Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.

Hello Adviser /expert,
Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.
As now i m thinking to do SAP-PM certified course from authorized SAP partner in India that to Pune.
So any one can suggest authorized SAP partner in India that to Pune.
My introduction (About myself): - I had done my Diploma in Mechanical and had total 09 years of experience in Mechanical Maintenance field that to in different manufacturing company such as Steel, Auto Ancillary & Cotton plant.
Whether its right decision to change my career from Core sector to SAP-PM..??
Is there very good scope in SAP-Pm for me after 09 years of Core Maintenance field..???
Guide me
Warm Regard
Ravin

Ravindra,
SAP PM is very niche Module, very in demand module, at the same time, being niche, getting into it and getting 1 implementation is also difficult.
your decision of joining SAP authorized training is the best option, as a certified consultant, you have more chances to get a break as fresher and you can continue working on it, else it would waste of your intellectual energy.
you just search sap.com training or email them or chat with them, they will give u the training center details,
but very less training classes are available. Try you will get lucky soon

Similar Messages

Any advice on how to switch to ICloud on my 3g IPhone? I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5. Apple says I have to be running 5 to switch.

Any advice on how to switch to ICloud on my 3g IPhone? I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5. Apple says I have to be running OS5 to switch.

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion
From here > http://www.apple.com/icloud/

Need some help and guidance please!

Hi everyone,
I desperately need some help because I am at my wits end. In September I purchased a Compaq Presario CQ60-450US. Shortly after purchasing, I fresh installed Windows 7 Professional. Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error. I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.
I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie. He/she said that she could see no issue. (no diagnostic was run)I informed the individual that I had issues with buring as well. He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
I called HP support back and told them that I am having an issue now burning. They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP. I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP. I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device. The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor.
That is where I stand. HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware. I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support. Can anyone point me to a reputable division that can help me with my issue? I feel I was just thrown aside so that they don't have to initiate a repair. If not has anyone filed a compalint against this outrageous support requirement?

Dear ndjumpball,
I would like to say that I have some good -- or at least encouraging -- advice. Regretfully, I do not. I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school. My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7. Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit. Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable. I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
I was all excited and happy now that I had a laptop for school that had everything I was looking for: decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay. Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too. It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard. Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment. Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install. In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you. The following is a direct copy/paste quote from an email response I received from HP Total Care: "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not. If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology... Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series. (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working. After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro. After giving the guy my credit card number as security, I had a replacement drive shipped to me.
My personal recommendation: clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install. Bottom line: your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine. You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
I don't know if that helps or not, but thank you for giving me the opportunity to vent! :-)

Pl/sql parameter portlet - need some help/advice - how to create

I want to create a pl/sql portlet that accepts a parameter and on submit passes the parameter to other portlets (sql reports) these are then automatically run to display the new data.
E.g.
parameter portlet = deptno
On submit
Sql reports then refreshed using the parameter
I am aware, and have tried the mycompnay demo, which works exactly as I want but the parameter portlet cannot be amended and is written in Java.
I need a pl/sql equivalent so I can tailor the code.
Any advice examples or guidance would be really appreciated.
Thanks in anticipation.
SD

Hi,
You can use a form portlet to accept parameters and then call a report in the success procedure of the form. In this example it calls a report with the value in the flightno field.
declare
flightno number;
blk varchar2(10) := 'DEFAULT';
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
call('SJDEMO30.report1.show?p_arg_names=flightno&p_arg_values='||
flightno);
end;
Thanks,
Sharmila

Need some help/advice please

Hi,
I am trying to fix a friends computer. She has a MS-6385 m/b but the keyboard does not work. When trying to boot to ME. you just hear clicks when pressing a key.
If I boot from a W98 disk, I get a beep on each keypress. The CPU seems fine as it will load the W98 boot disk OS.
I was going to try a PS2 to USB converter, but the manual implies that the USB keyboard is disabled by default and I cannot get into the the BIOS to change it.
So I am asking for any advice as to how and try to fix this, or should I just bin the m/b and try and get another socket 423 m/b with rambus slots.
TIA

Using my keyboard though a KVM switch, which works fine on my network, so its not the kbd. I reckon the ps2 connection has gone belly up, so I'm stuffed for a fix.
Looks like I will need to get another board, I have found a 6339 board, which I might use or get the Asus P4t board.

Need Real Help & Advice With Replacement MBP Options!

Hi All,
Please kindly give me some advice as I need to act quickly - I already have a MBP 15" 2.4 Unibody replacement agreed by Apple only last week (replacing a Intel 2.2 GB MBP) but I am pretty sure that the Senior Customer Services Person I spoke to was not aware of any due upgrade as he was very helpful and probably genuinely did not know. In view of the new models announced, should I stick with this or ask for the new 2.53 version which is actually cheaper and therefore I am somewhat hopeful they should do (or would they now generally offer me the new one?) Can any of you kind folks also please tell me:
1. What are the advantages/disadvantages between the old 2.4 Unibody MBP & the new 2.53 Unibody MBP?
2. I know the new one comes with an SD card slot and loses the Express Card Slot but is the loss of the latter a big thing? Can the old one with the use of card readers actually shift data from the MBP to a SD card (or any other) via card reader/device? Is Express Card or SD Card Slot more desirable and better utilised?
3. I think the newer one has less better 9400M integrated graphics - is that true and how big a deal is that? (I plan on downloading and watching lots of HD content) Is it better to go for the dual 9400M/9600GT graphics
4. I know the new one can be upgraded to 8GB of Ram which sound really good for future-proofing and general super-smooth running purposes so I guess this feature is really important? I guess it can take 4 x 2GB sticks?
5. Some have stated that they are very happy that the new ones have Firewire back but was that also not on the old 2.4 one?
6. How big/good/bad a thing is it to have a non replaceable battery even though in theory, it may last longer?
7. The new version makes a big deal about the screen - is it a good reason to upgrade or as good as they make out?
8. Are the Hard Drives on these latest versions user-replaceable/upgradable? (250GB is still a little low for my future needs and I was planning to upgrade to a higher capacity).
9. As I am not a savvy as most when it comes to this sort of stuff, is there anything else that I have not considered/should consider or have taken into account and which may prove to be be of significance in the future?
10. Is it safe to assume that the newer model may be better as it may have had bugs or issues the old one may have had ironed out?
11. Because of the better graphics and larger Hard Drive (320GB), I am also inclined to go for the 2.66 model - how should I best proceed if I choose this model - will they likely give me one (or better still, how can I best wangle one!) or is it possible to offer to pay some money to make up for the difference and what would be considered a fair and reasonable amount?
I am very sorry to ask so many questions but I need to act fairly quickly on this one and would be extremely grateful for the help and input!
Many Thanks To All!
SB!

Suave! wrote:
Hi,
Thanks for the help so far - I know the HD is replaceable on the 2.4 MBP but can you confirm that this is also the case with the new 2.53/2.66 MBP's?
Yes. I can confirm that.
Do you have any further thoughts regarding the benefits of the new over the old?
I am a big fan of the unibody MacBook Pros. I had purchased mine in October 2008. I could easily purchase a new one with out a second thought. They are exceptional machines.
OLD - Better Discrete Graphics, Express Card Slot, Replaceable Batteries, Upgradeable HD, Poorer Screen, RAM limited to max 4GB
NEW - Poorer Integrated Graphics, SD Card Slot, Better Screen, Upgradeable RAM to 8GB, Fixed Internal Battery but with Longer Life, Unsure if HD is User-Upgradable
The batteries can be replaced at an Apple Store at any time. The hard drive can be upgraded by the user. The graphics are still very good.
Anything else I might have missed? I would like to choose the one that offers the most future-proofing and will operate the best when running Snow Leopard and Windows, HD Material and will cause least performance issues!
Check out the requirements for Snow Leopard. http://www.apple.com/macosx/specs.html
You cannot go wrong with a unibody MacBook Pro. Leopard runs on Macs that are 10-years old. Whatever your choice, you will be "future proofed".
Good luck!
Message was edited by: LukeD

Need your help, advice, critique-

Hola
I just finished my wife’s site using ONLY CSS !!!, no tables, and this is the first time that I have done that.
Most of the site is CSS, and I only used flash –an audio widget that I love, because it’s so easy to create—in one page. Lots of DIV’s, maybe more than I need, “classes” etc. I also --made—the blog, which was one of the hardest things for me.
Now, I'm asking for your ideas on how I can make it better.
If you have a suggestion, critique, if you find errors (maybe lots of them) ways to improve it, please let me know so I can grow.
This website could not be created without your help. I asked you many times for your help in making this possible, so in a way,
this is OUR WEBSITE.
Here is the link: http://sanctuary4humanity.com/
Thanks a lot to all of you.
Daniel Ulysses

function(){return A.apply(null,[this].concat($A(arguments)))}
Lon Winters wrote:
The only suggestion I would have is to concentrate on SEO if you've not already done so. Run the site through the W3C validator and correct any errors. Create an XML site map and robots.txt file. Submit the site and/or site map to Google, Yahoo and Bing. Use google Webmasters tools to submit the site map and for tracking, and also perhaps Google Analytics.
Hola Lon
What is SEO?
The XML site map and robots.txt file?
I'm on google right now :-)
Need to get on this asap, thanks
Daniel Ulysses

Really really need some help and guidance here as I am going nuts!!

I had a laptop with itunes on it and when I connected my iphone it automatically synced and I could move and transfer music from my library to my iphone and vice versa, so all good.
Anyway, one evening I turned on my laptop to see that my itunes icon had just disappeared - literally! No idea why. When looking in the start menu , I found my itunes music in a folder but no icon/itunes facility - all gone.
I looked up this problem on the apple troubleshooting site, and they showed a series of steps to complete to get the icon back, but this failed.
Since then, I have bought a new laptop, so I thought I would just reinstall itunes again which is what I have just done. However, my iphone will not sync to this itunes and I cannot transfer files from itunes to the iphone and vice versa. It's like they will not connect together and I am so frustrated.
Can anyone help me? Please!!!

Installing iTunes does not cause your media to magically appear.
If you want your media on your new computer, then you must put it there.

Need some helps! - Nano won't switch on....

Just got my new iPod Nano (3rd gen) few days ago. Everything was fine until just now when I try to sync music from iTunes to my nano, it won't switch on! I've tried the "Five Rs" indicated in the troubleshooting pages in Apple website. It still won't switch on. I'm sure it has enough battery, as I was just using it few hours ago.
It would be really kind if anyone can provide a solution before I consult the Apple Store!
Thanks a lot!!
Suky

Welcome to Apple Discussions!
Have you tried the steps listed here:
http://docs.info.apple.com/article.html?artnum=60942
http://docs.info.apple.com/article.html?artnum=60958
Also, have you tried resetting your iPod while it is plugged in to a power source/computer?
http://docs.info.apple.com/article.html?artnum=61705
btabz

Need Audition help / Advice - Audio Noise

I have this project I'm working on and I am new to editing audio in audition. I clearly have a lot of noise in this audio track, but I'm not sure what effects to use or how much to use. The main problem seems to be a constant hiss, but there are other problems. When I use the noise reduction effects it seems to create more problems.

Well, first off, the best advice is to cure the noise at its source before recording. There's almost always a curable cause for noise and hiss and it's much better never to have to use noise reduction.
However, on the assumption that you have a bunch of material you can't redo, there are ways to improve the performance of Audition's noise reduction (which is one of the better ones out there before you spend thousands on specialist stuff).
First, I tend to use "Noise Reduction" rather than Hiss Reduction even if I perceive the problem as hiss.
Second, find a bit of the track you're working on which is just the hiss without any other sound mixed in. You can generally do this by zooming into an area at the beginning or end (or even between words). Hit the Capture Noise Print button.
Then, Select All to work on the whole track.
However, don't try to get rid of all the noise at once or you'll get all sorts of nasty artefacts. Instead, turn down the Noise Reduction slider to a relatively low number, definitely below 50% and preferably in the 30% range. Turn down the "Reduce by" slider as well to maybe something like 10 or 15dB.. Then apply the reduction.
At this point, repeat all of the above. Capture a new noise print then adjust and perform the NR. Basically, you'll get much better results doing the noise reduction in a number (say 3 or 4) small chunks. Make sure you keep the original though (use Save As on the noise reduced copies) in case you go too far or get something wrong.
If you're still not happy with results, try again, raising the FFT size (on the Advanced menu) and varying it between takes.

Powerbook G4 just Died. Need some help & advice!!

Hope there's someone out there that can help me. I was working on my titanium Powerbook G4 and it just shut itself down (no warning sounds etc at all) and won't re-start. There's no sound from it at all. Even the green power cable light has stopped working. But the little glowing white light at the front (on the lid release) is still glowing. I've tried removing the battery and re-starting but to no avail (although with the battery removed the lid release light still works!). It's just dead. No sound at all. Has anybody any ideas what caused this?
Is it a hard drive issue? - I've had hard drives fail before but the machine usually tries to boot up but this PBook is dead. Deceased.
Can someone point me in the right direction?

Hi, Andy. If the sleep light on your Powerbook is in the display latch, the PB is Aluminum, not Titanium. There's another set of forums for the Aluminum models here.
Have you tried resetting the Power Manager?

I need some help/advice about a CS5 invalid Serial Number

I recently purchased a CS5 Master Collection on ebay. Excited to get playing with it, I started to load it right away. When the window popped up asking for the serial number I punched it in and it showed as invalid! I retyped it and again invalid! So I checked the disc and in the notetab text file the serial number there was different than the one I had typed in off of the instruction paper. I typed that number in and the CS5 loaded! HOWEVER, once the CS5 was finished installing and I started up any program the window popped again asking for the serial number! Also on the same window it says on the bottom to (click here) for trial version and the days count down!!!
The seller claims that I'm not installing it right and says when not installed correctly it acts like a trial version!
I have uninstalled and reinstalled it 4 times and I get the same results!
Can anyone offer any comments, suggestions?
I would greatly appreciate it!
Rich

Welcome to our community
You might try re-posting your issue in a forum where CS5 is discussed. This forum is used to discuss Adobe Captivate Installation issues.
Click here to visit the Creative Suites forum
Cheers... Rick

Need urgent help on iOS 8 for iPhone 4S. I am unable to start my device after the update

Friends,
I wanted to upgrade to iOS8 on my iPhone 4S. I was not connected to iTunes. Clicked install while I was on a WiFi connection.
Post that I tried restarting and it is showing a pictorial diagram asking me to connect to iTunes.
I connected to iTunes and now it is asking me to restore. After going ahead with restore it is saying device can't be found.
I am really worried. Can anybody help me here.
Thank you.
Amol
<Personal Information Edited By Host>

Hey Amol B,
Thanks for the question. I understand you are experiencing issues updating/restoring your iPhone. Let’s try forcing the device intro recovery mode once more:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
If your device is not recognized while in recovery mode, see the following resource (specifically Step 5, sub step “If the device is not recognized while in Recovery Mode”):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

I need some help I updated my ipad last night to the new ios....but it deleted all the applications on it? Any way that I can restore the ipad to what it was before I updated it? Or is there a way to get them all back?

Can anyone help?

That's part of the process - the upgrade removes all the apps and then (as part of the syncing) restores them all - however, it's not clear that it's doing that. Connect your iPad to iTunes again and sync it - the apps should come back. If not, then the upgrade created a back-up of your device before installing - you can restore your iPad to that back-up when connected to iTunes.

I need a expert advice.

Dear All,
I need a help about how to prevent a user to export a MACHINE CERTIFICATE from Keychain?
Thanks.

Dear Allan,
We are installing a hardware certificate to identify the machine on the VPN so we need to prevent the user to export the certificate and to import on his personal machine and to hook on the VPN?
Thanks.

Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.

Similar Messages

Maybe you are looking for