Advance tax

Hi
In tcode OBCL i have entered A1 for input tax and V1 for output tax againest to the company code.
in the report S_ALR_87012357 i am able to see some other tax codes.
Please advise me if there is some config. missing.
regards
prasad

Hi
Esnter in TCode S_ALR_87012357 under further selections / Tax on sales /purchase code in multiple selection arrow enter A1 and V2
Cheers
Srinivas

Similar Messages

  • VAT ultilization through S_ALR__87012357 Advance Tax Return

    Hi,
    In the Indian scenario, we are having input tax code having both ED deductible at 10.30% and VAT Deductible at 5%. The captured ED deductible amount get setoff through J2IUN. But when we try to do VAT utilization through Advance Tax Return Program, we once again gets both ED setoff and VAT setoff as well which is quite wrong. We need to do only Input VAT setoff against output VAT.
    Further, the client wants to do VAT utilization through this program only and not manual JV. Is there any way, we can address this requirement through S_ALR_87012357 ? Appreciate your valuable advice in this regard how you have overcome this and done VAT utilization.
    Regards,
    Ashok Kr. Singh 

    The std SAP report does not have the VAT # - It looks somebody added the VAT info to the report. Please check the config under SPRO.
    Additionally, I think this comes from the Plant and NOT Co Cd.

  • Does SAP ECC6 support advance tax return (rfumsv00)/GST reporting for USA a

    Does SAP ECC6 support advance tax return (rfumsv00)/GST reporting for USA and Canada?

    Hello
    I think it does.
    However please check this
    In some countries, you cannot use the general program for tax returns to create the annual tax return because of specific national reporting requirements. For these countries, SAP delivers additional country-specific programs to meet these reporting requirements.
    For the individual country-specific reports, see the General Ledger menu under Reporting ® Tax Reports.
    The program RFUSVX10 performs the data medium exchange, allowing you to transfer the DME file to a hard drive or diskette. You can find more information on this topic in the program documentation.
    Regards

  • WHAT IS T-CODE FOR ADVANCE TAX RETURN REPORT

    hi MASTERS
    WHAT IS T-CODE FOR
    ADVANCE TAX RETURN REPORT

    Dear,
    Create one special G/L for advance payment to site engineer. For e.g. you have create special G/L T - Advance to site engineer.
    Whenever you make advance payment of Rs. 1000 to site engineer the entry will be - Use transaction F-02
    PK              Account                 Sp G/L          Amount
    29               Vendor a/c                 T                 1000
    50               Cash a/c                                       1000
    When engineer returns Rs. 200. then - Use transaction F-02
    PK              Account                 Sp G/L          Amount
    39               Vendor a/c                 T                 200
    40               Bank a/c                                       200
    It is better if you create your own document type for e.g. ZR - Return of adv payment from engineer so that this transaction will identified very easily.
    Regards,
    Chintan Joshi.

  • Electronic advance tax return - rfumsv00

    electornic advance tax return gives one checkbox to select "electronic return". But how do we find out which countries this is supported for?

    yes you are right.
    Electronic transmission is a  file which is sent accrosss the systems ( SAP as well as non SAP). More you can find in this link why this is safe mode of trasmission of data.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c4/7c34429692b56be10000000a155106/frameset.htm
    Reward points if this helps!!!!!!!!!!111
    Thanks,
    Kamal

  • S_ALR_87012357 Advance Tax on Sales/Purchase - VAT CYCLES

    Hi Viewers,
          Vat Cycles - When executing transaction code S_ALR_87012357, we cannot get achieved results. The entries from the automatic output vat account (2504000) should be transfered to account (2503000) when we use this transaction code. We have gone thru the complete process and still no result.
    Thanks & Regards,
    JSAUG

    Hi
    In "Aternative Tax Payable Account" field give on which GL account the transfer posting has to happen.
    If you want to use a different tax payable account for the transfer posting of the tax on sales/purchases to the one defined in your system configuration, you must enter that account here. The system uses the posting keys configured for the transaction key 'UMS' for the debit and credit postings.  Check which fixed posting keys are allocated to the transaction key 'UMS'
    Hope this will help.
    Rgds
    Vani

  • Form printout for advance tax return (rfumsv00)

    Many countries like for example India have standard government prescribed formats for VAT returns or for service tax returns (like ST3 format) . But from my analysis, i dont find an option in ECC 6- Advnace tax return - rfumsv00 to output the data onto a form. (Only for Germany and Belgium this is possible by selecting the option "prepare printing of forms" under the "posting " tab.). Please tell me if there is any option. I cannot believe that SAP doesnot provide such option for other countries?

    I hope nothing is mentioned like , this is specific to Germany and Belgium.
    If you want you can have the form in your own layout. In "Output lists" area you can create your own variant for each output/input tax line items and balances.
    Based on the layout selected you will get the output print form.
    VVR

  • Wrong Vat registration number in S_ALR_87012357- Advance tax return

    Hi All,
    When we run the report S_ALR_87012357, the Vat registration number of the customer is appearing as wrong. It is picking up the Vat registration number of the company code, instead of the one maintained in the customer master data.
    Can somebody please help me with this?
    Regards,
    Abhishek

    The std SAP report does not have the VAT # - It looks somebody added the VAT info to the report. Please check the config under SPRO.
    Additionally, I think this comes from the Plant and NOT Co Cd.

  • What is the result of using the "post tax payable" option in the advance ta

    what is the result of using the "post tax payable" option in the advance tax report - program rfumsv00? I know it will then post the input and output tax to the tax payable GL account. But from point of view of reporting, when you run the advance tax report, will there be any change after doing this posting to tax payable account?

    Basic communication aside, J2EE is mostly a synchronous run-time environment. When asynchrony is introduced, a whole new set of infrastructure requirements is needed to support QoS and commercial-quality implementations. In other words, it's not just about API anymore, it's about reliable communication, exception handling, time outs, etc. You may want to look at this Q&A to see some of the benefits provided by J2EE as underlying run-time for orchestration:
    http://searchwebservices.techtarget.com/ateQuestionNResponse/0,289625,sid26_cid511195_tax292928,00.html
    Doron\
    Download Collaxa 2.0
    http://www.collaxa.com

  • Advance input tax

    Dear All,
      In the Advance tax report for input tax, (S_ALR_87012357), in case of LST, the base amount,  input tax amount and  gross amount is not coming properly. The VAT amount is coming in the base amt column, Surcharge in tax amount and total of vat and surcharge and input tax is coming as gross amount. Eg:-
    GR/IR -Rs 14000 and
    VAT-Rs56 (4%) and
    surcharge- Rs2.8.
    The Base amt is coming as Rs56 , Input tax amount as 58.8 and  gross amount as Rs104.8( Rs56+Rs58.8).
    But in the same report CSt is coming  report is displaying the correct amount.
    Please suggest.

    Hi,
    Depending on the type of taxes, there could be some configuration associated with that report.
    See the help at
    http://help.sap.com/saphelp_40b/helpdata/fr/88/8a7415dc4ad111950d0060b03c6b76/content.htm
    Thanks,
    Tammy

  • Company code  is not set up for electronic tax return

    hi dear
                what is the configuration of e-return salea/purchase .
    The system cannot execute the taxes on sales/purchases settlement within electronic communication with authorities.
    when i excute F.12 then message coming  Company code  is not set up for electronic tax return
    please guide me.
    regards
    purushottam
    Regards

    Hi,
    if you start report via SE38. program name RFUMSV00 you can read the program documentation. In here it states what is needed:
    ...In addition, the report provides data for the electronic advance return
    for tax on sales/purchases. The administration report for electronic tax
    returns (FOT_B2A_ADMIN) then directly sends the return to your relevant
    tax authority.
    To use the electronic advance return for tax on sales/purchases, make
    the necessary settings in the screen area Posting Parameters under
    Electronic Advance Tax Return.
    For more information, see the SAP Library under Financials -> Financial
    Accounting (FI) -> Financial Accounting  General Topics -> Taxes
    (FI-AP/AR) -> Taxes on Sales/Purchases, Sales Taxes, and Additional
    Taxes -> Electronic Advance Return for Tax on Sales/Purchases.
    Hope this gives you a beginning.
    Hein

  • Unable to calculate required tax using compounding tax codes in a tax group

    Dear All,
    My requirement for an ordered item (Sale order/Invoice) is to apply VAT on "discounted price" and then apply advance tax on "sum of List price and VAT calculated before".
    Example:
    List Price=100;
    Net selling Price after 10% disount=90;
    VAT Rate:16%;
    Adv. Tax Rate: 0.5%
    I have performed following steps for this:
    Separate tax codes made for these taxes For VAT-used taxable basis="after discount", whereas for Adv.tax="before discount",
    and then assigned these codes to a tax group to be applied to the oredered item.
    But system is not calcuating adv. tax as per my requirement and rather applying rate on "sum of discounrted price and VAT calculated before".
    Kindly provide the workaround for this.
    Regards,

    Dear All,
    My requirement for an ordered item (Sale order/Invoice) is to apply VAT on "discounted price" and then apply advance tax on "sum of List price and VAT calculated before".
    Example:
    List Price=100;
    Net selling Price after 10% disount=90;
    VAT Rate:16%;
    Adv. Tax Rate: 0.5%
    I have performed following steps for this:
    Separate tax codes made for these taxes For VAT-used taxable basis="after discount", whereas for Adv.tax="before discount",
    and then assigned these codes to a tax group to be applied to the oredered item.
    But system is not calcuating adv. tax as per my requirement and rather applying rate on "sum of discounrted price and VAT calculated before".
    Kindly provide the workaround for this.
    Regards,

  • ELECTRONIC SIGNATURE DEVICE FOR TAX AUTHORITIES (TAX REGISTERS)

    Many countries today have special laws in place that make it obligatory for anyone who is selling goods or services to consumers to use approved by the tax authorities cash registers that have special security features that enable the authorities to check in a reliable way the totals of tax that the retailer has to pay
    We have in the last five years been on individual PC assigned ESDs that are independently tagged to each invoicing PC. We are seeking any SAP run organisation that has a Server Solution of this item. We are on SAP 4.6C, ORACLE database &  operating system HP-UX.
    Is there really a server solution for this item?

    Hi,
    if you start report via SE38. program name RFUMSV00 you can read the program documentation. In here it states what is needed:
    ...In addition, the report provides data for the electronic advance return
    for tax on sales/purchases. The administration report for electronic tax
    returns (FOT_B2A_ADMIN) then directly sends the return to your relevant
    tax authority.
    To use the electronic advance return for tax on sales/purchases, make
    the necessary settings in the screen area Posting Parameters under
    Electronic Advance Tax Return.
    For more information, see the SAP Library under Financials -> Financial
    Accounting (FI) -> Financial Accounting  General Topics -> Taxes
    (FI-AP/AR) -> Taxes on Sales/Purchases, Sales Taxes, and Additional
    Taxes -> Electronic Advance Return for Tax on Sales/Purchases.
    Hope this gives you a beginning.
    Hein

  • Tax calculation in SD Billing

    Hi all of you,
    We have configured the tax procedure and created the tax codes. Tax codes are working fine in FI module and in MM module. The condition types with access sequence MWST and account keys using in tax procedure, we have taken the same for SD Pricing procedure also.
    Coming to SD Billing, taxes will be calculated based on the condition record where we will assign the tax code since we do not have tax code field in the sales order or invoice. Why SAP has not given the option to select the tax code in Sales Order like Purchase Order? When I am doing condition record for the condition type, system is showing the tax percentage based on the given tax code but the condition is not picking the condition record while creating the sales order.
    Typically tax code consists of -
    Condition type - 1111 - Tax code - S1 - 10% (Service tax)
                              2222 - Tax code - S1 - 2%  (Education cess)
                              3333 - Tax code - S1 - 1% (Secondary Ed cess)
    In the above scenario, how do I do the condition record?
    And what about the advance tax return report? Will system show the line items per tax code or not?
    Please help me regarding
    Thanks
    Ramki

    Tax in SD will be determined based on several parameters.  But SAP defalts Region of the delivering plant and Region of the Ship To Party.
    In your sale order, if the tax code is not flowing, then you need to check whether for this combination, you have maintained the tax code in VK12 for condition type MWST.
    thanks
    G. Lakshmipathi

  • Sap treasury withholding tax

    Hi,
    When  i am trying to create TM01 - fixed deposit creation (nominal interest) - withholding tax is generated
    When  doing compound interest creation - no withholding tax is not generated?
    What is the reason?
    Any config changes need ?
    TDS entries:
    On Maturity or End of Financial Year, Whichever comes earlier.
    Maturity
    Bank Account                                                 DR
    TDS on Interest/Advance Tax & Interest       DR
    FDR Account                                                 CR
    Interest receivables Account               CR 

    Krishna, check configuration here: SPRO -> Financial Supply Chain Management -> Treasury and Risk Management -> Transaction Manager -> Money Market -> Transaction Management -> Flow Types -> Derived Flows -> ...
    Detailed description here: SAP Treasury - How to create taxes for Issuer
    P.S. When you use compound interest - the original flow is being changed from 1200 Nominal interest to 1150 Interest capitalization. So, here tr. SM34 -> VC_TR_DERFLOWS_5 you have to add new original flow + your tax flow.

Maybe you are looking for