Advance Procurement through Sale Order

Dear All,
I required detail infromation pertaining to advance procurement of ROH items against sale order. If manual Purchase requisitions are being created by assigning sale order as account assignment, exception-20 is coming. I also like to inform project system is n't used. Your earliest reply is highly appreciable.
Thank you in advance.
Best Regards,
Ranjan

Dear Biplap,
Exception Message 20 is Cancel process, meaning the system is directing the relevant person to delete the requirement in order to avoid excess inventory.
This is bound to come, since u have not run MRP but you are manually procuring the material. This need not be a point of concern as long as u are aware that the material and qty in consideration is what u require. Once u run the mrp at a later date, the exception message will change based on the planning results.
The exceptional messages will not stop you in any of your transaction but it is only a message for the MRP controller to take corrective action, if need be.
reg
Kiki
Award points if this helps.

Similar Messages

Trading procurement through sales order

Dear Experts
I need your help to configure the below scenario
My client is a stockist,
Suppose he has a stock of X material say 100 units, and he recieves a order for 120 units of
X material,
In this case a normal sales order will confirm 100 Qty and pass a requirement of 20 units to MD04
however my client doesnt manufacture anything, They just buy from vendor and sell it across.
I need your suggestions to configure the above scenario
1. How do i pass the requirement for Procurement to MM?
2. In this case how would the schedule lines will be calculated?
3. In case i dont want to generate a sales order Specific stock, how would the requirement be passed?
Please revert......
Regards
Sudhir

Dear, MRP planning is not only for production, but also for external procurement (purchasing).
Your scenario is a standard MTS scenario.
It can be implemented with MRP if you don't want sales order specific purchasing.

Third Party Process (PR through Sales Order)

Hi all,
I have to configure the third party scenario (PR through Sales order) for one of my client.
So can anybody tell me what are all pre-requisite / settings from the configuration point of view as well as from the transaction point of view.
Thanks
Shubham

Hi,
here is some stuff regarding third party purchasing,
may be it will use ful,
u2022     The item category group (BANS) in the sales:sales org.data screen of the material master controls whether or not the material will always be a third party material. In this case, the item category in the sales order will be defaulted to u201CTAS.u201D   If the material is also procured internally, then the item category group can be set to u201CNORM,u201D and the material can still be used for third-party processing if desired.
u2022     The item category in the sales order (TAS) informs the system that      procurement data must be maintained for the order. In addition, this item category results in a purchase requisition being automatically created with its item   category defaulted (S).
u2022     The purchase requisition is created as a result of a sales order. For each schedule line (quantities for sales orders broken up by dates of delivery), a purchase requisition item is created, provided that the item category on the
sales order is u201CTASu201D for third-party. The purchase requisitions created can
be viewed and even edited from the schedule line screen (Edit-
Procurement Details).
u2022     Changes in quantities, dates and account assignments in the purchase order result in the automatic changing of the sales order.
u2022     A desired vendor (informational field) can be specified in the sales order in the procurement data for the order. In addition, a fixed vendor may be assigned in this data if known at the time of the sales order. This then becomes the supplier for the third-party items. If the vendor is not specified in the sales order, the purchase requisition goes through the normal source determination.
u2022     The account assignment in the purchase requisition can be either the sales order (C), or aux. account assignments (X).
u2022     Once created, the third-party purchase requisition follows normal
purchasing procedures.
u2022     Customer delivery information is copied onto the purchase requisition from the sales procurement data.
u2022     If you create delivery schedules or change quantities during the purchasing process, these automatically get copied back to the schedule lines on the
sales order.
The goods receipt indicator can be found in the purchase requisition which can be edited from the sales order (Click on Item line- Hit Schedule Lines button -Hit Purchase Requisition Button). This indicator determines whether or not the customeru2019s goods receipts are monitored. When the indicator is off, invoice verification is done against the purchase order quantity, and the delivery of goods to the customer is not input into the system
chenna
Edited by: lakshmi reddy on Oct 6, 2010 2:23 PM

Service Order Creation through Sales Order...

Hello,
I got one requirement it is , we need to copy the account assignment (WBS element ) from sales order line item to service order line item . Morever same wbs element should be used to create automatic settlement rule in service order.
This should also work even if user changes the WBS element later. i.e, updated WBS element should again update service order and settlement rule automatically.
I tried to use Exit MV45AFZB and routine USEREXIT_MOVE_FIELD_TO_COBL, but still i am not able to see the data in service order Location tab, Object tab.
I checked the table ILOA, its not getting updated when creating Service order via sales order.
I am not able to see any fields value coming on Service order screen when creating through sales order.
Regards,
Sujeet Mishra

Hi ARC,
Here the issue is that, Sales Order is getting created but while sending the Order num. to Webpage through web service then rasing below Exception.
Runtime Error UNCAUGHT_EXCEPTION
Except. CX_SOAP_CORE
Date and Time 07.05.2008 20:13:24
ShrtText
An exception that could not be caught occurred.
What happened?
The exception 'CX_SOAP_CORE' was raised but was not caught at any stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_SOAP_TRANSPORT_EXTENSN_ROOTCP', had to
be terminated

Advance payment against Sales order

Dear SAP consultants,
A customer pays multiple advances against a sales order.
The advances can be in different modes of payments (credit cards, cash , Check etc).
The requirement is that,
1. These advances should be captured in Sales order, the document should show the flow of advances as well (Sale order document flow).
2. Modes of payment should be captured
3. FI document should be created and cleared
4. Net order value of the sales order should be reduced as and when advance recieved.
5. Pls note that there is no fixed amount that should be paid by the customer (No billing plan)
Thanks again.
Suitable answer willl be rewarded with good points.
Reagrds,
Sandeep Kulkarni.

Sandeep,
In SD, we have the functionality of downpayments.
Here when sales order is created, particular part of the money is paid in advance.
Simultaneously, there will a posting creating manually in FI side for this money in some Special Purpose GL accounts ( indicating this sales order) meant for downpayment purpose and it is not posted as revenue.
Like this there will be various such advance payments.
Once the materials are delivered and invoiced, the advance payments will be converted into Revenue in Finance towards this sales order.
You can ask somebody about this downpayments and make your own customisation to suit to ur reqmt of showing the payments made and the payment mode in saels order itself.
You can check this link to know the process and the configuration better
http://help.sap.com/bp_blv1600/V5600/BL_DE/html/index.htm
Here click teh link "Sales order processing with Customer downpayment" and then read the entire stuff
Hope this helps.
You can reward if this helps

Results analysis data is calculated through sales order

Hi All,
I m trying to calculate WIP of one process Order through KKAX. But I am getting the below error
Results analysis data is calculated through sales order 300002423 001000
Message no. KJ112
Diagnosis
The order you selected for WIP calculation or results analysis is assigned to a sales order. A results analysis key was entered for this sales order.
System Response
The system determines results analysis data for orders assigned to sales order items through the results analysis for the sales order.
Procedure
Carry out results analyis on sales order 300002423 001000.
This process Order is related to Sales Order and I have checked the Result Analysis key is attached to Sales Order.
Please help me out in this issue.
Thanks!
Regards,
Vivek

Hi,
I was getting the above error because a RA key was selected ar Sales Order, Now what I have done is I have removed the RA Key from Sales Order, there is already a RA key attached to Process Order. Now When i am calculating KKAX (WIP) I am getting below message
The order is not a WIP element
Message no. KJ148
I have done this because my client is not using KKA3(RA fro Sales Order)
Please help!!!!!!!!!
Thanks!
Regards,
Vivek Srivastava

Auto PO through Sales Order

Hi,
    I am MM Consultant, we could able to generate an auto PR through Sales Order,,, my client wants to generate an auto PO through Sales Order without PR intervention. is it possible? if so how to do it,,
want to know the settings to be done in SD for Auto PO generation w.r.t. Sales Order, plz guide me
regards,
urendra

Hi,,
    the following are the steps i followed:
1. Created my own Sales doc type = ZCHK and assigned numbe range to it
2. Item Category TAS has been selected, Item Category Group TAS1 has been created.
3. for material type HAWA- assigned Item Category Group TAS1
4. Created a material master S1 with Gent item category - TAS
5. Created a Purchase info record for material S1, Vendor 400055, Pur Org -EPD, net price = 100
6. In Assign Item Categories
    Sales Doc type-Item Cat Gr-Usage--Hl item cat--Def it cat- Manual It cat
        ZCHK----
TAS1    -
TAS -
ZSTK
7. Created SO using t_code VA01, SO 4000804 created, and I noticed that a Purchase Requisition was generated,,where as I require to generate a Purchase Order directly without intervention of Purchase Requisition.
    (Usage--- i have not selected & assigned any usage,,, will it make any difference),
    plz help me out,,, its urgent,
regards,
urendra

Settlement rule for SO through sales order

Hi,
In my scenario,service order is being created through sales order.Earlier we used to have default settlement rule for the service order as Profiltability segment.Now we have changed as SD1-Sales document in the settlement profile.
Now If I create service order through sales order,in the service order settlement rule is not getting created and If I gone through IW32,its asking for With Default/Without Default.If I select with default,now its picking up the rule automatically.
why rule is not getting created during creation itself .
I though that in the sales order,first service order is getting created and at that time sales order number is not available and hence settlementy rule is not getting populated.
Is it right?
Regards
KRISHNAN

Hi Pete,
The system status is CRTD MANC NMAT PRC.
People are suggesting that we can able to populate the settlement rule as SDI(Sales document Item) during creation of service order through sales order.(Also adding the point that after creation of sales order only service order is created with details of Sales document number in the order header)
In that case why in my case its not pouplating?
Regards
KRISHNAN

Advance Payment againest sales order

Dear Expert,
The Scenario is like this,
If any customer pay some advance payment against one sales order.
through FI transaction we can do booking as advance payment by F-29 BUT,
how we can handle through sales transactions.????
and in sales flow where we can the that advance amount????

Based on your requirement,
> what setting required w.r.t. Billing plan ??
What kind of billing plan is relevant for your business process
-Milestone (01)
-Periodic (02)
> and which Item category we have to assign to OR
-TAO, for Milestone
- For Periodic (01) assign billing plan 02 in at sales doc type OR.
> and respective copy control for FAZ with item category .
Standard copying control is available for OR - FAZ in Copy Ctrl for Sales to Bill doc (use tcode: VTFA).
> and tell me please what are the transaction flow steps we have to follow in above scenario?
> 1)order---2)delivery---3) invoice (F2) and again from 4) OR --invoice (FAZ)
1) Sales order (va01)
2) Down-payment invoice with ref to sales order(vf01)
3) Delv with ref to Sales order (vl01n)
4) Final invoice with ref delv doc(vf01)
Thanks & Regards
JP

Advance Payments in Sales Order

Hi,
Say, Customer Terms of Payment --> 50% Advance ; 30% Dely; 20% Receipt.
The customer can issue Letter of Credit Also.
Scenario:
Customer PO value / Sales order value : USD 5000/-
Advance to be paid : USD 2500 (50%)
There may be a scenario where the customer shall pay the Advance - USD 1500 by cash & remaining USD 1000 by Letter of Credit.
But, when i create a Sales order for this PO, the Order value shall be USD 5000/- whereas the Letter of Credit shall only be for USD 1000. The system blocks the Sales Order for Financial Document value. This block should not happen as this will cause delay the delivery for no fault from the customer.
Can anyone let me know the SAP standard process for handling Advance payment from Customers.

Hi narain
Your requirement can be fulfilled through down payment configurations
Make the following down payment configurations :
item category group - 0005
item category - TAO
for this TAO item category a billing plan 01 (milestone billing plan -01) will be assigned and its billing relevance should be I which is order related billing .
billing doc type - FAZ
cancellation billing doc type - FAS
maintain a condition type AZWR which is down payment settlement , it has requirement as 2 and calc type as 48 acct key as ERL
Now when you enter a material in line item 10 and go to item data , you can see the billing plan tab.
now go to billing plan tab and enter the start date and enter the dates on which billing has to be done and then in billing request enter 0009 which is for down payment.once u press enter automatically it all the dates get blocked and billing request by default you get as 1 , that you change it to 4 or 5 . 4 is for down payment at value basis and 5 is for down payment at percentage basis. and beside that there will be a billing type .assign billing doc type as FAZ. to all dates
check the copying requirements are there at VTFA as 20 and for item category TAO copying requirements 23 is maintained or not
now do the cycle OR - LF - FAZ (billing doc type)
Regards
Srinath

Credit status change through Sales order - change log

Hi Friends,
I'm currently facing a scenario were it was reported by the client that
credit release is happening automatically.
Brief details :
   Order was created on 4th Of Oct and it was blocked (reaches the VKM1 bucket )
   since the customer reaches the credit limit.The same order on 5th Oct was not in VKM1
   bucket were the status of order in Sales document header states that it's released.
Initial check : (Sales order change log)
1, I've checked the change log on 5th Oct were the field VBUK - CMGST "Overall status of credit checks changed" from B to A.
   (( Status and details below
      A - Credit check was executed and document is OK.
      B - Credit check was exectued and Document is not OK (credit block).
      C - Credit check was executed document not OK, Partial release.
      D- Document released by Sales representative. ))
2, I tried to replicate the order status for block and release, But when I release through VKM1 / VKM3
     the change logs are getting updated with Status - D .(ie from B to D) .
I'm wondering that what could be the reason that causes the system to update in the table - VBUK - CMGST from A to B
or because of what change from the client in the sales document header level could impact this changes.
Note - There is no payment which received from customer on that day.
Please let me know in case if you are getting the clue...
Thanks in Advance..
- Pugal stalin

Hi
A simple credit check, as the name suggests, is very simple in nature. The functionality is limited and considers only open A/R items and open items from special G/L and sales orders for performing the credit checks. When you create/change a sales order that is relevant for a simple credit check, SAP calculates the payer/customeru2019s credit exposure by adding the open A/R balance for the customer, open item balances from the special G/L, and the net sales order value. This credit exposure is then compared against the customer credit limit maintained in the customeru2019s credit master. If the credit exposure is greater than the credit limit, the system sets the credit check status as u201Cfailu201D and shows a warning, generates an error message, or performs a delivery block
Regards from Pakistan

Down payment Posting to G/L account through sales order (va01)

Hello Everyone,
I have a question regarding down payment for a cash type sales order.
When a cash type sales order is created and customer pays some down payment (at header or item level), on saving the sales order a finance document is generated in the background and gets posted to the GL account. this financial document is not the part of document flow of sales order, but it can be checked using transaction FBL3N.( By selecting posting done on a perticular day)
VA01 transaction some where calls t-code F-29 for deposit posting. I have to do some manipulation on the accounting document populated in back ground but i am unable to find the exact location from where this deposit posting is done. while creating a cash sales order and saving a deposit, I debugged the transaction VA01 for more than 3 hours but could not track the creation of deposit accounting document.
Could anyone suggest me a way to find the location from where the deposit posting to accounts is done from sales order? Or any other solution for the stated problem..
I would appricate the help.
Thanks is advance!
Regards,
Vikash.

hi
in the table below your MIRO screen you will see PO Reference on this tab select the item of the PO that you need post for this PO, in the tab G/L account you can make manual post aditional to the PO, also you can in the tab PO reference modify amounts and quantity if you need, but it is not recommended

Can we have Cost of Manufactuirng sent to Projects while Inventory issue of these items to be through Sales Order Shipping. Can we do that?

I want to send the cost of manufactured items to a Project/Task .
Still I want to issue these items from inventory using a Sales Order (Sales Shipping).
Billing shall be from the Project.
Can we do the above cycle?
In another scenario, what if I want to bill from the Sales Order?Dina Rotem@

Hi,
You will have to enable project manufacturing if you want to collect manufacturing cost on a project. Once you create a project, add this project to a project manufacturing organization through a PJM responsibility. Once you associate project and PJM org you will be able to put the PJM organization in the sales order line created on a Project sales order in Oracle OM. Also, mention the project number in that sales order.
Once this sales order is shipped, run the cost collection program and it will bring in the manufacturing costs to project.
Hope it helps
Regards
Kaushal

Delivery Address is greyed out in PRs generated through Sales Orders

Hi Experts,
I have an issue in PR Delivery Address. When I am generating a PR automatically from the sales order with custom Schedule Line Category and Custom Item Category, the PR is generated with a particular Doct Type and AAC, as per the settings in VOV6. But when I go to ME52N, the delivery address is greyed out and I am not able to change the same. When I am converting the PR to PO, there I am able to change the delivery address. But my requirement is to change it at PR level itself.
Is there any setting to make the Delivery Address as Edit mode?
Thanks in advance.
Hari Raj

Hi,
Since the 4.6 releases, there is a design change about the address
processing for third-party orders in reference to SD-orders.
System is working correctly, it is designed this way.
The reason for this behaviour is to prevent any possible inconsistency
between MM and SD applicable applications. Changing the address must
take place in the sales order.
The way to change the delivery address in a PR linked to a Sales Order
is to change the Ship-To address in the sales order.

Pop Up of Advance Payment in Sales Order

hi Gurus
Actually i have a query that when i am going to create the sales order the system should pop up the dialouge box indicating the customers's advance payment
And against that advance payment the saes order is created
if thye sales order exceeds that advance payment
the system should gives a pop up of indicating that amt like same in Credit control
bcoz the customer pays in advance the money to the company for the the material which has he ordered
so whats the setting for this
And the Advance payment is variable means it changes daily acording to customer's order
Suitable answers will be rewarded
Regards
Amol gawai
Edited by: AMOL GAWAI on Jun 7, 2008 4:41 PM

Dear Amol,
I think your issue can be addressed by using Credit control area. Please do the following:
a) Define a credit control area for the customer.
b) Maintain credit limit as 1 Rupee T-code - FD32
c) Whenever the customer gives you a advance payment the same shall be entered in the system thru FI route and using the while FI posting in "More Data" the relevant Credit control area should be entered.
d) By doing the above the advance payment received from the customer shall be reflected as "Special Liability" in the Credit control area (FD33). Status Tab in FD32.
e) Now this advance payment will act as the credit limit of the customer. So after this if the Sales order value exceeds this limit the Warning or Error message can be set.
Hope the above works for you.
REWARD if it helps you!!
Regards,
Ajinkya

Advance Procurement through Sale Order

Similar Messages

Maybe you are looking for