ADO multiple-step error

Based on my earlier post but with less information, how do I best work out the cause of this error when performing an ordinary ADO Recordset.Update operation?
error '80040e21'
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
The ODBC trace logfile (below) seems to show an error in the SQLBulkOperations call. What does this mean and how can I work it out any further?
Thanks,
Richard
Processid:{EF91 150-974 ENTER SQLBulkOperations
SQLHSTMT 01151C78
SQLSMALLINT 4
Processid:{EF91 150-974 EXIT SQLBulkOperations with return code -1 (SQL_ERROR)
SQLHSTMT 01151C78
SQLSMALLINT 4
Processid:{EF91 150-974 ENTER SQLGetDiagRecW
SQLSMALLINT 3
SQLHANDLE 01151C78
SQLSMALLINT 1
SQLWCHAR * 0x0527DBE8 (NYI)
SQLINTEGER * 0x0527DC0C
SQLWCHAR * 0x0527D7E8 (NYI)
SQLSMALLINT 512
SQLSMALLINT * 0x0527DC10
Processid:{EF91 150-974 EXIT SQLGetDiagRecW with return code 100 (SQL_NO_DATA_FOUND)
SQLSMALLINT 3
SQLHANDLE 01151C78
SQLSMALLINT 1
SQLWCHAR * 0x0527DBE8 (NYI)
SQLINTEGER * 0x0527DC0C
SQLWCHAR * 0x0527D7E8 (NYI)
SQLSMALLINT 512
SQLSMALLINT * 0x0527DC10

error '80040e21'
Multiple-step OLE DB operation generated errors. Check >each OLE DB status value, if available. No work was doneUnfortunatly this error is too easy to repeat with several databases. I have produced this error in adoanywhere using serverside cursor locations. Switching to Client-Side cursor location often stops the error.
It generally happens when I attempt to open 2 or more connections and attempt to modify the same row in each.
HTH,
Mike
www.adoanywhere.com

Similar Messages

Multiple Step Error Caused by SQL Syntax?

Hi All:
I am getting a multiple step error when I do this:
rs.Fields("MyField").Value = MyValue
I finally tracked down the error to being caused by this syntax:
SELECT a.* FROM MyTable a
or
SELECT a.MyField FROM MyTable a
However, this syntax works just fine:
SELECT * FROM MyTable
or
SELECT MyField FROM MyTable
So what's the big deal here?
Note: Both statements work fine in SQL Server; Oracle chokes on the aliased one.
Doug.

Hi Doug,
I am having very similar problem while runnig the following statments:
SELECT DESCRIPTION FROM ITEM, LOCATION WHERE ITEM.LOCATIONID = LOCATION.LOCATIONID "Updatable"
SELECT DESCRIPTION FROM ITEM JOIN LOCATION ON ITEM.LOCATIONID = LOCATION.LOCATIONID " Not updatable"!
if you figure out something pls let me know!
Abdullah Obeid.
Hi All:
I am getting a multiple step error when I do this:
rs.Fields("MyField").Value = MyValue
I finally tracked down the error to being caused by this syntax:
SELECT a.* FROM MyTable a
or
SELECT a.MyField FROM MyTable a
However, this syntax works just fine:
SELECT * FROM MyTable
or
SELECT MyField FROM MyTable
So what's the big deal here?
Note: Both statements work fine in SQL Server; Oracle chokes on the aliased one.
Doug.

Trace Stack Error - Multiple step operation generated errors

When importing a mapping table into Financial Data Management, I received an error code 2147217887 multiple-step operation generated errors. Check each status value. I was exporting a mapping table from our development application into our production application, so I am not sure what caused this error message. Any ideas would be greatly appreciated. Thank you.

I solved this problem.
Oracle Provider for OLE DB 9.x is supporting Unicode.
But I didn't handle Unicode (DBTYPE_WSTR).
I added Unicode handling code in my source, then there was no error.

Multiple-step operation generated errors.

Server : Oracle 9i release 2
OLE DB : OLE DB Provider 9.0.1.0, 9.2.0.4
In VC++,
When call IRowset::GetData(), It makes an error.
"Multiple-step operation generated errors. Check each status value."
what does it mean? and how can I fix this error?
Thank you.

I solved this problem.
Oracle Provider for OLE DB 9.x is supporting Unicode.
But I didn't handle Unicode (DBTYPE_WSTR).
I added Unicode handling code in my source, then there was no error.

Multiple-feed error

unable to resolve Multiple-feed error, printer picks-up large stacks of paper & jams. Difficulty opening rear cover (sticks), however, once open the bunch-up paper requires pliers to remove. In an earlier warranty calls to tech. support in India, I was instructed to return the printer for replacement. But I was diagnosed with cancer, in 2009 unable to follow through & comply due to medical complications, was discharged from Memphis Hospital in 2014 . What are my present options? Is there a manual paper feed option, bypassing paper tray? Thank You!

Hi , I understand that you are having issues with the printer pulling in multiple pages at the same time. I will certainly do my best to help you. I am very happy to see that you are doing better. Best of luck with your recovery. Unfortunately this model doesn't have a priority tray for single sheets. Please try these solutions:
1. Remove the stack of paper from the tray and flex it, rotate it 180 degrees, and flip it over. Do not fan the paper. Return the stack of paper to the tray.
2. Use only paper that meets HP specifications for this product.
3. Use paper that is not wrinkled, folded, or damaged. If necessary, use paper from a different package.
4. Make sure the tray is not overfilled. If it is, remove the entire stack of paper from the tray, straighten
the stack, and then return some of the paper to the tray.
5. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides
so they are touching the paper stack without bending. I checked out the Laserjet Color Pro CM1415fnw printer in our lab. Try these steps to see if it may help.Turn off the printer and disconnect the power cable. Remove the paper tray and flip up the jam access door. Look inside where the paper tray was, at the back area, in the middle. You will see two little white rollers. Make sure they are moving freely and I would clean them with a damp cloth and then dry them off again. Open the back access door and check for any rollers also need to be cleaned. Try running a cleaning page through the printer.From the Home screen, touch the Setup icon.
Touch Service.
Touch Cleaning Page. What type of paper are you using? You may Contact HP Support to inquire about the trade in options or service. Fill in the model number and the form to receive a case number for quicker assistance. If you appreciate my efforts, please click the 'Thumbs up' button below. Please let me know the outcome. Thank You.

How do i select multiple steps and move them?

Hi everyone! I'm trying to select multiple steps and move them all into a branch of a condition outcome. Here's the thing, I have almost completed my workflow with several steps for dynamic approval, however, i need to put a condition at the very start of the workflow and it does not seem that there is an easy way to move all of the steps into one branch. I find the workflow explorer really clumsy in this respect. Is it easier to just drag one outcome of the condition, say to the very end of the workflow? It does not seem to work for me though...hmmm...
Thanks and generous points will be awarded!

Funtion Module 'SWD_GET_WORKFLOW_DEFINITION ' gives the structure of the Workflow definition. The informations are stored in following table.
1. SWDSTEXT -> Table which gives WF Steps and descriptions
2. SWDSBINDEF --> Binding information is stored in this table
3. SWDSMNODES -> All nodes information is stored in this table
4. SWDSMLINES -> Workflow lines are stored in this table.
SWDSMLINES and SWDSMNODES are important tables for current requirement. By changing SWDSMLINES the bulk copy and paste can be incorporated. But this is very very risky, better to have a backup of workflow definition before doiing anything.
Any enthuiasts to write code for a unitlity to move multiple steps ?

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Single Spool for multiple steps

Hi,
I have a requirement, where in for multiple steps in a job i need single spool.
Single spool is created for multiple steps when i am running the back ground job with my user id. The problem is when running the same job with the batch user id, more than one spool is created. I have checked the settings of the batch id and even marked it as dialog user still more than one spool is getting created.
Pls let me know why this problem is happening.
Thanks,
Raju

Check the user profile (SU01) of your batch user, "output immediately" should be deactivated. Also check the print parameters in the job steps, "new spool request" should be deactivated.
I haven't tried this in a while, but the answer should be somewhere around these settings.
Thomas

Schedule a Job with multiple steps via ABAP Program

Hi Friends,
I want to create a report(Ex: ZREP) that will run another program(Ex: ZPGM) in background. What I need to do is, when I execute the report ZREP it should run the ZPGM automatically in background. This background execution should happen through JOB with multiple steps.
Why i am mentioned steps is, i have 1000 records in ZTABLE and need to execute 100 records each in one step and need to proecess in ZPGM with selection parameters. So in my case my job should create with 10 steps and need to execute in sequential manner.
FYI, In the ZREP selection screen i need to enter the records count/ interval to derive the job steps.
Please guide how to go ahead? Thanks in advance for all the help.
Regards,
Raghu.

Hi Raghu,
You can try the following pieces of code:
Loop at gt_table. "This table contains 100 records previously appended
w_jobname = c_job_emision "Job Name.
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = w_jobname
 IMPORTING
 jobcount = w_jobacount
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
* Perform or create T_SELTAB with parameters options
PERFORM Create_seltab_table.
*Call second program.
SUBMIT ZREP WITH SELECTION-TABLE t_seltab AND RETURN.
*Close Job.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = w_jobacount
 jobname = w_jobname
 strtimmed = c_x "Immediate Start
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDLOOP.
Hope this helps.
Regards
Ernesto
PS: Raymond Giuseppi was faster.
Edited by: Ernesto Caballero on Mar 10, 2010 1:57 PM

#MULTIPLE VALUE error in WEB I 4.1 SP2

HI ALL
I am getting #MULTIPLE VALUE error in few of the records in a column (assume A). Column A is formula in BEx. I am displaying data in web I based on Material division(1st column) and material group(2nd column). I tried with all : in, forall, foreach in WEB I , which doesn't sort out my issue. Can any body helpme out here. Again, I am using BEx Query, and column A is formula in BW BEx.
Awaiting for helpful answers.
Regards
swetha.

Hi Swetha,
use Sum([Column A])

Sync: Multiple Instance Error Causes Desktop Manager to Fail

I can no longer sync my Outloook calendar with my Bold 9650 using Desktop Manager 6 (bundle 3084). I failed multiple times, rebooted each device and tried again but still receive the same error. Error is a message from Windows that Desktop Manager has stopped working. The last few entries in the log indicate:
08:55:35.962 Sync information for application 'Calendar' in translator 'Outlook' --
08:55:35.962 Number of newly added records since last sync (New): 482
08:55:35.962 Number of records modified since last sync (Modified): 0
08:55:35.962 Number of records deleted since last sync (Deleted): 0
08:55:35.965 Performing two-way sync
08:55:35.966 ERROR: Multiple instance error. Remove a recurring instance or exception on (11/8/2011).
08:55:35.966 ERROR: Multiple instance error. Remove a recurring instance or exception "Bi-weekly Leadership Team Call".
I saw an entry in the Outlook calendar related to the error, but not in the BB calendar, and deleted it but this did not resolve the problem. At this point, I cannot get DM to complete synchronization. Has anyone else experienced this and identified a resolution?
thanks,
eric

Hi Eric,
Did you manage to resolve this? I have the same error and cannot get DM to complete the sync.
Thanks,
Johann

RECEIVING MULTIPLE DOWNLOAD ERROR ON ITUNES

receiving multiple downlad errors on itune songs........how do i delet them so I can re-download them?

I found the answer to my question in another part of this discussion forum. I'm adding it here in case someone else sees my original post and wants to see the solution.
To get rid of the download error, go to the download page and find the small down-pointing arrow icon next to the "download error. Tap to retry." text. Put your finger on the down-pointing arrow icon and flick (quick short swipe) to the left. The down-pointing arrow icon will be replaced with a "delete" button. Tap the delete button. Then confirm the delete in the modal popup window.
That's it. An easy solution, even though it took me many hours to find the answer.

ICal Import Failed Multiple validation errors occurred.

I am trying to move my old iCal calendars that used to sync fine to the new ones to sync to mobile me
I exported each calendar but when I try to import each I get
iCal Import Failed Multiple validation errors occurred.
It occurs whether or not I choose to keep or remove unsafe alarms.
I have deleted iCal caches etc.

i'm having this problem as well. (in addition to duplicate calendars of the ones i was able to manually import.) any help would be greatly appreciated.
/rant on
this isn't really the way i had hoped to spend my saturday night, i'm really disappointed that ical didn't sync intuitively to mobileme--isn't that why i pay for a subscription?
/rant off.

"Multiple Validation errors" message when creating new project in FCPX

As a test I have now managed to change the file format from older quicktime file to .m4v and import into FCPX. I had to use Handbrake to change the file format to .m4v. If a free software can do this then why can't the $300 FCPX - and allow me to import directly? This would save me MANY hours of extra work!
But then, when I try and edit this - first trying to create a new project I get the message "Multiple validation errors occurred" The same message even if I try and custon settings rather than use the default
Does this mean that after all the work and hours it took me to tarnscode the file format, import and then render etc - I will be unable to use FCPX - to edit this footage?

Update on trying to create a new project - and getting "Multiple Validation errors" message
I quit FCPX and tried to use iMovie to make a clip to send to you. Decided against this - and so I opened FCPX again
To my surprise there were now over ten projects - as every attempy had appeared! This is bizarre - why did they not show up when I tried to create them first?
So, I had to delet most and just use one. This appears to be working as a project and is allowing me to edit clips into it.
It will be a reall bummer though if I have to do this every time I need to create a new project!

Multiple JavaScript errors when opening aspx file in Dreamweaver

I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

Hi Steven,
Not sure if this is related, but can you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

ADO multiple-step error

Similar Messages

Maybe you are looking for