Adjusting Voltage after 1.3 Bios update

Hello, my system specs:
P7N Diamond NVIDIA 780 SLI chipset
Intel Q6600 Quadcore CPU
850 watt PSU
4gb OCZ DDR2 PC2-8500
I just updated to the lastest BIOS version 1.3. However, ever since making that update, I have been unable to adjust any voltage in my BIOS. They are all locked in Auto and greyed out. Is there anything I can do to unlock my voltage settings so I manually configure them again?

Use -/+ NumPad keys or "PageUp/PageDown"

Similar Messages

Thinkpad E440 can't use wireless after 2.07 BIOS Update

Hi all, I need some help. I just bought a new thinkpad edge e440-Q01 last sturday. After I installed Win 7 ultimate 64 Bit, all the driver, everything work fine, i can connect to the internet, start working etc.
Then I update the BIOS, first it was 1.61 version then I upated my BIOS using BIOS utility for win 7 (downloaded from http://support.lenovo.com/en_US/downloads/default.page). After that i can't connect to the interter via wireless LAN. It was said that I need to turn on the "hardware radio switch", both intel wireless utility and thinkvantage connection utility says i need to switch the wireless on, but, i can't find the hardware switch for wireless on thinkpad edge e440.
I try to push F8 button, as there is a symbol of wireless LAN, but nothing happens.
Then when I open the device manager, there is lenovo connect 1.0 device and i can't find it's driver, so it remain as unknown device.
I try to reinstall the windows, but now i don't have bluetooth to.
Other driver such as GT740, Ethernet, chipset, usb, etc are working just fine.
Anyone can help?

just for addition, lenovo bios update utility have 2 option task. to update bios and model number. ican update the bios but not the model number.

[HUGE BUG] Z87-G43 After 1.50 bios update

Hi, i was used to the 1.30 bios and had no problem at all.
But Live Update 5 told me there is a new bios update: 1.50, i couldn't resist to *upgrade* :(
Now i can boot my computer 1 time every 10, the others seems like i have some huge problem with the UEFI.
I normally boot with UEFI SSD (Samsung 840 PRO 128gb) with GPT partition and all with Msi Fast Boot enabled, now i'm scared to turn msi fast boot on! If i can't reach windows to disable msi fast boot i can't reach the bios too.
When i turn on the computer it ends up in one of those possible scenarios:
- UEFI Shell listing some of the devices
- UEFI Shell listing all the devices
- A try to load from SSD without UEFI resulting in "MS-DOS like" error "Boot disk not present"
- Windows Boot loader loads and tell me he can't reach the Disk. Hitting reply *some* times (sometime 1, sometime 2, sometime 3) result in proper OS boot
- Windows Boots correctly
This is totally random, when i enter the bios *SOMETIMES* i can see the UEFI HD icon blue (so it can find it), and *SOMETIMES* its grayed.
Do i have a way to rever to 1.30 bios? Or is a fixed version of the 1.50 bios coming? Now i know that if i power off my pc i don't know when i can power on it again :\
If needed i can post a video of that (hoping to reach windows again)
2 more info:
1) i always have the windows watermark "SecureBoot is not configured correctly", but i had it from before the bios upgrade
2) the bios updater crashed after the *windows reset* input, so i had the "Restarting" screen in full screen and i saw for some second that crash alert

hi, i resetted cmos and leaved only the ram in slot 2.
Maybe it's just luck but now i can boot to windows a little more easily!
Here what happened after the cmos reset:
Boot #
Result
1
Bios alerted me about the CMOS reset, i pressed continue and i got the "ms-dos like" error "boot disc error or not present". Rebooted, and the bios says the first device is the UEFI HD, so i have no idea what's going on
2
Boot to windows
3
Efi Shell with full list of devices
4-10
Boot to Windows correctly
After this i did a manual shutdown and i had 2 boot to full list Efi shell.
Another shutdown and i goes to windows recovery utility.
Another shutdown and windows booted up correctly 2 times
and.. now.. i'm here

X1 carbon 20A7 won't boot after 1.13 BIOS update, ecreen also corrupted.

After updating the BIOS to 1.13 the X1 refuses to boot . After several attempts to diagnose the problem (trying to boot under legacy and uefi with various rescue pen drives) I doing a restore with the recovery media (created using the inbuilt software) but that didn't help, it just wiped my partitions and reinstalled windows (I'm assuming since I have no way to check at this point) but still refuses to boot. I can boot the windows rescue thumb drive under legacy though. After the update the screen was also corrupted, picture here http://i.imgur.com/ScfD1Uz.jpg.
At this point I'm not sure what to do anymore, it seems that the BIOS update failed in some way or somehow broke something.

this seems to have caused uneven lighting in the LED display, very strange problem. You may need to get warranty service on it.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

No POST, Blank Screen after messed up BIOS update

So I was downloading an update to the BIOS and during installation it was shut down (don't ask, I am still mad). So when I tried to reboot I am getting nothing. No POST or anything else on the screen. I have searched my place for a bootable CD or anything but I cannot find it. I am thinking the BIOS is corrupt as it was shut down during the installation of the BIOS update. I have searched to create a bootable disk but am not sure if that will do. I guess I am looking for a way to flash the BIOS but it's difficult when you can't even get into the setup screen.
I have a L305-S5919 running Vista.
Thanks for any responses,
-Paul

UPDATE: Did the old battery pull and it appears to be working.

Hp Bios Update loop after successful(?) bios update

So i tried to update bios through windows first, system hung and then my laptop wouldnt turn on with the battery on. I removed the battery, entered windows and tried again to update bios, but this time i got a fail message. I entered the bios update utility pressing win+B, flashed the latest bios using a usb stick, all seemed well until i tried to reboot. Caps lock blinks twice, bios updates fine from usb flash and same goes over again and again. "Hidden" bios on the hdd's efi partition seems damaged cause bios doesnt update from there, only through usb. Any ideas?

, Hello and thank for posting on the HP support forums. Generally unless you are having a huge issue with your hardware you do not want to play with your BIOS unless you have a tun of experience on dealing with a big OOPS! The good news is there are a few articles on the HP support sight here to help you out. HP Notebook PCs - Restoring the BIOS HP Notebook PCs - Updating the BIOS Consumer Notebooks and Windows 8 - Overview of BIOS updates Not every system is the same so before you try and update anything as important as a BIOS call before you dig or at least check out the documentation so that you do not end up with a massive crash that you can not recover from outside of replacing the motherboard. I hope the links help and if not here is the link so you can contact HP Support for repair options. Contact HP Support Please let me know how things go. Thanks again for posting and have a great day.

Yoga 13 in stolen mode after attempting a BIOS update

I recently bought a used Lenovo Yoga 13 from Lenovo's Outlet site.
I went through the first time setup and I'm trying to update the latest BIOS "66cn55ww_x64_en.exe." As soon as I run the .bat file, it comes up with an error "The system is in stolen mode, bios upgrade aborted"
Upon further research, it appears the previous owner or company registered the laptop with Computrace / Absolute lo jack. If there is no internet conectivity with the laptop after xx amount of days, I believe the laptop is put into this stolen mode? I tried to register the laptop with the Absolute software and it said the code was already redeemed and that previous owner has to login and remove the system from the account.
I'm assuming this is something that has to be returned back to Lenovo to fix? If that is the case, I'm just going to ask for a refund...

Dear Tebowmania
Welcome to Lenovo Forums
why you need to update the BIOS ,if its nessasry you can contact nearest service center in order to help you in this
thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After v1.90 BIOS update Satellite Pro A300-1EA wont boot up

I have just upgraded my laptop to the new BIOS as stated in the title but after doing it my computer now wont boot up at all. I just get a blue screen with it asking me to do a CHKDSK because there might be a virus or that the hard drive isn't connected properly (when it is), and it just keeps rebooting.
It wont start in safe mode either. Anyone else had the same problem and if so, how do I get my laptop back?? :(
Thanks for any replies.

Please don't be mad on me but I think you really didn't read users manuals you got with your notebook. There is exactly described how you can have factory settings again.
So, now you are 100% sure that recovery image is not on the HDD but you don't know how to have factory settings again. Strange.
Remove battery, connect AC adapter only and disconnect all attached external devices.
Start your notebook and enter BIOS settings. Set it to default settings and try to start OS again.
What happen exactly?

Cant adjust volume after safari 5.1 update!

just done the safari 5.1 update on my 2007 imac, all went well and it works great, ive noticed since doing this though that i cant adjust the volume of my imac! when i press the volume keys it just has a sign indicating the volume cant be adjusted!
the sound however is outputting, its just i cant change the volume.
anyone else had this issue?
many thanks,
Jamie

HI Jaime,
Open System Preferences/Sound. Click the Output tab.
Make sure the Mute button is not selected at the bottom of that pane.
Try Resetting the PRAM
If that didn't help, go to /Library/Preferences and move the com.apple.soundpref.plist file to the Trash.
Carolyn
Message was edited by: Carolyn Samit

Satellite P100-347: After 4.10 BIOS update fan always runs at maximum

Hi!
I have an P100-347 and had graphics stuttering problems while playing games. By updating BIOS 4.0 to 4.10 it solve the stuttering problem!!!
Now my fan always runs at maximum, It never ideals.
It's still the same even when i chooes lowconsumption configuration. I use the same drivers as before, just only updated the bios.
I have alsow tested with the latest intel chipset divers and Nvidia driver and it is still the same.
So my conclution is the BIOS, does Toshiba know anything about this issue and working on a newer bios?
Kind Regards Ismael

Everything points that the BIOS 4.10 is the common issue to the always high speed of the graphical fan even when the laptob is in standby mode.
I want to see some action like a new revise of the BIOS 4.10!
/ Ismael

After f.08 bios update all disks hide

OS dont boot. In boot manager nothing. sorry for bad language. Notebook HP 15 Notebook PC

Try:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02693833
then
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00042629
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

P35 platinum combo will not boot windows after bios update via Live Update

Hi,
I had everything running on windows 7 fine until 2 days ago. I installed Live Update from MSI website. I was about to install driver updates for my motherboard, but the bios update went instead. my pc tried to restart after the bios update installed, but it failed. would not post and would only see black screen.
then i removed one of my memory sticks. it would post, but then windows would not start up. it would get stuck at windows loading screen. i tried to reformat with my windows cd. but during install it would blue screen of death me. i tried multiple times and it would always blue screen of death with different errors. the last one i remember was a message saying i should off turn shadowing and caching.
this all started happening after i attempted bios update via Live Update.
Any help is greatly appreciated.
I have a core2quad 9450
this motherboard
MSI P35 Platinum Combo LGA 775 Intel P35 ATX Intel Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130141
this ram
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) Dual Channel Kit Desktop Memory Model F2-8000CL5D-4GBPQ
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231145
this harddrive
Mushkin Enhanced Chronos MKNSSDCR120GB 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820226236
this video card
XFX PVT88PYSF4 GeForce 8800 GT 512MB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280
Thanks!!!

at a guess you need to reset bios to ahci
a bios flash defaults to ide mode

Boot Fail after latest BIOS Update on Flex 2-15D

Hi everyone,
I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.
I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.
I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.
After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP" - just in case this helps someone).
Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".
That is basically it.I guess I have to find a way to re-install the previous version of the BIOS, but I have no idea how!
Any idea?!
Now about what I did to fix this (poor, but I tried):
If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows" and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: \EFI\Microsoft\Boot\BCD" "An Error occurred while attempting to read the boot configuration data."
I can't even boot into Linux on a USB stick, because the Windows "Error Recovery" (translated from German, sorry - my guess) won't let me when I try (just offers to boot to Win7 in protected mode - it could be that it fails immediately and jumps back to Win Startup).
Thank you for every bit of help!
Tristam
Solved!
Go to Solution.

I found our the solution to my problem with the help of SebastianLenovo ...
In the BIOS / Boot Mode, I switched back from "UEFI" to "Legacy". That's it. That simple. The BIOS Upgrade routine just did not transfer that setting from the old BIOS to the new.
Given the fact that 1. I did not change that setting, so it is default and 2. it would have been easy to avoid, if the BIOS update routine would be well programmed to transfer the current BIOS settings to the new, upgraded BIOS ...
Anyway a strange situation that a 64-bit system has a 32-bit BIOS. Actually no Linux distribution (except FatDog and rescue systems) are able to deal with it - Linux only running as a Virtual Machine under Windows. I think this is inappropriate and really taking away a part of the fun if you can not run this laptop as a dual boot system.
Thanks to Sebastian and I hope this solution helps someone in the future...
Regards, Tristam.

Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

Dear madam/sir
after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
product details
product no ; QB404PA#ACJ
product : hp pavilion g4 1121 tx
purchased : sept 2011
Thank You

Hi @satyakam
Welcome to the HP Support Forums!
I understand that you are enjoying your sound from everything today. I am happy to help.
If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
Then I would make your headphone the default device when it is plugged in.
To make headphone as the default device
1.    Click on Start; Go to Control Panel.
2.    Click on Sound.
3.    Switch to Recording.
4.    Select your microphone/headset as the default device.
5.    Save the changes by clicking on OK.
Also you can Uninstall and re-install your audio device drivers, to do that:
1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
2.    Expand Sound, Video and Game controllers.
3.    Right click on the audio component and then click uninstall.
With the driver uninstalled then download and re-install the driver from:
HP Pavilion g4-1121tx Notebook PC Drivers
Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
Let me know if that helped at all.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

K7N2G-L working too noisy after bios update

After I download bios update of main board from MSI live update AMD processor start to work too noisy how can I fix it pls help!!!!!

Flash back to the BIOS that worked for you and report your findings to MSI technical. >>How to contact MSI.<<
Use the forum flasher in the future. Its safer. >>Use the MSI HQ Forum USB flasher<<

Adjusting Voltage after 1.3 Bios update

Similar Messages

Maybe you are looking for