af:search shows required binding variables that is not want

Hello,
I have a WHERE clause similiar to this
... WHERE ([Binding Var 1] = 0 OR xzy_id IN (SELECT xzy_id FROM [Table] WHERE abc_id = [Binding Var2]))
When writing this to the WHERE segment of the view all binding varibales need to be required.
But when I use an <af:search> element in my jsff for searching through the table view all required binding variables are shown. I dont want that the element are shown because they are for internal use, only.
Thanks for your hints.
Greetings,
Ayhan

I haven't tried this - but what happens if you set the display hints for the bind variable to "hide?"
John

Similar Messages

Bind variable peeking does not work

Oracle 9.2.0.8
create table my_table (c number);
create index i on my_table(c);
declare
par varchar2(10);
begin
par:='qqq';
for rec in (select * from my_table t where c = par or par is null )loop null; end loop;
--USES FULL TABLE SCAN, works SLOW!!!
--but the same query with constat insted of bind variable :
for rec in (select * from my_table t where c = par or 'qqq' is null )loop null; end loop;
--USES INDEX i ON column c , works FAST!!!
--WHY bind variable peeking does not work ???
end;
Thank you for reply

sqlplus:
drop table my_table;
create table my_table as select object_name as c from all_objects where rownum<=1000;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
insert into my_table select * from my_table;
commit;
select count(1) from my_table;
COUNT(1)
64000
create index my_table_idx on my_table(c);
exec dbms_stats.gather_table_stats('bogdanov','my_table',cascade=>true)
variable par varchar2(10)
exec :par := 'www'
--FIRST CASE
explain plan for select * from my_table where c=:par or 'www'='qqq';
@?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 64 | 1792 | 3 |
|* 1 | INDEX RANGE SCAN | MY_TABLE_IDX | 64 | 1792 | 3 |
Predicate Information (identified by operation id):
1 access("MY_TABLE"."C"=:Z)
--SECOND CASE
explain plan for select * from my_table where c=:par or :par='qqq';
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 703 | 19684 | 95 |
|* 1 | TABLE ACCESS FULL | MY_TABLE | 703 | 19684 | 95 |
Predicate Information (identified by operation id):
1 filter("MY_TABLE"."C"=:Z OR :Z='qqq')
--THIRD CASE very strange.... COMPARE IT WITH FIRST CASE: 123456789 vs. 'qqq'
explain plan for select * from my_table where c=:par or 'www'=123456789;
@?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 703 | 19684 | 95 |
|* 1 | TABLE ACCESS FULL | MY_TABLE | 703 | 19684 | 95 |
Predicate Information (identified by operation id):
1 filter("MY_TABLE"."C"=:Z OR TO_NUMBER(:Z)=123456789)
Edited by: user450084 on Dec 9, 2008 5:17 AM
Edited by: user450084 on Dec 9, 2008 5:27 AM

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.

Everytime I try to send an Adobe PDF file the "verification" process shows an email address that is NOT mine. The process always fails.

Every time I try to send an Adobe file the "verification" process shows an email address that is NOT mine. Files cannot be sent because verification always fails.

Hey, Thanks again for the help. Everything is running smoothly now.
Take care and all the best,
Wade
Wade K. Woodcock CA BRE # 01375606
Keller Williams R.E. Services (Glendale, CA)
323 - 633 - WADE - (9233)        Mobile
818 - 432 - 3200                       Office
818 - 432 - 3232                          Fax
On Tue, Sep 30, 2014 at 9:37 AM, Sara.Forsberg <[email protected]>

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Is there a way to increase the icon size (and the text below) without using zoom? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me.

We connected 2 iphones to a single ipad. now the 2 iphone accounts are messed up. One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone

We connected 2 iphones to a single ipad. now the 2 iphone accounts are messed up. One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone

rdpn wrote:
We connected 2 iphones to a single ipad. now the 2 iphone accounts are messed up. One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone
How did you do that? Do you mean you sync to iTunes that had the ipad library?
The phone with the issue, settings - general - reset - erase all contents and settings - this will wipe the phone clean and then restore from your backup.

Make List of Values for Required Bind Variables

In the SQL query for my View Object, I have a bind variable, which I set to "required". In the search form resulting from a View Criteria, a textbox shows up asking the user for the value of that variable. Is there a way to make it a List of Values instead?

Hi WV,
Create a transient attribute in your VO that contains the LOV and then set the value of your bind variable to point to this new transient attribute. Also here is another approach
https://blogs.oracle.com/shay/entry/adf_query_with_parameters_and
Let us know how it goes.
-Juan Camilo

Update before a report shows with bind variable

I need to update a table before a report shows. This report have bind variable and I need bind variable value for clause where in update, how can I do that?
I would thank so much any idea

Mery,
If I understand correctly your application should display a report when it is called.
But first, before the report is displayed, you want to update a table, using a bind variable passed into the report when it is called. Do I understand correctly so far?
So while editing the report, in the last tab option you have (Additional PL/SQL Code), you need to put some pl/sql code into section titled '...before displaying the page.'
declare
begin
update table_x
set column_x = somevalue
where column_y = bind_variable;
end;
I haven't yet passed bind variables into reports so I'm not quite sure how to retrieve them, but I'm sure there are other postings here about that.
I'm mostly just trying to clarify if this is what your asking, and maybe somebody else can answer the rest of your questions.
Good luck.
Kurt

Detail view with bind variable. TreeTable not showing all detail result.

I’m having trouble with treeTable using detail view with bind variables and where clause defined in VO definition.
Both, master and detail view objects, base on the same entity and have the same condition in where clause. The view objects also have bind variables, which are set in prepareRowSetForQuery() method.
Again, these are two different views, that get different result, based on value of one of the bind variable.
When I show results in two different tables on jsf page, where master table has "RowSelection" set on "single", all results are displayed in detail table.
But when I use treeTable, only the first result of the detail is shown.

I tested it in applicationModule and it works, but i think that's the same as two tables on a jsf page.
This is the order in which overridden methods are called in ADF BC or two tables on jsf page
when clicking on row in master table.
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object; -> print of the object2[] parameter in executeQueryForCollection
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035313 -> viewLink parameter value
getEstimatedRowCount_Detail
count: 2
getEstimatedRowCount_Detail
count: 2 And when i click on "expand node" in tree table:
getEstimatedRowCount_Root
count: 2
PrepareRowSetForQuery_Detail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035321
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035313
getEstimatedRowCount_Root
count: 2
getEstimatedRowCount_Root
count: 2
getEstimatedRowCount_Root
count: 2
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035313
PrepareRowSetForQueryDetail
executeQueryForCollection_Detail user param: 2
   Object 2: class [Ljava.lang.Object;
     List 0: Bind_ChildId -> viewLink parameter
     List 1: 400035321
getEstimatedRowCount_Root
count: 2
getEstimatedRowCount_Root
count: 2Values of user parameters are OK. Is there another method that i should override?
I also noticed, that if detail view doesn't have user bind variables, the tree works fine and is shown even in ADF BC (aplication module).
I guess we loose a tree, when using bind variables in detail view object.
Is there a way around it?

Oracle BI Publisher - Passing multiple wildcard search to a bind variable

Hi,
Please help me in resolving the below mentioned issue:
I have developed a report in oracle BI Publisher with a SQL query.
While scheduling the report to run I used to pass mutilple parameters like CGAMSVC08,RLCSVC51
If the pass the parameter with wildcard search like C% it works.
When I pass two or more parameter values with wildcard search like C%,R% its not working.
Could you please let me know how should I give the bind variable in the SQL query. Currently I'm paramater like the one shown below for passing multiple paramaters:
Where (',' || :PRMRETRID || ',' like '%,'||RL.RETROFIT_ID|| ',%')
Edited by: user1101445 on May 23, 2012 2:02 AM

HI Tyler.
Well, here's the latest.
I found this little gem in the BIEE 10.1.3.3.3 Release Notes Documentation...
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, and 10.1.3.3.3.
Reports that use the BI Publisher data template as the data model may fail with the
following error: "Data not defined."
This error will occur if you defined a parameter in your data template but you do not
pass a value to it via the user interface. If you do not specify this parameter in the "Parameters" section of the report definition that you created using the BI Publisher Edit Report interface, then you will receive the error.
To work around this issue, either define the parameter in the Edit Report interface or remove the parameter from the data template.
That bit is now working.
Having set this up and using your guide it works if my SOAP parameters declaration passes a single value like this...
<parameterNameValues>
<item>
<name>P_INVOICE_ID</name>
<multiValuesAllowed>true</multiValuesAllowed>
<values>
<item>16641</item>
</values>
</item>
</parameterNameValues>
But if I try and pass two or more like this...
<parameterNameValues>
<item>
<name>P_INVOICE_ID</name>
<multiValuesAllowed>true</multiValuesAllowed>
<values>
<item>16641,18421</item>
</values>
</item>
</parameterNameValues>
BIP states "java.sql.SQLException: ORA-01722: invalid number"
My SQL where clause is..
<sqlStatement name="Q1">
<![CDATA[select * from vw_invoice_summary
where invoice_summary_id IN (:P_INVOICE_ID)]]>
</sqlStatement>
And the BIP error records the parameter value as P_INVOICE_ID 16641,18421 (which are legit invoice IDs)
In summary, works if I pass one invoice ID, fails if I pass two or more.
Any ideas? Or do you reckon this is now a post for the BIP forum?
Kind regards.
Simon

Running page in which VO requires bind variable values

Hello,
New to this.
I’m running the HierarchyPG (Manager Self-Service) in JDeveloper 9i and it has several VOs expecting bind variable values. What is the best way to supply these values for running the page? Project compiles but receive error message: java.sql.SQLException: ORA-01008: not all variables bound
Thanks for your time.
Richard

Thanks for quick response Gyan. I realized I had OA Developer Run Option and not OA Diagnostic. My page runs now.

BEx: How to change a Query Variable that is not visible in Filters List?

Hello Experts,
Good day, I'm currently editing an old query, I am changing the Query Variables with new ones, but I found one variable that I cannot replace.
Please see the screenshot below, in the Query Properties Window [Variable Sequence Tab (right side of picture)] the Variable that I am trying to replace (Unit) is visible. But when I look for the variable in the "Filter Tab" (left side of picture) under Characteristic Restrictions, it doesn't exist in the list.
How can I find this Variable and replace it with a new one?
Other reports are still using this variable so it will impact the other reports if I simply edit the variable. So I need to replace it with a new variable instead.
Thank you for your time.

Hi,
SInce you are searching for a variable for Unit, look into below screenshot and navigate to the variables.
First click on drop down and select 'Entry for variable' then you will get lisl (after you click on drop down in 'Target Unit' drop down option.
Normally these type of variable called 'Formula Variable' try editing any of the formula and locate the option as shown below,
Hope it helps! don't forget to update the final solution and mark the correct/helpful answers.
Remember it will help others to find the solution and motivate the members to answer your question.
Thanks,
Umashankar

IMovie searching for files for project that does not exist...

Whenever I fire up iMovie 09 on Lion, it spins, and then tells me it can't find a video file for a project that does not exist. That is, it says 'File xxx.mov from project 'Movie 1 cannot be found - without this file the movie cannot be played.' The project is one I deleted a long time ago, and does not appear in the project list. How can I force iMovie to forget about this?
Thanks!
PS the specific error is 'Searching for movie data in file "New Project 1 - Large.m4v". The only button is "Stop". so I press that, then a new dialogue box saying 'The movie file 'New Project Large.m4v" cannot be found. Without this file, the movie cannot play properly." It has cancel and search buttons. Obviously, searching doesn't help - it was deleted a long time ago. Cancelling makes it go away until iMovie is launched again.

Whitecity,
This is awesome.
So moving forward from here, you can narrow down which event is causing the behavior but systematically trial and error. Once you determined the exact event folder, there are subfolders underneath:
/iMovie Movie Cache/
/iMovie Stabilization/
/iMovie Thumbnails/
Try removing these to see if iMovie rebuilds them.
Calbe

af:search shows required binding variables that is not want

Similar Messages

Maybe you are looking for