Adobe 3D, Ver8 and SharePoint 2010

We recently updated from SharePoint 2007 to SharePoint 2010. We use the Adobe Shared Review (Link to Docu) process to send out documents for markup/comment/review. After the conversion, the documents are still going to the correct review folder as before for all writers but two.
These writers recently had updates made to their PCs and so we went back into SharePoint and recreated new workspaces for them. Next, they started an Adobe Shared Review and recreated a new folder location, typed in the SharePoint Site URL, clicked Get Workspaces, and the workspaces appear in the list.
Each workspace listed has the following document libraries listed: Master Page Gallery and Shared Documents. If these writers choose the Shared Documents library and click Verify, the shared folder location is not valid. If they choose Master Page Gallery and verify, the shared folder location is valid and they are able to add the new folder and complete the Shared Adobe Review process. However, this is not the folder to store and collect document comments/markups because the originator cannot see that any new comments/markups were added by a reviewer.
I am one who is able to send out a review and have the PDF and comment collection folder added to the correct location. However, I did try to add a new folder and I also had a status of shared folder location is not valid when choosing Shared Documents from the library listing.
Is there something different from SharePoint 2007 to 2010 that occurred during conversion? Can it be that the correct shared folder location needs synchronizing somehow and if so, how? Any insight is greatly appreciated.

This is a known problem in Acrobat 8/9. You need to upgrade to Acrobat X where this is fixed.

Similar Messages

How to enable online editing of Adobe Illustrator document on SharePoint 2010 ?

Folks,
I have installed SharePoint 2010 and have enabled CMIS (on SharePoint). Does Adobe products have CMIS enabled as well ? Basically I want to enable online editing of Adobe files (Illustrator) on SharePoint 2010.
Any help or pointers is appreciated.
Thanks
Kulo

On SharePoint 2010, there is a Digital Asset Library where I uploaded images. If I upload a MS-Paint aware images such as jpeg, I can click edit on it directly. I can also save it directly into SharePoint.
How do I do the same for *.ai files ?
I am actually trying to figure out how to integrate the various Adobe products (including Illustrator) with SharePoint 2010 to enable our users to view and edit Adobe files.

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

SCOM and SharePoint 2010 Add-In for Dashboards (Issue)

I have an environment with SCOM 2007 R2, all working fine. I have installed ans new test server to integrate SCOM and SahrePoint 2010. On this server I have installed Visio 2010 (Yes, I know, never install Visio in a server, but this ins juts for test).
I have installed Visio Add-In and SharePoint 2010 Add-In.
All my dashboards created in Visio to reflect health state are working fine on Visio, in fullscreen. But, When I import this Visio file, (in . VWD), to SharePoint, I can see normally the Visio in my Webpart, all showing fine (I have used the step by step
to configure SCOM and SharePoint integration). But, after my first Refresh for the diagram all Health State Icons becomes a FAIL Icon (like image below). This sounds like some permission problem, because on Visio all Health State Icons works fine.
Someone can help me?

I have used this step by step before, but I think the problem is a parte, because I dont understand better, the part is:
To configure Visio Services for Read-Only Operator permissions on the RMS
In order for Visio Services to refresh the diagrams that are published and connected to Operations Manager data, the Visio Services service application must be configured with credentials that have access to the RMS. This is because
the Visio Services service application is executing the data provider which is responsible for returning the updated dataset from the RMS.
The easiest way to configure this is to make the account that Visio Services is running as a Read-Only Operator on the RMS.
To do this…
Create domain account
Run the Operations Manager console.
From the Administration tab click on User Roles.
In the User Roles list double-click on the Read-Only Operators role.
Add the account that is configured for Service Application Pool.
Can anyone help me about where configure this account on SharePoint??

Adobe Drive 3.0 and Sharepoint 2010

Have the Adobe Drive/Sharepoint 2010 interoperability issues been resolved?

Are you still interested in Creative Suite <-> Adobe Drive <-> MS SharePoint integration? Do you have SharePoint configured with CMIS? I’m not sure which specific issues you’re referring to, but there are a number of known integration issues (for example, check out functionality not working) that are being looked into by MS (confirmed that the check out issue and a number of others are ones they need to resolve). I do not have an ETA yet as to when an update with fixes will be released.

Adobe X Bates Stamping and SharePoint 2010

I'm trying to use Adobe X with SharePoint 2010 and Bates Stamp a set of documents stored in a SharePoint library and running into the following issues:
1. It's necessary to manually check out the documents in order to "stamp" them. Is this a known issue -- is there a way to have Adobe automatically check out the documents? I suspect not but thought I'd ask (would be a nice feature to add)
2. Once checked out, Adobe can process the documents. However, even though I tell it to "overwrite" the existing documents and to change the file name to the Bates Stamp sequence, Adobe creates new documents in the same library. The result is that I end up with twice as many documents in the library. Is there a fix for this so that Adobe actually overwrites the existing documents instead of creating copies?
Thanks

Hi, Renew.
Since this question is not related to the CreatePDF service, but rather related to Acrobat, I've moved your question to the Acrobat forum > Creating, Editing and Exporting PDFs.
Dave, Adobe

Acrobat Pro 9 e-sign and SharePoint 2010 integration

Hello,
I cannot get an Acrobat Pro 9 created document with electronic signature fields to open in SharePoint 2010 so it can be checked out, signed, saved and checked back in. I have seen discussions on this subject from 2011, but have not come across any solutions. Has there been a fix to this yet?

There are several different scenarios that happen. I am testing the document before I send it out the links again to have users esign. Not every user has Pro 9. Some only have Reader 8. I am uploading the unsigned document created in Pro 9 to a SharePoint 2010 site. There are 10 different signature fields – none of them are locked. When I go to the document to sign under the “edit” function in SharePoint I get an error that says object label badly formatted when trying to save, or I am able to sign once and save, and when I got to test signature number 2 it cannot open the document. Every time I upload it to SharePoint I have to enable Reader 8 usage rights. Sometime it lets me do it, and sometimes it says “this document could not be reader enabled.” It does not seem to be stable. Sometimes it works and then just a few minutes later it has problems. Please advise. Thanks.

Custom Property in Microsoft Word 2010 Document Template and Sharepoint 2010 Content Type not Syncing up

I wrote a macro in a Word 2010 template with a custom property called HeaderFooter (a Yes/No value). When the property is changed to No, the header and footer are hidden, otherwise, the header and footer are displayed.
I added the template to a SharePoint 2010 Document library, with a content type DocInformation and a column name HeaderFooterOffOn that I want to map to the custom property HeaderFooter in the Word Document.
The macro isn't working in SharePoint, though, because when the user clicks on the HeaderFooterOffOn in the DIP of the Word Document, the Word Custom Property (HeaderFooter) isn't changing with it.
How do I get these two synced up, so that when the SharePoint column is changed, the Word Document's custom property simultaneously updates with it?

Hi kevinkevinc,
There is no direct way to run macro in SharePoint
As a workaround, I suggest you use SharePoint Event Receiver to run some custom code when column changed.
Here is a similiar thread for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/249249e2-3263-4001-86fa-bda342d95f35/run-word-macro-on-newly-uploaded-sharepoint-word-documents?forum=sharepointdevelopmentlegacy
More information:
SharePoint Event Receiver：
http://msdn.microsoft.com/en-us/library/ee231563.aspx
http://msdn.microsoft.com/en-us/library/ff398052.aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Adobe Presenter 7 and PowerPoint 2010. No Import audio from presentation button

In Adobe Presenter 7 and PowerPoint 2007 I have the ability to import existing audio narrations by clicking on Import and then clicking the "Import from presentation" button. The button is missing in PowerPoint 2010. Any ideas on how to get it back?

Hello,
In PowerPoint 2010; "Import Audio from PowerPoint" is missing .We have logged bug for this. And we will definitely fix this in next release of Presenter. Please use PowerPoint 2007 to use this feature.
Thanks,
Shubhi

UCM11g and SharePoint 2010 integration

Hi everybody,
I got a question if it's possible integrate Oracle UCM11g with Ms SharePoint2010. The SharePoint will be the user interface and UCM only the background storage. I found the threads about UCM10g.
Where can I find the information about integration UCM11g and SharePoint?
Thanks
MB

Hi MB,
I am also facing same problem(question). I fallowed http://www.oracle.com/technetwork/middleware/webcenter/owcs-ps3-sharepoint-wcs-wp-335282.pdf link for ingetration sharepoint 2007 with webcenterspaces in this im using PS3 webcenter suite.
have u done this.
i hope in some of link i found SharePoint 2010 doesn't webcenter spaces(ps3).
http://docs.oracle.com/cd/E21764_01/webcenter.1111/e12405/wcadm_documents.htm#BABDHCEC
Regards
Shankar

SkyDrive Pro and SharePoint 2010

Why SkyDrive Pro can no longer sync SharePoint 2010 libraries? I was using Windows 8 with Office 2013 and SkyDrive Pro had no problems with synchronizing content from SharePoint 2010. Now I installed Windows 8.1 with Office 2013 and it doesn't work anymore.
Is there any way to fix it? My colleagues (with Windows 8 and Office 2013) still can synchronize content from SharePoint 2010.

Note that SkyDrive Pro does not support SharePoint 2010 so any issues you have with it won't be looked at by Microsoft.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

FIMSynchronizationService and Sharepoint 2010 August Update

Hi to everyone. I have a question i hope someone here can help.
I recentlly install the update from August 2010 for SharePoint 2010 and the User Profile stop working.
I did some research but i couldn't find a solution.
I notice in my Sharepoint console a pop-up message like this:
"System.ServiceModel.EndPointNotFoundException in OWSTimer.exe 7756"
and did a debug to this error and found the following exception
{"Could not connect to
http://vlaba-sh00:5725/ResourceManagementService/MEX. TCP error code 10061:
No connection could be made because the target machine actively refused it 192.168.0.205:5725. "}
looking at the service i found that the Forefront Identity Manager Synchronization (miiserver.exe) couldnt be started.
every time i started its stop with the following message:
The service: Forefront Identity Manager Synchronization (miiserver.exe)
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="FIMSynchronizationService" />
<EventID Qualifiers="49152">6211</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T18:37:32.000000000Z" />
<EventRecordID>385757</EventRecordID>
<Channel>Application</Channel>
<Computer>vlaba-sh00.latam.com</Computer>
<Security />
</System>
<EventData />
</Event>
The service was unable to start because the version of the database does not match the version of the product.
Event 6211
also had this event:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Forefront Identity Manager" />
<EventID Qualifiers="0">3</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-19T18:37:56.000000000Z" />
<EventRecordID>385758</EventRecordID>
<Channel>Application</Channel>
<Computer>vlaba-sh00.latam.com</Computer>
<Security />
</System>
- <EventData>
<Data>Microsoft.ResourceManagement.Workflow.Hosting.WorkflowManagerException: Forefront Identity Management Service does not support workflows of type 'Microsoft.ResourceManagement.Workflow.Activities.SequentialWorkflow, Microsoft.ResourceManagement,
Version=4.0.2450.5, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.</Data>
</EventData>
</Event>
both version for miiserver.exe and Microsoft.ResourceManagement.Service.dll are 4.0.2450.11.
I think the update fix didnt update the values of SyncDB database for the Identity Manager.
Well, i don't know how to fix this problem. If someone can help me i will appreciate it.
A big hug for all of you and thanxs for advance.

I've hit the same issue before. I was able to resolve it in my environment by stopping and restarting the User Profile Synchronization Service in the farm.
Steps:
Central Admin>System Settings>Manage Services on Server (select the server where the User Profile Service is running)
Stop the User Profile Service
Stop the User Profile Synchronization Service (you will be prompted that this will deprovision the service)
Once the services have stopped, Start the User Profile Service again
Start the User Profile Synchronization Service again (you will be prompted to enter the password for the User Profile Service's svc account) -note1: this service can take a little while to restart; note2: if it does not restart successfully, restart
the server and try again (this has worked for me)
Once complete, the User Profile Service and User Profile Synchronization service should show as Started, and the 2 corresponding FIM services on the server should be running again
From that point on, my errors went away.

Adobe Reader XI and SharePoint Online

We are mapping SharePoint sites as drives for our users, which utilizes WebDav. When users are opening documents that are digital signature enabled, it is prompting them to check in/check out or open, as expected. However, despite which option is chosen to open the file, at the next step, they receive a message stating that the document is part of a workflow and must first be downloaded to a local location (see image).
When opening directly from the SharePoint site, the document opens as usual without any prompts, and without issue. Has anyone else experienced this? If so, how do we fix it?

Maybe this can be helpful:
http://forums.adobe.com/thread/1158136?tstart=0

Adobe LiveCycle Designer and Office 2010

Hi guys,
I'm using Adobe LiveCycle Designer (version 9 / ES2). I try to open a MS Word file, but I receive an error message.
Word (version XP or higher) cannot be found on the machine.
OS: Windows 7 Enterprise
Office: 2010
I read that the version 8.2 of LiveCycle Designer doesn't work with Office 2007 and higher. In this constellation the same error message appears. Is it the same problem on my side? How can I solve it?
Many Thanks,
untalentiert

I'm running Win XP using Parallels 8... LiveCycle Designer is WIndows only and Acrobat XI will only import hyperlinks correctly from Windows versions of Office - which is why I use Office on both the Mac and Windows side, as well as Acrobat XI on both platforms. You can't use the Office plug-ins for Office using LibreOffice (or even Office 2011 for Mac) hence the need to open docs in Word on the Windows side instead of the Mac side.
What I'm confused by is the pricing difference between the packages - I guessing that the $163 package is the 'full retail' and not an OEM or anything - but I don't know if an OEM would even work under a VM with Parallels...
So I may end up with the full retail version, although I'd like to save the $70 difference if I can!
Thanks,
Clinton

How to integrate Adobe Echosign and sharepoint

Adobe EchoSign Support,
I was referred to the following link which discusses the integration of Adobe EchoSign and SharePoint 2010. Here is the link: https://echosign.my.salesforce.com/sfc/p/#300000006IaDOWUzLXIiAnH9NO8_F9WhM_gpxBs
The issue is their is an executable that is mentioned in the link and I cannot locate where to download the executable file. I have an on-premise SharePoint 2010 system.
Thanks,
Aaron W.

Hi Aaron,
Please open a ticket with our support team who can assist directly with this request.
Thanks,
Jat

Adobe 3D, Ver8 and SharePoint 2010

Similar Messages

Maybe you are looking for