Adobe Captiavte 5.5 Published files getting Blurr :(

  Hi All,
I have gone through almost every post related to this topic but unfortunately was not satisfied . I also know that I may have not understood the method /steps correctly, to improve the published files quality.
Now coming back to the question, my problem is that whenever I design any project in captivate 5.5 (liscence version) and try to view the published the file through the HTML page; my captivate file looks blur (refer attachment 1.jpg), BUT if I launch the published .swf file it looks crystal clear. (refer attachment 2.jpg).
This makes me upset, coz I have done all the recommended settings (as per read in the adobe forum) in my captivate source (.ctpx) file. Below is
the setting which m using before publishing the file:-
1. I have kept the swf size and quality as High (Preferences > Projects > Swf Size and Quality > High) also the checkbox is kept unchecked for compress full motion recording SWF file option.
2. I have kept the slide quality as High in Properties tab. ( Properties > General > Quality > High(24-bit)).
3. I have not used any borders in the project (Windows > Skin Editor > Borders), and also the checkbox is kept unchecked for Show Borders.
Secondly, I have also observed that if I use TOC than my project looks clear when I view the project via the HTML file and if I do not use TOC the file gets blur when I view it in HTML file. (refer attachment 3.jpg).
Please let me know where I am going wrong while publishing the captivate project.
Awaiting for the reply as earliest as possible,
Thank You in advance, for your inputs on this topic '

Hello RodWard,
Thank You for your update. I cross checked the project on other browser like Firefox and it is looking very clear in Firefox. So now we can confidently say it's a browser issue. But unfortunately, we (my company) are bound to use IE as our browser (due to company policy).
Can’t we do some settings in order to get this resolved in IE? Do you have any idea how can we overcome this issue in IE?
Regards,
Deepak Pardeshi

Similar Messages

  • I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the

    I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the window!! Can you tell me what is the problem? No it does not exceed 100 M. either.

    Adobe Reader never converted Publisher files to PDF, for free, never. I suspect you use to have the (paid for) Adobe Acrobat. Sometimes people have Acrobat (more than $300 worth) and install Adobe Reader over the top, losing that valuable software.
    That said, if you subscribed to PDF Pack it should do this conversion. What exactly happens now.

  • Using Adobe Presenter 7 when published to PDF video files do not play just a blank page, any ideas?

    Using Adobe Presenter 7 when published to PDF video files do not just a blank page, any ideas? I am using office 2010 and Adobe Acrobat 9 on my PC any suggestions would be very helpful as the audio and slides work fine though no SWF files work just a blank white screen
    Thanks

    The problem seems to be with Acrobat 9. Can you share any such pdf generated from presenter at [email protected]
    Alternatively, you can try to download Adobe Reader 10 http://get.adobe.com/reader/?promoid=JZEFU and try to view the published output usingthe same.

  • Adobe will not convert a Publisher file to PDF - it indicating an ERROR

    Adobe will not convert a Publisher file to PDF.  It is indicating an error

    Hi brussels1965,
    Please let us know the Adobe Application you are using and also the error message that you are getting.

  • My Adobe Programme has taken over my Publisher Files~Help!

    My adobe programme has suddenly taken over all of my Microsoft Office Publisher files; renamed them as PDFs, but wont allow me either to open them as PDFs (which I don't want anyway!) or allow me to convert them back to Publisher Files, which is how I want them!
    I know I have obviously changed a setting somewhere, but I don't know how or where!
    When I uninstalled Adobe I got all my Publisher files back but now, of course, cannot open my PDF files.
    I reinstalled Adobe in the hope that it would sort itself out, but it has snatched all my publisher files again!
    Help!
    I really have no idea how to resolve this and would be very grateful if any experienced ADOBE person can advise me. Thanks.
    Ken

    Hi Claudio,
    Thanks so much for responding.
    My operating system is Windows 7.
    I will give what you suggest a try and let you know how I get on.
    I really appreciate you taking the time to contact me.
    Kind regards,
    Ken

  • How did my pdf files get converted from 'open with Adobe Reader' to open with Adobe Acobat'?  And if I have a ''free'' Acrobat account why does it not open?  When I do click on the account it ask me to pay $89.99.  I never wanted Acrobat.  How can I get -

    How did my stored files get converted from 'open with Adobe READER' to 'open with Adobe ACROBAT'? How can I get them re-set to open with 'Adobe Reader'?
    Please reply to my e-mail:   [email protected]

    It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
    The free Acrobat account has no connection to any of this.

  • How can I get "library components" for Encore? download from Adobe site is corrupted/missing files

    How can I get "library components" for Encore? download from Adobe site is corrupted/missing files.  I have tried 3 times to d/l and each time problems.  HELP please!
    I just want the DVD templates and buttons that would come with actual purchase of Encore.  Having creative cloud subscription should not limit this for me, right?
    BTW I have CC subscription, Windows 7,

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • Old files get 'published'

    I've got a RH X5 project here, and I'm publishing FlashHelp
    files. Over the course of development, I've added, deleted, and
    moved topics and folders within the HTML Files folder on the
    Project tab. A lot of times, when I'd add a new topic, it would be
    outside of the folder I ultimately moved it to later. It all looks
    lovely on the Project tab. But when I publish, RH seems to be
    popping out duplicate or deleted topics. When I look at my
    published files in Windows Explorer, I see that my folders appear
    as they do on the Project tab inside RH, and topics inside my
    folders are correct. But outside these folders are lots of old or
    deleted or duplicated help topics. I've tried publishing with
    'Check for deleted files' checked and unchecked, and 'Republish
    all' checked and unchecked; these options don't have any effect.
    Everything works OK in the help system, but I'm getting ready to
    turn it over to the client, and I'd just like it to be tidy.
    Does anyone know why this happens? Thanks.

    Yes, if you move a topic from one folder to another in the
    project, it will get published in the new location. But since
    there's no link to the old one, it just takes up space and feels
    messy.
    Another approach is to let RH publish revised files and
    manually clear out the obsolete material. If you keep on top of the
    situation, it's not a lot of trouble.
    If things get out of hand, you can used Beyond Compare to
    spot the orphans.
    (Please see the current thread, "File comparison for
    RoboHelp?")
    Harvey

  • Adobe Send - Problem with uploading files. When is this going to get fixed?

    When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
    I then go to Adobe Send Now and it works fine.

    The problem is the same as described in other similar threads.
    I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
    I have tried to upload the file to the site with similar results - error and the file doesn't go.
    I can go to the old SendNow site and it works flawlessly.
    If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
    Sent from my iPod

  • How do I get Adobe Photoshop to stop scanning files?

    How do I get Adobe Photoshop to stop scanning files each time I plug in a flash drive?

    Louie,
    You need to give us a few more details... Your post left me for one
    scratching my head...
    I can only assume that you are referring to PSA's looking for images on your
    HDD, but the context is for me lost..
    Cheers

  • I was using Adobe Send Now for the longest time to send files; there was never a charge for it.  Now, does Adobe Send replace Adobe Send Now and is there a charge or fee for Adobe Send?  I can't get it towork!  Paul Madsen

    Does Adobe Send replace Adobe Send Now and if so, is it only available on a subscription (fee) basis?  Adobe Send Now was free; I was never charged for the service.

    Dear Sir or Madam at Adobe:
    Does "Adobe Send" replace "Adobe Send Now" and if so, is there a charge for it?  I was never charged for using Adobe Send Now.  I cannot get Adobe Send to work for me; I can upload the file from my computer but when I click the box to send a "personalized link" a message box drops down asking me to upgrade.  When I say no thanks, the message disappears but the box click does nothing.  Do I have to subscribe to Adobe Send and pay a monthly fee for it before I can use it?  Please explain what change has been made and what is going on with this program/service.  Thank you.  Paul Madsen 763-781-9118  [email protected]

  • In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

    In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

    How would I check to see if the like works when I enable via the inspector pane
    If you enable hyperlinks when you click on the link link to the pdf file it will open a browser window and display the pdf file.
    I upload the pdf files to the server and link to them as if they were an external web page:
    That's been more reliable for me than linking to the file as Link To: A file and have iWeb upload the pdf file to the serve.

  • Adobe Edge Animation published file slow to load on browser

    Hi
    I had a bad experience with Adobe Edge Animate as when I upload published file to my server it been slow to load the images and sounds, here is the links for the published file I had created at Adobe Edge
    ventureadvertising.net/simon/slider.html
    ventureadvertising.net/Javier/Start/Start.html
    ventureadvertising.net/Eric/responsive/sliderv3.html
    all these links take time to load I had to refresh again to load the file
    Thank you

    Hi Tanya,
    http://forums.adobe.com/message/2816273#2816273 like in this thread i used "On application start interaction" and i slected my swf files to load in application start.But i think nothing has changed.this the web site which i upload after that changes...http://www.fndim.com/altis2/main.html
    I think the problem is, in the preloader my embedded swf files doesnt installing to the browser...i want that everything is intalling with the preloader in the begining.If you want i can send you my fxg file..but i dont know how can i send it to you ?

  • MS publisher 2010 to PDF using Adobe Acrobat X Pro produces outlines on some of my images that are not there on the publisher file!

    I am helping a client publish a book through Createspace. We are both using Windows 8 OS. She created her document in MS Publisher 2010. I made the necessary edits to her book, (111 pages) and saved it as a pdf for commercial printing. The resulting pdf puts lines on some of the images. (All the images are jpg format, but it only happens to some.) I have tried creating the pdf in several different ways including print to PDF, Save as PDF, and Save and Send Wizard for commercial printing. I have also tried deleting and reinserting the images. I don't know what else to try. Does anyone have any ideas.
    The image below shows what I mean. On the left is the Publisher File, on the right is the PDF.

    I agree with your statement; even for a particular document, if I choose to "Print on both sides" and then print again immediately after, "Print on both sides" will be deselected.
    However, I'm not sure what you're implying by you're statement. I'm asking precisely why this setting isn't sticky. Acrobat uses a non-standard printer dialog; in the usual dialog I can easily set a defualt duplex setting. I almost always want to print duplex. Why can't I do this by default in Acrobat?

  • Change .mp4 Icon on published files from Adobe Premiere Pro CC 2014

    When I export my Adobe Premiere Pro CC 2014 file, to a .mp4, the thumbnail icon of the final file doesn't pick up the first frame. (which is a still shot, title shot). Instead, it picks up the first frame of the first video clip at about 5 seconds in.
    How can I set the this to pick up the first frame?
    I can upload the file to YouTube, and change the custom thumbnail fine, but when the video is embedded on a page, it pulls the this same icon instead of the desired first frame.
    Thanks for helping!
    James

    I contacted Adobe customer service and they directed me here.
    They told me that they would transfer the chat to the appropriate group but ended up giving me this community forums link.

Maybe you are looking for

  • To repair or not repair, permissions that is?!?

    I'm planning to update to SL and have been reading discussions about a recommendation to repair permissions before and after the update. Does this sound correct? and if so how do I do this? Thank you for your time.

  • Documents are not displaying

    Dear Experts, Some documents have been posted,but they are not being posted to the respective ledger and not even displaying in FB03.It is showing the documents do not exist. where as FBN1 suggests,the documents are being captured.What could be the r

  • Tracking of Service master LONG TEXT changes

    Hi , I know we have functionality to track changes made in a Service master thru Change Documents .... but it doesn't show the changes made in SERVICE MASTER long text. How can we see those changes ? Regards shrey

  • SAXParser noSuchMethodError occurs in execution, not in debug with Forte

    Hi gurus Im having some trouble with parsing an XML file using xerces. Basically all i want to do is take a list of XML files from a JFileChooser and then change the list to display the value of an attribute within that file instead of the original f

  • Bi_author_role

    Hi, what is the use of bi author role in obiee_11g thanks