Advice needed: loading text

I have a two colunmn table. On one side I have static copy. Specifically an Actionscript. the other column will be for a specific description for a certain section of the script (the user will select a section by clicking on it). Each part of the code will have a different explaination, so I'm unsure how to best accomplsh this. using a frame set, making each explanation its own page. Use some Javascript to load in text as selected.
If anyone can give me a good suggestion on the best way to do this, and/or a link it would be greatly appreciated

I'm a bit confused, you say the one side is static text, "to be specific Actionscript".  Are you storing the text as a Flash object?  The right side sounds like a cross between Spry master detail ( http://www.adobe.com/designcenter/dreamweaver/articles/lrvid4047_dw.html ) or a tabbed panel in a vertical setting as opposed to horizontal ( http://labs.adobe.com/technologies/spry/ui/samples/tabbedpanels2/SpryTabbedPanels2_sample1 .html ).
Can you please clarify the one side with the Actionscript and then come back and state whether the master/detail is what you are looking for or the tabbed panel?  Then we will be able to help you out more.

Similar Messages

  • I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    Hi
    That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
    Remove all your tabs and set the text in justified paragraphs.
    I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
    Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
    The text will jump into place the way you want it to.
    Hope that helps
    Paul
    PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
    after you've set it will be LOADS easier this way.
    You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

  • How to load text in div

    Hi. I am relatively new to DW and I am trying to find a simple solution to this issue. I have 2 situations in which I need to load text:
    1) I have 2 side by side div tags. The left will have links, that when clicked, I need an image to show in the right div. How can I do that?
    2) I need to load text via a text document to a div on the site. How do I code to "get text" from the doc on my ftp?
    I appreciate any advice you can offer.

    1) I have 2 side by side div tags. The left will have links, that when clicked, I need an image to show in the right div. How can I do that?
    2) I need to load text via a text document to a div on the site. How do I code to "get text" from the doc on my ftp?
    I appreciate any advice you can offer.
    For the first, you can use a 'disjoint' rollover technique.  Clicking on the link will swap an image that is present anywhere else on the page with a new incoming image.  You need to have a 'static' or holding image there already to hold that location for the incoming image.  You do this exactly the same way as you do a rollover, using DW's swap image behavior, except that you scroll through the list of images on your page to find the holding image by name before browsing to find the incoming swap image.
    To load text from a text document to a div on the site is more complex.  However it could be done pretty easily by using the DW "Change Property" behavior to change the 'src' property of an IFRAME that has been placed inside the target div.  The bugger here is your requirement to use an external text file.  If you didn't want to do that, it could be done more simply using DW's Set Text of Container behavior.

  • After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

    I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
    I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
    However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
    Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
    I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
    I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
    Any suggestions much appreciated!

    Maybe these will help:
    https://discussions.apple.com/message/17677533#17677533
    https://discussions.apple.com/message/18324129#18324129
    https://discussions.apple.com/message/18203126#18203126

  • Problem displaying dynamically loaded text in Flash CS3

    I created a Flash CS3 application that does not display
    dynamically loaded text (from internal AS3 scripts) on 3/6 of my
    client's computers. All computers run IE 6 and Flash Player 9. I
    cannot replicate the problem on any computer in my department. The
    problem seems to be related to Flash Player 9 or a browser
    setting/IT restriction. Has anyone encountered this? If so, have
    you found a solution?
    If I cannot find a solution, then I will need to almost
    completely redo the application.
    One slightly insane idea I have considered is to, if
    possible, convert dynamically loaded text to an image real-time. Is
    that possible?
    Btw, I have created a font in my library. Should I try
    manually embedding the font from the Properties menu and selecting
    all characters?
    Thanks in advance.

    yes, even though you may be using a font from the library,
    you still have to specify that each text field that uses that font
    embeds the font, and you'll need to select all characters(well not
    all, unless you require all the different scripts of the world -
    upper-case, lower-case, numerals and punctuation usual suffices).
    I bet if you checked, the computers where the font did not
    appear did not have the font on their system.
    Good luck
    Craig

  • Problem while loading texts and authorization objects file in RAR

    Hi all,
           i am getting internet explorer error while loading the texts and authorization objects text files in RAR .actually we uploaded rule file before this,does this step causes any error ?if so how to resolve this error.do i need to remove all rules/risks and then load text and authorization files? is there any shortcut to renove all risks generated in one shot? please reply me soon to resolve this.
    Thanks,
    Joseph.

    Hi Joseph,
    Please make sure to convert both the files in UTF-8 encoding format and then try to upload the files again. This should resolve the issue and if not then please paste the logs here.
    Regards
    Harleen

  • Interacting with flash via a loaded text?

    Here's my problem:
    I have a project with loads of text ergo I am loading text
    from external files with html formating. Now I have to insert
    videos linked to the text file too (as in "dolor ipsum ... press
    here to view video"). All I need is a code that lets my text
    interact somehow with the movie.
    Can I do it somehow through Javascript/Coldfusion/anything or
    do I have to scrap my text and make things manually ?

    I meant to write asfunction.
    Lon Hosford
    www.lonhosford.com
    May many happy bits flow your way!
    "Motion Maker" <[email protected]> wrote in
    message
    news:e3rpfa$7jh$[email protected]..
    If by "text interact somehow with the movie" perhaps you need
    to look at AS
    function and call an Actionscript function that loads the
    external video.
    http://livedocs.macromedia.com/flash/8/main/00001719.html
    Example there shows how to work it with external sound.
    Lon Hosford
    www.lonhosford.com
    May many happy bits flow your way!
    "pixelfreak01" <[email protected]> wrote in
    message
    news:e3mu2q$gf6$[email protected]..
    Here's my problem:
    I have a project with loads of text ergo I am loading text
    from external
    files
    with html formating. Now I have to insert videos linked to
    the text file too
    (as in "dolor ipsum ... press here to view video"). All I
    need is a code
    that
    lets my text interact somehow with the movie.
    Can I do it somehow through Javascript/Coldfusion/anything
    or do I have to
    scrap my text and make things manually ?

  • Flash CC Air iOS: Problems with loading text from an external xml located on a server.

    So I have this code allowing me to load text from an xml located on a server. Everything works fine on the Air for Android. The app even works in the ios emulator, but once I export my app to my ios device with ios 7, I don't see any text. The app is developed with Air sdk 3.9. What could be the reason? Do I need any special permissions like on Android? Does ios even allow to load xml from an external server?
    Any clues?

    It was my bad. I linked to a php file to avoid any connection lags, which was absolutely fine on the android, but didn't seem to work on the ios 7. So all I did is change the php extension to xml and it worked without any problems.

  • Loading Text

    Hi All,
    I am trying to load text data into Essbase using a rule file but it gives me this error
    \\ Invalid number in data column
    Is there any other way to load text?
    Appreciate your help
    Best Regards

    Is it a planning application or is it a pure essbase application as this is a planning forum, if it is a planning application then you cannot load text directly to essbase and you will need to use an alternative method e.g. Outlineload utility, EPMA data synchronizer, ODI
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to make mouseover scroll buttons attached to textarea with external loaded text ?

    Hi,
    I am working in Flash CS3 and AS3, and I'm not good in
    scripting.
    I want to make a dynamic textarea with loaded text from an
    external textfile, and then I want custom made arrow buttons to
    start scrolling the loaded text on mouseover (not click) andt stop
    scrolling on mouseout. Ala like in this webpage:
    http://boomjinx.com/
    The part with the loaded text is fine, but I can't manage to
    script the arrow buttons to do what I've just described. Even
    though I have searched the Internet for recipes I just find how to
    scroll loaded text on click or with a scrollbar. This problem is
    starting to drive me crazy!! Is there anyone that have a recipe for
    this??

    Here's one approach:
    First you need to create a dynamic mutline textfield that has
    autoSize properties set to handle a varying amount of text.
    Then you need to embed the font because you are going to use
    a mask over the textfield to define the viewable area of it.
    Then you will use the buttons to change the textfield's y
    property to move the textfield up/down vertically. You will
    probably need to use an ENTER_FRAME event handler so that a
    continuous hovering of a button will cause the textfield to
    continue moving until it either reaches one end or the other or
    when the hovering ends.
    Before you try to tackle that though, just make it so that
    hovering a button will cause the textfield to move up or down one
    increment of distance. Just take it one step at a time.

  • Does OID repository needs Oracle TEXT?

    Does OID repository needs Oracle TEXT?
    I remember in 10g I had to add this option, and don't remeber for what purpose. can't find any reference in 11.1.1.5 documentation what was it for?

    If you are using a file datastore, then you load the file name into a varchar2 column and you do not load the whole file into a clob column. I have provided a demonstration below. In the demonstration below, the binarytree.txt file contains the word "test1" and the some_title.txt file contains the word "test2". The E drive contains a CD-RW disc, but the machine is my server. The drive and directory path that you use must be accessible to the server. You cannot use a drive on a client machine.
    SCOTT@10gXE> begin
      2   ctx_ddl.create_preference ('mypref', 'FILE_DATASTORE');
      3   ctx_ddl.set_attribute ('mypref', 'PATH', 'e:\');
      4  end;
      5  /
    PL/SQL procedure successfully completed.
    SCOTT@10gXE> create table exp1
      2    (docids     number primary key,
      3       title     varchar2 (20),
      4       text     varchar2 (30))
      5  /
    Table created.
    SCOTT@10gXE> insert into exp1 values (1, 'binarytree', 'binarytree.txt')
      2  /
    1 row created.
    SCOTT@10gXE> insert into exp1 values (2, 'some_title', 'some_title.txt')
      2  /
    1 row created.
    SCOTT@10gXE> commit
      2  /
    Commit complete.
    SCOTT@10gXE> create index myindex on exp1 (text)
      2  indextype is ctxsys.context
      3  parameters ('datastore mypref')
      4  /
    Index created.
    SCOTT@10gXE> select * from exp1
      2  where  contains(text, 'test2') > 0
      3  /
        DOCIDS TITLE                TEXT
             2 some_title           some_title.txt
    SCOTT@10gXE>

  • How to load text data from multiple source systems.

    Hello Gurus,
    I am facing an issue of loading master data text into 0Material. I have loaded attribute data from 2 source systems. But i am not able load text data from the same 2 source systems as i am not able to see 0logsys in transfermation rules of 0MATERIAL.
    Please gimme some inputs to proceed.
    Thanks in advance
    Peter

    Hi,
    I dont think that you need the source system info here, texts are mapped to attributs and attributs to source systems.
    so try to load simply:
    material key, text, lang (optional)
    Hope it helps.

  • Cannot Load Text Without Cheking the (With Master Data option)

    Hi,
    Suppose I want to create a Characteristic Infoobject, that will have only <b>text</b> but no attributes or hierarchies.
    For that in the Master data/texts tab of the Infoobject definition I checked the WITH TEXTS option but unchecked the WITH MASTER DATA option.
    But when I was trying to load the text to the infoobject it was not giving an error. But when I checked the WITH MASTER DATA option I was able to load the text.
    Can any one say why this happens, that though we do not want to load attributes, we have to check the with master data option for loading texts only.
    Thanks in advance.

    Can You tell us the error description..
    You donot need to check the master data option..
    Texts can be loaded without checking that option..
    If you tell us the error message we would be able to help you identify the real cause..
    Check for error log in SM37 or ST22
    ashish

  • Pointer doesn't change into the loaded graphics icon or the loaded text icon

    My pointer doesn't change into the loaded graphics icon or the loaded text icon when placing images or text. How can I fix it?
    Thanks!

    You only need to ask once.
    Quick question

  • How to load text without a variable

    As far as i know in AS2 to load a text i need to define a
    variable in text like:
    text=this is the text displayed.
    right now i have to display a text verision of a website
    which i cant put a variable like "text=" into it, im wondering is
    there anyway to load text in AS2 without using a variable? because
    in AS3 you can use the URLLoader.
    Andrei1 pointed out that getURL might work, does anyone know?
    thanks a lot

    yay it works, some what, errm, right now im getting errors
    when i publish anything with actionscript 2.0
    the errors are :
    BitmapData.as
    lines 7,16, 26, 27, 28, 31, 41, 43, 45, 46, 53, 63, 76, 83
    line 7:unable to add 'flash.geom.Rectangle' [my flash is in
    another language so i translated this]
    the rest of the lines are: unable to add 'Rectangle'
    Transform.as:
    line 15:unable to add 'flash.geom.Rectangle'
    Movieclip.as:
    line 36:unable to add 'flash.geom.Rectangle'
    the code is working but the text box is weird here is a
    screenshot:
    http://img512.imageshack.us/img512/8532/loaderha4.jpg
    and i have to select the text and drag to the right to see
    the rest of the text.
    I think this is something to do with the errors? because i
    can't add Rectangle? or its the text box needs more
    tweaking?

Maybe you are looking for