ADSL2+ question for Mods

Hi everyone.
We live in a rural setting and our local excange according to
http://www.dslchecker.bt.com
says we'll be getting ADSL2+ as from tomorrow 30/11/2013
Currently we get about 2.5Mb (with virgin media we were getting just under 5Mb but they were charging us £32.00 a month for it)
What sort of speed increase can we expect from tomorrow????
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 5
3 to 7.5
30-Nov-13
ADSL Max
Up to 3.5
2.5 to 4.5
Available
Fixed Rate
2
Available

Hi tonyj154
If your able to post your line ADSL stats such as line attenuation, noise margin, ect then this will help the community give their opinion on if your line will benifit from ADSL 2/2+.
The upgrade BT Wholesale are on about is the upgrade to the BTW 21cn network at your local exchange which allows ADSL2/2+ if your line is able to cope with the higher frequencies.
As a BT Retail broadband customer and still in contract thenonce your exchange has been BTW 21cn upgraded then your will automatically be migrated to the new 21cn network. However be aware that this can take days to weeks to months after the exchange is upgraded as the lines have to be manually migrated over in batches.
As to the BTw 21cn network which allows ADSL2/2+ modulation (upto 12/20mbps), the ADSL2/2+ modulations are more aggressive to any noise on your line. It may also increase your line attenuation by 2/4dB, therefore on longer lines it can make the connection unstable if your line isn't able to cope with these higher frequencies.
Also when your exchange has been 21cn upgraded, the lines have to be migrated to the new 21cn hardware in the exchange in batches so it can take days/weeks/months for all the lines to be migrated over to the 21cn network. Also you may be kept on ADSLMax (upto 8mbps) modulation but on the 21cn network if your line isn't able to cope with ADSL2/2+.
Also be aware that if your line isn't estimated to be able to get 8mbos or over on the Adsl2/2+ modulation or your line can't cope with the higher frequencies then your line may be kept on ADSLMax line modulation though on the 21cn network.
In my experience, when we were moved to the 21cn network we were kept on ADSLMax (due to having a very long line).
Cheers
I'm no expert, so please correct me if I'm wrong

Similar Messages

E-mail tie up - question for Mods

I recently had BT infinity installed and came back to BT for my broadband.
While I was with my other broadband provider I took my BT e-mail address (and sub accounts) with me.
I was paying BT per month to keep my BT e-mail address, now I am back with BT I obviously wont need to pay as the e-maill address is part of the package.
Can you advise please how I can tie up my existing e-mail address (and sub accounts) with the new e-mail address that I created when I signed up for BT infinity ?
Kind regards......John

Hi John
I can help with this e-mail situation.
Send me an email to the email address in my profile. Please remember to include your BT account number, telephone number and a link to this thread.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

A Question For Mods

If you want a reply from the mods, its best to complete a contact the mods form and they will look properly at the issue.
I dont think the PS3 is wireless N, so using old technologhy. You could always try home plugs?
John

gg30340 wrote:
Johnelf wrote:
If you want a reply from the mods, its best to complete a contact the mods form and they will look properly at the issue.
I dont think the PS3 is wireless N, so using old technologhy. You could always try home plugs?
John
The moderators have changed they way they are contacted. See this link
http://community.bt.com/t5/Announcements-Terms/Change-of-Mods-Contact-Us-link/m-p/931648#M126
You don't contact the Mods anymore unless you are invited.
This is poor?

Facts and Figures - A Question for the Forum Mods

A bit of a daft question for which I am sure the Forum Mods can provide an answer.
How many folks were registered on the old forum and how many on the new one?
I just want to put something BT Chairman Sir Michael Rake wrote to BT shareholders this month into context.
"To forbid us anything is to make us have a mind for it."
-- Michel de Montaigne, Essays, 1559

Naughty naughty General - they dont do "daft" on this forum, you should know that.
"You may well think that, I'm afraid I could'nt possibly comment"
Francis Urqhuart, who was never known by his initials to his friends.
AQ.
"Welcome to Royston Vasey - You'll never leave."

I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Final Cut Pro 10.0.8
I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TOP questions for Eseries devices - not so new!

Just noticed that the thread titled:
TOP questions for Eseries devices - start here [new]
Really isn't so new dated 30-Cot-2007 11:48 AM - last edited on 30-Oct-2007 11:48 AM
The post suggests that the first thing to do is update to the latest version of software.
Alas the last update for E72 was 27 October 2010 which is flawed! I know as my phone has misbehaved since installing it and I see other users reporting similar if not the same issues here.
*#0000# reports version 052.005.217.11
Question - How does one down grade to previous version?
The post then suggests "If you still experience problems, you can try if formatting your Eseries device helps. Format the device by dialling *#7370#. The device will request a security code, the default code is 12345 unless you have changed it."
Well actually on the E72 this does nothing! I Type in *#7370# and its displayed to me and nothing else happens. If I enter *#0000# I get the version number so it seems the software/firmware does not understand the code above!
I did try 'factory settings' option from one of the control panel menu's instead at some point of my misery but was surprised by just how little effect that had - many things were not reset.
If your still reading, I thought I would share some steps I have found to sometimes help on E72 when it appears to hang / stall:
1. Try holding down the home button and if the running applications bar is shown try closing the applications by pressing the delete (backspace) key.
2.- If that fails try pressing the off button and selecting 'offline' mode - This sometimes works - if it does then try previous point before going back to an online mode such as 'general'.
3. If that fails - try holding down the power button to turn device off - that sometimes works! But sometimes the keyboard lights simply stay on until the battery goes dead...
4. Remove the battery wait a moment and then re-insert battery. You may then have to enter the time and date. Do check your alarms - during GMT I noticed all my alarms would have incremented by an hour! Not seen this since BST started.

Very strange - or perhaps not that strange but just another issue.... I tried the Hard Reset code again at this time it worked!!! I'm now re-entering my details and remembering what I didn't back up But if it fixes my issues it will be worth it.
FYI from another fine post I found:
FOR SOFT-RESET:
- at Standby Screen type-in => *#7780#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR HARD-RESET:
- at Standby Screen type-in => *#7370#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR FLASHING- TOTAL RESTORE: (Do this if your phone does not boot up)
1) Remove the battery, and then wait for about 20 min or so before putting it back
2) Press and hold these three keys together -Green dial key, Star key[*], Three key [3]
3) switch ON the phone.
4) Do not let go the three keys until you see the WELCOME screen displayed and just let it complete the boot process
if this doesnt help contact Nokia Care Point-> http://europe.nokia.com/A4388379

Exchange 2013 Site Resilience - Basic questions for setup in two seperate AD Sites, same domain

I am just getting ramped up with Exchange 2013 and have a friend that I am assisting with planning an exchange 2013 deployment for. I am not asking for step by step directions for setup, just asking for a basic overview so I can dig in to this and
assist.
Goal is to have an exchange server, one in NC and one in Switzerland in an active/passive mode for site resilience. Both servers will be multi role servers.
This is a small organization, less than 50 users and on a budget for equipment. HQ is in NC and the server will have all roles installed on a single server. Switzerland will have only one Exchange server for fail over. There is only
one domain total with two AD Sites.
My questions for clarity -
1. Can I create a Site resilient deployment with two Exchange Multi Role servers in these locations?
2. Currently, the organization does not have a Load Balancer. Will this be required?
3. They do not have a third location for a Witness Server, what issues could potentially happen if the witness sits in one of the two sites?
4. Any other basics for this design are much appreciated. I am reading a lot, however a little confused as I read through the requirements.
Thanks for your input and direction!
Wall

Hi
Please find below answers to your questions.
1. Can I create a Site resilient deployment with two Exchange Multi Role servers in these locations?
Yes
2. Currently, the organization does not have a Load Balancer. Will this be required?
No you don't need to have a load balancer. As you are setting up the infrastructure in Active / Passive mode you don't need a dedicated LB for this.
3. They do not have a third location for a Witness Server, what issues could potentially happen if the witness sits in one of the two sites?
The issue with the witness server in primary or DR site is if your witness server is not responding your DAG won't work properly (failover). If you don't have a 3rd site then you can setup a witness server in your primary site and Alternate witness server
to your DR site.
4. Any other basics for this design are much appreciated. I am reading a lot, however a little confused as I read through the requirements.
I would recommend to use Exchange sizing calculator and technet is the best resource for you :)
Kindly mark this as answer if it fulfill your requirements. :)
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

http://www.apple.com/support/itunes/contact/

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?

Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact

I can't reterive sequerity question for my apple id

i can't reterive sequerity questions for my apple id
<Email Edited by Host>

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97539)

ADSL2+ question for Mods

Similar Messages

Maybe you are looking for