After 11g upgrade - catalog objects not showing up

Hi,
We have recently upgraded from 10g to 11g.
Our repository is working fine, but the presentation services does not contain our objects.
I hav granted all privs to BIadministrator role and I belong to the BIAdministrators Group.
But, all of our contents are missing, dashboards, subject areas, prompts, etc.
Any idea what step I am missing here?
Thanks,
Kathy

Is your installation client only .? Then its a known bug, you cannot open catalog in Offline Mode client-only installation. Catalog Manager is only available with OBIEE Server Full components install on Server.
Bug 14020946 : CATALOG MANAGER DOES NOT DISPLAY OFFLINE IN OPEN CATALOG
Few questions here:
What is your authentication system ? Is it default ?
Are all your the Subject area permission is set to Default in repository. If that Default is set to ‘NO ACCESS’ so may want to change default setting to ‘READ’.By default all users can see the subject area if we manually give him Read access in Subject Area Permission.However, if this is set to NO ACCESS in NQSConfig.ini then change this to READ under [SECURITY] DEFAULT_PRIVILEGES = READ;
Could you also generate Permissions Report in RPD and for a few subject areas and then see if the permissions are setup right in repository for that Roles ?
Hope this helps. Pls mark if it does.
Thanks,
SVS

Similar Messages

  • I updated my iphone 3g ios from 2.2 to 4.1, after the upgrade my iphone keep showing no service even if i insert a sim card. Any help please.

    I updated my iphone 3g ios from 2.2 to 4.1, after the upgrade my iphone keep showing no service even if i insert a sim card. Any help please.

    Jennyccc wrote:
    What can I do to fix it
    Jailbroken devices are not support by this forum, or by Apple.  Apple reserves the right to refuse activation to any iOS device that is currently, or previously, been jailbroken.

  • I re-formatted my pc and changed its name and user name. But after formatting firefox sync is not showing my previous bookmarks.

    Hi guys i Formatted my pc and after formatting now firefox is not showing my previous bookmarks
    I changed my computer name and user name
    and i dont remember what was previous name of my computer

    Did you reset the password of the Firefox account or did you still remember the password?
    The new Sync version used in Firefox 29 and later still uses a Sync key to encrypt data locally before uploading, but this Sync key is generated internally from the password of your Firefox account, so you no longer need to worry about it.
    This also means that the Sync key changes when you change (reset) the password of the Firefxo account and you lose all data stored on the Sync server when doing that.

  • I upgrade my iPhone 5s to 8.0.2 after which my phone does not show recent on missed calls in the call log.is it because of the upgrade hw do change my settings!

    iphone 5s 16 gb....iOS 8.0.2.....seems to be happening after the upgrade...tried resetting the network settings ..tried hard reset...

    azwanelias wrote:
    my iphone 5s is jammed after downloading IOS 8.0.2 and now i cant use my iphone and it has the sing of itubes in RED which is wired how can i get my phone to work? and its not letting me restore on itunes of my PC
    I don't really understand your comment about "sing of tubes in RED which is wired". But if you are referring to the display of iTunes and the USB port that is an indication that you must restore your iPhone by connecting it to your computer via USB and then using iTunes on the computer to restore it.

  • When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

    Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE' must be declared after 11g upgrade

    Hi,
    I just uograded my dev database to from 10.2.0.4 to 11.1.0.7.2. During the testing phase of the upgrade, I had come up wiht scripts to execute after the upgrade to 11g so that my utl_smtp packages will run. But now, after upgrading to 11g, when I run these scripts, I get the below error -
    ORA-06550: line 4, column 33:
    PL/SQL: ORA-00942: table or view does not exist
    ORA-06550: line 4, column 3:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 6, column 4:
    PLS-00201: identifier 'DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE' must be declared
    During the testing phase, I installed 11g instance and created an 11g database and then imported the 10g objects into the 11g database so as to test the application. Now, I think what happened is when I upgraded my 10g database to 11g using DBUA, it did not install APEX. I ytried to configure APEX by following instructions from this site - http://www.oracle.com/technology/obe/11gr1_db/install/apexinst/apexinst.htm and this gives me error the error -
    PLS-00201: identifier 'DBMS_XDB.SETHTTPPORT' must be declared
    How do I install apex?Can someone please guide me this?
    Thanks

    Hi, Ogan, I got this resolved.
    After the upgrade by using DBUA, I tried to execute scripts to configure ACLs since my database has dependent objects. That's when I got error saying that dbms_network_acl_admin was not found.
    when I queried DBA_registry , it didn't list XDB as one of the components. So, I understood this didn't get installed during the upgrade with DBUA. So, I installed XDB manually by running catqm.sql. This however created a lot of invalid objetcs which wouldnt get validated after tryign to recompile them with utlrp.sql. Most of the errors were looping chain of synonyms. Finally, I de-installed it and re-installed xdb and ran utlrp.sql to validate all the invalid objects. Now, everything is fine.
    I guess xdb doesn't get installed during the dbua upgrade and maybe it needs to be installed seperately. But, that's kind of confusing because xdb is supposed to be a mandatory component in 11g. Can someone please clarify this?

  • My Lightroom 5 upgrade serial number not showing up on My Products page; chat support useless

    I purchased a Lightroom 5 upgrade license on July 25th.  I didn't receive a confirmation email but my serial number was displayed on the order summary page after purchase.  I tried registering the serial number repeatedly through the My Products page but for some reason the serial number wasn't showing up, even though the registration process reported a successful result.  Furthermore, Adobe products bought from the Adobe store should automatically be registered according to Adobe's web site.  Apparently this must have failed.  I need to reinstall Lightroom 5 but the serial number is still not showing up on the My Products page.  I just spent an extremely frustrating hour with Adobe "Live" chat who did nothing but send me in circles and repeat the same canned responses over and over again.
    I'm currently on hold with "phone support" but I'm not optimistic as I've been on hold for 28 minutes.  The only other support option was a link to this forum, hence this post.  Hopefully someone from Adobe can retrieve my serial number and contact me.  Failing this my only other option will be to contact VISA and open a claim.
    My comical-if-it-weren't-so-sad conversation with Adobe support:
    Hi, there are 36 customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
    Hi, there are 35 customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
    Hi, there are 31 customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
    You are now chatting with Bhagawan.
    Bhagawan: Hello! Welcome to Adobe Customer Service.
    Joel: Hello
    Bhagawan: Hi Joel.
    Joel: I need to reinstall Lightroom 5 but my serial number is not showing up under My Products & Services on the website
    Joel: I bought a Lightroom 5 upgrade back in July
    Bhagawan: I will be glad to check and help you with this issue.
    Joel: For some reason the product registration is not showing up under my account. I have my VISA transaction info if it helps you find my purchase.
    Joel: Thanks
    Bhagawan: I'll be right with you.
    Joel: ok
    Bhagawan: Okay.
    Bhagawan: May I know the email address, please?
    Joel: ******
    Bhagawan: Thank you.
    Bhagawan: Let me check on this.
    Bhagawan: For security reasons, could you verify your complete name and billing address as mentioned on your account please?
    Joel: Sure:
    Joel: Joel ****
    Joel: **********
    Bhagawan: Thank you Joel.
    Bhagawan: Joel, I see that your serial number is registered under your adobe account, please sign out and sign in your adobe account click on My Products and service information to retrieve the serial number.
    Joel: I only see Lightroom 4 ... not Lightroom 5.
    Joel: But I'll try
    Joel: Give me a sec
    Bhagawan: Sure.
    Joel: Nope...still only shows Lightroom 4
    Joel: Products in use Version Platform Registration date Lightroom 4 Mul October 4, 2012 Register new products
    Bhagawan: Okay.
    Joel: Not sure why it isn't showing my upgraded license for Lightroom 5
    Bhagawan: Please give me a minute or two.
    Joel: ok
    Bhagawan: Sure.
    Bhagawan: Thanks for staying online.
    Joel: np
    Bhagawan: Joel, In this case, I'll transfer this chat to our Concern Team to check and help you with the serial number.
    Joel: ok
    Bhagawan: Please stay online.
    Joel: ok
    Please wait while I transfer the chat to the appropriate group.
    You are now chatting with Naveen R.
    Naveen R: Sorry for the wait. Please do stay online.
    Naveen R: Hello! Welcome to Adobe Customer Service.
    Joel: ok
    Joel: Hello
    Naveen R: Hi Joel.
    Naveen R: I understand that you are unable to locate the serial number.
    Joel: I purchased Lightroom 5 on July 25, 2013 as an upgrade for Lightroom 4. I need to reinstall Lightroom 5, but my serial number is not showing up in the products & services page.
    Joel: I looked through my email receipts and couldn't find an order confirmation (or anything from Adobe related to my recent purchase.) After purchasing the upgrade, the serial number was displayed and I thought I had registered it using the Adobe account portal
    Joel: Apparently, this didn't work. I have my VISA transaction information if required.
    Naveen R: Thank you for the information.
    Naveen R: I will be glad to check and help you with that.
    Joel: Thanks
    Joel: As I mentioned to the previous agent, when I got into My Products on the Adobe portal, I can see my Lightroom 4 info, but the Lightroom 5 Upgrade info isn't there.
    Joel: got = go
    Joel: sry
    Naveen R: Thank you for waiting. One moment please.
    Joel: ok
    Naveen R: I'll be right with you.
    Naveen R: Sorry for the wait. Please do stay online.
    Joel: ok
    Naveen R: Thank you for waiting. One moment please.
    Naveen R: Sorry for the wait. Please do stay online.
    Joel: Will it take much longer?
    Naveen R: Let me check on that.
    Joel: Are you alive?
    Naveen R: I'm sorry due to application error I'm unable to check on that.
    Joel: Can I please get a phone number to call? My only other choice would be to open a claim with VISA for fraud since Adobe seems unwilling to help in this matter
    Naveen R: I will provide the steps to locate the serial number on your Adobe account.
    Joel: I already know how to look for a serial number. The problem is that it doesn't show up in the Adobe account portal.
    Naveen R: Please login under a different browser.
    Joel: Already tried. Used IE then Chrome
    Naveen R: Delete the cookies refresh your browser.
    Joel: Same problem
    Joel: Please provide me with a number to call
    Naveen R: *Once you login to the Adobe account, click on "My products" under the "My products and services".
    Naveen R: *There you can locate the serial number which you have registered.
    Joel: I've already done that.
    Joel: It is NOT listed
    Joel: Which I've been saying for the past 40+ minutes
    Naveen R: May I know the email address you logged into Adobe account?
    Joel: ******
    Naveen R: Thank you.
    Joel: ...
    Naveen R: Thank you for waiting. One moment please.
    Naveen R: I see that your serial number is registered under your account.
    Joel: Lightroom 5
    Naveen R: I will provide you the serial number via email after ending this chat.
    Joel: ok but please make sure it isn't Lightroom 4 but my Lightroom 5 serial number
    Naveen R: Yes. Due to some technical error you are unable to locate it.
    Joel: ok please send the serial number
    Naveen R: Sure.
    Naveen R: Is there anything else I can help you with?
    Joel: No
    Naveen R: You are welcome.
    Naveen R: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
    This chat session has ended.
    Thank you for contacting Adobe.

    OK, I was able to recover my previous system's image and thankfully it appears you can get the serial number from Help->System Info.  I attempted to register the serial number again via the My Products page and while it indicated that the registration was successful, we'll see.  At least I should be able to install LR5 on my new machine now.
    Edit:  I also just discovered that the serial number is listed under My Orders, but not under My Products.  Weird.  In my defence , I never thought to check My Order history because I never received a confirmation email and the order wasn't listed after purchase...even as late as mid-August (when I last checked.)  Very strange but it's all good now.
    Edit #2: OK now I just feel silly.  I just received an email from Naveen with an actual support case AND the correct serial number.  So, I stand corrected.  The Live Chat process still felt incredibly long with some seemingly canned/automated responses but, in all fairness, he did get back to me.  Thank goodness I washed both feet today...

  • Post EhP4 Upgrade - SUIM does not show Composite Role report

    Hi
    I'm having trouble in SUIM after we upgraded to EhP4. Specifically in the Roles by complex criteria selection.
    When a list of single roles is displayed, I select a role and click on Contained in Composite roles (3-arrow button)
    Instead of showing me the list of comp role that selected single role is found in, I get a collective list of all the single roles that are located in the same composite roles as the selected single role is found in.
    Any help out there?
    Regards,
    Yergat

    Hi,
    Refer the below SAP Notes:
    SAP Note 1393940 - SUIM| Incorrect results when searching for profile and roles.
    SAP Note 1543140 - SUIM|RSUSR070 long text, USER_COMMAND_AGR
    Regards,
    Raghu
    Added a new SAP note, which is also relevant

  • After Effects Rendered Color Correct Not Showing In Premiere

    Hello all,
    I have recently made a short film with a few effects in Premiere and After effects CS4.  I have used the Dynamic Link to accomplish this.  I have added color correction with Color Finesse in After effects.  The problem is I some of the color correction is not showing up in Premiere once it has finished.  Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well.  I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
    Is anyone else haveing this problem?
    Do you think it's something wrong that an update will fix?
    Maybe a new codec?

    Mylenium is correct, the LE version of Color Finesse included with CS4 is for use in After Effects only. To use Color Finesse inside of Premiere or AME you'll need to upgrade to the full PI version. You can find information on available upgrade paths at http://www.synthetic-ap.com/cfupgrade
    And if anyone has the PI version and the color correction is disappearing when rendered by AME, be sure to update to the latest version of Color Finesse. Version 2.1.10 corrected an issue that would cause that symptom.

  • After Leopard upgrade external drive not mounting

    Ok, after finally getting through the dead blue screen issue I have Leopard up and running.
    New problem, my external USB hard drive (I/O Magic 80GB USB 2.0) will not mount. I've used this drive up to and including the day I started the upgrade as my backup drive. Now when I plug it in it does not mount, I cannot see it listed in Disk Utility and it does not show up in the System Profiler. Can anyone suggest what I need to do to get this to work?

    Update:
    I brought it (third time's a charm?) to the Apple Store once again: the iMac, the WD My Book, my cables, etc. They tried it; no luck. They tried the My Book in their computer (think it was a MacBook running Leopard) with my cable; showed up no prob.
    One other interesting thing this tech did was look in Apple Profiler for Firewire, where there was an odd Warning in red that no Firewire devices could be found. (This while plugged in to 400 Firewire port w my cable.) Then tried it plugged in to my iMac w 800 Firewire cable; voila! It appeared! Then tried another device in the 400 slot; it showed up fine. (huh?) Tried a different 400 FW cable w My Book in iMac, no luck.
    The tech looked bemused. He sold me an 800 FW cable and told me to try sending the cable back to Western Digital.
    Meanwhile, twelve days after contacting WD about this problem, they responded with this link:
    Thank you for contacting Western Digital Customer Service and Support and I apologize for the delayed response.
    We have seen a couple of issues with Leopard.
    The following link Addresses formatting issues with certain drives used with Time Machine
    (specifically, single-partition MBR drives greater than 512 GB in size as well as NTFS drives of any size and partition scheme). http://docs.info.apple.com/article.html?artnum=306907
    The following link addresses the latest release updates to the Leopard operating system 10.5.1. http://www.appleinsider.com/articles/07/11/12/latestmac_os_x_10_5_1_build_fixes_finder_data_lossissue.html
    I haven't used Time Machine yet (will get different external for that if I decide to) so the second link was more applicable to my situation.
    I did just install 10.5.1 a couple days ago, it didn't resolve this for me; since other devices worked in the 400 port, the tech thought perhaps it was a software issue...<grin>
    Hope others have equally simple solutions..

  • After effects color corrected clip not showing correctly in Premiere

    Hello all,
    I have recently made a short film with a few effects in Premiere and After effects CS4.  I have used the Dynamic Link to accomplish this.  I have added color correction with Color Finesse in After effects.  The problem is I some of the color correction is not showing up in Premiere once it has finished.  Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well.  I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
    Is anyone else haveing this problem?
    Do you think it's something wrong that an update will fix?
    Maybe a new codec?

    Describe the exect DL steps you took.

  • Objects not showing in Layers panel

    Hi,
    I am using Indesign CS4 on a Mac 10.6.8. I have a problem with my layer panel --> it does not show a disclosure triangle, hence i cannot expand a layer to show its objects. The objects are definitely on the layer - if I click "select all objects on layer" all objects are indeed selected so technically they are on the layer --> i just can't see the drop down in the layers panel.
    I tried simple things such as enlarging the panel to checking for missing fonts (i read that there are often problems w/ Verdana in the layers panel..) to restoring the preference settings.. nothing worked and i couldn't find a single forum entry on this issue..
    The file i'm using is from a plug-in for a photo book, however, the layers panel does not work correctly even if i create an entire new document..
    In Illustrator it works perfectly, showing all objects and paths on a layer..
    Thanks soo much for your input and help!
    Laura

    Oh, I see. I didn't realize that since in my CS4 Illustrator I have already the "enhanced" layers panel.. So how do I re-assign existing objects to a new/different layer then if not by drag-and-drop in the panel?
    Many Thanks!!

  • Button for services for object not showing for FB03

    Hi,
    I have a created a Zcopy of transaction FB03.
    But the button for services of object which contains attachment list and other features is not showing up in my Z trasaction.
    Does anyone know the reason or the functionality behind this button.

    Create a replica Z prg of the std prg SAPMF05L and assign a Z tcode to it.

  • Adobe Flash 11.9.900.152: objects not showing in print preview and not printing

    When I select print from Adobe Flash 11.9.900.152, objects are not showing in print preview and not printing on the printer.   I have tried to print from both MS Internet Explorer and Google Chrome--neither work.
    I am using:
    Windows 7 Home Premium Service Pak 1
    Internet Explorer 10.0.9200.16618
    or
    Google Chrome 31.0.1650.57 m
    How do I resolve this issue?

    What is it you're trying to print?

  • Upgraded kernel info not showing in System info page

    Hi all,
    We have upgraded our EP 7.0 from SP11 to SP 15 with kernel 146, all the components are showing up fine after the upgrade means SP level SP15 , but kernel still showing the same old kernel info  in the system info page.
    I have checked from the OS it's 146 there, i have checked at the VA also it's also showing old kernel info.
    I have tried changing the mode of SDM to integrade  and  systemcomponents to active still same result.
    Please suggest ..
    Thanks,
    Subhash.G

    Hi,
    SDM deals only with Java components, so it has nothing to do with the Kernel.
    To update the Kernel
    1. Stop the system
    2. Extract SAPEXE.SAR & SAPEXEDB.SAR in the directory pointed by DIR_CT_RUN profile parameter, this is usually SYS/exe/[n]uc/<platform>
    3. Start the system
    Make sure you extract the correct archives for your OS and DB.
    Different instances of your system might user different Kernels - UNICODE/NONUNICODE or different OS.
    Make sure to update all Kernels to same patch level.
    Normally the system is setup to replicate Kernel binaries from the central file system (DIR_CT_RUN) to instance local directory (DIR_EXECUTABLE) via sapcpe. This happens during system startup (you can find sapcpe in START profiles). The instance starts the executables from DIR_EXECUTABLE (<instance>/exe) directory.
    Best regards,
    Petar
    JSPM

Maybe you are looking for