I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Final Cut Pro 10.0.8
I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                     
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
You can redownload most iTunes purchases by:        
  Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

  • Same question for the "2 iPhones in one account".....How do I change the name.  My iPhone is showing my wife's iPhone name when I am syncing it.  Why is that?  I know about using one iTunes account....But how do you change the name w/o erasing your data?

    Hi....How do you change the name?  When I sync my iPhone, it shows my wife's name on it?

    Unfortunately it is not doing it....
    Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
    Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update. 

  • I repeatedly get "error during rendering/encoding of menus/slideshow" message.  This process is the same on my iMac, MacBook and another iMac.  I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

    I keep getting "error during rendering/encoding of menus/slideshows" message.  I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old.  Obviously I'm using iDVD.  I purchased an iMac about a year ago and moved to use this for dvd burning without problem.  A few months ago (approximately) I started to experience problems with burning with the error message above.  I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD.  Still the same message came up.  I lost count of how many times I repeated the process with different clips and variations and the same thing happened.  This was also the case with my MacBook and my husband's iMac.
    After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened.  They told me it must be the process that I am using that is incorrect!
    I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had.  The same message came up so they tried using my clips in one of their mac's.  The same message. They tried it with different clips and the same message.  The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page. 
    I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work!  It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion.  I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy.  It was mentioned that an up-date may have caused the problem on all my macs.
    I feel that this issue should be addressed by Apple as a matter of correctness.
    I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems.  Please Apple, keep/regain your good name and sort this out.
    Jayne Connelly

    Thanks Bengt W for your attention to this matter.  So much appreciated.  And thanks for putting me right on the aim of forums (new to this).  Although, you may regret asking for more information.  I've added everything I can below.
    The process I used is as follows:
    Import recorded clips of between 5 and 15minutes each from my video recorder into i
    Edit the clips (remove unwanted start and endng)
    Add title to front of clips
    ‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
    Open iDVD and ‘create new project’
    Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
    Add 2 submenus for each group of clips
    Select submenu  - drag and drop between 3 – 6 clips in each of the twosubmenus
    Change title colours on clips
    Dragand drop image into drop zones where required
    In‘map’ view I check for any yellow warnings before burning to disc
    In an attempt to remedy the problems I’ve tried the following:
    Try new DVD discs
    Try different themes (favourites and standardones)
    Change images in drop zones
    Start whole process again even from importingfrom camera again
    Two other completely different computers (iMacand MacBook) with iDVD
    Go to apple shop and use their computers to doin iDVD
    Try with one clip and no menu pages added
    Use a clip that I already have that did notoriginate from my camera
    Turn computer off and restart
    New hard drive
    New optical lense (thing)
    New DVD burner
    Saving to disc image rather than dvd disc
    Other points:
    I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
    For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across.  I used a theme that I've used before which has failed and added one sub menu page where the clip went.  It burned to disc image successfully.
    The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this.  That could have been an issue before (I didn’t check it) butnot now.
    Other technical stuff that I don't understand but you may:
    I have…… Mac OS X Version 10.6.7 with all updates onit.  Processor 2.8 GHz Intel Corei7.  Memory 4GB 1067 MHz DDR3.
    iDVD version 7.1.1
    HardwareOverview:
      Model Name: iMac
      Model Identifier: iMac11,1
      Processor Name: Intel Core i7
      Processor Speed: 2.8 GHz
      Number Of Processors: 1
      Total Number Of Cores: 4
      L2 Cache (per core): 256 KB
      L3 Cache: 8 MB
      Memory: 4GB
      Processor Interconnect Speed: 4.8 GT/s
      Boot ROM Version: IM111.0034.B02
    SMC Version (system):            1.54f36
    OPTIARCDVD RW AD-5680H:
      Firmware Revision:     3AHB
      Interconnect:    ATAPI
      Burn Support:   Yes (AppleShipping Drive)
      Cache:    2048KB
      Reads DVD:    Yes
      CD-Write: -R, -RW
      DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
      Write Strategies:  CD-TAO,CD-SAO, CD-Raw, DVD-DAO
      Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
    If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement). 
    Eagerly awaiting your reply.
    Jayne

  • My account asks me to change my password every week for no reason and i have different security questions for the same account

    My account asks me to change my password every week for no reason and i have different security questions for the same account

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Try changing the security on the router. Start with no securty as a test.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud

    I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?

    So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro.  Results were reproduced.  The verdict is:
    - complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
    - different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
    - using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
    - adding an Acrobat watermark to the file cuts the file size roughly in half.
    - just using Save As to another filename has no effect on file size.
    - generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
    - generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
    It appears that Acrobat 9's manner of adding links is what's bloating  the files, and in my case it's probably not related to images or image resolution/print quality.  It's a shame, because Acrobat 9 seems to have made some  improvements to the Review Tracker interface, and a few other bells and  whistles which I haven't really gotten around to exporing yet.  But  unless I find a way to keep my links and the PDF file sizes comparable to what I was  getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8.

  • HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

    can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

    Please Rephrase your query.

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • Exporting transparent pages for the iPad

    Confusing.
    Baffled.
    So bear with me as I attempt to explain what I'm so earnestly trying to figure out is even possible; and if so, how to do it..
    I'm attempting to export an epub for the iPad that contains images [without a background] from Photoshop. In Photoshop, the layers build on top of one another. (Think of physical transparencies printed out with different images and as they stack on top of one another they build a conglomerate image)
    So in theory, I want to export these pages from InDesign as transparencies, that when the page is turned on the iPad, you can see through it as the images stack on top of one another.
    It seems confusing to me because of the front and back of each page in InDesign.. It's like dealing with two pages instead of one. For example, in a facing pages layout, if I had an image on the 3rd page [lets imagine that's on the right in the layout], would the 4th page [on the left] be showing the transparent side of the 3rd page? I just want it to be read as a literal transparent page [the 3rd and 4th page conglomerate] that you can see through to the 5th.
    Is this possible? Do I need to set a certain transparency option in InDesign when I export?
    Or is this just not feasible..
    Please help.
    I'm lost.
    Thank you

    You're saying you want your epub to look as if it's printed on transparent acetate? I don't do epub, myself, but I don't think that's going to happen.If it were possible, you'd have to specify an opaque page (the equivalent of a piece of white paper) for all "normal" pages to keep them readable, and that's just something ID is not set up to do.
    ID simply doesn't care what sort of stock you print on. What is on the page is what will output to the medium on which your doc is printed (ID is first and foremost an application designed to make layouts for print). Nothing is genreated in terms of background other than what you yourself might add. A PDF is theoretically has no additional white background, but Acrobat displays one so your desktop doesn't show through. I imagine the same thing happens with epub readers. If no background is specified, the reader provides something.

  • Materialldgr HardCurrency error for same material for the sameperiod

    Hi
    In Materilal ledger , if we check the valuation of the same material for the same period in USD (Hard Currency), there is not any receipt
    Problem description
    The valuation of the material XYZ123 in the MEC of May 2009 resulted in an increase from a cost of 28.21 MXN to a cost of 646.46 MXN
    The main reason for this increase was the reception from lower levels of a cost of 1,721,192.24 MXN
    Afterwards on June, we have a similar amount for 1,632,170.67 MXN
    But if we check the valuation of the same material for the same period in USD, there is not any receipt
    So there is not an increase in hard currency price.  Could you please explain to us where are these amounts coming from and why do they appear only in local currency and not in hard currency?
    What could be the reason in Material Ledger.
    Thanks & Regards
    Malakondareddy

    Hello friend,
                      i feel that u want to send the material to the supplier of that equipment for sum work,
    then it would b better that u maintain the supplier model no. or manufacturing part no. which u can give in the detail.
    it would be better to give the manufacturer part no. The manufacturer can more easil track the part by giving the manufacturer part no, rather then giving your own SAP No.
    and regarding the SUB-Equipment and its part no. there is no standard functionality.
    Regards,
    yk
    Edited by: 1234_abcd on Apr 1, 2010 5:27 PM

  • I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

    I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • I have a question for the Adobe customer service dept., not for the "community" as a whole!

    I have a question for the Adobe Customer Serice Dept., not the "community" as a whole. And I expect an answer! I want to know why I am expected to sign up for another service package when I just paid $25+ yesterday to be able to convert files back and forth from a PDF to a Word file and then back to a PDF. What kind of rip-off is this?

    Hi,
    I am very sorry that you had unpleasant experiences with our customer service.
    If you would like to export your PDF files to MS Word files then ExportPDF tool will do the job.
    If you would like to convert MS Word files to PDF then ConvertPDF tool will the the job.
    If you would like to export your PDF files to Word file then convert the Word files back to PDF then PDF Pack service is required which includes ExportPDF/Convert to PDF/Combine Files tools.
    Please let me know if you have any questions/issues.
    Thank you.
    Hisami

  • If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?

    If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?

    If a new SIM is activated on the same account for the same number, any existing SIMs for that number are deactivated.
    Why exactly would you care if the SIM in the missing device still works or not?

  • I want to store my mac before I go south for the winter. I don't want to lose my info. Can I remove battery and not lose anything?

    I want to store my mac before I go south for the winter. I don't want to lose my info. Can I remove battery and not lose anything?

    Yes. Your data are stored in your hard drive, and the battery is not required for the hard drive to keep its data.
    However, you may want to google for information about how to store a battery for an extended period - "winter" is a long time, and batteries do run down when left sitting on a shelf.

  • How to  Export/Import "report for the query" to another company

    Hello,
    I do this:
    1.create query in SQL analizer
    2.copy paste into SBO query generator and save
    3.create report for the query
    Then, How to Export/Import "report for the query" to another company ?
    Thanks for your HELP.

    Look for SAP Note number 600813
    That's the note Adele means, I guess.
    <b>Edit (@13:18)</b>
    The direct link:
    https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
    ---- Replace *SOURCE* with the source database name.
    ---- Replace *DEST* with the destination database name.
    insert into [*DEST*].[dbo].[RDOC]
    select [*SOURCE*].[dbo].[RDOC].*
    from
    [*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
    where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    insert into [*DEST*].[dbo].[RITM]
    select [*SOURCE*].[dbo].[RITM].*
    from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    Hope it helps...
    Grtz, Rowdy

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

Maybe you are looking for