Adjusting FIN and CAP buckets when planned start changes

Hello,
I have a task to update the financial and capacity buckets when the planned start date of a project is changed. For instance, if the planned start date is moved out two months I need to move all of the data in the buckets out two months and clear the original buckets. I am writing a function module that will be triggered when the /RPM/ITEM_MODIFY function module is executed and the start date has changed. My function module will execute the following:
/RPM/CAP_GROUP_GETLIST (to get the original data)
...custom code to build the table of adjusted data to be passed to the next FM
/RPM/CAP_GROUP_MODIFY (to update the buckets after I have adjusted the data)
/RPM/SAVE_CHANGES
Is anyone aware of a function module that will give me the appropriate entries required for the IS_CONTEXT parameter when executing /RPM/CAP_GROUP_GETLIST. I believe I need the 'Parent GUID', 'Object type' and 'Object GUID'.
The appropriate function modules would be used for the same process to update the Financial buckets
Thanks in advance for any direction that you can give me.
Pat

parent_guid should be item guid
object guid should be category guid - so you need to fetch all categories first
object_type should be for item
Regards,
Anuradha

Similar Messages

Hi I bought Photoshop Elements 12 and Premiere Elements 12th The installation went fine (Opsys Vista). When I start the program I come to Sign In. I enter an Adobe ID

Hi I bought Photoshop Elements 12 and Premiere Elements 12th The installation went fine (Opsys Vista). When I start the program I come to Sign In. I enter an Adobe ID and password, login starts but nothing more happens without it just waiting for an answer. greetings Nils Bellner
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]

it sounds like you may have already gone through some of the options here,
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
but this is the most complete troubleshooting guide for that issue. go through all the options or contact adobe support, http://helpx.adobe.com/contact.html?product=flash&topic=using-my-product-or-service

Require function module for start and end bucket of planning book

Hello All,
I need to fetch the start and end bucket date of a planning book. Is there any function module which can directly give first and last bucket date of a planning book ?
Thanks & Regards,
Vivek

Hello dear Sanjeev / Datta,
Thanks for your prompt response.
The problem resolved. The solution is as follows.
Step1) CALL FUNCTION '/SAPAPO/MSDP_PB_READ_DVIEW'
            Input : Plng book and dataview
            output: cs_pbdvwhdr       = ls_header (in changing parameter)
Step2) CALL FUNCTION '/SAPAPO/SDP_TB_CREATE_COLS'
            Input: bucket Profile of past and future, which we will get from step1.
                      And from date as space in a variable of type datum (As the parameter is mandatory)
            Output: et_cols_ext (Importing table) which will give start and end date.
Hope, This solution will help others also.
Thanks & Regards,
Vivek

Why does my computer create web connections to addresses in the Amazon, Google and Youtube range when I start Firefox?

I think I already disabled all the updating functions, yet, SOMETIMES when I start Firefox, (with about:blank), my network monitor shows one to five connections to IP addresses mostly in the 74.125.225.x, 74.125.227.x, 74.125.228.x, and 72.21.x.x ranges. Those ranges include Google, Amazon, and Youtube.
I use Kaspersky, and have scanned multiple times for malware, and even had their technical support look into my computer. They see no malware. It is the Kaspersky Network Monitor that revealed the problem.
As I find them happening, I try to jot down the addresses, (quickly, because some of these connections only last a second or two), then add those to a firewall rule I created to try to combat the problem. Yet, next time I start, new addresses are "attacking". Of course, some get away, because I don't get the address jotted down before it goes away. At one point I used masking that ended up keeping me from Google and Youtube, so I have to add the addresses individually, and my block list in that one rule is 13 items long now. The only IPs not in those ranges are 23.5.251.27, and 173.194.46.5. Not sure where those go.
I used to get attacked by addresses in the range that includes Amazon ... 72.21.x.x. I have a separate firewall rule for them that has 33 addresses being blocked.
I should not have to do all that. Firefox should start and just sit there quietly until I start clicking or typing in it. This has been happening in Firefox versions going back to 11. May have gone on before that, but I wasn't tracking it then.
Also, it doesn't always happen, or, more precisely, with addresses I have not already blocked, (because my only way to know it's happening is when the connections are allowed to be made). It does not always happen right after Firefox is up, but sometimes several minutes later. I have started Firefox and just sat and watched the network monitor without doing anything in Firefox, and have seen this happen up to 15 minutes after I start Firefox ... mostly just two or three minutes when there's a delay at all.

Firefox does not do anything but sit on about:blank after I start it as long as I have a firewall rule enabled that completely blocks these subnets:
74.125.222.0/24
74.125.227.0/24
74.125.228.0/24
173.194.46.0/24
173.194.115.0/24
173.194.121.0/24
64.233.171.0/24
54.230.90.0/24
54.230.88.0/24
72.21.194.0/24
72.21.195.0/24
72.21.215.0/24
207.171.163.0/24
Otherwise, Fire fox creates connections to one to five addresses in those ranges. Note that there are more than 5 subnets above, but usually three connections satisfies whatever purpose these connections are being made for. If I had some links or whatever that is causing these connections, I would expect all of them would come up every time.
Also, these connections do not start immediately upon starting Firefox, they wait up to 15 minutes to start ... fifteen minutes of just sitting idle ... no actions on my part that could possibly initiate them. Usually these start within three minutes. A typical ploy of malware is to wait until no one is looking, or the until there's a forest to put their tree in so it won't be noticed.
While the above rules are in place, I do not have access to Amazon, Youtube, or Google, (or any of the various blog sites and services sponsored by Google, including Google Maps and Gmail). That list may not be complete, as I have other firewall rules in place that mainly block individual addresses.
It seems to me as simple as; figure out who owns those subnets, and you have your bad guys. Then go after them.
It's true that I have a bookmarks to Google, Gmail, and Youtube, but these are not "active" bookmarks nor RSS feeds. I have not voluntarily gone to Amazon on this computer.
The traffic being transmitted is unknown. It is usually not extremely large amounts of data ... less than a meg, but I have seen close to a Gig transmitted out of my computer, and over 400 meg transmitted to my computer, when I was not paying attention to block the offender. Even if it's small amounts, things like cookies, path structures, configuration settings, histories, etc. do not involve a lot of data, but, to me, represent a security breach, if someone decides to look at them unsolicited by me, not unlike your landlord, mortgage holder, or neighborhood police officer walking into your home while you're not there, and taking pictures of, or simply inventorying your belongings.
It is VERY much like some sort of backdoor malware. No malware is detected on my computer.
I looked at the suggestion above for OS changes for logging HTTP activity, but the author neglected to include instructions for backing out these changes after using them. If this were to create more jewels in a drawer the thief has access to, reformatting and restoring my drive is not the kind of back out process I enjoy. Therefore it would be foolish to apply them. To me it would be like bungee diving with no bungee. Fun until you hit the bottom. Give me the bungee, let me make sure it's short enough, then I'll dive.

Can Lion be set so iCal will open and display calendar when computer starts

I have Lion and the new iCal on a MacBook Air purchased a few weeks ago. I set iCal as one of the applications that opens when I login in the Users & Groups in System Preferences. So iCal opens when I start the computer (automatic login to the single user I have set up) but it doesn't open the calendar page. I would like to have the calendar page open up when I start up the computer without having a lot of other applications and windows open as well.
Any suggestions? Thanks

Rysz - thanks that was the problem - I missed that Hide was checked.
Rick

Windows 7 worked fine and now won't boot/start anymore?

My little brother just bought a used 24" iMac (early 2008) at the beginning of this year.
He installed a Boot Camp and Windows 7 for gaming.
Everything worked fine and he played with iMac earlier today, but now he phoned me that Windows won't start anymore. He gets a black screen with blinking line after booting to Windows partition. He said that the black screen used to flash everytime windows started, but now he's stuck to that black screen. He tried to repair windows with the installation DVD, but there was only options to restore system from backup image file or drive, which (of course) my brother hadn't made.
Is there any way to fix this problem or does he have to install Windows again?

Get a book. Spend more time researching. Make sure not to install x-ware or anything that isn't needed and compatible. You should invest in backups, and use restore check points.
Try getting chkdsk to also look for bad sectors.
And uninstall whatever was last installed. And one plus for Windows, you can rollback a driver too.
Could happen if they ran too low on free disk space. Windows 7 SP1 is due out, and that will need 9GB of free space to install and update (you get some back but good idea to have the extra space).
Clean out all the temp files that can clog a drive, I use CCleaner daily and sometimes there is 500MB to dump.
A good backup/clone and Boot Camp support program:
http://www.paragon-software.com/home/hdm-personal/

HT1386 I have a ipod nano older version and I can't sync my music to the iTunes site to change or delete or add anything to it? What can I do? The iPod works fine and I use when I am at the gym.

I have an older version 1.1.3 iPod nano 4 gig and when I open iTunes I can't view my music list or change or delete any I have on the iPod.
This device works fine and I like to size to use when I excercise. What can I do?

I requested your post be moved to the iPod Nano forum. This is the iPod touch forum.

Email send to users and sharepoint group when list item changes status

I am very new to designer to write workflow. I hope you guys will help to figured it out. I have list which has one dropdown item called "App Change Request Status". Dropdown items are "Submitted,Assigned, Estimated".
When "Submitted" Selected Email needs to send below users.
Send to SharePoint Group "IT Senior Mangers"
When "Assigned" Selected Email needs to send below users
Send to Project Manger - (Person or Group) - it is column in the list
When "Estimated" Selected Email needs to send below users
Send to SharePoint Group "Data Gov Group" When "Type Of Change" is "New Project"
Send to item created by
Please provide me steps to do this in share point designer. I am using SharePoint 2013 foundation.
ItsMeSri SP 2013 Foundation

hi,
use the below link to create workflow in sharepoint designer 2013
http://msdn.microsoft.com/en-us/library/office/jj554671(v=office.15).aspx
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

I have had a third generation iPod touch for three years. It's worked fine sice recent,y when it started looseing battery very fast and every apo including the built in ones like mail and photos have been crashing after about five. I uses of use!!!!

I have a third generation iPod touch. It's worked just fine until recently. The battery goes out very very very fast. But the main issue is that all my apps (which is why I use the iPod, to play them) crash after using them for 5 minutes, this does include the built in apps like photos and calendar ect.. I have had this for about 3 years and love it very much it's not damaged at all. I Have taken very good are of it . Is it time for a new iPod or can I fix it please help!!!! Thanks!!

The battery can be replaced: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
As far as crashing apps, it may or may not be related to the battery life. I suggest the usual "restart, restore" routine: http://www.apple.com/support/ipodtouch/assistant/ipodtouch/

How do I stop camera raw adjusting contrast and brightness automatically when I open any image

Every time I open in image in camera raw or Photoshop it is applying an automatic contrast and brightness setting. I have tried resetting to defaults with cntrl shft del but it doesn't make a difference. It also when I just flick through thumbnails on bridge. The pics look almost like they have a cartoon like filter on them!!any ideas on how I get it all back to normal it's been great in the past . I use cs3

Short answer, learn how to use the tool...
As for the "auto" adjustments, are you sure that's what's happening or are the images changing based on the differences between what the camera preview and the Camera Raw preview look like? If you have indeed somehow turned on the "Auto" adjustment and saved that out as a Camera Raw default, you can go into the Camera Raw flyout menu and choose the option to Reset Camera Raw Defaults. If however you are talking about the inherent differences between the way your camera renders raw and the way Camera Raw renders it, that's an entirely different discussion...
As for your other question, try rephrasing it as it doesn't mean a thing to me so I have no idea how to answer...

Latency, pops, and clicks stop when re-starting Logic?

Hello,
Recently when playing my projects (audio and midi tracks together), and then playing my midi keyboard over the tracks, I’ve had some latency—pops, clicks, etc., like Logic can't keep up. When I close out Logic, and start it up again, and then play my Midi keyboard over the same project, there is NO MORE latency or pops, whatever--and the problems seem to go away. Has this ever happened to you guys? Does closing down Logic and then starting the app up again seem to cure a problem like this?
Thanks

Yep. Sad but a true fact of Logic life. The other thing to try is to unplug your interface causing core audio to reset. Another is to go into the audio settings (or is it prefs? always forgetting) and change a setting, hit "apply" change your setting back and hit "apply" again causing core audio to reset.

Had to restart pc. when closed, i told firefox to save and quit, but when re-started, lost all pages

I had several web pages open for downloading. I had to re-start my pc for another reason, so when I closed down, firefox gave me the option of "save & quit." But when the pc restarted, none of the web pages were opened.

Sorry, going to create a "new" account using the same username (email address) deleted your data from the Sync servers the same as if you had requested a new Password.
My advice is to ask a Mac-owner friend for help by the friend connecting that external drive to their Mac and accessing your Time Machine backups and then copying that data to a USB Flash stick. Either all your backup data, which you can pick thru; or have the friend look specifically for your Firefox bookmark related files.
'''places.sqlite''' = file where bookmarks are stored
'''bookmarks-''yyyy''-''mm''-''dd''-###.json''' = bookmarksbackup files
''[year-month-day-count number of bookmarks in the file]''

When I open Firefox, it opens all the tabs that were open when I closed it last time. How do I change this so it only opens my homepage. I have checked Tools/Options/General/Startup and it shows "When Firefox starts" ... "Show my home page". HELP!

This hasn't always happened. It just started a few days ago and I don't know what triggered it.

Did you see this article linked from the main Firefox Help page?
[[Removing Babylon, SearchQU or MyStart]]
Post back if you need more help.

I am running windows 7 and Outlook 2007, when I start Outlook an error box pops up that MobileMe services could not be started. HELP?

I am running windows 7 and Outlook 2007, after updating to the latest verision of iTunes (ver 11.1.4.62) I get a popup box that reports MobileMe services could nt be started. This happens twice, I click close and Outlook comes up. I did not have this issue before I updated iTunes.
Can anyone help?
Thanks,
Allen

MobileMe was discontinued at the end of June 2012. The control panel should be removed if still present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

Color Adjust Filter and Paint Bucket not available in CS3

I recently noticed that Colors in the Filter menu is not available in my install of Illustrator CS3. I also noticed that the Paint Bucket tool is missing. Both appear to be in the Plug-ins folder in their respective folders (Illustrator Filters and Tools) but are not available in the program. I am using Mac OS X version 10.4.11 on a PowerPC G4 running at 1.6 GHz with 1 GB of SDRAM. I have the Adobe Creative Suite 3 Web Premium package.
There may be other problems with my install, but these are the two things I notices. Can anyone shed some light on why this is happening and how to fix it? I tried a re-install, but to no avail.

Basically yes, but not quite. You may want to review the new features. The paint bucket was removed because it was, well, pointless in most cases. THe Live Paint tool is much more useful than the old Paint Bucket.

Adjusting FIN and CAP buckets when planned start changes

Similar Messages

Maybe you are looking for