Adobe Acrobat Pro 9 pdf optimizer failure..

We have a problem optimizing files in Acrobat Pro 9.
When we try to optimize (Advance > PDF Optimize) the file(s) Acrobat either chrashes, or just say "an error was encountered while processing images".
It is rather large files we have, from 50Mb to 112Mb and up to 17000 pages.
We cant split them into smaller files.
I can´t find anythin in the error log.
This happends on at least 4 computers, whit diffrent settings and hardware.
Any suggestions?
Thanks.

You've likely exceeded your computers' capacity to process the necessary commands specified in the Optimizer settings chosen.
During optimization, a temp file will be created that is approximately the same size as the file being processed. The computer must be able to handle the additional load of each page being analyzed and processed. Text is not so bad, but layered images can be murder on memory.
There are some cases when an optimized pdf might actually end up being a larger file size than the original. Sometimes a simple Save As can dramatically reduce file size.
What is the goal of the optimization? How are you planning to distribute the document? Is there a reason for not providing multiple files instead of one large file? If you can give a few more details, some of the folks here might be able to give some helpful ideas.
FYI: A good article: "Understanding Acrobat's Optimizer" http://www.appligent.com/talkingpdf-understandingacrobatsoptimizer
It doesn't answer your question, but does provide good information about making optimizer choices

Similar Messages

  • Mail in Mavericks sending my filled form Adobe Acrobat Pro PDF files blank, this didn't happened in Mountain Lion, please help!!! :(

    Mail in Mavericks sending my filled form Adobe Acrobat Pro PDF files blank, this didn't happened in Mountain Lion, this where created in Adobe Acrobat Pro X and never had any problems in Monutain Lion, please help me

    Thanks for your response, it is a mail problem, I been sendings filled form PDFs estimates for years from my Mac then yesterday I went from mountain lion to mavericks and the problem started, if I zip or move te files to any other windows or Mac computer it opens fine, the problem is when I attach it to a message in mail it attached the file blank

  • Adobe Acrobat Pro - .pdf to html conversion not exporting correctly

    Hi There - I have downloaded the trial version of Adobe Acrobat Pro. I uploaded a .pdf file and it is saved as a .html file. It looks great on their platform, although when I download the .html file it saves everything incorrectly.  I can call them tomorrow, but I would like to see if anyone has any ideas on why this might be a problem? Thanks so much. -Beth

    You do not have all the fonts embedded, but the basic document looks fine. There is an issue withe the printer setup in your browser that is leading to part of the page running off the paper - but that is a browser issue and not Acrobat. In some cases, a simple fix is to print as landscape.

  • Adobe Acrobat Pro / PDF Datei Splitten und strukturiert umbennen

    Hallo,
    wir haben ein PDF Dokument ca 200 Seiten. Dieses Dokument müsste in 100 2seitige Dokumente gesplittet werden.
    Die Dokumente müssten dann einen spezifischen Dateinamen erhalten, eine 8stellige Nummer die in den 2 Seiten enthalten ist.
    Weiters habe ich ein Excel Dokument mit den entpsprechenden Dateinamen was evtl. auch verwendet werden könnte.
    Hat jemand eine Idee zur Problemlösung?

    Das müßte man skripten.
    Mylenium

  • Why can't I input text (from MS Word, Adobe Acrobat Pro PDFs, etc.) into/onto a certain page?

    I have been having great difficulty inserting or inputting any sort of text or other information onto page 2 of an InDesign document.  (So far, I have 13 pages on seven spreads, and the other pages have been fine.)  Further information:  Page 1 is one type of master ("A-Master" applied), while page 2 (and all pages following) are a different master ("A-Document Master" applied)....  I used a second master for pages 2 and onward, as I wanted to import preferences from another document, to establish a relative degree of uniformity.  I am a relatively new user of CS5.5, but haven't had any major problems thus far with everything else.  My guess is that the text frames for page 2 are somehow embedded above the actual page, and this is affecting import abilities.  However, I can't figure out how to change this.  Any ideas?

    Jongware:  That seemed to work.  There was an extremely small thread I couldn't see before--perhaps simply because I didn't magnify things--that I didn't catch.  (This was left over from the original master creation process, when I imported things from another InD document.)  I took care of the problem.  Thanks to you and everyone for your kind advice and assistance!  Best wishes, JS

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

  • I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

    I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
    Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
    Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

    PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
    This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
    (see ISO 32000 for what PDF "is")
    What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
    Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
    Be well...

  • I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help!  Chris.

    I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help!  Chris.

    It would be helpful to know what version of Acrobat, WORD, and operating system.
    Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
    You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.

  • How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which makes a PDF of a web page interactive, to work in Firefox 4.0.1?

    I just installed (on my Windows 7 Ultimate (64 bit) operating system/Intel i5 CPU M560 2.67 GHz) and am now using as my default browser Firefox 4.0.1 because Internet Explorer 9 was giving me so much trouble--lack of display of web content, lack of PDF reproduction when web content displayed, screwball formatting display, etc., all of which has been remedied by the mere installation of Firefox 4.0.1.
    How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which converts a web page to an interactive PDF, to set up and work on Firefox 4.0.1?

    You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

  • I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader with Mavericks!

    I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader.  I tried on both MacBook Pros we have here, both now with Mavericks.  Error message says "Opening printer connection failed.  Unable to open printer connection . . . "  This is after it says sending data, printing, shows the percentages etc., but then at the end I get the error message above.  I can print a PDF (same one) from Preview, but not from Acrobat!  What's going on?  Never had this issue before Mavericks . . . Please help.

    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Adobe Acrobat Pro failed to print pdf file

    I downloaded adobe acrobat pro and started the 30 trial version just a few minutes ago.
    I could open files through adobe acrobat and convert word files to pdf, but when i tried converting a publisher file it could not go through. An error popped up which read "Adobe PDF printer failed to print pdf file".
    The publisher file I am hoping to convert to pdf is a 21 page panorama article. It contains lots of images and a variety of font types.
    I do not know other alternatives for solving this issue.
    Your help will be very much appreciated.
    Thank you!
    Erik

    It seems to be that Adobe Acrobat virtual printer is not properly installed on your PC or you are not selecting Adobe PDF printer to print PDF document. Checkout the below screen shot to see proper printer.
    After trying this if you have same problem you may trt some other virtual printer that easily convert or print any file as PDF, you may checkout here.

  • How can I add a button to add multiple image in PDF from using adobe acrobat pro?

    I have to create a pdf form using Adobe Acrobat Pro X.
    In this form I want to add a button where I can add multiple images to the field.
    I have tried using javascript event.target.buttonImportIcon(); and successfully add an image, but when I want to add the 2nd image it automatically overwrites the previous one.
    Is there any way to solve this issue? I would like to have a form where I can add a lot of images in it. It is possible in word, but we really have to use adobe.
    Thanks

    Hi thanks for your answer.
    I can add multiple button, but if there are 10 images that I wan to add, then I have to create 10 buttons.
    Moreover, the pictures will be placed on top of each other and it means that you cannot see it clearly.

  • PDF files opens in Adobe Reader  9 but not Adobe Acrobat Pro 9

    After one of my users digitally signs a PDF file, and saves it, he cannot open it again.
    He gets either a reference memory error or a Font Capture error.
    I can open the same PDF file with Adobe Reader 9 and Adobe Acrobat Pro 8.
    If  I take the same file to a system with Adobe Acrobat Pro 9 - same error on the same file.
    Happens to my administrator account as well.
    Acrobat Pro 9 version: 9.4.1
    Adobe Reader version: 9.4.1
    Acrobat Pro 8 version: 8.2.5
    Windows XP SP3
    IE 7
    Acrobat Pro 9 has been completely uninstalled, the system rebooted, and the software reinstalled.
    Customer's profile has been rebuilt.
    The error message in the event log are:
    Event Type: Information
    Event Source: Application Popup
    Event Category: None
    Event ID: 26
    Date:  1/31/2011
    Time:  12:56:02 PM
    User:  N/A
    Computer: XXXXXXX
    Description:
    Application popup: Font Capture: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".
    or
    Event Type: Information
    Event Source: Application Popup
    Event Category: None
    Event ID: 26
    Date:  1/31/2011
    Time:  1:13:06 PM
    User:  N/A
    Computer: XXXXXXX
    Description:
    Application popup: Adobe Acrobat Pro: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".

    So the option was already checked when opened the document. I went ahead and unchecked, closed, reopened just to test and it's still not displaying correctly.
    In response to Bill@VT. The image is on top of a white background so I can't tell if there is space there or not, it's just all white.
    She showed me another document that's doing something similar today. This time the pdf was done with a green background and now the background shows as white. It was created the same way with Indesign and it shows fine in Reader and the Windows preview pane just not Acrobat. I'm trying to get the user to find the installation media so I can remove and reinstall, but I'm not sure if she will be able to find it.

  • I'd like to disable my expired trial for adobe acrobat pro XI because I can no longer view pdfs without getting a subscription

    I'd like to disable my expired trial for adobe acrobat pro XI because I can no longer view pdfs without getting a subscription

    Un-install Adobe Acrobat and repair the installation of Adobe Reader.

  • Problem with pdf-printing in Adobe Acrobat Pro

    Hi,
    I have Adobe Acrobat Pro 9.4.3.
    PDF-printing has always worked great but suddenly there is some kind of problem.
    After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
    So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

    You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
    You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
    Read about the problem here: http://www.tidbits.com/article/12078

  • How do I add a functional "submit button" to a pdf form in Adobe Acrobat Pro XI ? I created the pdf form in Adobe Forms Central.

    How do I add a functional "submit button" to a pdf form in Adobe Acrobat Pro XI ? I created the pdf form in Adobe Forms Central. It's for an online Diet Questionnaire. After people complete the form I'd like them to click "SUBMIT" and the completed form will be emailed to me.

    This can be a bit confusing because Acrobat 11 comes with the desktop app that allows you to create simple PDF forms without having a FormsCentral account. Some people find this helpful, but you need to understand that when you generate the PDF form, it is Reader-enabled by Acrobat. In order to edit the form further in Acrobat, you have to create a non-enabled copy of the form. You do this in Acrobat by opening the form and selecting: File > Save a Copy
    and opening the copy. It is not opened automatically.
    You can now add a button and set it up to submit by email, either using a "Submit a form" action or the submitForm JavaScript method. You can set it up to include just the form data or the entire PDF, and will want to use a mailto type URL. Submitting the form to the FormsCentral server has a number of important advantages over email (much more reliable, more secure, etc.), so you might want to consider it.
    If the form needs to be saved with Reader versions prior to 11, then you will need to Reader-enable the document. In Acrobat 11 you do this by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools

Maybe you are looking for

  • Getting # instead of £

    Hi, I have the problem for viewing the pound sign in the front end. Instead of pound sign i see the # sign. Could you please tell us what nls settings needs to be done on the database side and at the client side. Thanks Vinayak

  • EPrint images on A4 paper (override photo tray)

    The technical specs for ePrint clearly state that it should be possible to override the photo tray when printing images: (see here): Image files that are submitted as attachments print by default on 101.6 x 152.4 mm (4 x 6 in) photo paper from the ph

  • Multi-Channel (more than stereo) Audio Editing

    Hi, is there a way of setting Audition, to when opening multi-channel WAVs, to open them all in one display? Currently, if you open a stereo WAV, you get both channels visible so you can edit both channels as one. However, if you open a 5.1 WAV, you

  • Final Cut Pro wont start

    Hi, Since I took my Imac into be repaired Final Cut has ceased to work. Everytime I try to start it up I just get the message: "The Application Final Cut Pro quit unexpectedly". The error message in report says this: Dyld Error Message: Symbol not fo

  • How to recover the old data

    Hi all, i got a new iPhone, i had tried to restore data from the old iPhone to the new one. Unfortunately, before restoring the data i forgot to copy some importance documents and pictures from the new one. so after restoring, those documents are los