range keframes within the timeline graph editor view.Is it possible to view and edit keyframes in the timeline graph editor
that are out of range of the composite duration
Nope, unfortunately not. Since the GE is just a different timeline representation for better or worse, it shares the same limitations.
Mylenium -
Data truncation: Out of range value adjusted for column
I encountered the following error while working thru "Creating Your First LiveCyle ES Application" and have not been able to find a solution. Any assistance would be greatly appreciated.
javax.ejb.TransactionRolledbackLocalException: Data truncation: Out of range value adjusted for column 'loanamount' at row 1; CausedByException is:
Data truncation: Out of range value adjusted for column 'loanamount' at row 1
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:247)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:335)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:166)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy284.writeObject(Unknown Source)hmm, i have sloved the error already. I have make my longtitude double(40,20).
-
I want to download a tv show but all the season havent come out yet and so half the season is unavalible. When they come out can Ijust download them straight away or will I have to pay for them again even though im buying the whole season?
Once you pay for a season, you get the entire season as it is released.
-
PCC-F-02044, CMD-LINE: Illegal or out of range value for option
Good day,
I very new to Pro*C and its compiler, i was tasked to recompile a program from a previous developer and got stuck with the above mentioned problem.
The command i'm using to compile the program is: proc xxx.pc
This returns the illegal or out of range value error
#include <iostream>
#include <fstream>
#include <string>
#include <stdio.h>
#include <sqlda.h>
#include <sqlcpr.h>
#include <sqlca.h>
#include <stddef.h>
using namespace std;
char myfile[60];
char puk [][];
int last_col = 0;
int last_row = 0;
int line_nr = 0;
string line = "";
int main(int argc, char *argv[])
if (argc != 2)
return(1);
ifstream myfile;
myfile.open (argv[1],ios::in);
if (myfile.is_open())
while (! myfile.eof() )
//while(getline(myfile,line))
getline (myfile,line);
line_nr++; //counting number of lines
line = trim(line); //remove whitespaces
if (line == "\r" or line.length() == 0) {
continue; //ignore blank lines
if (line_nr == 1) {
last_col = 1;
last_row = 0;
puk [last_row][last_col] = line;
} else if (line_nr > 1 && line.substr(1,3) != 'OOF') {
last_col = last_col + 1;
puk [last_row][last_col] = line;
} else {
last_row = last_row + 1;
puk [last_row][1] = line;
myfile.close();
line_nr = 0;
return 0;
Any assistance will be appreciated.
Regards,My pcscfg.cfg file is set as follows:
sys_include=(/usr/include/c++/4.1.1/iostream,/usr/include/c++/4.1.1/backward/iostream.h,/usr/include/c++/4.1.1/fstream,/usr/include/c++/4.1.1/backward/fstrea
m.h,/usr/bin/strings,/usr/include/string.h,/usr/include/strings.h,/usr/include/stdio.h,/usr/lib/syslinux/com32/include/stdio.h,/oracle/client/9.2.0/precomp/p
ublic/sqlda.h,/oracle/client/9.2.0/precomp/public/sqlcpr.h,/oracle/client/9.2.0/precomp/public/sqlca.h,/usr/include/linux/stddef.h,/usr/lib/gcc/x86_64-redhat
-linux/4.1.1/include/stddef.h,/usr/lib/syslinux/com32/include/stddef.h,/usr/lib/syslinux/com32/include/bitsize/stddef.h,/usr/include,/usr/lib/gcc-lib/i386-re
dhat-linux/2.96/include,/oracle/app/oracle/client/precomp/public,/user/include/g++-3)
ltype=short -
Pin definition for TV OUT Connector (C&S)
I`ve bought graphic card MSI GeForce4 Ti4200 TD 64MB but there was no the cable for TV connecting. I`ve bought the cable, but it does not work. Do anyone knows the pin definition for " TV_OUT Connector (C&S)", because I can`t find it in user`s guide.
Could you help me? I own a FX 5200 8907 TD128, and the 4 pin S-Video outputs B&W image. The card came with a S-Video to RCA cable, but it isnt useful. Software setting doesnt have an effect. When in the POST the TVoutput is enabled by default and it outputs color images!. Changing PAL from NTSC doesnt have an effect. I did this with 2 RCA TVs and with a VCR. Still Black and White!!!.
I thought i had to buy a new cable but in the setup or during Windows load the outputs works good. May it be a VGA BIOS problem???
PLEASE HELP -
When I'm out of range for Wi-Fi on iPad, can I use the Internet connection from my iPhone 5?
I only get Internet on my iPad when I have my wireless router. When I'm out if range can I piggyback with my iPhone5? If so, how.
Yes, you can use the hot spot feature of the iPhone 5 to create a WiF Access Point.
See here in Chapter 33 Settings http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
Numeric value out of range (null) - Inserting a double
Allright,
I can't figure this out to save my life.. I am refusing to put my code up because I am trying to insert into a DB Table with 140 some fields, so I will explain as best I can.. I am trying to insert a double into my DB.. I have been getting a numeric value out of range error on insertion. Just to see if it was a db problem, I shortened my query to 4 fields and two of them being the doubles for insertion. They inserted fine. So needless to say, i presumed that my insert statement for the 140 fields query was off. I double checked it and everything seems to be in order. I still get the error. I can assure that everything matches up.. my SQL string looks like this :
SQL = "INSERT INTO TABLE 1 (VAL1, VAL2, VAL3 ... VAL146) VALUES (?, ?, ? .... ?);
and my preparedStmt :
ps = con.prepareStatement(SQL);
ps.setInt(1, val1);
ps.setInt(2, val2);
ps.setString(3, val3);
ps.setDouble146, val146);
ps.executeUpdate();
Please help me solve this..
EdThe name of the table is FAC.
Here is the query:
INSERT INTO FAC (FAC_SK, KEY, ACTIVITY, BE_NUMBER,CATEGORY, CC, CLASS_LVL, CONDITION, COORD_BASIS, COORD_DATUM, COORD_DERIV,DOMAIN_LVL, EVAL, GRAPHIC_CC, GRAPHIC_ED_NUM, GRAPHIC_SCALE, GRAPHIC_SERIES,LAST_CHG_USERID, MIDB_TIMESTAMP, OPER_STATUS, OSUFFIX, PROD_LVL_CAP,PROD_LVL_REQ, RECORD_STATUS, RES_PROD, COORD, DATETIME_CREATED,DATETIME_LAST_CHG, FAC_NAME, GRAPHIC_AGENCY, GRAPHIC_ED_DATE,GRAPHIC_SHEET, REVIEW_DATE, ACCESS, AFFILIATION, AIR_DEF_AREA,ALLEGIANCE, BE, CAPACITY, CAPACITY_EVAL, CAPACITY_MAX, CAPACITY_UM,CLASS_RATING, CMD_CNTL_COMM, CODEWORD, CONDITION_AVAIL, CONTROL_MARK,COORD_DERIV_ACC, COORD_DERIV_ACC_UM, COORD_ROA, COORD_ROA_CONF_LVL,COORD_ROA_UM, CPFL, CRITICAL_INDUSTRY, DECLASS_ON, DEGREE_INTEREST,ELEVATION, LAT, LON, ELEVATION_ACC, ELEVATION_CONF_LVL, ELEVATION_DATUM,ELEVATION_DERIV, ELEVATION_DERIV_ACC, ELEVATION_DERIV_ACC_UM, ELEVATION_MSL,ELEVATION_MSL_ACC, ELEVATION_MSL_CONF_LVL, ELEVATION_MSL_DERIV, ELEVATION_MSL_DERIV_ACC,ELEVATION_MSL_DERIV_ACC_UM, ELEVATION_MSL_UM, ELEVATION_UM, FOREIGN_TECH_CC,FOREIGN_TECH_PERCENT, FPA, FUNCT_PRIMARY, FUNCT_SECONDARY, GEOIDAL_MSL_SEPARATION,GEOIDAL_MSL_SEPARATION_UM, ILAT, ILON, INTEGRATION, LINE_QTY, MED_DIAGNOSTICS,MED_MASS_CASUALTY, MIL_AREA, MIL_GRID_SYS, MODERNIZATION, MSN_PRIMARY, MSN_PRIMARY_SPECIALTY,MSN_SECONDARY, MSN_SECONDARY_SPECIALTY, OPEN_STG_COVERED, OPEN_STG_FILLED, OPEN_STG_TOTAL,OPEN_STG_UM, OUTPUT, OUTPUT_EVAL, OUTPUT_MAX, OUTPUT_RATE, OUTPUT_UM, PERIODICITY, PIN,POL_SUBDIV, POP_AREA, POP_AREA_PROXIMITY, POWER_DISTRICT, POWER_DISTRICT_SUB, POWER_SOURCE,RECUP_INTRVL, RECUP_INTRVL_MAX, RECUP_INTRVL_UM, RECUP_LOSS_IMPACT, RECUP_REPAIR_PRIORITY,RELATIVE_RANKING, RELEASE_MARK, ROLE_LVL, ROLE_TYPE, SCALE, TDI, TGT_RESTR, TURN_AROUND_TIME,WAC, WATERBODY, ADDRESS_NAME, CAPACITY_DATE, CAPACITY_EVAL_DATE, COORD_DATETIME,DATETIME_BEGIN, DATETIME_END, DATETIME_FIRST_INFO, DATETIME_LAST_INFO, DECLASS_ON_DATE,LOC_NAME, MAX_DEMO_USE, MIL_GRID, OUTPUT_DATE, OUTPUT_EVAL_DATE, PLACE_NAME, POSTAL_CODE,SCENARIO_SET, STREET_NAME, STREET_NUM, SYMBOL_CODE, UTM) VALUES(?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?);
The query works fine if I have no value for the two doubles : LAT and LON..
If I have a value for them, the thing gives me an error:
Numeric value out of range (null)
If you see anything wrong with that query.. Let me know..
Takizzle -
"The dimensions of this page are out of range"
Hi,
I'm having some trouble opening some pretty big posters I was creating. They contain some non-vector image files, so I decided to design them at the full size, rather then scale up in the end. Although a bit slow with size lag it was not an issue. In fact I have saved and re-opened them a few times with no trouble.
Now however, I made an edit to a single background psd file in photoshop (it's now smaller in size) that runs consistent through all 10 of the posters. I went in to update/edit each file again, and saved them no problem. Upon attempt to reopen I am sporadically getting the error "The dimensions of this page are out of range." Some files have this, others don't. One didn't have it, then a close and reopen brought it on.
I did a few searches here and elswhere and everyone seems to recieving this error when TRYING to save. Not after saving has already happened.
Does anyone have any suggestions to getting these files working again?I'm currently trying to save an Illustrator CS4 document with two artboards to PDF (artboard #1 is 176.81in x 123.41in, artboard #2 is 206.0in x 66.08in), after finishing the Progress dialog "Saving...", an error dialog appears exclaiming "The dimensions of this page are out-of-range". These sizes are already the least I can have, what am I to do for it to properly export to PDF? (It has problems exporting to JPEG as well, but let's try to figure out one problem at a time.)
Any help will be greatly appreciated. Time is of the essence. -
My phone stopped working randomly a couple of days ago. I cant send or receive texts or calls. In the corner where the signal is, changed from edge/GPRS to GMS now it's just constantly on SOS. I've tried going into mobile network options and switching network and then switching back and it's saying that my mobile network is out of range? I've also tried doing a battery pull and doing a security wipe which just deleted all my contacts I've been in contact with my mobile network and they told me try the SIM in another phone, and that worked so it's definitely a problem with the phone rather than the network. Any idea how I can fix this?
Hi and Welcome to the Community!
El_Perro_Fitz wrote:
I've also tried doing a battery pull and doing a security wipe which just deleted all my contacts
Oh that's a shame. Of course, it's exactly what that action is supposed to do...
El_Perro_Fitz wrote:
I've been in contact with my mobile network and they told me try the SIM in another phone, and that worked so it's definitely a problem with the phone rather than the network.
And they stopped helping you at this point? That feels like a terrible fob off to me. You see, you pay them for 100% of your service and 100% of your formal support. Right now, they seem to be delivering neither to you...you should be very upset (with them) about that. If you continue to pursue with them, they will have the power to escalate into RIM for enhanced support to you, and at no charge to you...that's their responsibility indeed, to stay with the issue from their paying customer until the issue is resolved one way or another.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
It wont charge for anything,all that comes up is the dead battery sign,but when i can get it to turn on it shows in the corner its fully charged. I dont know what to do about it. My ipod 5 generation has glitched before in the past but i dont know if
-
Reinstalling Audition after Windows 7 crash/corruption
My Audition CS5.5 went down after a Windows 7 blue screen crash and won't run now. I understand that I'm entitled to reinstall it from Adobe's web site but would like to know how to do that. I hope reisntalling will fix the problem, which is the la
-
Can't open quicktime movie that I exported from Motion 5 and can't import to FCP
Can't open quicktime movie that I exported from Motion 5 and can't import to FCP 7. I exported (with current settings) from Motion 5 now i can't view my movie with QT Player an FCP won't recognize it. That's the message I get ? I'm running Mac OSX bu
-
Error connecting to Oracle 11g Database
Hi All I am testing .NET connectivity to Oracle 11g and I am not successful for a while. I've tried to connect to database using library included in Oracle 10.2.0.3 Client and as a result I've got "invalid username or password" error. Then I've tried
-
CRMD_ORDER: how to set default values for Requester and Change Manager
Hello Folks, how do I set default values in TA crmd_order? I drew my organizational hierarchy using TAs bp and ppoma_crm. When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer)