Admin console error for 8.1sp2
Hi, we are using weblogic server 8.1 sp2 and we are getting the following error on our admin console only after a few days of the server restart. Does anyone know why?
java.lang.NullPointerException
at weblogic.management.console.helpers.UrlHelper.buildIconList(UrlHelper.java:169)
at weblogic.management.console.helpers.UrlHelper.getIcon(UrlHelper.java:203)
at weblogic.management.console.tags.nav.SmartNavNodeTag.getIcon(SmartNavNodeTag.java:147)
at weblogic.management.console.tags.nav.SmartNavNodeTag.inferStuffFromContext(SmartNavNodeTag.java:132)
at weblogic.management.console.tags.nav.SmartNavNodeTag.doStartTag(SmartNavNodeTag.java:43)
at weblogic.management.console.webapp._domain.__nav._jspService(__nav.java:690)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:301)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:150)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
at weblogic.management.console.actions.internal.ActionServlet.doGet(ActionServlet.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
========================
p.s. error CR100006 was supposed to be fixed in SP2.
Strange Error... seems due to currpt installation.
Things to check:
- Start of instance: please check all processes are down before starting up AdminServer
- Start of instance: please check messages during startup (also Warnings...)
- Check listen address, listen IP of instance...are there other (managed) instances?
- Config files: check the <doman>/config.xml , compare it with backups if you got them
Similar Messages
-
Building an Admin Console Extension for a Custom Security Provider
I am looking for an example or a description how to build an Administration Console extension for a custom Authentication Provider.
Especially the creation page for the provider is interesting because I am not able to create and register the required Authentication Provider MBean.
The call “mbeanHome.getMBeanServer().createMBean(className,objectname)” always throws the following Exception “javax.management.ReflectionException: The MBean class could not be loaded by the default loader repository”
Even if I try the class “weblogic.security.providers.authentication.IPlanetAuthenticator”, that is part of the bea distribution, the same exception is thrown.
It seams that the Problem has something to do with class loaders?
When I use the standard admin console pages to create and configure my provider everything works fine.
The only example “kennedy0208.zip” I found in the net does not deal with the creation of the MBean.
It only customizes the edit pages for the provider and at that point the MBean has already been created by the standard admin pages.
Maybe the author discovered the same Problems and gave up!?
What makes me wondering is that I have to put my MBean Classes to my console extension war file to be able to import the packages in my jsp.
If I not put the classes to my war the compiler throws an exception because he can’t resolve the package.
Because I moved my provider implementation jar to the directory “WLHOME\server\lib\mbeantypes” as described in the bea documentation it should run without putting the classes to the war!?!
I am very surprised that the bea documentation does not provide any example about this topic.Found it. Cut and paste error. I still had one of their example class
names in my code. Oops. -
Admin Console errors in fresh install on Windows 2003 Enterprise.
I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
SeanYes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find! -
GW Mobility Service admin console - logins for non-Admins no longerworks
We recently upgraded from the GW Mobility Pack (Data Synchronizer)
v1.2.5 (299) to the new GW Mobility Service v2.0.1 (53).
Previously, a regular user could login to the Data Synchronizer admin
console and configure their own account settings to determine which
cabinet folders or address books would get synchronized to their mobile
device.
Since our upgrade to the GW Mobility Service, only administrators can
log in to the admin console. Any attempt by a non-admin user to login
to the admin console is met with an "Invalid username/password" error.
Is this by design, or is there something we've missed in our GMS
configuration?
Thanks,
Greg
former e-mail for posting:
[email protected]On 4/22/2014 11:49 AM, DZanre wrote:> "Greg N." wrote:
>
>> Any attempt by a non-admin user to login to the admin console is met
with an
>> "Invalid username/password" error.
>>
>> Is this by design, or is there something we've missed in our GMS
>> configuration?
>
> If you switched your authentication mode from LDAP to GW, then you
will need to
> login with the GW user/password. Have you tried that? It's quite
possible that
> this is an entirely different password (and in some cases a different
userid).
>
Danita,
Thanks for responding. Unfortunately, the authentication type wasn't
changed during the upgrade. It's still set to LDAP. Both Provisioning
and Authentication under User Source are on LDAP.
I did go ahead and try a GW login anyway, but no luck.
I also checked the base user and group DN's to make sure they are still
set to the correct eDirectory context, and they are.
Any other suggestions?
Thanks,
-Greg
former e-mail for posting:
[email protected] -
BizTalk admin console error Provider load failure
Hi,
I am facing issue with BizTalk admin console, getting below error,
i thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
TITLE: BizTalk Server Administration
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
ADDITIONAL INFORMATION:
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
Provider load failure (System.Management)
after looking at event viewer i can see few more error messages,
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process id: 0x215c
Faulting application start time: 0x01d004a6e0c31506
Faulting application path: C:\windows\SysWOW64\mmc.exe
Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
Report Id: 3d994be7-709f-11e4-80ee-00505689506c
Faulting package full name:
Faulting package-relative application ID:
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
at System.Windows.Forms.Control.WndProcException(System.Exception)
at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.NativeWindow.DestroyHandle()
at System.Windows.Forms.Control.DestroyHandle()
at System.Windows.Forms.Control.Dispose(Boolean)
at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
at System.ComponentModel.Component.Dispose()
at Microsoft.ManagementConsole.FormView.InternalShutdown()
at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
at System.Delegate.DynamicInvokeImpl(System.Object[])
at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
at Microsoft.ManagementConsole.Executive.Message.Execute()
at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run()
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
does any one face similar issue if yes can you please help me to solve this?
Regards,
Amit
Regards, Amit Morehere is log generated during configuration,
[2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:10:0588 Info BtsCfg] Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CWMI::Connect
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CWMI::Connect
[2014-11-24 05:16:10:0603 Info BtsCfg] Entering function: CWMI::CreateGroup
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:10:0791 Info BtsCfg] Unconfiguring feature: WMI
[2014-11-24 05:16:10:0791 Warning BtsCfg] BTS management server or DB names are not found in the registry.
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CWMI::StopHostInstance
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Entering function: CWMI::UnMapHost
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
[2014-11-24 05:16:10:0869 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:
Source of exception: System
Message: Cannot delete Performance Category because this category is not registered or is a system category.
Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
[2014-11-24 05:16:11:0166 Info BtsCfg] Stopping Tracing
[2014-11-24 05:16:11:0166 Info BtsCfg] Entering function: CWMI::DeleteServer
[2014-11-24 05:16:11:0182 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Entering function: CWMI::UnConfigureGroup
[2014-11-24 05:16:11:0197 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
[2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: no
Sub UI: yes Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: WMI Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: Engine,BTSCfg Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: RulesEngine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MOT Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: yes Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMPortal Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MsEDIAS2 Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
[2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
" Source="" HelpID="" />
Regards, Amit More -
Is there a way to disable concurrent Weblogic Admin Console sessions for the same user?
A coworker on another workstation and I are able to log into same user account on the Weblogic Admin Console at the same time. I would like to restrict access so only one session per user account can be logged in to the Admin Console. Is this possible?
Alternatively, is there a way to log identifiable information (IP/workstation) when multiple sessions for one account occur at the same time?
I am using 10.3.6.0Hi,
You could also check the http access logs for such info. There you could see records for the received requests, with each record starting with the source IP that initiated the request.
The default location for access logs is ${DOMAIN_HOME}/servers/${SERVER_NAME}/logs. Of course in your case, the ${SERVER_NAME} would be your admin server name (AdminServer if left as default).
Regards,
Mohab -
Weblogic Server 9.2 - Weblogic Admin Console Error
When I open the admin console from the browser on localhost, I get an error "You must have valid license to use WebLogic Portal Framework.
It was working fine until some point and started giving this error.
Any help in resolving this is very much appreciated.
ThanksHello User,
You can find the application under below path
Domain_name - Expand "Environment" and Select " Deployments " - here your application will show which are deployed in this domain.
Please refer -http://docs.oracle.com/cd/E13222_01/wls/docs100/intro/console.html
Regards
Laksh -
Org Chart 3.0 : Admin Console Error
Hi
Version: Org Chart 3.0
In AdminConfig->ORgChart->Hierarchies->Position, the pforile step (after Details Designer)
has an yellow triangle. When I move my mouser over, it says:
An errror has occured when initializing this step: java.lang.NullPointerException:while trying to
invole the method com.nakisa.framework.configuration.detailsPresentationConfiguration.toXML() of an
object loaded from a local variable.
Therefore, I can never go into the Profile step.
Has anyone seen this error before?
Thanks.Can you list your build version (from front page of Admin Console) plus which OS you are on and which version of NW CE you installed (7.1 or 7..2)?
I have never seen the error. I am sat in front of 3.0 OrgChart Admin console right now and don't get the error.
Stephen -
Archive Management : Admin console error
Hi
I am getting this error when I click on Archive Management in admin console. Please help me
ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: ApplicationManager not found.
Thanks
UllasYour installation of LiveCycle is not successful. It looks like LiveCycle has no access to the Global Document Storage folder that has been defined in the LCM (LiveCycle Configuration Manager).
Here are instructions on how to verify that a LiveCycle installation actually works:
http://blogs.adobe.com/livecycle/2008/09/validating_a_livecycle_install.html -
Admin Console Integration for Users in a Custom Realm
We are implementing a custom realm and are having troubles getting our Users to
show up in the User list.
Our user class extends weblogic.security.acl.User, and is forced to use the default
CTOR because our data access layer requires it.
Unfortunately, getName() returns null if the User(String) constructor is not used.
Furthermore, Identity::setName() is final, so it seems as though there is no
way to set the user's name after construction.
I am correct in this?
If so, any thoughts on whether it is worth going down the path of making my user
class implement Principal instead of extending weblogic.security.acl.User? I
would be forced to try to guess at what methods in User are required to integrate
with the admin console, I believe. I have not been able to find any documentation
that specifies what api/contract the console uses when it attempts to display
user, role, acl information for a custom realm.
Any advice would be greatly appreciated.
-chrisMy comments mixed with your text
"Chris Goodacre" <[email protected]> wrote:
>
We are implementing a custom realm and are having troubles getting our
Users to
show up in the User list.
Our user class extends weblogic.security.acl.User, and is forced to use
the default
CTOR because our data access layer requires it.
Unfortunately, getName() returns null if the User(String) constructor
is not used.Yes.
Furthermore, Identity::setName() is final, so it seems as though there
is no
way to set the user's name after construction.
I am correct in this?Yes. Changing a user's name on a constructed user object is like mutating that
user to another user - a security hole. It isn't allowed.
>
If so, any thoughts on whether it is worth going down the path of making
my user
class implement Principal instead of extending weblogic.security.acl.User?I'd try to stay with extending weblogic.security.acl.User, but also implement
weblogic.security.acl.CredentialChanger, so you can change passwords through the
console (otherwise you get NullPointerExceptions).
You really want to get around not being able to supply a user name as part of
the ctor.
I
would be forced to try to guess at what methods in User are required
to integrate
with the admin console, I believe. I have not been able to find any
documentation
that specifies what api/contract the console uses when it attempts to
display
user, role, acl information for a custom realm.
Any advice would be greatly appreciated.
-chris1. Your realm should extend AbstractManageableRealm and implement DebuggableRealm
if you want to integrate with the console.
2. The only contract is to implement all the methods!
3. Check the type of the user and group objects being passed to your realm - if
they're not your user and group type, reject the call.
4. The documentation is indeed terrible, and often wrong. The examples shipped
are incomplete (the RBDMS realm shipped has approx 1/3 of the functionality).
You'll get good with jad.
Should all be better in 7.0 with JAAS. The realm interfaces is a dog.
Good luck,
simon. -
More Lion issues - Throwing Console errors for non-existent application
Again, with the bad side of Lion.
I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to: /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.... and the others DON'T EVEN EXIST!!
How do I keep this from happening? Why does the OS go after this when it's been removed?????
8/20/11SaturdayAugust 5:30:14.113 PM mdworker32 kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/20/11SaturdayAugust 5:31:11.000 PM kernel nstat_lookup_entry failed: 2
8/20/11SaturdayAugust 5:31:44.239 PM com.apple.SecurityServer Session 100071 created
8/20/11SaturdayAugust 5:31:44.254 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM com.apple.security.XPCKeychainSandboxCheck Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:32:01.234 PM Preview snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
8/20/11SaturdayAugust 5:32:01.318 PM Preview writing of document took: 0.083616 secs, success = YES
8/20/11SaturdayAugust 5:32:42.333 PM rpcsvchost sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/20/11SaturdayAugust 5:32:42.483 PM sandboxd ([66316]) smbd(66316) deny job-creation
8/20/11SaturdayAugust 5:32:42.583 PM rpcsvchost sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
8/20/11SaturdayAugust 5:32:42.609 PM smbd anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:32:53.587 PM sandboxd ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
8/20/11SaturdayAugust 5:34:53.329 PM smbd anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:39:32.429 PM mdworker32 kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
I am using sunone application server7 on windows 2000.Whenever i try to start admin consolve i am getting an error as given below
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NoSuchMethodError: javax.servlet.jsp.PageContext.handlePageException(Ljava/lang/Throwable;)V]
Can anybody tell me what is this problem
thanks in advance.Strange Error... seems due to currpt installation.
Things to check:
- Start of instance: please check all processes are down before starting up AdminServer
- Start of instance: please check messages during startup (also Warnings...)
- Check listen address, listen IP of instance...are there other (managed) instances?
- Config files: check the <doman>/config.xml , compare it with backups if you got them -
Console Error for MS Word: invalid context 0x13cb4e80
"10/02/2014 21:46:47.074 Microsoft Word[411]: CGBitmapContextGetData: invalid context 0x13cb4e80. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update."
What can I do? My iMac is a 24 inch one from early 2008. The error message is from Console.This error is after the latest MS Security update.
Follow the thread BI Publisher desktop does not work on Office 2007 SP3 esp the last answer.
Just rename the file MSComctlLib.exd in 'C:\Documents and Settings\<YOUR USER NAME>\Application Data\Microsoft\forms' to MSComctlLib.exd.bak.
The file MSComctlLib.exd will be recreated when you start working in BIP add in from word. I have successfully done that and it works fine. -
Hi all,
I'm having some problems after logging into the admin console. For some reason unknown to me the side nav bar loads but the main frame doesn't load and just times out.
This is the error i get after waiting for a few mins.
exception
javax.servlet.ServletException: java.lang.RuntimeException: java.lang.IllegalArgumentException: Connection timed out
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:286)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
root cause
com.sun.enterprise.tools.guiframework.exception.FrameworkError: java.lang.RuntimeException: java.lang.IllegalArgumentException: Connection timed out
com.sun.enterprise.tools.guiframework.view.descriptors.ViewDescriptor.registerChildren(ViewDescriptor.java:198)
com.sun.enterprise.tools.guiframework.view.DescriptorViewHelper.registerViewDescriptorChildren(DescriptorViewHelper.java:66)
com.sun.enterprise.tools.guiframework.view.DescriptorViewBeanBase.registerViewDescriptorChildren(DescriptorViewBeanBase.java:112)
com.sun.enterprise.tools.guiframework.view.DescriptorViewBeanBase.(DescriptorViewBeanBase.java:59)
com.sun.enterprise.tools.guiframework.view.CCNodeEventHandlerViewBeanBase.(CCNodeEventHandlerViewBeanBase.java:26)
com.sun.enterprise.tools.guiframework.view.descriptors.CCNodeEventHandlerViewBeanBaseDescriptor.getInstance(CCNodeEventHandlerViewBeanBaseDescriptor.java:37)
com.sun.enterprise.tools.guiframework.view.DescriptorViewManager.getView(DescriptorViewManager.java:190)
com.sun.enterprise.tools.guiframework.view.DescriptorViewManager.getView(DescriptorViewManager.java:150)
com.sun.enterprise.tools.guiframework.view.DescriptorViewManager.getViewBean(DescriptorViewManager.java:58)
com.sun.enterprise.tools.guiframework.view.BaseServlet.handleException(BaseServlet.java:268)
com.sun.enterprise.tools.guiframework.view.BaseServlet.processRequest(BaseServlet.java:191)
com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:465)
com.sun.enterprise.tools.admingui.AdminGUIServlet.doGet(AdminGUIServlet.java:58)
javax.servlet.http.HttpServlet.service(HttpServlet.java:748)
javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
I'm using J2sdk1.4.2 and Sun App Server 8 and it is installed on a Solaris box.
Anyone have any ideas/suggestions on how to fix this?
ThanksIn my opinion, API testing for ESSO is not possible. Which are the modules in ESSO that you are using? Following are the ideas I can think of:
ESSO Logon Manager: I know WinRunner is one of the ways to test complete functionality of ESSO-LM. I have never used Load-Runner on ESSO, but you might want to check if you can generate load using that.
ESSO Password Reset: This can only be tested manually, since ESSO-PR is invoked before logging onto Windows machine.
ESSO Authentication Manager: If you are using a combination of tokens and smart cards, then you have to test this manually. If you are using passwords, then you might be able to automate the actions using WinRunner/LoadRunner.
ESSO Provisioning Gateway: Since this process is invoked by OIM, you will be able to generate load on this ESSO module by using OIM Provisioning API to provision large number of users.
ESSO Kiosk Manager: I don't know too much about this module, but if this involves Windows login-logout, then you may not be able to automate this. Else, you can use WinRunner/LoadRunner.
My advise is that you ask the developers to give you a complete demo for the usage of ESSO and then you can judge accordingly on which tools can be used for testing the same.
-shetty2k -
Users cannot connect BPC Excel, Admin Console except bpc_sysadmin
Hi experts!
We use MultiServer BPC 7.5 MS sp06 Installation
Servers
1. bpcweb - WEB (IIS) on Windows 2008 R2 x 64 (in AD)
2. bpcapp - BPC App Server on Windows 2008 R2 x 64 (in AD)
3. bpcdb - DB/OLAP MS SQL Server 2008 R2 on Windows 2008 R2 x 64 (in AD)
Installation on AD users and OK, Diagnostic on Server Manager - OK
We use AD authentification and Local too.
I have added 2 users to Admin TEAM with full rights on AppShell and on our AppSet: one user from AD another from Local AppServer
Users can connect into BPC Web, can select AppSets and Applications.
But when I try connect to BPC Excel or Admin Console - after I enter user login, password and domain - appear message
"Couldn't authetificate user id or password. Back and check, that entered valid credentials" (translation from Russian).
And when I try connect by bpc_sysadmin everything OK.
Thank you for help
Best regards
IaroslavHi!
All versions of OS, SQL, IIS, BPC and other are the same versions on all Environments, same AD.
Our Environmets:
DEV - Single Server - all connections - OK
TEST - MultiServer (1: BPC App/WEb; 2: DB/OLAP) - all connections - OK
PROD - MultiServer (1: BPC App;2: Web; 2: DB/OLAP) - connect to Excel and Admin Console - Error
Best regards
Iaroslav
Maybe you are looking for
-
No data in Report parameter inspite of Scheduling of List of Values
Hi, In the Business View Manager, I have created a Business View and LOV(List of Values) based on that view. The LOV consists of a cascaded prompt group that is used in certain Crystal Reports as under: > Loan Name >> Loan Subtype >>> Channel Name A
-
Nested Tables in Pages for iPad
I am using Pages on my iPad2. When opening a document with nested tables, it loses oll formatting for the nested tables. Is there a way to avoid this?
-
ClassNotFoundException (error in lookup : stub not found by client) ??
SampleServer.java_ import java.rmi.*; public interface SampleServer extends Remote public int sum(int a,int b) throws RemoteException; SampleServerImpl.java_ import java.rmi.*; import java.rmi.server.*; import java.rmi.registry.*; public class Sample
-
Option for selecting the GL indicator as optional
Hi Am using '0FIAR_C03' here the there is the field Special GL. I need to keep an option while executing the report/query for selecting either with or with out the special GL, if special GL is selected i need to fetch the records where special GL
-
Has anyone got the IIS Policy Agent 3.0 working with an ASP web application
Hi, Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.? I have installed the 32bit version of the agent as my web site must support