ADVICE & GUIDANCE NEEDED.

Hi Gurus,
How can i print an old Payment run without remittance advices going out by email.
The Print Job stays in spool for a limited time and cannot be accessed after that time.
Also when i have printer problems and the advices are not priniting, i have to pick the job up and print again, remittance advices go out again to vendors by email.
Appreciate your advice and guidance on this.
Regards,
Baltha.

Hi,
The email triggering is happening from FIBF transaction code configuration. You must have selected process 00002040 for application and application area FI-FI with your Function Module (Standard is SAMPLE_PROCESS_00002040).
You should check the logic incorporate in your Function Module with ABAPer. Unless there is a restriction in the Function Module to stop sending emails if rerun, otherwise I do not think it is possible.
Please recheck the logic incorporate in the Function Module used.
If you remove the entries from FIBF, then it will not trigger any email, any number of times you can take spooled copies. But, you will loose the valid functionality like triggering of email.
Regards,
Ravi

Similar Messages

Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.

Hello Adviser /expert,
Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.
As now i m thinking to do SAP-PM certified course from authorized SAP partner in India that to Pune.
So any one can suggest authorized SAP partner in India that to Pune.
My introduction (About myself): - I had done my Diploma in Mechanical and had total 09 years of experience in Mechanical Maintenance field that to in different manufacturing company such as Steel, Auto Ancillary & Cotton plant.
Whether its right decision to change my career from Core sector to SAP-PM..??
Is there very good scope in SAP-Pm for me after 09 years of Core Maintenance field..???
Guide me
Warm Regard
Ravin

Ravindra,
SAP PM is very niche Module, very in demand module, at the same time, being niche, getting into it and getting 1 implementation is also difficult.
your decision of joining SAP authorized training is the best option, as a certified consultant, you have more chances to get a break as fresher and you can continue working on it, else it would waste of your intellectual energy.
you just search sap.com training or email them or chat with them, they will give u the training center details,
but very less training classes are available. Try you will get lucky soon

TS3274 Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

- First try clciking the Home button one and try again.
- Next reset the iPod. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then restore from backup
- Restore to factory defaults/new iPod

Guidance needed on quoting third party advice

I occasionally quote good advice on updating etc from articles on the MacFixit website, but have sometimes forgotten to mention the source - although I have never claimed personal authorship.
(MacFixit articles don't stay up for long, and can be worth preserving.)
Today a (new) poster has complained about me doing this and, as far as me not mentioning the source goes (which I will do in future), has a point.
Whilst I object to somebody actually calling me a thief, which seems a bit OTT, I would not like to break any rules here.
So, what are rules about quoting technical advice from third parties?

Hi Klaus1,
An interesting point.
However I think we need to look at a longer view.
For instance it was the regular posters in iChat 2.x as it is now found that iChat would not work if Helvetica Font was not active. (See here from my original 2004 pages)
This has since become an Apple Doc
http://docs.info.apple.com/article.html?artnum=300501
This Doc also used to say that Lucida Grande was also needed (This effects the Status Message display) but this has been edited out as it does not effect the application launch.
At a certain point info like this passes into General Knowledge about an item
A Google for "Helvetica iChat" shows several source including page 17 of the EZ Jim's (Now defunct) blog that is now part of my site
EZ Jim is one of the regular posters in iChat and iSight.
It's at what point the info becomes common knowledge.
I think posting credit for something that seems fairly new is Ok.
The example I have posted about has been worked on by several people in several forums where it is obvious that there has been some re-inventing of the wheel and also cross pollination but it would be difficult to pinpoint when and where.
10:47 PM Saturday; April 28, 2007

Need advice/guidance on how to export .FLV videos for my website.

Can anyone help me?
I am trying to embbed a .swf/.flv video into my website,
using dreamweaver and flash cs4. But when i do so, and i load the
video, the .FLV playback componet wont load or the browser dosent
even try to load the data at all, it just plays the video. So users
cant mute, have volum control, pause, stop or anything. Can someone
please help me? i looked all over the net for 2 days and cant find
a single turtorial or anything. I know alot of website use .FLV but
how? and how do you export it?

You need three parts for the flv playback: the swf, the flv,
and the video player skin swf. If you create the flv from your
Flash movie by importing the original video, Flash should make all
of those parts for you. Upload each of these files to your server
and the file should play as expected.
Can you describe in more detail what you are doing that may
be different?

Advice / Help needed on how to tackle this mountain...

First, I've scoured the forums looking for an answer and some clarity, but have come up empty. Any advice or help you can offer will be greatly appreciated...
So I'm trying to tackle the feat of sorting though thousands of MP3s in several different fodlers, and getting them all stored in one folder, with just the ones I want to keep (estimated to be about 3,000 when all said and done). Having iTunes just automatically copy them as I drag and drop is perfect, but I don't want the program to automatically sort them in hundreds of different folders. Is there a way to not completely turn this folder off, but have it just copy into the root folder?
Assuming the answer is no, what's the best way for me to approach this? Right now I've turned off the copy feature, have been adding 100 or so songs into a new playlist, editing the tags in iTunes, and copying into my finish root folder. However, I obviously lose my rating when I move the files, and have to update my library by removing all previous files in library, and adding the root folder again.
A way around this is for me to just not assign a rating to any files until I have my final root folder set for import into iTunes library, but this also raises a conceptual problem: I use other programs for uplaoding songs from CDs and DLing, and have them all sent to an "Unsorted MP3s" folder. I would like to be able to go back to this folder, edit the tags and clean them up, then copy them into the root folder and updating my library without having to remove all and reimport the whole folder, losing all my ratings and playcounts.
So I guess there's really 2 questions I have;
First, is there a way to have iTunes just copy the file into a root folder without automatically sorting and creating folders itself?
If no, what's the best way for me to go about updating, importing, and copying songs into a singular root folder? I realize I could just stay on top of it, and only add a few files at a time individually, but that solution isn't very feasible when I'd like to update and add large numbers at a time.
I gotta imagine there's something I'm missing here and it's possible. I did have the idea of merging ALL of my MP3s into my root folder first, then delete and edit from iTunes, eventually ending with a perfect library and all files in one folder. However, I'm still posed with the problem of how to add files at a later date without losing my whole library...
Hopefully I haven't been too confusing, and I'll be sure to offer more clarity if need be. Thanks in advance for all the help!
-Mike

Im not a 100% sure on what your trying to do, i think and correct me if im wrong but you want to copy all your songs that are scattered all over the pc into one folder in the root but not have itunes consolidate the files into folders by name etc.
Im not sure if this is of any help to you but i had songs scattered all over my pc and wanted to put them in a central folder and then share that folder accross multiple user accounts on the one pc (this could be the root if you wish i just chose shared music) if you follow the following link it explained what i did to put all my music in the one place. (I urge caution though as im not 100% certain if this is what you want to do, anyway hope it help)
http://discussions.apple.com/thread.jspa?threadID=608497&tstart=0

Guidance needed please for architecting a scheduled application process (Worker Role vs. VM Role)

I'm close to putting all of the pieces together for an Azure Cloud Services solution that I want to build.
My goal is to build a .NET Library (or perhaps a Windows Service or even a Console Application) that will run once a day to execute dynamic queries against an Azure SQL DB.
There would be 1-x numbers of these query sets that will need to be run during the process, and after each query set an email will be sent out containing data from the query results (which shouldn't be terribly large or processor intensive) to an email
recipient specific to that data set. I plan on using an assigned Office 365 Mailbox as the sender account and email recipients would all be in the same Exchange organization.
I haven't decided on the emailing API yet, but it may require dependencies to be installed on Windows Server (e.g. the MAPI subsystem, AKA the Mail applet in Control Panel - so I can use Redemption which is a third-party replacement for the Outlook Object
Model that doesn't require Outlook to be installed) unless I go with Exchange Web Services or the Office 365 REST APIs.
So my main question is what's more appropriate, a VM or a Worker Role?
Since the processing should only take 5-10 minutes to complete, I'd like to minimize the uptime of the VM or Worker Role and be able to turn it on when the scheduled time occurs, and turn it off when
the processing is done.
I'm also trying to understand how to fit in either the Azure Scheduler Service or the Windows Task Scheduler in the OS to auto-run my .NET application and/or Worker Role/VM.
Any guidance would be appreciated!
Eric Legault (MVP: Outlook)
Co-author, Microsoft Office 2013 Professional Step-By-Step
Try Outlook Touch!

Hello Eric,
There is currently no Option for automatically deploying an Azure Role, running it and then Shutting it down or Deleting it. That kind of functionality is possible using the
Windows Azure service Management API which is used by the Windows Azure PowerShell cmdlets.
Regards,
Nithin Rathnakar

Pre-newbie help! Computer guidance needed so wanted to ask the pros (you)

Hi all,
I am a jewelry designer - have been for over 25 years (pencil to paper) and want expand my knowledge and learn Illustrator and Photoshop. I want to come out of the dark ages regarding HOW I design to become more efficient AND hopefully increase my marketability. I need a new computer so figured now was a perfect time to ask the experts in this field as to what system would be a good into place to start. Laptop preferred so I can learn wherever I am. I figure by the time I am doing well, it may be time to upgrade. Cost is a factor but I realize I am going to need to invest a little more on the front end to get the proper equipment.
While I am here, where is a good place to start regarding which illustrator to go with.
I thank you in advance for your help.
Jill

I am a designer for a larger Mfg company - not just someone who tinkers in her own studio (although that part is the best). Hand drawings can be scanned in and traced. It is a way to get a more accurate diamond weight and estimated metal weight to determine whether it is what is wanted BEFORE it is given to our CAD team. All of which are imperative to fit within certain price point targets. Details (scroll thickness, wall thickness, prong details, etc) are made much more clear for the CAD operator who may or may not have any design background. It will also allow me to start with one element and take that element to make a pendant. Then copy that exact element to lay out earrings (maybe flip for a left and right). Then copy further to lay our a bracelet....whatever it may be. Any tweaking that I want to do can be more automatic then re-drawing everything in order to compare. .
In addition, computers (illustration, Photoshop and certainly CAD - typically Rhino/Matrix in the US) are mainstream - unlike when I started. Not as many people hand draw so I am lucky in that regard. Certainly not as many people carve and cast wax as they once did to make a model. The CAD is loaded into a 3D printer, cast and voila - a master model.
I may or may not want to move to higher caliber companies as I continue to develop my career. Many of the larger companies I casually have my eye on ALL require Illustrator/Photoshop of their designer. Some actually say that CAD is encouraged but not necessary. Seems backwards to me but.....what do I know//
That's basically it in a nutshell. The schooling I am not really concerned about. I am looking for guidance on a suitable system that I will need at home (because I need a new computer anyway) that would allow me to have what I need eventually loading these systems on and learning what I hope to learn.

Simple game guidance needed

Hi all,
I could use a little guidance with a project I am currently doing at college. We have to use Java / NetBeans 4.0 to create a game where some targets appear and the player gains points by clicking on them. I have created the vast majority of the code and it works reasonably well so far.
The part I need help with is that I would like my targets to move around, probably using threads. Currently my targets are JButtons in a JPanel, but I cannot get them to move. I have tried using setLocation() and setBounds() to no avail. I have tried different layouts such as Null and Absolute, but that didn't make much difference.
So I have been playing around with the idea of using sprites, perhaps.
Does anybody have any suggestions to offer? I have been digging around looking for examples that I can work from that I could perhaps re-work for my own needs, but none of them seems to have what I need. Perhaps someone could mention classes / functions that I ought to be using?

I would use Graphics 2D rather than Swing.I'm no gaming expert but I'm not sure why you would use Graphics2D for this. Sure I guess if you are moving squares or circles around the screen you could do this. But what if you are using actual images, like an image of Duke or Bart Simpson? How would you draw these images using graphics?
I would like my targets to move around, probably using threads.Anyway, for the animation, if you do use images you should use a Swing Timer. Here is a simple example: [http://forums.sun.com/thread.jspa?forumID=57&threadID=631379]

How can I get my credit Score higher? Advice is needed!!!!! Thanks

CN1982 wrote:
Victoria Secret: $ 350 Balance : 0 pd off once statement was availableQuick Silver One CC: $ 500 Balance: 127.00 Fingerhut: $500 Balance ; 0 pd off once statement was available You'll recover some points when you get the Cap One card under $50. I'd suggest adding two more bank cards. Cap One will give you a second account. How old are your accounts?

Update from April, 23, 2015- July 07, 2015 I Still need advice on how to get my credit score higher than what is is curently. What do I need to do? TU: 642EQ: 618EX: 598 Old Scores: April 23, 2015 @ 11:46 EST Current Scores: JULY 7, 2015 MY FICO SCORES TU: 659 was 677 before inquiries were pulled last monthEQ: 637 was 649 before inquiries were pulled last monthEX: 622 was 637 before inquiries were pulled last month

Advice/Help needed migrating/working with two macs

I currently own a mid-2010 (I think) Macbook Pro and a couple of months ago I bought a Mac Mini. Unfortunately when I set up the Mac Mini I was short on time and my excitement/lack of patience got the better of me so I copied everything on the HDD from my MBP over to the Mac Mini and I have been using the same profile to login on both machines.
This causes a few problems, particularly when I'm trying to connect the two machines via a network to share files. They can never connect, I'm thinking probably because they're using the same profile and get confused. I also haven't taken the time to properly install all the applications and so some do not work on the mini.
Rather than trying to pull my hair out trying to solve the issues, I think I've reached a point where I think I need to either start over or get some advice on what to do.
Ideally I'd like to use the Mini mainly for music apps (Garageband, possibly Logic Pro X in the future) and occassional internet and iTunes use. Since it has a bigger HDD, I'd like to store my music on the Mini.
I would then use the MBP as my general internet and iTunes machine. I would however like to be able to use it for music production stuff (again GB and/or Logic) if I am travelling. I know that I will need to upgrade the OS and the RAM which I am happy to do.
I would like to be able to have most of the same apps on both machines and also be able to easily transfer files, music etc. between the two.
So in light of what I'd like to achieve, what would be my best course of action? Would I be best to start over and try to migrate from fresh or can I make something work with what I have?
A further complication is that I have since used both machines so I will have some new stuff saved on both machines that won't be on the other. Is there any way to keep these new files if I start over?
Would anyone be gracious enough to point me in the direction of an easy to follow guide to help me achieve what I want?
Sorry for the long-winded post (and if I've posted in the wrong section) but I really think I lept into the migration without really knowing what I was doing and I could really use some advice to help me work out what to do!

With your project open, press Shift + Q to open System Settings.
Where are your render files being stored to? The path should be pointing to your external. I'm betting that it's set to your system drive instead.

Robocopy with Win 8.1 , guidance needed

In Win8.1Pro 64 bit used the command line:
Robocopy V: F: \ backup /MIR / R:0
The copied directories now take most of the space on an external Lacie HD F: . All the files and directories seem to be hidden though, neither
command line DOS evel nor Windows 8.1 sees anything on the Lacie.
The background , V: is the project file server of an architecture office and F: is a USB external
HD rotated weekly and stored elsewhere for backup. I used to do this with SyncToy on Win XP Pro from 2007 onward but just switched to Win 8.1 and noticed that SyncToy
is not supported . Found Robocopy after some googling .
Took me some trial end error to get the above command line running, had to figure out where to put empty spaces in the command line and where not to .
Would really appreciate if someone knowledgeable could help me write
a command line that mirrors the content of V: to F:\backup
without hiding it . Further , do I need a second
version of the command line to do subsequent runs in a way that only copies new and changed files
and folders to F: ? A full run takes in excess of seven hours.
RolfV

Robocopy is self-documenting. Open a Command Prompt (cmd.exe) then type this command:
robocopy /? > robocopy.txt
You now need to play with the various switches to become familiar with this tool. It's not a scripting (=programming) problem.
Robocopy will sometimes hide the target folder(s). Open Windows Explorer, then change its settings so that hidden files become visible. Again this is not a scripting problem.

Advice desperately needed from Surcode/dolby 5.1 users

Hi all,
I am on the verge of paying the big price ticket to get Surcode unlocked within premiere, but I can't successfully get a file to output with high enough volume.
Here are my settings.
I have tried with dialogue normalisation set to -1, -5, -27 and it makes no difference. I have also set dynamic range compression to off and set all of the mix levels to as close to 0dB as they will go (they're -3dB by default and the same in the above pic)and tried 3dB surround attenuation but all of these things make no difference.
When I drag the AC3 file back into premiere after export, I need to apply 30dB of audio gain to it for it to playback at the same sort of volume I want (and the volume I saw/heard before exporting from premiere).
I have emailed Surcode after hearing good things about their customer service but as yet they have just pointed me towards some generic dolby pdf's which I've read but can't find the problem.
I'm desperate for help as I have an entire project waiting to be exported once I cure this issue!

i didn't realise that was a tutorial to get around using Surcode. To be honest I like the look of surcode and the simplicity of it and I think it's worth the money if it only did it's job.
My problem has now directed me to the mixer page of the premiere window as I think this might be part of the cause.
in this picture each channel has the center dial turned up to full. It was my understanding that this would result in every track coming out 100% in the center channel and not anywhere else. I.e - by putting left rear channel's center dial up to 100% that would result in all of the sound going to the center channel and none into the left rear. Is this incorrect?
I also think that the LFE channel in that pic looks different to mine because of the steps he takes elsewhere in the workflow, but on mine I have the LFE dial on the front left and right and also the center tracks turned to about 30%, which (as is my understanding anyway) means that of the sound in those channels 30% of it is sent to the sub woofer.
I've looked everywhere for a decent tutorial on how to set up your mixer for a 5.1 project but can not find one.
My files are NOT all mono either and I think this might be an issue. I have a mono vocal track but then a stereo wav for music which I pan to front left and rights (I duplicate the track and push one puck to front left and one to front right, but i've also tried putting it in the center channel and leaving the center dial at 0% as this also seems to send the sound to the front left and right equally.)

URGENT HELP/ADVICE/INSIGHT NEEDED RECOVERING FILES!

Hi, all, I hope someone out there can help me understand what I have done and how to fix it! I have posted this under Tiger, but it is probably a hardware question. I have a G4 Quicksilver which I upgraded with 2 hard drives, master/slave set up. I recently had to reinstall the OS (Panther with upgrade Tiger disc) which went smoothly. I cloned the master drive to the slave drive with CCC but did not want to copy it back identically because I was having some problems with Adobe Updater - I decided to uninstall basic 3rd party software and reinstall fresh. In the process, I forgot that Adobe CS2's application Bridge stores documents in a subfolder in User/Library/Application Support/Adobe/Bridge/Collections - so if you uninstall, it apparently eliminates those files. I understand that when you put files in the trash, you can recover if you haven't overwritten files. But what about the Adobe uninstaller? Does it eliminate files in a similar way - just erase? I have also posted to Adobe but have not gotten a response that has helped. Also is there a file recovery software that I can use that is a trial or not very expensive? I need these files for work (reconstruction would be a pain) but have put some money into my computers recently and don't have much of a margin. Thanks! oh JUST TO CLARIFY: The files were on the slave drive and I have not used it except to copy files back to the master.

Thank you - I'll give it a try. I've been making some pretty basic mistakes in backing up, reinstalling recently - I guess too many computers, too many different OS's, etc and being under pressure. I just don't want to make another mistake - so far they have all been correctible. I did not know with Adobe's concern for pirating software if their uninstall app does more than a simple erase - So I guess I would download the app to the master hard drive and recover from there?

Switching iTunes from PC to Mac guidance needed

I'm new to the world of Apple computers with the exception of the iPhone. Just two weeks ago I purchased a new 27" iMac, and now I need to transfer my iTunes music and library from my old WinXP computer.
I plan to locate my music on an external 500GB drive connected via USB 2.0. The library I need to transfer from the WinXP computer currently contains 60,349 mp3 and podcast files in approximately 416GB of space. From what I have learned on my own so far has indicated that I need to format the external drive on the iMac since NTFS will not work properly. I can transfer the files via my LAN.
Almost 70% of my library is rare vinyl and tracks that I manually added the album artwork for. I need to know how to transfer this entire library from the PC to this iMAc so I maintain my album artwork, my playlists, my iPhone apps, and my podcast structure.
Any recommendations for this process, or should I call support to have them help me do this?
Thanks in advance,
Al

ChicagoBubba wrote:
I need to transfer my iTunes music and library from my old WinXP computer.
welcome to the forums !
these reads will be helpful: one, two, and three.
if you have a suitably sized iPod click here.
happy holidays !

ADVICE & GUIDANCE NEEDED.

Similar Messages

Maybe you are looking for