Advice needed on wireless router

Hello
I currently need a wireless router to give my wireless clients an internal address range e.g. 10.1.1.x/24
But, I need to configure the router WAN port on a different subnet (using static ip e.g. 172.30.30.1/24) and obviously with another uplink router say, 172.30.30.254/24 and manual dns address.
I need the wireless router to NOT run network address translation on wireless clients making requests, i.e. so the requests come out with their original IP addresses 10.1.1.x. This is because another device upstream does this and we need to see the clients original source ips.
My questions from looking around at forum posts:
- is this achievable on the wrtg models e.g. wrtg54g, with the option to set "router mode" instead of "gateway mode" ?
- is this achievable on the newer e1000 by disabling nat mode, or does this do something different.
Please could someone advise me.
thanks

Yes, that's possible. Set LAN and internet connection as needed and disable NAT (aka "router mode").

Similar Messages

  • Need advice on a wireless router.

    My Father inlaw has desktop pc running xp with a standard broadband connection(not wireless). He just purchased a macbook pro and wants to connect to broadband wirelessly. I know he needs a wireless router but what sort?
    Help appricated.

    Any router will work, as networks rely on industry standard protocols, that all PC makers adhere to.

  • Do i need a wireless router for my other products to connect wirelessly

    do i need a wireless router for my other products to connect wirelessly

    A bit more information, please.  What model computer are you using?  Does it have wifi capability?  How do you connect it to the internet?  What other products do you want to connect to?  Does each of them have wifi capabiltiy?
    I'm sure that with some or all of this info someone here has the answer.
    Good luck,
    Ray

  • Do i need a 'wireless router' to share ISP w/ adjacent computers?

    How to share my ISP connection with 2 other computers belonging to family in adjacent rooms.
    Do I understand correctly that I must getting a 'Wireless router'?
    Is that the onlyest &/or bestest way to do so?
    And how to insure privacy of all? Do I understand correctly that a wireless router will have instructions and we should each be able to have a separate password and therefore secure separate privacy with no spying.
    There's no phone lines in other rooms ( if that has anything to do with it?)
    We're not hackers and not computerly sofisticats, obviously or I wouldn't to be axing this Q.
    I'm now getting DSL broadband thru my home phone line in the wall hooked up by wire to my DSL modem and then to my MacMini.
    I think this is a basic Q, but I've never 'networked' with other computers, and don't know nuthin bout no routers.
    Would appreciate helpful direction.
    Oh, and you will be thank ed.

    You need a router, but it doesn't necessarily have to be a wireless one. You could run network cables to the other two rooms from a wired router. Most wireless routers also have wired ports, so you can mix the connection types as well. Privacy within your network depends most on if the connected computers have sharing turned on. Beyond that, a wireless network can allow others to see the information you are passing to the router, although it would take time to decode the information and some degree of skill. Some Macs are also not well equipped to perform such snooping, depending on the wireless support they have. If you wish to use wireless to do your internet connection sharing, you will also need to be sure all the systems have wireless capability.

  • Wireless connection - do i need a wireless router or can i go via  macmini?

    Hello all
    Bit of a newcomer to the whole networking side of things so excuse my ignorance.
    I have a mac mini set up to the internet through a cable modem. Can I use airport to connect my new macbook to the internet via my mac mini or would i have to set up some kind of wireless network to to this? reluctant to shell out for a wireless router or one of the more expensive airport bits of kit if i dont have to!
    any advice much appreciated!

    Just reading the wireless posts. Here's a stupid question, although I think I know the answer? I have an iMac G5 running Panther - without an Airport card - connecting to the internet via Ethernet and a cable modem. Can I share this internet connection with my new Leopard MacBook via Airport?

  • E1200 wireless works great, but needing another wireless router to hardwire connect to AVR

    I have an e1200 Linksys router hooked up and working well, a wired connection to my first computer a wireless connection to my second (laptop) in the basemen and to my HDTV. My question is what Linksys device would I need to enable me to get a wireless connection in the basement to then hardwire connections to my Blue-Ray player and my HK AVR-3650. Any advise would be a great help as in I have no clue on what I need, but again I would like to somehow take a wireless signal from one wireless router to another to then have wired connections from both wireless routers. Also, was the e1200 not the right router or can I still make something out of it? Thanks in advance - Ohio

    Aside from powerline adapters, you may consider as well WES610N. It is a wireless switch that you can connect to your home/main router to extend your existing network wired and wirelessly. It has 4 ethernet ports on the back for you to connect your wired devices to your network. For more information about this device, refer to these links: Expanding your home network using a WES610N Dual-Band N Entertainment Bridge, Linksys WES610N Frequently Asked Questions.

  • Suggest a good wireless router...

    Hello guys,
    Need some help here. Being a total n00b @ computer technology, I need some advice purchasing a wireless router. We recently moved to a duplex house and got a wimax internet connection for which I need a wireless router. We also have a Vonage VoIP phone using a Linksys RTP300 which off late developed some issues.
    So can I get a device which acts as both a VoIP adapter and wireless router?
    If that's not possible i need a good wireless router and VoIP adapter.
    I have zeroed on to a cpl of linksys routers viz.  Linksys WRT54GL, Linksys WRT 310N, Linksys WRT 160NL.
    My requirements would be:
    1.Being a duplex house I need good reception on both the floors.
    2.Good data transfer speeds.
    3.Budget is 150$ max(for router and voip adapter). 
    I have a cpl of laptops(Vaio VGN FZ35GN and 3 year old Dell). Heard a great deal abt WRT54GL but a lil apprehensive abt its performance compared to WRT 310 and 16NL.
    Help me guys.......

    There are few things that you need to rule out - Out Of The Box - which are the following:
    1. Can you access WPA2 (Personal) on all the Laptops since you have mentioned that you have old laptops.
    2. If you cannot then you should try a Linksys WRT54 (G/GL/GS/GX) Since you can connect older ones with that model.
    3. If you do then you might as well go with a WRT310N so that you would be good to go even if you create a gigabit network.
    - o_o

  • Which Wireless Router has a strongler signal than the E3000?

    I need a Wireless Router that will have a strong signal for a 2 story house. I'm currently using a E3000 ans its not doing the job. Thanks!

    I went w/ a low-end Belkin wireless router, and it's worked great so far.

  • Best wireless router too share Verizon Wireless USB720 connection?

    Our connection with Verizon Wireless via USB720 modem on an older Imac keeps dropping because we us that via airport to connect 2 other Macbooks. In research, I guess it's because airport and EVDO share a similar RF. Anyway, I need a wireless router for the USB720, and I don't have a clue where to start. What's the best router? Am I going to have to install the VZ Manager for the USB720 on the router, via the Imac?

    check out the 3G/cellular routers from Cradlepoint.
    The best one for home use is the http://3gstore.com/MBR1000 because of its WiFi N wireless range.
    You won't use/need VZAM. you connect via airport or ethernet cable to the MBR1000

  • Skype says a wireless router is required.

    Hello,
    I am trying to get my in-laws set up with Skype and they say when they try to use it, it tells them they need a wireless router. They are using a Dell laptop and a wired router.  I myself use a wired router without issues so I'm not sure what they are not doing correctly, but I'm hoping someone can help me to help them.
    TIA

    prncsnyc wrote:
    Hello,
    I am trying to get my in-laws set up with Skype and they say when they try to use it, it tells them they need a wireless router. They are using a Dell laptop and a wired router.  I myself use a wired router without issues so I'm not sure what they are not doing correctly, but I'm hoping someone can help me to help them.
    TIA
    The router is 'wired', in other words plugged into the wall and directly wired to the internet connection (possibly a cable modem). The router gives a 'wireless' connection availability and Skype need this to be used. The router is setup with security or not and a name. On your phone you need to connect to a wireless connection that your router is broadcasting. You'll see it on the list with a default name and no password (if there is no security or name setup on your router, not recommended) or the name you gave the router and an optional password (recommended). Connect to it on your phone. You can also connect to other hotspot wireless connections at coffee shops and airports. The ones with a lock displayed require a password.
    All routers (not modems) send out a wireless signal that can be used by anything that can pickup a wireless signal like phones and laptops. There is no data charge for data on your phone while you are connected wirelessly. I use it whenever I can! Good luck!

  • What is the best wireless router for my imac G4

    i need a wireless router for my imac g4. Which one do you recommend? All all wireless routers capatible with macs?

    As Donald mentions, the routers are all compatible with Macs, but the software CD that they include often has Windows specific software on them that is really just a front-end for configuring the router for use. It does nothing that you cannot do yourself manually by accessing the router through the IP address that gets you into the router settings.
    If it sounds difficult, it certainly is not. Once you are in - and that is simple - the router's info is in a nice graphical interface that is simple to use.
    I use a Netgear WGR614 for my mixed Mac-PC network at it works like a charm. I got it at Best Buy for $39.99.

  • Which T1 Wireless router to choose??

    We just got a T1 line installed for a remote location...
    What would be a good wireless router to get. They are going to WEBVPN into our main building. But i need a wireless router to support T1 speeds, since we are paying for it...
    Any help would be appreciated!!

    Thanks for the rate.
    Both routers are ADSL+ capable.
    I've seen your post from previous NetPro topics. I am very curious to know how many branches and offices are you going to operate. Is your Head Office going to have Wireless too?
    If your office will have Wireless in plan, I would recommend that you consider a Wireless LAN Controller. You deploy your AP's to your branches/offices and configure them for Hybrid Remote End AP (H-REAP). It's a very cost effective solution.
    Introduction to Wirless LAN Controllers (Standalone):
    http://www.cisco.com/en/US/products/ps6302/Products_Sub_Category_Home.html
    H-Reap Design and Deployment Guide
    http://www.cisco.com/en/US/products/ps6087/products_tech_note09186a0080736123.shtml
    H-REAP Configuration Guide
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml
    Hope this helps your solution.

  • What is the best long range wireless router, airport extreme or time capsule? Or?

    I need a wireless router that will reach 350--400 feet with a strong enough signal to use Netflix. This will be line of site in a rural area reaching from one trailer to another. Both trailers run on 12volt solar systems but trailer A has an inverter to convert to 120volts for a wireless router. Trailer B only has 12volt power so the Internet signal must come exclusively from the wireless router in Trailer A. There is no electricity available for booster wireless routers in between the two trailers.
    We don't need all of the bells and whistles like being able to connect to printers etc. This is just about sending out a strong enough signal to watch Netflix. Which is more powerful for this purpose? Airport Extreme or Time Capsule? If neither of those is strong enough, what is?
    Thanks,
    SV

    The issue you are really facing is the long distance (at the WiFi frequencies) you have to travel.  The Extreme has a radiated power of 23 dBm, nominal, which can reach 50-150 feet depending on you you are talking to...and that is measured in a closed test chamber at ideal air temperature and humidity, no obstructions.  In the real world that signal will be attenuated significantly just by the air alone, assuming completely obstacle free path, and subject to interference from other sources in the area, such as cell phones and cordless phones, and microwave ovens.
    The AirPort units have enclosed antennas that cannot be connected with an external gain antenna.  So you are stuck with what is in the box.
    Other products, commercial, do use external antennas so you may want to do some research in that area.
    Keep in mind that the 802.11n protocol uses two frequency bands, 2.4 GHz and 5 GHz.  Signal attenuation increases rapidly as a function of frequency.  You will get much less distance if you use the 5 GHz band, so it would be best to restrict operation to 2.4 GHz.
    Now, another aspect, at 2.4 GHz you are in the Ultra High Frequency portion of the spectrum...exposure to radio frequency energy at high power should not be considered a safe or desirable thing in the UHF range.  Most communication specialialists try to minimize exposure at these frequencies.  The reason for saying this is you will need significantly greater radiated power than the Extreme can deliver to reach 400 feet.  You might want to do some searches on health effects of the RF energy you will be transmitting.
    So, bottom-line, I have difficulty encouraging using wireless tranmission at the WiFi frequencies for the distance you need.

  • Need advice on Wireless Router purchase.

    I need some quick advice on purchase of a wireless router. I will be also needing to use a network switch to increase the available # of wired ports, as we currently have four wired devices (3 computers, one newish iMac and two older Macs, and a blue ray player, and we will be adding a Wi console to the wired network soon too). The wireless is mostly for a year old laptop. We are currently using a 5 year old at least Linksys wired router. Security is not an issue as far as others sneaking in to the network, I think, as my nearest neighbor is maybe a mile away (pretty rural here).
    Would it be best to buy an Airport Extreme base station, or can I do better, and/or save some money with another router?
    Thanks

    I will likely connect our printers either via an ethernet cable or via USB.
    For reference, the AirPort Extreme can share a printer connected to it by USB. It can also work with printers attached to one of its Ethernet ports. However, for the latter, the printer would need to be network-ready (meaning it has a built-in feature for sharing.)
    As for 2.4 and 5 GHz radio bands, I don't know the difference.
    The most important thing about bands is how they compare on speed vs. distance. The higher the frequency, the higher the potential speed, but at the cost of distance ... and vice versa for the lower frequency band.
    Using the AirPort Extreme as an example, with a wireless client (capable of accessing either band), it will experience the best speed-related performance close (within the same room) on the 5 GHz but will most likely only connect on the 2.4 GHz band when in another room.
    Also, I am concerned about firewall protection, from pinging or whatever, but I lack technical knowledge of it. I essentially would like our home network to be secure from incoming pings or attacks.
    The AirPorts are very easy to set up. They pretty much run right out of the box. They offer very good security but they are not "commercial-grade" ... meaning they offer only a certain level of protection. However; note that increased protection typically comes with more complexity and maybe more difficult to configure.

  • I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

    THE SHORTER STORY
    My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
    I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
    In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
    What is the best configuration or set-up to accomplish my above goals?
    Thank you in advance for your assistance!!!
    THE FULL STORY
    I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
    (1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
    (2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
    (3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
    (4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
    (5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
    (6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
    I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
    The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
    I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
    I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
    My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
    However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
    Modem
    Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
    Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
    Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
    Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
    ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
    Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
    Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
    Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
    WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
    Existing Laptops on the Wireless Network Requiring Time Machine Backups
    MacBook Air (11-inch, Mid 2012) OS X 10.8.2
    MacBook Pro (13-inch Mid 2010) OS X 10.8.2
    Other Existing Apple Products (Clients) on the Wireless Network
    iPod Touch (second generation) is model A1288.
    iPad (1st generation)
    Apple TV (3rd generation) - Quantity two (2)

    Thanks Bob Timmons.
    In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
    I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
    Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
    Create a wireless network
    Extend a wireless network
    Off
    Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
    Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
    DHCP and Nat
    DHCP Only
    Off (Bridge Mode)
    Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
    How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
    Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
    Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
    I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
    Extenders / Repeaters / Wirelessly Extending the Wireless Network
    I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
    Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
    Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
    So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Maybe you are looking for

  • Does exist a way to read data from IP planning cube with ABAP?

    Hello All. My scenario is as follows: I have an ODS where we store costcenters to be planned. This ODS is loaded via a manual falt file load (regular dta transfer process).  In order to avoid inconsisten data in the planning cube, I want to check in

  • Greyed out ID3 Tags Artwork problem

    I have a few mp3 files(not "read only") that have missing song information when checking the advanced section in the summary tab (window's explorer). The only ones I can see are the "track number," "Title" and "comments" fields. For example, the Arti

  • Will the TX work with an Altec Lansing IMT1 speaker dock

    Hi all, I have a palm tx and an altec lansing inmotion (imt1) speaker dock.  When i plug my TX into it, i cannot hear any sounds through the imt1 speakers.  I can only hear sound through the rear speaker on the TX.  The battery symbol has a lightning

  • Exception from crimson in Tomcat

    Hi, I am facing a very strange senario while using Tomcat3.2.4. When I ran a WebApp under the Tomcat, I got an exception, please see below: With the following stack trace: java.lang.NullPointerException at org.apache.crimson.tree.TextNode.cloneNode(T

  • How to deal with Mailbox is full (i'm on IMAP)

    hi all. i realize this is not specifically a Mail problem but would anyone mind helping me figure out if there are various ways to deal with full mailboxes with mail getting kicked back from senders? i have a large amount of email addresses and i hav