Adobe Reader V11 not going back to default settings after print

Hi Guys, First time on this forum. Im having a problem with one of our clients Adobe Reader software, They have the latest version installed
When printing they select the options they want i.e "multiple" (Only happens when you change something in here)
Then even if they close down adobe (have made sure the task isnt running in task manager) start it and go to print another PDF it opens to this page automatically and you are required to set them back manually
Any help would be much appreciated
Thanks
Mike

Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Open the setup page of router using 192.168.1.1 then put in the password as admin...all you need to do is do the wireless settings such as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet
Requests & it will definately work!!!

Similar Messages

  • InDesign always goes back to Default settings

    I cannot seem to get my settings to stay. If I have to force quit for any reason, the default settings always come back its is so frustrating. I also always have to open the tabs bar even though I check the tabs in the menu, every time I reopen the document, the tabs bar is gone....is this the norm? I am using Tiger, 10.4.11 on a G5 Powermac.
    Thanks!

    >The next time I am forced to force quit,
    you must make your settings then quite not force quit. When you quit ID thats when the app writes the new settings as default when you force quit ID does not have the chance to save these settings. you must follow the prceedure in post 2.
    If you can only force Quite ID there is something wrong with your computer.
    first thing I would do is Archive and Install the OS.

  • MacBook Pro screen saver keeps going back to default settings

    I use the Vintage Prints screen saver and always change the folder of photos to the most recent folder of photos I have taken. (I am an avid photographer and take lots of pictures.) Periodically the screensaver reverts back to the default settings: National Geographic photos, not shuffling the slide order. This has happened multiple times. Why won't it keep my settings?

    Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
    Open the setup page of router using 192.168.1.1 then put in the password as admin...all you need to do is do the wireless settings such as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
    Also,the advanced wireless settings to Beacon Interval=50,Frag
    thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet
    Requests & it will definately work!!!

  • Apple Mail (7.3, OSX Mavericks) reverts back to default settings after close.  How to fix this?

    For example, if I choose Mail->Preferences->Viewing->Use classic layout, it reverts just fine when the program is open.  However, when I quit out of the program and then reopen it, Apple Mail reverts back to its default styling.
    Any help would be appreciated.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Touchpad goes back to default settings on reboot

    I am using Synaptics touch pad (v 19.0.12.95).Everything was smooth as long as i was running windows 8.1. However, after windows 10 upgrade, synaptic settings change to default values everytime on reboot. Everytime I need to unclear the "enable reverse scrolling direction" and the box returns as checked upon reboot..

    I found the same issue.  Appears to be an issue with Version 19 of the Synaptics driver which loads with Windows 10.  Fixed the issue by installing Version 18 of the Synaptics driver that was applied to Win 8.1.  The problem will re-appear because windows 10 will automatically re-load Version 19 via windows update.  so to stop that happening you may have to disable driver updates in win 10. Maybe this has been reported to Microsft and Synaptics ??? and the issue will be corrected in a future driver release.  Clearly it was all OK in win 8.1

  • HT2506 I prefer Preview as my default reader. Somehow Adobe Reader has locked itself as the default. How do I reset back to Preview?

    I prefer Preview as my default reader. Somehow Adobe Reader has locked itself as the default. How do I reset back to Preview?

    First order of priority - Establish what platform is in use. In this case: MacBook Air with Trac Pad, no Mouse.
    Second - Establish Operating System in use. In this case: OX 10.8.3.
    Third - Establish, as best as you are able, the parameters in which you have been attempting a work-around and, to include mention of, any other secondary software program capable of becoming a default other than, in this case, Preview. 
    Fourth - State the problem: Adobe Reader somehow automatically has become the Default PDF viewer.
    Here's my answer: When a trac pad not a mouse is in use - Select the PDF you will be opening; don't open it, Select it. At this juncture, tap COMMAND - I (Unfortunately Apple has no Drop Down Menu motion to achieve this operation that I can determine); at this point you will get this:
    Click on "Open with: " If you see Adobe Reader there in lies the problem. So, simply click the "up/down" arrows on the Selection Window, and from there click on Preview. From there on Preview will be your Default program.
    Thank you to everyone who helped in reply to my initial query.

  • Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).".  Is fix the same as on previous OS versions?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Security
    and check the box marked
    Allow Plug-ins
    Then click
    Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • Adobe Reader will not email my .pdf files.  Message: "Email has not been set up on this device."

    Adobe Reader will not email my .pdf files.  Message: "Email has not been set up on this device."  I have 4 email accounts that have been set up.  When trying to email from Adobe, the email screen does come up, but does not allow me to enter any recipients in the field, and when I try, the email page's fields simply goes blank and disappears, taking me back to the document I am trying to send.  After trying repeatedly, I get the message about needing to set up my email.  My mother and I have also noticed that when  we try to open documents sent in A.R., they may open, or just go blank.  Any suggestions or fixes?

    Setting up your email is a bit out of the scope of this forum. I'd suggest asking for help in the Apple forums devoted to the iPad. Good luck.

  • When closing browser looses all my settings and goes back to default on reopening

    I set what I want in options like do not remember history and font size and do not show download window when installed. every time I shut it down and restart it later everything goes back to default.

    It sounds like a problem with the preferences file, for details on fixing it see the [[Preferences are not saved]] article.

  • My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker  while calling

    My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
    AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakers

    I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
    I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
    The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
    IdleActionSec=9min
    IdleAction=suspend
    Will check it and report back.

  • Adobe Reader will not open PDF in browser simple answer.

    I just had this problem and was able to work through it with the help of tech support from TD Ameritrade.  The fix is simple so read on.  After uninstalling and reinstalling all things adobe and trying other recommendations on these forums I was stumped.  I called my broker tech section since I couldn't open their reports and we identified what my specific problem was.  For me, and I imagine some of you this will help and prevent a lot of wasted time.
    Nothing was wrong with my Adobe Reader.  My problem was that I have a 64 bit operating system and both of my default browsers were 64 bit browsers.  I did not know my internet explorer default browser was the 64 bit one until the technician that assisted me informed me that a recent windows update made all 64 bit systems default to 64 bit internet explorer browsers.  You cannot change that default by choosing between 64 bit and 32 bit, because you can only choose internet explorer.  That explains why my attempts to open with a 32 bit browsers always failed.  I also tried with Firefox thinking it was 32 bit and it failed as well.  The technician informed me Firefox is a 64 bit browser and then it made sense.  I guess the recent Adobe reader update caused a change that no longer allowed my 64 bit system and 64 bit browser to open PDF's through the browser. The technician who assisted me has a 64 bit system and only uses 64 bit browsers and can still open PDF's through those browsers.  That confused us for a while until we realized he had his Adobe updater turned off and therefore had not been exposed yet to the update that originated my problems.
    ****ANSWER FOR MY PROBLEM*******The quick answer is use Google Chrome or some other 32 bit browser.  If you set a 32 bit browser as your default, the PDF's will open.  You cannot set Internet Explorer 32 bit browser as your default if you have a 64 bit system and also have 64 bit Internet Explorer.  The windows update prevents you from doing it.  At least that is my understanding. 
    The bottom line is I have the newest Adobe Reader on a 64 bit system and can open any web PDF with Google Chrome set as my default browser, because it is a 32 bit browser.  The new Adobe Reader will not open PDF's with a 64 bit browser in Vista.  A 64 bit system is fine as long as you use the 32 bit browser to open your PDF's in Vista.  I hope this helps some avoid some headaches.  I wish it had been posted when my problem first arose. 
    I think you can use a 64 bit browser in Windows 9 or later, but for Vista the above applies.

    Yes I can create a short cut to internet exp. 32 bit on my desktop and I can even be using Internet expl. 32 bit, but when I try to open a PDF with adobe reader it won't work with internet exp. as my default browser b/c windows will always choose Internet exp. 64 bit which isn't supported yet by adobe reader.  With google chrome as my default browser windows can't choose an unsupported 64 bit browser in its place b/c google chrome doesn't have a 64 bit version.
    My post was for those people who may not have realized yet that windows would not ever choose Internet expl. 32 bit over Internet expl. 64 bit if both exist on their system.  For them it is easiest to just choose a default browser that only has a 32 bit version. 
    If I understood your reply correctly, you were telling me how to create a shortcut to Internet exp. 32 bit on my desk top.  However, having that shortcut on my desk top and opening my browser through it will not prevent the problem of windows choosing my Internet exp. 64 bit browser for pdf's I try to open from the web.  Thank you for your response, but I think the problem that I have tried to explain does exist for many users and can only be fixed by using a 32 bit browser that is not Internet explorer as your default browser.  At some point if windows fixes the update that always chooses Internet expl. 64 bit over Internet expl. 32 bit, then this will all be irrelevant.
    Thanks
    Sent from my iPod

  • Adobe Reader Will not open any Type of PDF

    I resent days I have had to deal with my Adobe Reader X not wanting to open and show any type of PDF's whether it is from a downloaded file to a PDF that is being opened on the web.  It will give me a blank black screen and tells me that adobe reader is unavailable and should be restarted and when I do this is still does not want to open anything.  I have uninstalled and reinstalled every adobe format on my computer and it still will not open a PDF and not I am left to wonder what is going on.  If there anyone else that is having his problem at this time?

    My system is windows 7 32-bit
    Adobe reader X 10.1.3

  • Adobe Reader could not open a pdf file - either not supported file type or file damaged

    On March 5th, I started getting the Adobe Reader error message "Adobe Reader could not open a pdf file because it is either not supported file type or the file has been damaged.
    I get this when I try to open the pdf file as an attachment in Outlook 2013 from my G-Mail account.  If I save the attachment and then try to open the pdf document, I get the same error4.
    I get this error message with every pdf file that now comes to me in Outlook.
    If I log on to my G-Mail I am able to open the pdf document.  If I also save the attachment to my computer, I do not get the error message when I open the pdf file. This would suggest the file is okay
    This would lead me to believe the problem maybe with Outlook.
    I'm using Adobe Reader XI v11.0.10
    I'm using Windows 8.1
    Is anyone encountering this same issue with outlook?

    I copied it again.  Do you see it?  BTW, how do I set privacy?  (I'm new at this)
    I opened with two different notepads and got different information.here it is from Windows Notepad.  First few lines are:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd
    >
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <style type="text/css">td img {display: block;}</style>
    </head>
    Here it is from MS Notepad:
    <HTML><HEAD><style>.ending {font-family: Calibri; font-size: 18px;}</style><BODY><TABLE><TR><TD colspan=100%><a href="http://www.trulynolen.com/questionnaire?l=14115468&o=141050070&z=85087-7515"><img src=http://newsletter.tnolen.com/email/service.png border=no></a></TD></TR><TR><TD align=center class="ending">If you would not like to receive email communication from Truly Nolen in the future, please <a href="http://newsletter.tnolen.com/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]">click here</a></TD></TR></TABLE></BODY></HTML>

  • Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type...

    I have a website that holds 23 different PDF's. They all download fine and open correctly when downloading from a Mac computer. They even download and open fine from a Mobile Phone. However my client is getting an error over and over again. I have tested it out and this is what I have come up with.
    Error:
    Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn't correctly decoded)
    I have resaved the PDF's to be compatible with Reader 6.
    Works fine with
    All Mac's using either Firefox, Chrome or Safari using Pro and Reader
    iPhone downloads using iBook
    PC's when downloading from Firefox viewing in Reader 9
    PC's when downloading from IE 6.0 view on Reader 8
    Error Message When
    PC when downloading from IE 7 viewing on Reeder 9
    PC when downloading from IE 8 viewing on Reader 9
    Here goes the URL when the files resides.
    Please help. I can not find a solution.

    Hi i have solved the ie bug creating the pdf phisically, this is the code i use:
    $hostname = "XXXXXX";
    $database = "XXXXX";
    $username = "XXXXX";
    $password = "XXXXXX";
    $db = mysql_pconnect($hostname, $username, $password) or trigger_error(mysql_error(),E_USER_ERROR);
    mysql_select_db($database, $db);
    $query_rs_docs = "SELECT * FROM doc WHERE doc_name='".$_GET['doc_name']."'";
    $rs_docs = mysql_query($query_rs_docs, $db) or die(mysql_error());
    $row_rs_docs = mysql_fetch_assoc($rs_docs);
    $totalRows_rs_docs = mysql_num_rows($rs_docs);
    $t_pdf = fopen("/path to doc folder/doc/".$row_rs_docs['doc_name'], "w+");
    fwrite($t_pdf, $row_rs_docs['doc_file']);
    fclose($t_pdf);
    header('Location: http://www.portalesardegna.com/doc/'.$row_rs_docs['doc_name']);
    the db table (doc_name must contain the .pdf extension):
    CREATE TABLE IF NOT EXISTS `doc` (
      `doc_ID` int(10) NOT NULL auto_increment,
      `doc_name` varchar(255) NOT NULL,
      `doc_file` longblob NOT NULL
      PRIMARY KEY  (`doc_ID`)
    ) ENGINE=MyISAM;
    Message was edited by: Portale Sardegna

  • Firefox should allow users to maintain their zoom setting when switching to a different page, instead of going back to default every time.

    Page text appears very small on laptop while utilizing full resolution on a dell XPS laptop. Zoomed-in a notch or two it looks good. Readable without squinting. But browse to a different page, and its tiny all over again. Firefox, being the best browser on the web, should think about allowing users to maintain their zoom value when going to a different page, instead of going back to default. Just an idea... I know there's alot of laptops out there and if it's hard for me to read with good eyes, I'm sure it's hard for others.

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

Maybe you are looking for