AE files 59.97 on Export 23.98 on FCP import?

Good afternoon ladies and gentlemen.
We have hired a new editor recently who regularly works with AE to create really cool looking FX. We then import his QT exports into FCP and cut into our DVCPro 720p60 timeline. When we import the QT's they show up as 23.98 instead of 59.94. The clip length is still the same the frame rate is just off. So we end up missing the back half of the clip. Now if I double the length of the clip we can see the whole shot but at the wrong frame rate.
I opened the clips in QT and they played properly and the frame rate showed 59.94. But for some reason when I import the clips into FCP they are not being read properly. I checked my settings in AE and everything looks correct. As a work around I sent the clips thru Compressor and used the DVCPro HD 720p60 setting. Now when I import them they read as 59.94. The native footage that we are using in AE is shot on an HVX200 using the DVCPro HD 720p60 setting. I am trying to stay native all the way thru the process.
We are just made the change from CS3 to CS4 and are using almost all the latest updates as I did a clean install of all applications last week.
Message was edited by: adeath

Eventually this has been resolved. All footage imported into FCP 6 MUST have an exact frame rate of 23.976 otherwise FCP will NOT like it, i.e. render it properly.
So, NOT 23.98 it must be 23.976. I used Cinema Tools to conform all my footage to that frame rate and Presto! everything is working fine now.

Similar Messages

Exporting to Quicktime for FCP Import

I just finished a project (digital pictures) using Still Life software from Granted (www.grantedsw.com). I want to export my project to a Quicktime movie for import into Final Cut Pro 4.5, to add transitions, music, etc.
When I go to export to Quicktime it asks me under "Motion" for how many frames per second (it is by default at 12 fps) and key frame (which is by default at 24 frames.
I want the best quality for importing into Final Cut. How many fps should I use and what is the best key frame?
I am also given the option for the size:
160x120
320x240
640x480
720x480
720x576
Not too sure what size is best, as well. Any help would be great. Thanks!

I'd be matching the export settings to the sequence settings you intend to edit this movie into... so for say DV NTSC: 720X480 at 29.97 fps...
Jerry

File does not exist: /export/home/oracle/orahtml/marvel/images/spacer.gif

Seeing this error in the apache log:
File does not exist: /export/home/oracle/orahtml/marvel/images/spacer.gif
I know there are spacer.gif files under the theme folders but why is it looking for a spacer.gif file in the images folder? Is this a bug?

Hello,
Yes I just checked it's a problem with theme 9 there are a couple of places where the theme calls #IMAGE_PREFIX#spacer.gif when it should call #IMAGE_PREFIX#themes/theme_9/spacer.gif
There are two ways for you to fix this
1. Copy themes/theme_9/spacer.gif to the top level images directory, I recommend this one because then if someone creates the theme from the repository again it wont' come up agian.
2. Change all #IMAGE_PREFIX#spacer.gif to #IMAGE_PREFIX#themes/theme_9/spacer.gif in theme 9, if you export the theme you can just us a search and replace the export to do this and then reapply the theme.
This as been bugged and will get fixed in future version.
Carl

I have converted my pdf files to docx files using the Adobe Export PDF but when I drag my converted files to Word there is no text, just blank pages.

I am really new to Adobe and Creative Cloud and its logic so I hope someone can help me understand it. My objective is to get my scanned PDF docs converted to text document files so I can open and edit in Word.
I have scanned my documents into a pdf format. I then dropped the pdf file into my Adobe Export from PDF. It exported and converted them to docx files just fine. When I click on the created docx file I have the correct number of pages but they are completely blank. I don't have any converted text. Am I missing a step? I have also dropped these files into my Word with the same result.

Are you still experiencing a problem with Adobe Send? We inadvertently introduced a problem earlier today (now fixed), but you reported your issue was last night.
Anyway, can you check again?

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Write xmp sidecar files without need to export masters - script

I've written a script to write xmp sidecar files for referenced and online images (the 2 conditions in the script) of the selected images. I looked for a while at system events and other stuff to be able to write the xmp file, but i'm not a programmer, so in the end i chose the long and dirty way to do it.
This script will export all iptc expanded fields as aperture does (creating basically the same file). It can be easily adjusted to include other tags, even custom ones. I don't know how to get at the adjustments for images, otherwise those could be included as well.
If anyone has the energy to clean this up and make it faster, feel free to do so. Next, I'm going to try to write a script to do the opposite, import xmp sidecars for imported online and referenced files.
Here it goes (thanks to Brett Gross for the database part to find the master filename):
--script to create sidecar xmp files for referenced files without having to export masters. parts of the script (finding the file name) are by brett gross
property p_sql : "/usr/bin/sqlite3 "
global g_libPath
on run
my getLibPath()
--counter for processed images, reset, just in case
set mastercount to 0
tell application "Aperture"
if not (exists selection) then
display dialog "You have to select at least one image" buttons {"OK"} default button 1
return
else
display dialog "You have selected " & (count of selection) & " images." & return & "Continue?" default button 1
end if
set theSel to selection
--run through the selected images
repeat with currentpic from 1 to count of theSel
tell item currentpic of theSel
-- only apply to referenced and online images
if referenced and online then
set mastercount to mastercount + 1
set curID to id
--find the master file path and name - this part by brett gross, thanks
set libPOSIX to POSIX path of g_libPath
set libDBPOSIX to (libPOSIX & "/Aperture.aplib/Library.apdb") as string
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZFILEUUID from ZRKVERSION where ZUUID='" & curID & "'\""
set ZFILEUUID to do shell script theScript
# ---------- Get the master's path
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZIMAGEPATH from ZRKFILE where ZUUID='" & ZFILEUUID & "'\""
set ZIMAGEPATH to do shell script theScript
# ---------- Get the master's disk name
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZFILEVOLUMEUUID from ZRKFILE where ZUUID='" & ZFILEUUID & "'\""
set ZFILEVOLUMEUUID to do shell script theScript
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZNAME from ZRKVOLUME where ZUUID='" & ZFILEVOLUMEUUID & "'\""
set diskName to do shell script theScript
set imgPath to (diskName & "/" & ZIMAGEPATH)
--end brett gross part
--strips extension, seems to work for files and paths with more than one period
set oldlim to AppleScript's text item delimiters
set AppleScript's text item delimiters to "."
try --remove last extension only
set contador to text item -1 of imgPath
set noExtension to Unicode text 1 thru -((count of contador) + 2) of imgPath
on error --handle files with no extensions
set noExtension to imgPath
end try
set AppleScript's text item delimiters to oldlim
--create the file and path name with the .xmp extension for writing
set xmpPath to "/Volumes/" & noExtension & ".xmp" as Unicode text
--convert posix path to alias for easier write and read handling
set xmpPath to POSIX file xmpPath as file specification
-- header for xmp file
set xmpheader to ("<?xpacket begin='' id=''?>
<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='XMP toolkit 2.9-9, framework 1.6'>
<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#' xmlns:iX='http://ns.adobe.com/iX/1.0/'>") & return
-- footer for xmp file
set xmpfooter to ("</rdf:RDF>
</x:xmpmeta>
<?xpacket end='w'?>") & return
--xmp content, part 1
--check for existence of iptc tags, create content or empty string depending on existance of tags
if (exists IPTC tag "Contact") or (exists IPTC tag "Country/PrimaryLocationCode") then
set xmpcontentpartone to ("<rdf:Description rdf:about='' xmlns:Iptc4xmpCore='http://iptc.org/std/Iptc4xmpCore/1.0/xmlns/'>") & return
try
set CountryCode to value of IPTC tag "Country/PrimaryLocationCode"
set xmpcontentpartone to xmpcontentpartone & tab & "<Iptc4xmpCore:CountryCode>" & CountryCode & "</Iptc4xmpCore:CountryCode>" & return
end try
try
set CreatorContactInfo to value of IPTC tag "Contact"
set xmpcontentpartone to xmpcontentpartone & tab & "<Iptc4xmpCore:CreatorContactInfo>" & CreatorContactInfo & "</Iptc4xmpCore:CreatorContactInfo>" & return
end try
set xmpcontentpartone to xmpcontentpartone & ("</rdf:Description>") & return
else
set xmpcontentpartone to ""
end if
--xmp content, part 2
--check for existence of iptc tags, create content or empty string depending on existance of tags
if (exists IPTC tag "Category") or (exists IPTC tag "City") or (exists IPTC tag "Country/PrimaryLocationName") or (exists IPTC tag "Credit") or (exists IPTC tag "DateCreated") or (exists IPTC tag "Headline") or (exists IPTC tag "Province/State") or (exists IPTC tag "Source") or (exists IPTC tag "SpecialInstructions") or (exists IPTC tag "SupplementalCategory") or (exists IPTC tag "Writer/Editor") then
set xmpcontentparttwo to ("<rdf:Description rdf:about='' xmlns:photoshop='http://ns.adobe.com/photoshop/1.0/'>") & return
try
set Category to value of IPTC tag "Category"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Category>" & Category & "</photoshop:Category>" & return
end try
try
set City to value of IPTC tag "City"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:City>" & City & "</photoshop:City>" & return
end try
try
set Country to value of IPTC tag "Country/PrimaryLocationName"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Country>" & Country & "</photoshop:Country>" & return
end try
try
set Credit to value of IPTC tag "Credit"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Credit>" & Credit & "</photoshop:Credit>" & return
end try
try
set DateCreated to value of IPTC tag "DateCreated"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:DateCreated>" & DateCreated & "</photoshop:DateCreated>" & return
end try
try
set Headline to value of IPTC tag "Headline"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Headline>" & Headline & "</photoshop:Headline>" & return
end try
try
set State to value of IPTC tag "Province/State"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:State>" & State & "</photoshop:State>" & return
end try
try
set Source to value of IPTC tag "Source"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Source>" & Source & "</photoshop:Source>" & return
end try
try
set Instructions to value of IPTC tag "SpecialInstructions"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Instructions>" & Instructions & "</photoshop:Instructions>" & return
end try
try
set SupplementalCategory to value of IPTC tag "SupplementalCategory"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:SupplementalCategory>" & SupplementalCategory & "</photoshop:SupplementalCategory>" & return
end try
try
set CaptionWriter to value of IPTC tag "Writer/Editor"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:CaptionWriter>" & CaptionWriter & "</photoshop:CaptionWriter>" & return
end try
set xmpcontentparttwo to xmpcontentparttwo & ("</rdf:Description>") & return
else
set xmpcontentparttwo to ""
end if
--xmp content, part 3
--check for existence of iptc tags, create content or empty string depending on existance of tags
if (exists IPTC tag "Byline") or (exists IPTC tag "Caption/Abstract") or (exists IPTC tag "CopyrightNotice") or (exists IPTC tag "Keywords") or (exists IPTC tag "ObjectName") then
set xmpcontentpartthree to ("<rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1/'>") & return
try
set creator to value of IPTC tag "Byline"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:creator><rdf:Seq><rdf:li>" & creator & "</rdf:li></rdf:Seq></dc:creator>" & return
end try
try
set description to value of IPTC tag "Caption/Abstract"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:description><rdf:Alt><rdf:li xml:lang='x-default'>" & description & "</rdf:li></rdf:Alt></dc:description>" & return
end try
try
set rights to value of IPTC tag "CopyrightNotice"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:rights><rdf:Alt><rdf:li xml:lang='x-default'>" & rights & "</rdf:li></rdf:Alt></dc:rights>" & return
end try
--keywords, slightly different, as they need to be written as a list and not as a string
--i don't think it's a problem if we create an empty list if there are no keywords present.
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:subject><rdf:Bag>" & return
--make list item for every keyword
try
repeat with n from 1 to count of keywords
set cursubject to name of (keyword n)
set xmpcontentpartthree to xmpcontentpartthree & tab & tab & "<rdf:li>" & cursubject & "</rdf:li>" & return
end repeat
end try
set xmpcontentpartthree to xmpcontentpartthree & tab & "</rdf:Bag></dc:subject>" & return
try
set title to value of IPTC tag "ObjectName"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:title><rdf:Alt><rdf:li xml:lang='x-default'>" & title & "</rdf:li></rdf:Alt></dc:title>" & return
end try
set xmpcontentpartthree to xmpcontentpartthree & ("</rdf:Description>") & return
else
set xmpcontentpartthree to ""
end if
--part four. aperture doesn't seem to export anything there
set xmpcontentpartfour to "<rdf:Description rdf:about='' xmlns:photomechanic='http://ns.camerabits.com/photomechanic/1.0/'>
</rdf:Description>" & return
--part five. rating
set xmpcontentpartfive to "<rdf:Description rdf:about='' xmlns:xap='http://ns.adobe.com/xap/1.0/'>" & return
try
set Rating to main rating
set xmpcontentpartfive to xmpcontentpartfive & tab & "<xap:Rating>" & Rating & "</xap:Rating>" & return
end try
set xmpcontentpartfive to xmpcontentpartfive & "</rdf:Description>" & return
--join everything
set xmptext to xmpheader & xmpcontentpartone & xmpcontentparttwo & xmpcontentpartthree & xmpcontentpartfour & xmpcontentpartfive & xmpfooter
--write file
my writexmpFile(xmptext, xmpPath)
end if
end tell
end repeat
display dialog "Processed " & mastercount & " referenced and online image(s)." buttons {"OK"} default button 1
end tell
end run
-- write xmp sidecar file routine
on writexmpFile(theContents, xmpFileName)
--tell application "Finder"
try
open for access xmpFileName with write permission
set eof of xmpFileName to 0
write (theContents) to xmpFileName starting at eof
close access xmpFileName
on error
try
display dialog xmpFileName
close access xmpFileName
end try
end try
--end tell
end writexmpFile
--this part copied from Brett Gross-------------------------------------------------------------------------- --------------------------------
on getLibPath()
tell application "System Events" to set p_libPath to value of property list item "LibraryPath" of property list file ((path to preferences as Unicode text) & "com.apple.aperture.plist")
if ((offset of "~" in p_libPath) is not 0) then
-- set p_posix to POSIX file p_libPath
set p_script to "/bin/echo $HOME"
set p_homePath to (do shell script p_script)
set p_offset to offset of "~" in p_libPath
set p_path to text (p_offset + 1) thru -1 of p_libPath
set g_libPath to p_homePath & p_path
else
set g_libPath to p_libPath
end if
end getLibPath
--end brett gross part

imigra wrote:
I've written a script to write xmp sidecar files for referenced and online images (the 2 conditions in the script) of the selected images. I looked for a while at system events and other stuff to be able to write the xmp file, but i'm not a programmer, so in the end i chose the long and dirty way to do it.
This script will export all iptc expanded fields as aperture does (creating basically the same file). It can be easily adjusted to include other tags, even custom ones.
Excellent stuff!
I don't know how to get at the adjustments for images, otherwise those could be included as well.
They are stored as binary data in the Version XML files at the bottom level of the Library package. You can also have a look around in the ZRKIMAGEADJUSTMENT table, but again the actual settings for each adjustment are in binary form.
If anyone has the energy to clean this up and make it faster, feel free to do so.
As far as I can remember, Aperture uses the 'proper' IPTC tag names when accessing them via AppleScript, so you may be able to do a loop through all the IPTC tags for each image, rather than picking out each specific one. But that would need checking. The EXIFTools site is a good place to find out about the different ways that IPTC data can be described.
Next, I'm going to try to write a script to do the opposite, import xmp sidecars for imported online and referenced files.
Don't rush unless you feel like it - I've already started planning out a free (as in beer and speech) XMP importer with a GUI so that you can choose how to map the XMP CORE tags that don't exist in Aperture. You've given me an extra idea, though - if we can decide on a set of custom tags, my importer could map the XMP CORE tags to them and your exporter could export those tags.
Thanks for the work!
Ian
P.S. I'll check through your script tomorrow, some of the database tables changed between 1.5.6 and 2.0, so you might need to add in a version check to be really thorough.

SoundStudio audio faded file not fading in exported QT file.

Since Keynote has no ability to manipulate audio very well, I went into Sound Studio and created the audio clip I needed with a 5 second end fade out. Saved the file and dropped it onto the audio holder area in Inspector. The file fades perfectly in SS, but when when exported to QT, the file just cuts abruptly with no fade.
I also noticed that when dragging a sound file off the audio holder box to the trash, then dragging a new file onto it, when exporting to QT I will frequently get two sound files, one over the other. Keynote doesn't seem to "trash" the file when it is dragged off the Inspector properly.
Any ideas? TIA.
G5 Dual

Jody, are the files being exported from Sound Studio regular MP3 or AIFF files? And do they fade properly in other applications (for example, if you use the preview pane in the Finder to play them, or drag them into iTunes)?
This issue seems to me more likely to be a Sound Studio problem than one involving Keynote. You might try using an application like the free Audacity to fade a test file, and see if that works in Keynote.
Although I don't know the application, my guess is that Sound Studio is somehow overlaying volume information on top of the raw sound files, information that is not getting exported to the final MP3/AIFF file.
PowerMac G5 Mac OS X (10.4.4)

Revised file will now not export all content

We have successfully created a book containing text and graghics and exported a pdf file to a publisher for review. The publisher accepted the pdf and sent us a proof copy. After adding another layer of background to most of the pages of the original file that was successfully exported, we now have several pictures that will not show up on the revised exported pdf. These pictures appear to have all the correct link data and were exported in the original copy sent to the publisher. Any ideas on this would be greatly appreciated. We have tried relinking. We have tried recreating the page. We have re-placed all the photos to make sure they were linking properly... as in when you first put a picture in you "place" it and I have re-done that at least twice. I have created a few different effects on some of the pages that are not displaying the pictures such as adding a basic feather to the outside edge. No rhyme or reason as to why they are not showing up... these same things have been done to other pages with no problem. I have looked at the display about the page and checked links and transparency and compared the pages that won't show up with the pages that do show up... I cannot tell any difference.
Please advise what to do... I am at a loss and this last little bump in the road is really holding up my work!!
I am wondering if it is adviseable to totally recreate all the pages again in a new file? I would just copy and paste the current pages into the new file. Would this work at all?
Thank you so much...
I appreciate your expertise in this matter!
Sincerely,
sih63

Do the images that don't show in the PDF show n ID when you use Preview Mode?
What colro mode are the images, and are you viewing the PDF in Acrobat, reader, or some other viewer?

Export Quicktime movie in FCP comes out as a Final Cut Pro Movie File

Does anyone know why when I Export Quicktime movie in FCP it comes out as a Final Cut Pro Movie File? I can still play it in Quicktime and it's possible to set the Quicktime Player as the default software, but it still says in my finder window that it is a Final Cut Pro Movie File.
Does anyone know if there are any settings for the clip to come out as a Quicktime Movie instead? Thank you!

+Jim Cookman :+
+"The studio apps "brand" their exports. Actually kind of useful...+
In the words of the venerable Forest Gump, "Useful is as useful does" ... or something like that.
I actually use similar "icon" techniques in other areas of my workflow. But most of the time I just modify the file title for quick ID - I also use dashes & underscores to get things to stand out and stay at the top of lists etc.
But QT is my Go-To App for quick media reference and I have it set up to play almost all types off media when double clicked. I started doing it years ago when iTunes opened up every time I wanted to check a few seconds of an mp3 file.
I guess the best solution would have been for Apple to leave the "export FinalCut movie" option intact and simply add in an "export Quicktime movie" option as well. Or maybe add another drop down option for the tagging (branding).
At least we would have been able to make the workflow choices in-the-box rather than doing it with the OS.
Andy Neil,
I think using the OS is the better option rather than re-compressing your movie just so you can double click into QT.
best
g
Message was edited by: Goldfish

Why is it that even after editing a picture under iPhoto, the original picture is still the file that is being exported?

Why is it that even after editing a picture under iPhoto, the original picture is still the file that is being exported?

because you are exporting the original?
SInce you give us no information at all we can only guess and that is the most likely
How are you editing the photo - iPhoto? An external editor? How?
how are you exporting?
Remember we are users just like you - not psychics
LN

Weird file format produced when exporting to Compressor

I em exporting to Compressor from FCP to create an MPEG 2 video. In the past, it's always produced an "_MPEG - 2 Video_." Now it's creating an _"MPEG-2 ( which is followed by a bunch of Japanese symbols)"_. Don't know why this is happening. The default app to open is now a Droplet instead of Quicktime. Also when I try to export to compressor I am getting a message of "Selection contains no media." I am able to work around this, but this is coinciding with this other problem.
I also recall that some of my MPEG - 2 files that were created as QTs have been converted (how? I don't know, but I am suddenly recalling) to this weird Droplet format.
Thanks for the help.

Hi,
this rings a bell, anyhow, here something to try:
-Try to export as QT movie self contained (this will keep identical quality) from FCP and import that in Compressor.
-- Use [this little application|http://www.digitalrebellion.com/pref_man.htm] to trash preferences of bothj FCP and Compressor (note: with preference manager you can back up and reinstall your current preferences if you wished to).
Finally something I'd rather suggest if I had more info handy, however,
--- In Compressor's main menu>Compressor>Click on reset background process then resbmit.
Any of all these help?
G.

CS5.0.3 Temp files on C during export even with scratch as E

I have a small project that uses alot of Photoshop files as graphics templates. I thought that because I set my scratch disks to "E" that whenever I would export, it would use "E" as my temp location for any temp files generated/needed during exporting. But for some reason, my exports have been crashing because I'm running out of room on my C drive during the export. I discovered that during exports, there are several Photoshop TEMP files being created on my C drive - each like 3 GB, eventually filling up my C drive. (I confirmed that I set the export render location to E) After the render/export, these Photoshop TEMP files disappear on C. Is this expected behavior? Is there something obvious I can do to make sure all files go to a separate drive? Thanks!

Adobe like many other applications use the Windows Variable Temp directory for cache files. As an example, if you export out of Premiere and select the queue to media encoder, it will show the C drive instead of the drive where the media is actually located with the Project file. That is because the source that media encoder is seeing is that Windows Variable Temp directory. You can change that by creating a Folder on the E drive called Temp. Then right click on Computer and go to properties. Select Advanced Settings on the Left and then Environment Variables on the bottom of that panel. You will see 2 Temp files and locations listed at the top of the Environment Variables Panel. Select edit and then type or copy/paste in the location of the temp directory created on another drive. Example - E:\Temp
Restart Windows and then the Variable cache should be moving to that directory. Keep in mind that Windows uses those for allot of things. So if that drive is removed or fails you will take a very long time to boot and it will boot with errors.
Eric
ADK

How can I do change File Character when I export application (4.2.1.00.08)

Hello,
Please, help me!
I need to change "File Character" when I export application with Apex 4.2.1.00.08 version, but this option, is not possible. The ComboBox already select with
"Unicode UTF-8]', but I need "ISO-8859-1 - Europa Ocidental", how can I do change it?
Thanks

Please register for a "real" user account rather than the anonymous user7266483.
You can not change it on the export...this is simply set to whatever is in effect in the DB.
However, it is totally unnecessary to change it on export. If the database into which you need to import the exported application is "ISO-8859-1 - Europa Ocidental", at the time you begin to import, it will default to "ISO-8859-1 - Europa Ocidental". You need to change this to the character set under which it was exported. In this case, it was "Unicode UTF-8".
It does not matter that you export and import in the same character set. It only matters that you correctly set the import to match how it was exported.
-Joe

How can i create my own file from the Adobe Export PDF to Word ?

How can I create my own file from the file of the Adobe Export PDF to Wodrd?

If there is handwritten content in your PDF then ExportPDF can't convert that to word.
~Deepak

I need pdf files so I can export, not hard copy. When I 'print' then 'save as pdf', I get blank docs. Why? How can it be resolved?

I need pdf files so I can export, not hard copy. When I 'print' then 'save as pdf', I get blank docs. Why? How can it be resolved?

Which version of Acrobat?
What app are you printing from?
Which version of Mac or Windows?
Do these seem to be normal PDF documents - but just blank pages? How many blank pages?

AE files 59.97 on Export 23.98 on FCP import?

Similar Messages

Maybe you are looking for